Error when activating rda data source

hi,
i am trying to activate my data source it is saying
'web service object already exists'.
how to activate it
it is not used anywhere

Hi Venkat,
Web Service data source works after the SP10....
Pls check..
Thanks
Gopal

Similar Messages

Error - When Activating Generic Data source in BW DEV

Hi,
I am working in BI 7.0
I created a Generic Data source
I had checked in RSA3 , it is showing records too.
i replicated the Datasource in BW
Datasource is available in BW
Then I try to activated the Datasource
because
when i try to create tranformation for the data source then
It will show this message (and transformation is not created)
Source RSDS ZCOPC_C10 GDVCLNT110 does not exist
My Data source name is ZCOPC_C10 for source system GDVCLNT110
then I will try to Activated the Data source First
then also it will show the Error like this
Post Processing/Checking the Activation for DataSource ZCOPC_C10 GDVCLNT110
&
Error when activating DataSource ZCOPC_C10 GDVCLNT110
and the
DataSource ZCOPC_C10 (GDVCLNT110) could not be activated
can some body help me to solve this problem
sure you can get the points
Thanks
prasanna

Hi Oscar,
The Data source is not Active in BW, I had checked in Data source defination.
when I activate the Data source .
I received the Message / Error
Activation of Objects with Type DataSource
Saving Objects with Type DataSource
Internal Activation (DataSource )
Preprocessing / Creation of DDIC Objects for DataSource ZCOPC_C11 GDVCLNT110
Save DDIC object /BIC/CAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110 - T)
Save DDIC object /BIC/CAZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Appli)
Save DDIC object /BIC/CCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110 - Tab)
Save DDIC object /BIC/CCZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Chara)
Save DDIC object /BIC/B0001051 (PSA for ZCOPC_C11 GDVCLNT110 Itemization)
Writing of object catalog entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CAZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Activate all Dictionary objects ( 6 ):
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataSource ZCOPC_C11 GDVCLNT110
Error when activating DataSource ZCOPC_C11 GDVCLNT110Deletion of Unused Dictionary Objects ( 6)
All DDIC objects have been activated / deleted
Deletion of Object Catalog Entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCAZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CAZCOPC_C00002000 deleted from TADIR
Object TABL /BIC/CCZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCCZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CCZCOPC_C00002000 deleted from TADIR
All unused DDIC objects have been deleted
Thanks
prasanna

ERROR WHEN GENERATING EXPORT DATA SOURCE

Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.

Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error when activating Datasource in Source System

Dear All,
I am gettting this error when activating data source in source system(RSA5).
1)DataSource 0NETWORK_CUST_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off.
2) The extract structure DTTV_REC_53 of the DataSource 0TV_REC_531 is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.

Hi
To use this datasource, you need to install EHP3 package.
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/7b6c759c494ffcbf821d2442687888/frameset.htm
Chandu.

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while activating Transactional data source

I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.

Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth.

Error when Activating the data store object

Hi All,
I have to get the following below errors when i was activating the ods.
Transfer structure prefix for source systemt T90CLNT is not defined
Error when creating the export datasource and dependent objects
could anyone help me on this issue.
Regards,
Naveen.
Edited by: naveen naveen on Feb 2, 2009 6:35 AM

Hi Naveen,
Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
and also Check the BW self System whether it is active or not. then try activating DSO
hope this helps
Regards,
Daya Sagar
Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

Error when activating Order Data Type ORDR

Hi all
We were activating all the ODM components acc to note 1178483 and got the following error when trying to activate Order Data Type ORDR:
Parameter CONFSTAT in access path TSTP of order data type ORDR unknown (/SCMB/ODM_ORDTYPE043)
Do any of you know what is triggering this error?
In order to carry on we removed the CONFSTAT entry and were then able to activate ORDR afterwards. However, we would like to know what the consequences are (if any) of this action.
Thank you in advance.
Best regards,
Dan Bruun

Hello Dan,
First of all you should not remove any SAP standard entry (without advice of any experts.) so now you won't get any support from SAP for this issue.
ODM activation require for creation of tables(which stores transactional data) in each client.
CONFSTAT is a field in /1OM/ORDROEHD<Your_client_number> table which stores data about PO/RO confirmation status.
You got this error because of ODM component OEHD was not activated properly.(Even it shows warning/error while component activation but it is not activated properly).
As you have removed CONFSTAT entry system won't behave normally for PO/RO creation/change/confirmation.
What you can do now restore your back-up before deletion of this entry try to do ODM activation again if you still get error then try to do force ODM activation(transaction code:/N/SCMB/ODM_GEN_ORC also checked Force Genration check box).
Even after force generation of ODM gives you error raised an OSS with SAP support for resolution.
Regards,
Nikhil

Error when activating DSO data

On activation, I see the following error in ST22:
Invalid column name 'TCTIVAL60'
Any idea? Thanks in advance!

Well, I don't think the problem has anything to do with the content. It just looks as if the corresponding database object is inconsistent.
I already found an article for this problem:
BW SID Table /BI0/STCTIVAL60 is inconsistent after upgrade of update | Program error Notes | SAP Techies
I will try this first and come back with the results...

Problem in activating the data source using a web service

Hi all,
I have created a web service with Logical and Source System names and i have selected nothing in the Type and Release.
Activated the created web service.
Later i tried creating a data source based on this web service source system and tried activating the data sources.
But it is throwing an error saying that error generating the Web Service /BIC/CQWEB_SER_000020000 and error while activating the data source.
Can any one say why is this happening and is there any pre requisites to be done while creating the web service?
what is the use of Type and Release while creating the webservice?
Thanks,
Pra.

Hi
Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
thanks,
Teja

Error occurred querying a data source in office 365.

I have created a simple infopath form and in one of my dropdown box i am receiving the REST services.
when i run the infopath form 2013 in preview it was running good but when i upload it on to office 365 cloud it's showing me error. i had converted the services into UDL and save it on Data connection Library and it's approved.
Warning
Click OK to resume filling out the form. You may want to check your form data for errors.
The entry has been added to the Windows event log of the server.
log ID:5566
Correlation ID:feb08a9c-9d47-30f5-5d89-60340242d6d1.

Hi,
According to your post, my understanding is that you got error when querying a data source in office 365.
Per my knowleadge, we cannot connect to SharePoint Web Services from InfoPath Forms within SharePoint Online.
Loopback protection is enabled on the SharePoint Online environment and will block calls to SOAP and REST from InfoPath Form Services.
For more information, you can refer to:
Error message when you connect an InfoPath form to a SharePoint Online web service: "An error occurred while connecting to a Web Service"
As a workaround, to look up data for some dropdowns from several external REST Web Services, we need to have a Data Connection library in your Site Collection in which to store the UDCX files.
The steps seem to be:
Create a Data Connection Library in your Site Collection
In the InfoPath ribbon, go to Data, then Data Connections. Your existing data connections should be listed.
Choose the data connection which is hosted on a different domain.
Clink the
Convert to Connection File… button
In the location selector, specify the path to the Data Connection Library you created above.
Leave the
Relative to site collection (recommended) radio button selected.
Click OK
Here is a great blog for your reference:
InfoPath 2013 Forms on Office365 with External REST DataSources
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Error when generating master data routines when activating infoobject

Hello Gurus,
I had an issue with one of my info object.
I Created the one Custom InfoObject with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject again the test system it gives me an error
Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
Can you please suggest me what are the options.
i cannot delete the object as it is used in many cubes which is having data.
Appreciate your quick response.
Thanks,
Bhaskara Rao.

If your Prod is working fine, it should work in test too.
Did it ever worked in test after transport?
Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
Edited by: ashok saha on Mar 6, 2008 8:05 PM

Error when activating rda data source

Similar Messages

Maybe you are looking for