Error when activate Info Object

Hi everybody.
Maybeyou can help me.
I made a transport to the production system.
The system was disconnected when i made the transfer. The transportation has fail, however, has generated objects in the target system.
In particular I have a problem with a standard InfoObject (0GN_BWBEOTY).
This object was transported to Production environment but has been inactive.
I can not activate it.
I used the transaction RSRV InfoObjetct, to validate integrity and I get the following errors:
CL_RSMD_RS_0GN_BWBEOTY Class, Method IF_RSMD_RS_ACCESSS ~ get_text.
"RSBWBEOTY" is not defined in the ABAP Dictionary as a table.
I tried to move into a new transport order, the only InfoObject but I get error code 12.
Someone has happened, can you give me ideas? what can i can do?
Thank you very much for help me!

Hi!
Thank you for your help.
I still have the problem .
I can not verify whether the information in master data, since the transported infoObjetct not appear in the RSA1 (production) and can not display the master data RSDMD trx.
And i can not activate through RSDG_IOBJ_ACTIVATE. I get the error message detailed in the first post.
This is the transport log:
       |   Program terminated (job: RDDEXECL, no.: 15123000)
|      See job log
|   Execution of programs after import (XPRA)
|   End date and time : 20110519151246
|   Ended with return code: ===> 12 <===
|   ######################################
This is te JOB Log:
19.05.2011
15:12:31
Job started
00
516
S
19.05.2011
15:12:31
Step 001 started (program RDDEXECL, variant , user ID DDIC)
00
550
S
19.05.2011
15:12:31
All DB buffers of application server SFESA-20 were synchronized
PU
170
S
19.05.2011
15:12:36
Internal session terminated with a runtime error (refer to ST22)
00
671
A
|19.05.2011 |15:12:36 |Job cancelled
Any ideas?
Edited by: Javier Sarrelli on May 20, 2011 8:14 PM

Similar Messages

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when transporting ODS Object

Hi All,
I got the following error when transporting ODS object.
"The creation of the export DataSource failed"
"RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
"Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
Maybe somebody can help me.
Thanks a lot and appreciate that,
-Martin-

hi Martin,
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

Error while creating info object

error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALL

Hi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

Activate Info Object in Back ground

Hi
Experts,
Is there any option to Activate Info Object in Back ground
Regards,
Kiran

hi Kiran,
Go to RSD1, put in your infoobject and click on change and go to the menu option, characteristic and there you will have an option of Activate in Background...
Hope it helps...

Error when activate Transformation to cube 0IC_C03

Gurus:
I need to activate the 2lis_03_bf_tr transformation to cube 0IC_C03, when I activate the transformation, the system indicate the next error:
"E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE"."
I made changes in the routine, but the error still happens
Thanks for your help!!!!
César.

It seems like you have migrated the 3.x data source to 7.0x version. And I believe you have added new info objects. In the start routine code add the new info objects to the structure "_ty_s_*_" whenever you add new fields.
In the code in the
"Rule Specific Types"
"Types"
"BEGIN OF tys_*_"
Add the info objects.
*Please assign any rating if you find the answer helpful*
Edited by: ram.pch on Jul 2, 2011 6:02 AM

Error while creating Info Object in Info object catelog

Hi experts,
I'm making few info object in info object catelog but while activating system giving error mesage as "Error when generating master data routines"
can any one tell what's the problem and what needs to be done.
Sumantra

Hi
let me know weather r u using any reference object which contain the routinee.
regards,
chandra.

Error when acivating Info Source

Hi
I get an error when I try to activate an info source 0TRANSTYPE. It activates fine on BW dev. Transports fine to BW QA, but gives an error on BW prod.
The error it gives me is :
u2022 Error when creating transfer structure /BIC/CCLC0TRANSTYPE_ATTR in source system 90
I did try to reactivate the DataSource on the source system.
I also replicated the DataSource in the BW system and ran RS_transtru_activate_all after the transport to our BW Production system. But no luck.
The thing is, it works fine on the Development and QA servers.
Do you have any suggestions on what else I can do?
Much appreciated.

Hi Arun
Thanks for getting back to me.
1) Both the QA and Prod system changeability is the same( This is the only infosource that I get this message with).
2) I also did a replicate an the source is visible for that source.
3) the error I get is R1304 - Error when creating transfer structure /BIC/CCLC0TRANSTYPE_ATTR in source system 90
Regards
Mervyn

ERROR IN ACTIVATING INFO OBJECT

GETTING AN ERROR WHEN I TRIED ACTIVATING THE INFOOBJECT. ERROR I GOT IS,
" ERROR GENERATING MASTER DATA ROUTINES."

This is an ABAP report which can be used to check the consistency of the Objects related to SID values, Nav attribute, Object versions, values check for MD attributes,,,etc...
In case of any errors, you can see the detailed log here and repair as well...
Pls use this to identify the errors in your IOBJ and correct accordingly!
Hope this helps.
-VA

Error in transporting info-object

Hello Experts,
We need to a import an info-object from Quality to Prod.
From Dev to Quality the transport was successful, but while transporting from
quality to prod we are getting the following errors:
Changes cannot be made, display user only
And as a result the info-object and hence the info-object,transfer rules/Transformation etc are
now inactive in the prod. enviornment.
Could anyone advice on what may be the source of this error??
Thanx and Regards
Priyanka

Hi Priyanka,
Pls check below threads, may be it will helpfull to you.
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6720353
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6407281
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6407210
Thanks & Regards,
Ramnaresh .P.

Error in transpoting info object

Hello,
Need help to solve this please!
I am getting an error while tranporting an info object!
Error 1 with function module RSDRX_FILL_INITIAL_PQTABLE (Fill Master Data)
Message no. R7195
Diagnosis
Possible causes:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me please!
Regards
RAm

Hello,
Help me to solve this !
I cant transport the info object !
It says:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me!!
Regards
Ram

Error when activate I/O: inconsistency DD - DB

Hello gurus,
I modified the IO 0COSTELMNT in Dev system, I added two custom IO as attributes.
I modified the transfer rule and Communication Structure.
I transported the modify with success and I load the master data in order to populate the new attributes (in Test and then Production system ).
Looking the values I realized that the new attributes were time dependent, maybe by my mistake.
Then in Dev system I deleted the flag "Time dependent" for the two new attributes in the section "Detail/Navigation attributes" of IO 0COSTELMNT.
When I transported this last modify I received the error:
Char. 0COSTELMNT: Attribute ZCOSTELMP is time-dependent (cannot become time-independent)
Message no. R7583
Diagnosis
You have changed the attribute ZCOSTELMP for characteristic 0COSTELMNT from time-dependent to time-independent. An analysis of the master data found that, over time, various values existed for the attribute. The attribute is therefore time-dependent.
System response
You can not change the attribute to time-independent.
Procedure
You first have to delete master data from characteristic 0COSTELMNT so that the ambiguous forms of attribute ZCOSTELMP will disappear over time. Only afterwards can you change the attribute to time-independent.
Then I restore the flag "Time dependent" for the two new attributes in Dev system and I re-trasported the modify in Test system.
I receive this error
No active nametab exists for /BI0/QCOSTELMNT
Termination due to inconsistencies
Table /BI0/QCOSTELMNT (Statements could not be generated)
DDIC Object TABL /BI0/QCOSTELMNT has not been activated
Error when activating InfoObject 0COSTELMNT
Characteristic 0COSTELMNT is blocked by conversion
I check the table /BI0/QCOSTELMNT in the ABAP dictionary, I received thi error
/BI0/QCOSTELMNT : inconsistency DD <-> DB (check table with analysis tool).
How can I resolve this problem? My BW version is 3.50.
Gianni

The activation is unable to adjust new columns/attributes with existing ones at DB level....so delete all values in IO tables.
Use se14 to further clean up individual tables.
CAUTION: You might have to make the same clean in PROD....so this will result recomputation on SID...

Error when activate analytic view (join tables)-Exception during activation

Dear guru,
I suffered an error showed "Exception during activation" when activate a newly created analytic view.
I used two tables, one is NASDAQDAILY, one is NYSEDAILY.
Private attribute are "DATE, STOCK(NYSE.STOCK), STOCK_1(NASDAQ.STOCK"
Measure are "PRICEOPEN(NYSE), PRICEOPEN_1(NASDAQ)"
JOINS are: Left Table-NASDAQ, Left Column-DATE
Right Table-NYSE, Right Column-DATE
Validate is sucessfully.
But when "Save and Activate", it gave below error.
Kindly help me on this. Thank you so much.
com.sap.ndb.studio.sdk.resource.deployment.bi.DeploymentException: Error during deployment
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeElement.processMeasures(CubeElement.java:591)_
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeElement.initialize(CubeElement.java:170)_
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeSchemaRoot.initialize(CubeSchemaRoot.java:80)_
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.DeploymentExecutor.initialize(DeploymentExecutor.java:159)_
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.CubeDimensionDeploymentExecutor.initialize(CubeDimensionDeploymentExecutor.java:78)_
_     at com.sap.ndb.studio.sdk.resource.bi.core.impl.BiResourceImpl.activateObjects(BiResourceImpl.java:236)_
_     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceImpl.activateObjects(ResourceImpl.java:868)_
_     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceImpl.activate(ResourceImpl.java:727)_
_     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceManager.activateAll(ResourceManager.java:166)_
_     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceManager.activateAll(ResourceManager.java:202)_
_     at com.sap.ndb.studio.modeler.job.type.activate.ActivateJob.activateObjects(ActivateJob.java:92)_
_     at com.sap.ndb.studio.modeler.job.type.activate.ActivateJob.run(ActivateJob.java:71)_
_     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)_

Hello,
This issue is resolved now.
The problem was with the file system space on the Unix server(on which portal is installed).
The server administrators and the Basis team extended the disk space and issue got resolved.
Thanks for all your inputs.
Sonali.

Error when activate the Adobe forms

Hi,
I am getting the below error message when activate the adobe forms,and the message tells that to install a forms design tool,please tell me which tool in need to install and where i will get this tool.
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Also read SAP Note 801524.
Thanks,
Deesanth.

FIrstly, you have posted the question in the wrong forum. There's an entire forum in SCN only for Interactive Forms: .
Secondly, this is a frequently asked question, especially in the Interactive Forms Forum. There's enough information there to get your query solved by searching.
pk

Error when activate Info Object

Similar Messages

Maybe you are looking for