Error when activating the BEx history

Hi,
When I am trying to activate the BEx history through transaction 'RS_PERS_ACTIVATE', I am getting the error saying  'Activation of BEx History failed'. Then when I checked the DSO '0PERS_BOD' it is inactive also the corresponding table '/BI0/APERS_BOD00' not exists in data dictionary table. Because of this I am getting Error message while opening the BEx analyzer saying 'serious error occured while reading history folder'. So kindly suggest me in making the DSO '0PERS_BOD' active. I hope this will solve the problem.
Thanks in advance,
Steve.

Hi,
'Version A of DataStore object 0PERS_BOD does not exist' is not the estimate message.
1. RSA1
2. BI Content
3. Object types
4. grouping -> only necessary objects
5. data store object -> select object
6. search to "0pers_"
7. mark "0PERS_BOD", "0PERS_VAR" and "0PERS_WTE" -> Transfer Selection
8. Install
Sven

Similar Messages

  • Error when activating the master data

    Hi
    I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
    <b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
    If anyone came across this kind of problem plz share the solution.
    Regards
    Annie

    Hi
    I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
    There are no short dumps in ST22
    Regards
    Annie

  • Error when Activating the data store object

    Hi All,
    I have to get the following below errors when i was activating the ods.
    Transfer structure prefix for source systemt T90CLNT is not defined
    Error when creating the export datasource and dependent objects
    could anyone help me on this issue.
    Regards,
    Naveen.
    Edited by: naveen naveen on Feb 2, 2009 6:35 AM

    Hi Naveen,
    Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
    and also Check the BW self System whether it is active or not. then try activating DSO
    hope this helps
    Regards,
    Daya Sagar
    Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

  • Issue related with the Date Format --- error when activating the DSO

    Hi Friends..
    plz help me to fix the issue ...im getting when activating the DSO...
    Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
    is there any routine to solve this or i have to go for data selection in info package ......
    I have searched in the forum also..but im not able to fix..plz help
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
      Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
      Value '20101502' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
      Value '20101402' of characteristic 0DATE is not plausible
    Thanks
    Baskar
    Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

    Hi Friends..
    plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
    Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
    Value '20101502' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Thanks
    Baskar

  • Abort system error when opening the BEx query

    When runing the Bex query I get this error
    ' SQL Error 1578  - Abort system error in program SAPLRRKO and form RSRDR;SRRK0F30_01_'
      Diagnosis: Internal error is a targetted termination since the program has an incorrect status.
    Please advice me how to correct this issue.
    Thanks in advance.
    Taj

    Hey,
    Thanks for your answer , I assigned a  points to you. still I need more info on this then what to do further.If this was caused due to program error then what I have to do.
    Version: 3.50, Package :SAPak35012 .
    Please let me know is this something basis needs to take care of this? .
      Looking forward to hear from you.
    Taj
    Message was edited by: Tamkris Taj
    Message was edited by: Tamkris Taj

  • Error when activating the Info set

    Hi all,
    I have created an Infoset on 2 infocubes, in both of them i am having navigational attributes, but either in infoset backend or front end i am not getting the navigational attributes.
    For getting these navigational attributes i added masterdata objects for which i need to get navigational attributes to the infoset and mapped them to the data target objects.
    while the infoset is having only cubes the infoset worked fine expect nav attributes.when i added these masterdata objects to the infoset i am getting error while activating the info set.
    It does not have any description even to find out the solution.
    Please let me know the solution as soon as possible.
    thanks in advance,

    Hi Sarau,
    I think Multiprovider ( Multi Cube ) is the best option than Infoset.......
    with hopes
    ARS

  • Error when activating the BSP aplication of Demo Examples in SAP XI 7.0

    Hi all,
    I'm configuring the Demo Examples of SAP XI 7.0 (SAP BASIS 7.0 Content), when i activate the service "sxidemo_agcy_ui" and then edit this service as tutorial of the Configuration Guide document and then save all modification, finally choose "Test Service", I get an error message in the web page as below:
    Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:  BSP Exception: Das Objekt default.htm in der URL /sap/bc/bsp/sap/sxidemo_agcy_ui/default.htm?sap-client=105&sap-sessioncmd=open ist nicht gültig.
    Error type:
    Your SAP Business Server Pages Team
    After, i try to test all service in the BUSINESS SERVICE PAGE (default_host/sap/bc/bsp ...), i get a same error message as above.
    I have followed the SAP Note 517484 to active all service necessary in order to run the BSP application. But i have still get the same error message and BSP in my XI System is still not available.
    Anyone have met a same situation as me or anyone know resolve this problem, could you please help me?
    Thanks a lot in advance,
    Vinh Vo

    Hi Vinh,
    You might want need to go into the abap development workbench (tcode se80), in here there are BSP application program that might not get activate and publish, and also the Internet Service/WEBGUI.
    check and see if all require service are published.
    thanks,
    Nhung

  • Error when activating the copied data elem.:Medium key word in language DE

    Hello,
    I have copied data element dats and created a z data element for myself and added the text description.
    Am getting following error.Please guide me for the same-
      Check data element ZDATS1 (C04EAPHALES/15.01.10/16:37)
      Medium key word in language DE: length 18 > maximum length 10
      Data element ZDATS1 is inconsistent
    Please help me resolve the issue.
    Thanks.
    Edited by: sanjivrd on Jan 15, 2010 12:21 PM

    Hi,
    It won't take from domain it always takes from data element... data element only stores the semantic information... Try to change the domain description to someother and then activate both domain and dataelement...and also table and then see...It will take from data element only.
    Regards,
    Nagaraj

  • Errors when activating ODS

    Hello,
    i am trying to activate freshly installed ODS from business content.
    it gives following errors:
         RFC connection to source system BWDCLNT210 is damaged ==> no Metadata upload     
         Error when creating the export DataSource and dependent Objects     
    Please suggest...
    regards,

    hi Aby,
    try if right click source system BWDCLNT210 'restore'
    check threads
    RFC connection to source system Damaged
    check oss note 597326 - Activating ODS: Error when creating the export DataSource
    Symptom
    When you activate or transport ODS objects, the following errors appear in the log:
    "The creation of the export DataSource failed". Message number RSBM 035
    "Error &1 in function module &2". Message number RSBM 006
    "Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
    "Error when activating the ODS object &1". Message number RSDODSO 168
    Other terms
    RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
    Reason and Prerequisites
    A characteristic involved is active but it is using new or inactive attributes.
    Characteristics involved are all characteristics used in the ODS object.
    Solution
    Check all characteristics involved as described in the following:
    Check the Compounding and Attributes tabs in the characteristics maintenance.
    All characteristics here must be active. This is displayed by a green icon.
    If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
    After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
    help.

  • WAD-Internal Error when generating the history. Use a different view!

    Hello,
    When i am trying to open the WAD(Webapplication designer), BEx Open Dialog is being displayed with the message "Internal Error when generating the history. Use a different view"
    how to solve this problem...?
    Thanks
    kumar

    Hello Jeff,
    Thanks for your help, and it has solved my problem. Under Activate Personalization in BEx...
    I have seen 2 more options
    -Variable Personalization
    -Web Reportperson
    Could you inform me the pupose of above 2 options?
    Regards..

  • Getting error when activating serial key with cs6 creative suit  specifically for the Flash Builder 4.6

    I got he the software Adobe Creative  Master Suite CS6
    was able to activate all the software  except   Flash Builder 4.6  keep getting message Serial number is not valid cs6 master collection serial.
    Is there anything else needed to be done when activating  the program.
    Please advise

    I have been able to resolve by completing clean/complete uninstall and re-install -- as per these instructions:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Error while Activating / running Bex queries/reports

    Hello
    I have following ERRORs while activating / running BEx reports/queries.
    1. While Activating BEx reports, I keel getting following ERRORS
    Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
    Error when activating element BX7FOOKQB4588RROCBTC2YVZN
    BEx transport request 'BIDK901352' is not available or not suitable
    2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
    3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
    4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ? 
    Thanks, Sorry I have asked multiple questions, in jst one thread.
    BI

    Goto SE03 -->Search for Objects in Requests/Tasks  option , select the object type and execute it will give all the transports it has collected before ..
    Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
    Thanks,
    Ravi

  • Activation of BEx History failed during SPRO setting

    Hi,
    I was getting error message saying that "Activation of BEx History failed".While configuration setting in SPRO
    After upgrade system from BW 3.x to BI 7.0
    I was getting the error message during setting in SPRO
    Please some one would provide me answer.

    The error is due to authorization.
    You must ask your BASIS guy to open up the server to allow changes.
    Once the BASIS did that, just rerun the TCode and it will works correctly.
    Hope it helps.

  • Error while activating the DTP

    Dear all,
    We are using BI7.00. For one of our reports, the data is transferred from one cube to another cube. When the DTP which transfers the data is activated, the following error appears.
    Error from PSA ****
    Message no. RSAODS000
    Error when activating Data Transfer Process DTP_D5Q7YV8OBC64VH1DG6MY6O0UI
    There is no other information regarding this message. I have tried deleting the DTP and re-creating a new one but still problem persists.
    Can experts throw light on this?
    Regards,
    M.M

    Hi Magesh,
    Please check the below solution:
    you can execute the 'RS_TRANSTRU_ACTIVATE_ALL' program for the 3.x InfoSource(s) affected.
    SAP NetWeaver 2004s BI
               Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package will become available once Note 914304 with the short text, "SAPBINews BI 7.0 SP10", which describes this Support Package in more detail, is released for customers.
    To provide information in advance, the note mentioned above may already be available before the Support Package is released. In this case, however, the short text will still contain the words "Preliminary version".
    Note No: 968504
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=968504
    With Regards,
    Ravi Kanth

  • Error when activating update rule

    HI BI Expert,
    The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
    Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
    Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
    IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
    Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
    Thanks.

    Hi,
    When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
    Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
    If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
    Rgds,
    Vikram.
    Rgds,
    Vikram.

Maybe you are looking for

  • How do I stop Firefox from filling in my password?

    I want to prevent other people from signing in to websites when they use my computer.

  • How do you make menuTabs open a new inside the tab selected?

    Hi all, I am very frustrated with menuTabs because it won't allow me to open a new page in menuTabs instead it opens my page outside of my tabs . I don't understand why this functionality is not available when all other tab controls function this way

  • Oracle eBusiness R12 wont install on Windows 2003

    I have been trying for 3 days to install the current (downloaded from Oracle Monday 18th Jan 2010) eBusiness suite on Windows 2003 with no success. The installation always fails on Step 3 of 5 - Registering Applications Technology Stack with error RW

  • Problem in number range assignment

    Hi All, we have requirement to create a number range object(SNRO). Using FM NUMBER_GET_NEXT creating numbers. Here i am facing problem, when  i  am executing FM directly it is getting next number. But it is not updating it as current number in number

  • Ways to get the line number in sapscript form?

    Hi, all. May I know whether that there are ways to get the line number in sapscript form? For example, I want to get to know the certain line number in the MAIN window. Thanks in advance.