Error when activating Cube with Non-cumulative KF

Hi all,
I'm trying to re-activate an InfoCube but now with non-cumulative KF and I'm getting the error message "Object YYYYY could not be activated".
Please help!
Best regards,
Thiago Modro

hi,
have you included the neccessary time characteristics
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Ramesh

Similar Messages

Error while activating cube contains non cumulative key figures

Hi all,
when i am trying to activate a cube which contains non cumulative key figure it is showing out the following error:
DDIC Object TABL /BIC/LZATTR1NON has not been activated
Table /BIC/LZATTR1NON could not be activated
Please let me know if any one come across with such error
Help are appreciated

Before activating an infocube with non-cumulative keyfigures, the system
design forces the user to enter at least once the screen: maintain
non-cumulative values (validity table). If that step has been performed, activation will work fine.
In the meantime, please do this step explicitly, at least once, when
configuring such an infocube, then you should not have any problem.
Please follow the same process while activating the infocube
Goto Infocube ->Goto Change mode->Menu ->Extra-> goto the screen:
maintain non-cumulative values once.
Walter Oliveira.

Archive Stock Cube with non-cumulative nature

Hi All,
I have been trying to archive the Inventory (Stock) Infocube as we have more than couple of hundread million records in the cube and it is taking long time to execute query.
I know how to acrive the regular cubes and DSOs, but I couldn't find any helpful documentation where I can know how to archive the Infocube with non-cumulative nature or containing Marker update.
Can anyone pleaes post the link of document?
BTW, we are using BI7.0 SP15
Thanks,
Dhaval

Hi,
There are two ways of archiving data from a non-cumulative InfoCube - time slot archiving and archiving with selection characteristics.
Time slot archiving (recommended)
As an archiving method, you must choose for a non-cumulative InfoCube, time slot archiving for the time reference characteristic. When you recreate an archiving object for a non-cumulative InfoCube, this characteristic is also suggested by the system.
Only archive non-cumulative changes up to a specific point in the past. This reduces the volume of data in the InfoCube. The marker (= end non-cumulative) remains unchanged.
In the variants maintenance screen, in the archive administration, under Non-Cumulatives, choose the Movements Only option.
You are only able to archive the marker if you also archive all of the non-cumulative changes. Subsequently, the contents of the non-cumulative InfoCube are archived completely. In the variants maintenance screen, in the archive administration, under Non-Cumulatives, choose the Movements and End Non-cumulative option.
You must archive the non-cumulative changes (for all times) first, and then archive the marker in a separate archiving run, so that the non-cumulative changes and the marker are stored separately in the archive.
The advantage of time slot archiving is that archiving runs can be carried out periodically using a single variant with a relative time restriction. The alternative archiving method described below does not have this advantage.
Archiving with selection characteristics
In some cases, archiving based only on time slots does not have the required effect of reducing the volume of data in the InfoCube. This is the case, for example, if the non-cumulative bearing objects are subject to high fluctuations, meaning that data is constantly being loaded for new objects and old objects are made obsolete. With time slot archiving, the end non-cumulative remains for all objects until all of the data in the InfoCube is finally archived, even if all the non-cumulative changes for an object have been archived already.
In this case, you want to archive and delete completely any objects that are no longer active in the InfoCube. This means archiving the marker as well. For other objects that are still active, you only need to archive the non-cumulative changes from the past, which means the marker is retained.
When you define the archiving properties for a non-cumulative InfoCube, do not therefore choose the time slot archiving method. Instead, select individually the characteristics that are relevant to restricting archiving runs. The time reference characteristic should also be included in this selection whenever possible.
Using this archiving method, for each archiving run, you need to create selection conditions in a variant. In the variant for the archiving run, in addition to the selection conditions, you can also specify for the selected characteristics whether or not non-cumulative changes and marker data is archived. If you choose to archive marker data, be aware that the time selection contains the maximum value for time.
Please refer to the below link to archive the data for Stock Cube:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/c219fe9a46194aa66d55254fdab182/frameset.htm
Hope this helps.
Regards
Tanuj

Activate cube with non-cumulative error

Hello Expert,
There are two cumulative key figures and one non-cumulative key figure in one cube.
To active the cube with the two cumulative key figure, it is OK.
To include the non-cumulative key figure and activate the cube, there are errors.
"/BIC/LCUBE (specify a primary key), When defining table fields, you omitted to specify a primary key."
The non-cumulative key figure uses the other key figure as inflow and outflow.
Do you know what has happened?
Thanks
XY

hi,xy chen
before active the Cube,you should goto menu "Extra" and click on 'Maintain non-cumulative values',here you can choose fields for the Validity table or you do not choose(it's optional,for instance you can find search How to Handle Inventory Management Scenarios in BW.pdf in google).Then you can active the Cube.
holp it helps!
best regards.

Error when import file with non-english character

Hi, I have images file with non-english character (unicode), for example ABC<X>.png where <X> is non-english character such as japanese, chinese, etc. Whenever I want to import the file to After Effects (right click -> import -> file), I always encounter error: Finding file/dir info for the file "C:\...\ABC?.png" -- file not found (-43) (3::30) Can't import file "ABC?.png": unsupported filetype or extension. (0::1) My PC is Windows XP Professional 2002 SP2 English. How to solve this problem? Thanks

Adjust your system language settings. Proper file name conventions require a consistent Unicode environment, so install the respective foreign language support files or switch the language system-wide. Mixing different zones/ code ranges is always a bad idea. If your system is not in Japanese, AE will always misinterpret the characters and refuse to import. If that's not feasible, simply rename the files.
Mylenium

How to archive info cube with non-cumulatives values ??

Dear All,
Would you like kindly help me please .. ??
It's regarding archiving, but right now archiving in Info Cube with cumulative values like Info cube movement.
Because it's rather different than other cube due it has marker ..
I've already read from article discussing about archiving, it said i must archive the data before the marker (it's if i'm not having incorrect understanding). But right now, i don't know where the marker is ??
My questions are:
1. Could somebody help me please giving me explanation regarding it ??
2. If don't mind, would you like to explain me step-by-step how to archive it ??
3. Is my comprehension above correct that we have to archive data before the marker ?? If yes, how can i know where the marker is (What date does the marker point to ?? ) ??
Best regards,,
Niel.

Hi
May be helpful to you
Step by step https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0974515-7225-2b10-14a1-f5abba35b19f
Data Archiving Part 1 A Tour dHorizon
http://www.sap-press.com/product.cfm?account=&product=H956
Technical Setting for Data Archiving
Hope it helps

Error when activating cube

Hi,
a transport got cancelled with the following error message:
Start of the after-import method for object type R3TR CUBE
Error/warning in dict. activator, detailed log > Detail
When I open the "long text", I get the following text:
Error/warning in dict. activator, detailed log --> Detail
Message no. R7159
Diagnosis
The dictionary activation module could not activate all objects.
System response
A statement is produced from the activation module log with warnings and error messages.
Procedure
Using detail (or the path Extras -> Log -> Activate dictionary), you get the complete activation module log with detailed information.
Does someone knows where can I get the detail log (or the path Extras - Log - Activate Dictionary)...
In SE14, the table does not have any inconsistency...
thanks
Antonio

hi,
have you included the neccessary time characteristics
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Ramesh

Problems with Non-cumulative Cube

Dear All,
I have a cube with non-cumulative key figures. An DSO supply data for that cube.
The query on that cube will gets wrong results sometimes. But after removing all the data from that cube and uploading again from the DSO, the query presents the right result.
Is there anybody knows why and how to fix it?
Thanks.
Bolun

Hi
Non-cumulative Cubes to be defined correctly with Inflow and Outflow because it depends on Which option you choose depends on how you want to evaluate the non-cumulative key figure, and also the Marker Update you are dealing with.
The key figures for non-cumulative value change or for inflows and outflows are normal cumulative key figures that have u2018summationu2019 both as aggregation and exception aggregation. Generally, Non-cumulative key figures always have summation as standard aggregation.
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Hope it helps and clear

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error when activating an R/3 generic datasource in BW

Hi
I've created a generic datasource in R/3 4.6C system using a table view over R/3 standard Project System tables with joins. This datasource has been activated. I then replicated this generic datasource in BI7 datawarehousing environment. The replication went ok and I could see the R/3 generic datasource in RSA1. When I tried to activate this datasource I received this error message:
Error when activating DataSource ZPROJECT_ATTR Message no. RSO404
I didnt have similar problem with the other generic datasources.
I'm currently working on Netweaver 2004s BI support pack 10 environment.
Please let me know how to fix this problem.
Many thanks,
Anthony

Hi Anthony,
Do go through the note's detailed text and do listen to this advice from an old man. Do read the section below in the note and do assign some points to this geezer "lying" on his deathbed.
Quote from the note (this one rhymes..yaa):
Source system = R/3 Release 4.0B ff (all subsequent releases including 4.7 and so on)
= BW Datamart 2.0B, 2.1C, 3.0B, 3.10, 3.50, 7.00 ff
= CRM release 2.0, 3.0, 4.0 ff
unquote...
Cheers
Neeraj

Error when activating Cube with Non-cumulative KF

Similar Messages

Maybe you are looking for