Error when activating datasource
Hello,
I am trying to create a new transaction data datasource assigned to a flat file source system. When i hit the check i get no errors but when i try to activate the activation fails with errors. The error Message No. RSO404 says "Error when activating Datasource". We are on BW 7.0 stack 12.
Has anyone seen this? It is hard to troubleshoot it when i get no real errors to go on. It is a very simple three field datasource with one characteristic, one key fig, and an additional currency characteristic. The key fig is in external format and references 0CURRENCY. Does anybody have any insight?
Thanks,
TMS
Hi TMS,
I am facing exactly the same problem here...
transactional datasource for flatfile gives me errors DO313, RSO404 and then RSDS106
We are on:
SAP_ABA 700 0011 SAPKA70011
SAP_BASIS 700 0011 SAPKB70011
PI_BASIS 2005_1_700 0011 SAPKIPYJ7B
SAP_BW 700 0012 SAPKW70012
FINBASIS 600 0008 SAPK-60008INFINBASIS
BI_CONT 703 0005 SAPKIBIIP5
SEM-BW 600 0008 SAPKGS6008
Did you manage to find a solution?
Similar Messages
-
Error When Activating DataSource in BI
Hi,
I have created a Generice Data Source in source system and replicated the same in BI. I am getting error 'Error when activating Datasource '.
Kindly give me some suggestion how to rectify it.
Regards,
Sangeetha.AHi,
First check whether u have activated the data source in the transaction RSA6. Also, check whether the data source which you activated is listed in transaction RSA5.
Regards,
Krishna. -
Error when activating Datasource in Source System
Dear All,
I am gettting this error when activating data source in source system(RSA5).
1)DataSource 0NETWORK_CUST_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off.
2) The extract structure DTTV_REC_53 of the DataSource 0TV_REC_531 is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.Hi
To use this datasource, you need to install EHP3 package.
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/7b6c759c494ffcbf821d2442687888/frameset.htm
Chandu. -
Error when activating DataSource - Message no. RSO404
Hi there,
does somebody know what could be the problem at this point?
I was trying to activate a real time data acquisition data source.
Thanks.
Regards
FedeXwhen I try to perform a manage on the DataSource I get the following message:
<b><i>Invalid DataStore object name /BIC/B0001633: Reason: No valid entry in table RSTS
Message no. RSM1294</i></b>
Does it say somthing to you?
Regards
FedeX -
Error when activating an R/3 generic datasource in BW
Hi
I've created a generic datasource in R/3 4.6C system using a table view over R/3 standard Project System tables with joins. This datasource has been activated. I then replicated this generic datasource in BI7 datawarehousing environment. The replication went ok and I could see the R/3 generic datasource in RSA1. When I tried to activate this datasource I received this error message:
Error when activating DataSource ZPROJECT_ATTR Message no. RSO404
I didnt have similar problem with the other generic datasources.
I'm currently working on Netweaver 2004s BI support pack 10 environment.
Please let me know how to fix this problem.
Many thanks,
AnthonyHi Anthony,
Do go through the note's detailed text and do listen to this advice from an old man. Do read the section below in the note and do assign some points to this geezer "lying" on his deathbed.
Quote from the note (this one rhymes..yaa):
Source system = R/3 Release 4.0B ff (all subsequent releases including 4.7 and so on)
= BW Datamart 2.0B, 2.1C, 3.0B, 3.10, 3.50, 7.00 ff
= CRM release 2.0, 3.0, 4.0 ff
unquote...
Cheers
Neeraj -
Error - When Activating Generic Data source in BW DEV
Hi,
I am working in BI 7.0
I created a Generic Data source
I had checked in RSA3 , it is showing records too.
i replicated the Datasource in BW
Datasource is available in BW
Then I try to activated the Datasource
because
when i try to create tranformation for the data source then
It will show this message (and transformation is not created)
<b>Source RSDS ZCOPC_C10 GDVCLNT110 does not exist</b>
My Data source name is ZCOPC_C10 for source system GDVCLNT110
then I will try to Activated the Data source First
then also it will show the Error like this
Post Processing/Checking the Activation for DataSource ZCOPC_C10 GDVCLNT110
<b>&
Error when activating DataSource ZCOPC_C10 GDVCLNT110</b>
and the
DataSource ZCOPC_C10 (GDVCLNT110) could not be activated
can some body help me to solve this problem
sure you can get the points
Thanks
prasannaHi Oscar,
The Data source is not Active in BW, I had checked in Data source defination.
when I activate the Data source .
<b>I received the Message / Error</b>
Activation of Objects with Type DataSource
Saving Objects with Type DataSource
Internal Activation (DataSource )
Preprocessing / Creation of DDIC Objects for DataSource ZCOPC_C11 GDVCLNT110
Save DDIC object /BIC/CAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110 - T)
Save DDIC object /BIC/CAZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Appli)
Save DDIC object /BIC/CCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110 - Tab)
Save DDIC object /BIC/CCZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Chara)
Save DDIC object /BIC/B0001051 (PSA for ZCOPC_C11 GDVCLNT110 Itemization)
Writing of object catalog entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CAZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Activate all Dictionary objects ( 6 ):
All DDIC objects have been activated / deleted
<b>Post Processing/Checking the Activation for DataSource ZCOPC_C11 GDVCLNT110
Error when activating DataSource ZCOPC_C11 GDVCLNT110</b>Deletion of Unused Dictionary Objects ( 6)
All DDIC objects have been activated / deleted
Deletion of Object Catalog Entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCAZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CAZCOPC_C00002000 deleted from TADIR
Object TABL /BIC/CCZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCCZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CCZCOPC_C00002000 deleted from TADIR
All unused DDIC objects have been deleted
Thanks
prasanna -
0FIA_DS11:Error when activating DataStore Object
Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMSHi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S -
Error when activating Real Time Data Source
Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am -
hi guys
I am trying load one ods to another ods . and when I create DTP and try to activate it throwing some weird message like
Creation of PSA /BIC/B0003852 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4B6GPTZCLXHMKF405417M6KEX
Error when activating Data Transfer Process DTP_4B6GPTZCLXHMKF405417M6KEX
I donu2019t know what is this Causing error ..my source dso is correct has data ..but unable activate this ..
Any clue ?Hi,
I think you have to create export datasource for the first DSO and then check creating the DTP.
Hope this helps..........
Rgs,
Ravikanth. -
Hello,
i am trying to activate freshly installed ODS from business content.
it gives following errors:
RFC connection to source system BWDCLNT210 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Please suggest...
regards,hi Aby,
try if right click source system BWDCLNT210 'restore'
check threads
RFC connection to source system Damaged
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
help. -
Error when activating update rule
HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram. -
"Error when activating update rule" after changing ODS key
Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
and ODS/CUBEs correct, this means that also these objects need
to be of the same version in the source system of the transport as in
target system.
2- Please ensure all infoobjects in the cube are active.Please
reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
with the grouping option "only necessary objects" and then transport
those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete -
Error when activating update rule after transporting to QA
Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
VijayHi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini -
Error when activating DataStore Object
Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des. -
Error when activating the master data
Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
AnnieHi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie
Maybe you are looking for
-
Will boot from cold start sometimes but eventually will not boot at all. Just white screen. Have tried safe boot and cleaning out folders suggested by Apple care advisor. This helps temporarily. But white screen issue returns. Have removed all perife
-
I'm not able to remove a Skype contact permanently
Hi all, when I delete a contact in Skype (by right clicking on the contact and select Remove Contact) it apparently deletes, but then when I disconnect and reconnect on Skype it reappears as again as NOT REMOVED. How can I make sure this contact will
-
How get the string back?
Hello with this code I put my string in a byte array. String code = "This is a testString"; bytes[] ver = code.getBytes(); Can someone tell me how I can get the original string back?
-
I have a book which has been published through a private publisher in the US (Booksurge). It has been translated into German and is now to be published through a similar online publishing house in Germany. My colleague is worried that US-built pdf
-
DW cs4 preview in browser - requesting localhost instead of 127.0.0.1
I use Dreamweaver CS4 on the same machine as Coldfusion Server When I'm testing pages locally, I click preview in browser and Dreamweaver send the request, prefixed with localhost/page.cfm This is fine and works, BUT I want to display debug output fr