Error when activating DTP for InfoCube

Hi
I encountered an error '**** Error from PSA ****' 'Error when activating Data Transfer Process DTP_436DF8XYKE2Y97CUX9W7FM0JH' while trying to activate the DTP for an infocube. Does anyone know why this happens and how to fix it ?
I'm on support pack 9 at this moment.
Many thanks,
Anthony

Hi Gnana
Thanks for your reply. Yes, I had already created the transformation for the bespoke cube, checked, saved and activated it without any error. Next, I created the DTP for this cube. Checked it and there wasn't any error. However when I activated it, I received that error message. I didn't get this error when I activated DTP for DSO and master data infoobject.
I have deleted and created the DTP like 5-6 times and still faced the same error message.
Prior to applying support pack 9, I didn't get this error message. Now that I did and also applied the collective OSS note 978148 (BI in SAP NetWeaver 2004s: OSS notes after SPS9), I received this error message.
Regards,
Anthony

Similar Messages

Error when activating DTP

Hello,
I hv a ZCube which contains some data..now due to some requirement I changed the Transformation activated it & transported Transformation & cube from Development to Production server..
I tried activatingf DTP on production itself but it is giving following errors:
-> &
-> Error when activating Data Transfer Process DTP_4CGR11XLGUTZDF62I40GFEJE3
plz tell how to activate??
Thanks
-Shilpi

Hi Shilpi,
there are several correction notes regarding DTP on this SP level, please try note 1151263.
Please also look into the transport log, expand it, and to see if there should be any other information.
please also try RSDG_AFTER_IMPORT_FOR_CORR according to 411574 to try re-import.
There might be some inconsistency for PSA table, please run RSAR_PSA_CLEANUP_DIRECTORY to check.
Thanks & B.R.
Vince

Error when activating DTP in

hi guys
I am trying load one ods to another ods . and when I create DTP and try to activate it throwing some weird message like
Creation of PSA /BIC/B0003852 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4B6GPTZCLXHMKF405417M6KEX
Error when activating Data Transfer Process DTP_4B6GPTZCLXHMKF405417M6KEX
I donu2019t know what is this Causing error ..my source dso is correct has data ..but unable activate this ..
Any clue ?

Hi,
I think you have to create export datasource for the first DSO and then check creating the DTP.
Hope this helps..........
Rgs,
Ravikanth.

'File is not open' error when running DTP for flat file upload in BI

Dear Sir,
We are trying to upload master data from flat file for which we have
created respective DTPs. When we are running the DTPs we are getting an
error saying 'The file '&&filepath&&' is not open'. We also checked
that the file is not open, but still we are getting this error. Could
anyone please suggest what we have to do to solve this problem.
Many Thanks
Narendra

Hi,
I am currently facing the same error "Error in Source system". "The file 'path' is not open".
Could you please let me know how you resolved this issue.
many thanks.
Regards,
Madhusudhan

Error when running report: "Error in aggregate table for InfoCube"

Hi Experts
We had a temporary error, which I would like to find the root cause for.
We where running a Workbook which is based on a multiprovider. For a short period of time (around 10 minuts) we got the following error when we executed the workbook based on this multiprovider:
"Error in aggregate table for InfoCube"
There where no loads or aggregates rolling up on the cubes in the multiprovider.
I see no short dumps as well in ST22.
Have anybody seen this error before, and how can I trace how this error occured?
Thanks in advance.
Kind regards,
Torben

Hi Sneha,
I will Suggest u to do some RSRV tests.
Go to transaction RSRV. There you will find test for aggregates. Just Perform them and see whether you get any discrepencies.
Regds,
Shashank
Edited by: Shashank Dighe on Jan 4, 2008 10:51 AM

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Runtime Error when activating Comp Records

When trying to activate IT 0759 records in Comp to update Basic Pay, some employees received a Runtime Error. It states, "The exception CX_HRPA_VIOLATED_POSTCONDITION was raised, but it was not caught anywhere along the call hierarchy."
It says it was not caught in 'HR_ECM_INSERT_INFOTYPE' function.
Has anyone else seen this problem? It didn't happen for all employees.
Thanks!

Hi guys,
Another reason for locked SPO's is:
The terrible attribute-change-run (ACR). When you try to activate a locked SPO, you only get a message like this:
Runtime Lock: Activity ACTIVATE_SPO, Object DATATARGET ZZZ
Unable to lock the semantically partitioned object
Error when activating Semantically Partitioned Object ZZZ
NO DTP request is running, so you can take all the day trying to find the error.
So in my case, there was an incomplete ACR (cancelled with error - red).
It's like a curse. It is not easy to find the relation between ACR an SPO activation process (SAP error message is not useful to identify the reason)
Finally, keep in mind:
Check any DTP request running or cancelled that affect your SPO model and
Check if you have an ACR (running or cancelled). This can lock your SPO object
regards!

Error when adding Non-Cumulative InfoCube to a Multi-Providers

I want to include an InfoCube using non-cumulative key figures (0IC_C03) to a MultiProvider that includes other basic cubes. Is this possible? I thought I read that you could include one non-cumulative cube in a MultiProvider. When I added 0IC_C03 to the MultiProvider I get the following error when activating: "Define the characteristics of the validity table for non-cumulatives." The validity table is defined for 0IC_C03, do I need to do anything special in the multiprovider? Any ideas on what I need to do?
Thanks,
Chris
Edited by: Chris Robertson on Nov 18, 2008 4:52 PM

Hi Chris,
I am having the same issue. Did you manage to fix this?
Thanks,
Milind

Error while activating DTP in BI 7.0

I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.

Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Error when activating DTP for InfoCube

Similar Messages

Maybe you are looking for