Error when activating Datasource in Source System

Dear All,
I am gettting this error when activating data source in source system(RSA5).
1)DataSource 0NETWORK_CUST_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off.
2) The extract structure DTTV_REC_53 of the DataSource 0TV_REC_531 is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.

Hi
To use this datasource, you need to install EHP3 package.
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/7b6c759c494ffcbf821d2442687888/frameset.htm
Chandu.

Similar Messages

  • Error when activating datasource

    Hello,
    I am trying to create a new transaction data datasource assigned to a flat file source system.  When i hit the check i get no errors but when i try to activate the activation fails with errors.  The error Message No. RSO404 says "Error when activating Datasource".  We are on BW 7.0 stack 12.
    Has anyone seen this?  It is hard to troubleshoot it when i get no real errors to go on.  It is a very simple three field datasource with one characteristic, one key fig, and an additional currency characteristic.  The key fig is in external format and references 0CURRENCY.  Does anybody have any insight?
    Thanks,
    TMS

    Hi TMS,
    I am facing exactly the same problem here...
    transactional datasource for flatfile gives me errors DO313, RSO404 and then RSDS106
    We are on:
    SAP_ABA            700               0011  SAPKA70011
    SAP_BASIS     700               0011  SAPKB70011
    PI_BASIS            2005_1_700  0011  SAPKIPYJ7B
    SAP_BW            700               0012  SAPKW70012
    FINBASIS            600               0008  SAPK-60008INFINBASIS
    BI_CONT            703               0005  SAPKIBIIP5
    SEM-BW            600               0008  SAPKGS6008
    Did you manage to find a solution?

  • Error - When Activating Generic Data source in BW DEV

    Hi,
    I am working in BI 7.0
    I created a Generic Data source
    I had checked in RSA3 , it is showing records too.
    i replicated the Datasource in BW
    Datasource is available in BW
    Then I try to activated the Datasource
    because
    when i try to create tranformation for the data source then
    It will show this message (and transformation is not created)
    <b>Source RSDS ZCOPC_C10 GDVCLNT110 does not exist</b>
    My Data source name is ZCOPC_C10 for source system GDVCLNT110
    then I will try to Activated the Data source First
    then also it will show the Error like this
    Post Processing/Checking the Activation for DataSource ZCOPC_C10 GDVCLNT110
    <b>&
    Error when activating DataSource ZCOPC_C10                     GDVCLNT110</b>
    and the
    DataSource ZCOPC_C10 (GDVCLNT110) could not be activated
    can some body help me to solve this problem
    sure you can get the points
    Thanks
    prasanna

    Hi Oscar,
    The Data source is not Active in BW, I had checked in Data source defination.
    when I activate the Data source .
    <b>I received the Message / Error</b>
    Activation of Objects with Type DataSource
    Saving Objects with Type DataSource
    Internal Activation (DataSource )
    Preprocessing / Creation of DDIC Objects for DataSource ZCOPC_C11 GDVCLNT110
    Save DDIC object /BIC/CAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110)
    Save DDIC object /BIC/WCAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110 - T)
    Save DDIC object /BIC/CAZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Appli)
    Save DDIC object /BIC/CCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110)
    Save DDIC object /BIC/WCCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110 - Tab)
    Save DDIC object /BIC/CCZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Chara)
    Save DDIC object /BIC/B0001051 (PSA for ZCOPC_C11 GDVCLNT110 Itemization)
    Writing of object catalog entries (TADIR)
    Object TABL /BIC/CAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
    Object TTYP /BIC/WCAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
    Object TABL /BIC/CAZCOPC_C00002000 written to the ObjectCatalog (TADIR)
    Object TABL /BIC/CCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
    Object TTYP /BIC/WCCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
    Object TABL /BIC/CCZCOPC_C00002000 written to the ObjectCatalog (TADIR)
    Activate all Dictionary objects ( 6 ):
    All DDIC objects have been activated / deleted
    <b>Post Processing/Checking the Activation for DataSource ZCOPC_C11 GDVCLNT110
    Error when activating DataSource ZCOPC_C11                     GDVCLNT110</b>Deletion of Unused Dictionary Objects ( 6)
    All DDIC objects have been activated / deleted
    Deletion of Object Catalog Entries (TADIR)
    Object TABL /BIC/CAZCOPC_C000020000001 deleted from TADIR
    Object TTYP /BIC/WCAZCOPC_C000020000001 deleted from TADIR
    Object TABL /BIC/CAZCOPC_C00002000 deleted from TADIR
    Object TABL /BIC/CCZCOPC_C000020000001 deleted from TADIR
    Object TTYP /BIC/WCCZCOPC_C000020000001 deleted from TADIR
    Object TABL /BIC/CCZCOPC_C00002000 deleted from TADIR
    All unused DDIC objects have been deleted
    Thanks
    prasanna

  • Error When Activating DataSource in BI

    Hi,
    I have created a Generice Data Source in source system and replicated the same in BI. I am getting error 'Error when activating Datasource '.
    Kindly give me some suggestion how to rectify it.
    Regards,
    Sangeetha.A

    Hi,
    First check whether u have activated the data source in the transaction RSA6. Also, check whether the data source which you activated is listed in transaction RSA5.
    Regards,
    Krishna.

  • Error Loading Hierarchy Error when updating Idocs in Source System

    Hello  Friends,
         I am loading  hierarchy data  using Info pac into  0FUNDS_CTR . I have selected  a hierarchy under hierarchy selections tab  in the Info pac .
    All Partner profiles in WE20 seems OK .   But When I loaded data , throwing errrr message  as below
    Error when updating Idocs in Source System
    Diagnosis
    Errors have been reported in Source System during IDoc update:
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Source System . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    When I checked in TC WE05 says that  IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
    Please advice .
    Many thanks

    Hi  Krishna4bi,
    Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem  if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
    Hope it helps,
    By,
    Praveen Yagnamurthy,
    SAP BI Consultant,
    Blue Marlin Systems-INDIA.
    http://bluemarlinsys.com/bi.

  • Error when updating Idocs in Source System - Urgent

    Hi Team,
    When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
    When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
    <b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
    Can any one please help me to solve this error.
    This is am Urgent requirement for me to deliver.
    Thanks & Best Regards,
    Venkata.

    Hello VenkaTa,
    How r u ?
    The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
    Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Error when updating Idocs in Source System

    Hi All,
    We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Source System . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    Error when updating Idocs in Source System     
    Could anyone please let me know what can be done ?
    Thanks
    con

    Hello All,
    I have same problem but its RESOLVED by the following process.
    Step - 1
    execute  the Function module "SCP_LANGUAGES_IN_INSTANCE".  It may or maynot give some output. Just note if it give the output
    Step - 2
    in Transaction SE38 execute the program "RSCPINST".
    Just Click on the Activate button (dont select anything).
    Step - 3
    Again do the same thing specified in Step - 1.  Now it will give the output saying that Language is DE.
    So by the above procedure my issue is been resolved.
    Regards
    Sankar

  • ERROR - no available datasource for source system exist

    I tried to load the master for 0Bill_Type
    1) Install infoobject business content and Create infoobject
    2) Activate datasource in R/3
    3) Replicate datasource
    4) Assign infosource ---> the error said no available datasource for source system exist
    When I go to source system--> Object overview --> I don't see anything at all?
    Please advise what went wrong ?

    Hi Pandadda,
    I think you have not transferred the APPLICATION COMPONENT HIERARCHY yet. If not, then do the following:
    1. In your R/3 system execute TCODE = SBIW.
    2. Go to BUSINESS CONTENT DATASOURCES
    3. Execute TRANSFER APPLICATION COMPONENT HIERARCHY by clicking the CLOCK.
    Replicate you datasource then check it on your BW system
    R,
    Adwin

  • Error when activate a SAP source system

    Hello Experts,
    I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
    In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
    I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
    Thank you vey much in advance,
    Niurka

    Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
    I hope that you can give some tips or solution for this issue,
    Thanks!

  • Error when we create the source system file

    i am creating the source system file of ECC to BI. how to slove this problam. when i am trying activating this error is getting.
    The following errors occurred in the source system:     RSAR     374     
    Result of the destination check: Timeout     RSAR     375

    Mr. Reddy,
    Check out this links.
    Error while source system creation/Source system transport
    Hope it helps you.
    SRS

  • Error when trying to compound source system

    I am receiving the error message R7 405 "Inconsistent Compound with char x and Ref char x" when I try to compound 0SOURSYSTEM to some of my infoobjects. 
    Has anyone seen this issue and been able to resolve it?
    A simple scenario would be to try to compound source system with 0Division.  Division has a reference char of 0DIV_HEAD.   Both are collected in RSD1 via the free selection of infoobjects.   0Division is changed and both objects are selected and activated.  The resulting error R7 405 is then displayed by the system.    We are receiving this for multiple objects.   I was able to convert Material with all its dependencies.

    I get it.
    This is what I did. I added source system as compounding IO to reference object, say ZDIVISION in IO editor. I saved it (it was giving me activation error). I then opened the referencing char, say ZDIV_HEAD in IO editor and added source system compounding. It was again giving me activation error, so I just saved it.
    I went to RSD1, collected these two IOs and activated. I got an error because the reference IO was in a comm structure which had no source system. I deleted that infosource, and activated both the IOs again in RSD1. It activated just fine. Both IOs are active now.
    By the way, the IO editor does allow you to add compounding for a referencing IO (it gives activation error though).
    Not sure if this helps.

  • Error when creating R/3 source system in BW3.5

    I HAVE CREATED SOURCE SYTEM FOR R/3 TO PERFORM EXTRACTION IN BW-3.5.
    AFTER I DID ALL THE BASIC SETTING LIKE CREATING LOGICAL SYSTEM AND ASSIGNING CLIENT AND CREATING RFC DISTINATIONS.
    I TRY TO CREATE SOURCE SYSTEM BY RIGHT CLICKING ON SOURCE SYSTEM ROOT NODE AND SELECTED THE OPTION SAP SYSTEM FROM RELEASE 3.0D(MANUAL CREATION) AND ENTERED
    RFC DISTINATION : (LOGICAL SYSTEM ID OF R/3)
    LOGICAL SYSTEM NAME: (LOGICAL SYSTEM ID OF R/3)
    SOURCE SYSTEM NAME: (R/3 SOURCE SYSTEM)
    ERROR MESSAGE -- NO:447
    BASIC TYPE ZSBA005 DOES NOT EXITS
    ACTIVATION OF SOURCE SYSTEM FAILED
    PLEASE HELP ME IN THIS ISSUE..
    CHEERS
    AMAR.

    Hi,
    Kindly do not type completely in CAPS.
    Take a look at SAP Note 140276 to correct errors in source system assignment.
    BR/
    Mathew.

  • Error when activating DataSource  -  Message no. RSO404

    Hi there,
    does somebody know what could be the problem at this point?
    I was trying to activate a real time data acquisition data source.
    Thanks.
    Regards
    FedeX

    when I try to perform a manage on the DataSource I get the following message:
    <b><i>Invalid DataStore object name /BIC/B0001633: Reason: No valid entry in table RSTS
    Message no. RSM1294</i></b>
    Does it say somthing to you?
    Regards
    FedeX

  • Error when activating rda data source

    hi,
    i am trying to activate my data source it is saying
    'web service object already exists'.
    how to activate it
    it is not used anywhere

    Hi Venkat,
    Web Service data source works after the SP10....
    Pls check..
    Thanks
    Gopal

  • Error when activating an R/3 generic datasource in BW

    Hi
    I've created a generic datasource in R/3 4.6C system using a table view over R/3 standard Project System tables with joins.  This datasource has been activated. I then replicated this generic datasource in BI7 datawarehousing environment.  The replication went ok and I could see the R/3 generic datasource in RSA1.  When I tried to activate this datasource I received this error message:
    Error when activating DataSource ZPROJECT_ATTR Message no. RSO404
    I didnt have similar problem with the other generic datasources.
    I'm currently working on Netweaver 2004s BI support pack 10 environment.
    Please let me know how to fix this problem.
    Many thanks,
    Anthony

    Hi Anthony,
    Do go through the note's detailed text and do listen to this advice from an old man.  Do read the section below in the note and do assign some points to this geezer "lying" on his deathbed.
    Quote from the note (this one rhymes..yaa):
    Source system = R/3 Release 4.0B ff (all subsequent releases including 4.7 and so on)
                = BW Datamart 2.0B, 2.1C, 3.0B, 3.10, 3.50, 7.00 ff
                = CRM release 2.0, 3.0, 4.0 ff
    unquote...
    Cheers
    Neeraj

Maybe you are looking for