Error when activating the copied data elem.:Medium key word in language DE

Hello,
I have copied data element dats and created a z data element for myself and added the text description.
Am getting following error.Please guide me for the same-
Check data element ZDATS1 (C04EAPHALES/15.01.10/16:37)
Medium key word in language DE: length 18 > maximum length 10
Data element ZDATS1 is inconsistent
Please help me resolve the issue.
Thanks.
Edited by: sanjivrd on Jan 15, 2010 12:21 PM

Hi,
It won't take from domain it always takes from data element... data element only stores the semantic information... Try to change the domain description to someother and then activate both domain and dataelement...and also table and then see...It will take from data element only.
Regards,
Nagaraj

Similar Messages

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Error when extracting the text data

Hi all
I am getting an error when transfering the text data thru flat files .
It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
pls suggest me.
thanks in advance
karna

hi,
you have to decline 0LANGU, STTXT(short text), MDTXT(medium text),
LGTXT(long text), and respective key field(primary key) of attribute for
text data source. give the above five info object's in transfer structure for
text data source and activate it.
if helpful provide points
regards
harikrishna.N

Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit Parti

The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.

Error when reading the access data for the Adapter Engine

We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xpd.dbcixpd</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Pls suggest if anyone has gone thru same problem.
Regards
Amar

I got the same problem while using RFC lookup.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.tx1.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea ,when we get this error usually.

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

Error when tranfering the text data

Hi all
I am getting an error when transfering the text data thru flat files .
It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
pls suggest me.
thanks in advance
karna

here are teh steps:
1) craete source system in BW as say Flat_file
2) go to inforsource --? create inforsource --> right clik on infosource and say assign datasource
3) select flat_file here and say YES
4) then for flat file, trnafer structure mapping has to be done manually. so in trs struc screen ,go to datasource tab and enter your corresponding infoobject.
5) then go to tranfer rule tab and propose the rule.
If it helps, please assign points. In case of doubt, please get back
Regards
Pankaj

Error when reading the access data(URL,user, password) for Adapter Engine

Hi,
We are getting this error in production system
"SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
Its urgent. We are in support project.
regards,
john

Hi jhon,
please check the following threads to resolve the problem.
AE_DETAILS_GET_ERROR
Error : no_adapter_engine_found: Unable to find Adapter Engine
regards
mahesh.

Issue related with the Date Format --- error when activating the DSO

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...
Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
is there any routine to solve this or i have to go for data selection in info package ......
I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
Value '20101402' of characteristic 0DATE is not plausible
Thanks
Baskar
Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
Value '31122009' of characteristic 0DATE is not plausible
Thanks
Baskar

Error when Activating the data store object

Hi All,
I have to get the following below errors when i was activating the ods.
Transfer structure prefix for source systemt T90CLNT is not defined
Error when creating the export datasource and dependent objects
could anyone help me on this issue.
Regards,
Naveen.
Edited by: naveen naveen on Feb 2, 2009 6:35 AM

Hi Naveen,
Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
and also Check the BW self System whether it is active or not. then try activating DSO
hope this helps
Regards,
Daya Sagar
Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error when activating the Info set

Hi all,
I have created an Infoset on 2 infocubes, in both of them i am having navigational attributes, but either in infoset backend or front end i am not getting the navigational attributes.
For getting these navigational attributes i added masterdata objects for which i need to get navigational attributes to the infoset and mapped them to the data target objects.
while the infoset is having only cubes the infoset worked fine expect nav attributes.when i added these masterdata objects to the infoset i am getting error while activating the info set.
It does not have any description even to find out the solution.
Please let me know the solution as soon as possible.
thanks in advance,

Hi Sarau,
I think Multiprovider ( Multi Cube ) is the best option than Infoset.......
with hopes
ARS

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error while activating the copy of the standard module

Hi,
I wanted to create a copy of the module material_read_all and so I copied the entire function group.
Now when I am trying to activate it , I am getting syntax error saying that the field does not exist in the global declarations. When I double click on the field name it takes me to another modules of the same function group where the said field is an export parameter.
I cross checked with the standard module and there also no explicit declaration is given. I also tried declaraing the variable again and then activating.But on doing it I got different results from both the modules for the same input and so I had to delete and create it again.
The same thing is happening with other modules also which I am trying to copy.
Can anyone please help me with this.
For copying the function group I entered the main program name in se38 and clicked on copy. It then asked me to copy the modules so I just added 'Z' before the modules to make a duplicate copy.
It is very very urgent.
Thanks in advance
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 11:50 AM

Hi,
I have tried activating all the includes individually and then the main program. But still I am getting the errors. While activating the includes on checking for the syntax error it showed error but on clicking on activating it got activated. But same thing sis not working for the main program.
I also tried with 'activate anyway' but even after that syntax errors are there with the field decalrations.

Error when activating the BEx history

Hi,
When I am trying to activate the BEx history through transaction 'RS_PERS_ACTIVATE', I am getting the error saying 'Activation of BEx History failed'. Then when I checked the DSO '0PERS_BOD' it is inactive also the corresponding table '/BI0/APERS_BOD00' not exists in data dictionary table. Because of this I am getting Error message while opening the BEx analyzer saying 'serious error occured while reading history folder'. So kindly suggest me in making the DSO '0PERS_BOD' active. I hope this will solve the problem.
Thanks in advance,
Steve.

Hi,
'Version A of DataStore object 0PERS_BOD does not exist' is not the estimate message.
1. RSA1
2. BI Content
3. Object types
4. grouping -> only necessary objects
5. data store object -> select object
6. search to "0pers_"
7. mark "0PERS_BOD", "0PERS_VAR" and "0PERS_WTE" -> Transfer Selection
8. Install
Sven

Error when activating the copied data elem.:Medium key word in language DE

Similar Messages

Maybe you are looking for