Error when activating infoobject 0MAT_PLANT

Dear experts,
I switched off the flag for time dependency of a navigational attribute of 0MAT_PLANT. When trying to active 0MAT_PLANT again I am receiving the error R7286 (Error in activating the InfoObjects). When running RSRV I am only getting red traffic lights but when trying to repair the system is only telling me to activate the infoobject first. The infoobject was locked for conversion, I removed the lock and flagged the time dependency again, hoping that the object could be reactivated again but unfortunately this is not the case. Can someone help me with some tips on how to approach this?
Many thanks in advance. Best regards, Jeroen

Thanks Dinesh. Not sure if it is our 30B version but I don't get very useful information when checking the long text. I also checked the complete log but it is only mentioning to analyze /BI0/QMAT_UNIT with SE11. When doing this I get an error: /BI0/QMAT_PLANT: Inconsistency DD <-> DB (check table with analysis tool)
Any other tips?

Similar Messages

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating DTP for InfoCube

Hi
I encountered an error '**** Error from PSA ****' 'Error when activating Data Transfer Process DTP_436DF8XYKE2Y97CUX9W7FM0JH' while trying to activate the DTP for an infocube. Does anyone know why this happens and how to fix it ?
I'm on support pack 9 at this moment.
Many thanks,
Anthony

Hi Gnana
Thanks for your reply. Yes, I had already created the transformation for the bespoke cube, checked, saved and activated it without any error. Next, I created the DTP for this cube. Checked it and there wasn't any error. However when I activated it, I received that error message. I didn't get this error when I activated DTP for DSO and master data infoobject.
I have deleted and created the DTP like 5-6 times and still faced the same error message.
Prior to applying support pack 9, I didn't get this error message. Now that I did and also applied the collective OSS note 978148 (BI in SAP NetWeaver 2004s: OSS notes after SPS9), I received this error message.
Regards,
Anthony

Error when activating 0pm_dso1

Hi,
I am getting an error when activating standard DSO 0PM_DSO1
error is as below
InfoObject 0SOURSYSTEM has to be contained in DS (required by InfoObject 0NOTIFICATN)
InfoObject 0SOURSYSTEM has to be contained in DS (required by InfoObject 0EQUIPMENT)
InfoObject 0SOURSYSTEM has to be contained in DS (required by InfoObject 0FUNCT_LOC)
Inconsistencies found while checking DataStore object 0PM_DS01
Please suggest ,
Thanks in Advance ,
Harshitha

Hi,
Thanks a lot All,
As you all mentioned i tried activating these 4 IO
but i am facing an error
like below
InfoObject 0EQUIPMENT is referenced from ZCRELOBE2, compounding cannot be changed
Characteristic 0EQUIPMENT: Navigation attribute ZCSERNR is used in ref. to char. ZCRELOBE2
InfoObject 0EQUIPMENT being used in InfoCube ZC0PM_C03 (contains data)
InfoObject 0EQUIPMENT being used in InfoCube ZCNOTITEM (contains data)
InfoObject 0EQUIPMENT being used in InfoCube ZCNOTITEM (contains data)
InfoObject 0EQUIPMENT being used in InfoCube ZCNOTITEM (contains data)
Please let me know how to resolve this type of issues
Thanks in Advance,
Harshitha

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error when activating an R/3 generic datasource in BW

Hi
I've created a generic datasource in R/3 4.6C system using a table view over R/3 standard Project System tables with joins. This datasource has been activated. I then replicated this generic datasource in BI7 datawarehousing environment. The replication went ok and I could see the R/3 generic datasource in RSA1. When I tried to activate this datasource I received this error message:
Error when activating DataSource ZPROJECT_ATTR Message no. RSO404
I didnt have similar problem with the other generic datasources.
I'm currently working on Netweaver 2004s BI support pack 10 environment.
Please let me know how to fix this problem.
Many thanks,
Anthony

Hi Anthony,
Do go through the note's detailed text and do listen to this advice from an old man. Do read the section below in the note and do assign some points to this geezer "lying" on his deathbed.
Quote from the note (this one rhymes..yaa):
Source system = R/3 Release 4.0B ff (all subsequent releases including 4.7 and so on)
= BW Datamart 2.0B, 2.1C, 3.0B, 3.10, 3.50, 7.00 ff
= CRM release 2.0, 3.0, 4.0 ff
unquote...
Cheers
Neeraj

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Error when activating Datasource in Source System

Dear All,
I am gettting this error when activating data source in source system(RSA5).
1)DataSource 0NETWORK_CUST_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off.
2) The extract structure DTTV_REC_53 of the DataSource 0TV_REC_531 is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.

Hi
To use this datasource, you need to install EHP3 package.
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/7b6c759c494ffcbf821d2442687888/frameset.htm
Chandu.

Runtime Error when activating Comp Records

When trying to activate IT 0759 records in Comp to update Basic Pay, some employees received a Runtime Error. It states, "The exception CX_HRPA_VIOLATED_POSTCONDITION was raised, but it was not caught anywhere along the call hierarchy."
It says it was not caught in 'HR_ECM_INSERT_INFOTYPE' function.
Has anyone else seen this problem? It didn't happen for all employees.
Thanks!

Hi guys,
Another reason for locked SPO's is:
The terrible attribute-change-run (ACR). When you try to activate a locked SPO, you only get a message like this:
Runtime Lock: Activity ACTIVATE_SPO, Object DATATARGET ZZZ
Unable to lock the semantically partitioned object
Error when activating Semantically Partitioned Object ZZZ
NO DTP request is running, so you can take all the day trying to find the error.
So in my case, there was an incomplete ACR (cancelled with error - red).
It's like a curse. It is not easy to find the relation between ACR an SPO activation process (SAP error message is not useful to identify the reason)
Finally, keep in mind:
Check any DTP request running or cancelled that affect your SPO model and
Check if you have an ACR (running or cancelled). This can lock your SPO object
regards!

Folder name already exists error when activating feature

HI,
I am creating a document library and adding folders to it using elements.xml in VS 2012.
First time deployment of the item works fine, the folder is created. But further deployment or activation of feature from site features is throwing the error "Folder name already exists".
Below is the elements.xml of List Instance, which was modified to add the folders.
<ListInstance Title="TestLibrary" OnQuickLaunch="FALSE" TemplateType="101" FeatureId="Guid" Url="Lists/TestLibrary" Description="TEST Library List Instance">
<Data>
<Rows>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_One</Field>
<Field Name="Title">Test_One</Field>
<Field Name="FSObjType">1</Field>
</Row>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_Two</Field>
<Field Name="Title">Test_Two</Field>
<Field Name="FSObjType">1</Field>
</Row>
</Rows>
</Data>
</ListInstance>
How to fix this?
Thanks

Hi,
According to your post, my understanding is that you got “Folder name already exists error when activating feature”.
I had used the following code snippet to create a folder within a document library, it didn’t throw errors when reactive the feature.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="LibTest"
OnQuickLaunch="TRUE"
TemplateType="10000"
Url="Lists/LibTest"
Description="My Lib Instance">
</ListInstance>
<Module Url="Lists/LibTest/Folder1" />
</Elements>
http://shareden.blogspot.com/2012/11/creating-feature-with-image-library.html
Also, when you redeploy the project, it will give you a dialog which would promote to delete the existed list or not.
If you click the “Resove Automatically”, the visual studio would delete the existed list automatically, and create a new list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Short dump OBJECTS_OBJREF_NOT_ASSIGNED when activating infoobjects

Hi Experts,
We are getting a short dump when activating bussiness content infoobject which contain attributes, for e.g. 0COSTCENTER.
We are not getting the same dump when activating infoobjects whith out attributes.
We found a note 1019055 that recomends install sp13 or install six or seven notes for an emergency issue.
The problem is that if we install sp13 we will get out of stack.
What is your recomendation in this case? we are afraid that the problems will continue until we don't implement the sp13.
Thanks!

use t-code SNOTE to implement the OSS note you mentioned ,if it doesnt work you can always revert back to old status by doing Reset.
Hope it Helps
Chetan
@CP..

Error when activating infoobject 0MAT_PLANT

Similar Messages

Maybe you are looking for