Error when Activating the data store object

Hi All,
I have to get the following below errors when i was activating the ods.
Transfer structure prefix for source systemt T90CLNT is not defined
Error when creating the export datasource and dependent objects
could anyone help me on this issue.
Regards,
Naveen.
Edited by: naveen naveen on Feb 2, 2009 6:35 AM

Hi Naveen,
Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
and also Check the BW self System whether it is active or not. then try activating DSO
hope this helps
Regards,
Daya Sagar
Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

Similar Messages

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Issue related with the Date Format --- error when activating the DSO

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...
Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
is there any routine to solve this or i have to go for data selection in info package ......
I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
Value '20101402' of characteristic 0DATE is not plausible
Thanks
Baskar
Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
Value '31122009' of characteristic 0DATE is not plausible
Thanks
Baskar

Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error when activating the BEx history

Hi,
When I am trying to activate the BEx history through transaction 'RS_PERS_ACTIVATE', I am getting the error saying 'Activation of BEx History failed'. Then when I checked the DSO '0PERS_BOD' it is inactive also the corresponding table '/BI0/APERS_BOD00' not exists in data dictionary table. Because of this I am getting Error message while opening the BEx analyzer saying 'serious error occured while reading history folder'. So kindly suggest me in making the DSO '0PERS_BOD' active. I hope this will solve the problem.
Thanks in advance,
Steve.

Hi,
'Version A of DataStore object 0PERS_BOD does not exist' is not the estimate message.
1. RSA1
2. BI Content
3. Object types
4. grouping -> only necessary objects
5. data store object -> select object
6. search to "0pers_"
7. mark "0PERS_BOD", "0PERS_VAR" and "0PERS_WTE" -> Transfer Selection
8. Install
Sven

Error while activating the data into DSO

Hi
My base DSO is used to load 4 other data targets.
In process chain, after the base DSO gets activated there are 4 DTPu2019s running to load the data from base DSO to other DSO and 3 cubes.
When loading to other DSO, We have encountered an error
Object is currently locked by BI Remote
Lock not set for : Activating data in DSO
Activation of M records terminated.
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
2. What difference does it make when loading DSO to DSO and cube parallel?
Thanks
Annie

Hi Annie.....
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
Do you mean to say that the loading in the 2nd level DSO was successful .....but the activation failed ?
Have you checked in SM12 that whether that 2nd level DSO is somehow locked or not ?
Is any further targets getting loaded from this 2nd level DSO ?
Look suppose u r loading a DSO A.........and in the mean time some load starts from DSO A to some other target(it may be DSO or a cube).........then the activation in the DSO A will fail........because since the last request in the DSO A is not activated....that request will not get considered in the subsequent load....and since the load is already in progress....system will not allow to activate any new request......
Another option can be that DSO A is getting loaded from some other targets as well.......so since still some load is in progress in this target....it will not allow the activation....
So check it and atart the activation again..
2. What difference does it make when loading DSO to DSO and cube parallel?
The main difference is that there is no activation concept in the cube....so a cube may get loaded from several targets in parallel......
A DSO can also get loaded in parallel.......but activation should start once all the loads get completed successfully.....
Regards,
Debjani....

Error - When Activating Generic Data source in BW DEV

Hi,
I am working in BI 7.0
I created a Generic Data source
I had checked in RSA3 , it is showing records too.
i replicated the Datasource in BW
Datasource is available in BW
Then I try to activated the Datasource
because
when i try to create tranformation for the data source then
It will show this message (and transformation is not created)
Source RSDS ZCOPC_C10 GDVCLNT110 does not exist
My Data source name is ZCOPC_C10 for source system GDVCLNT110
then I will try to Activated the Data source First
then also it will show the Error like this
Post Processing/Checking the Activation for DataSource ZCOPC_C10 GDVCLNT110
&
Error when activating DataSource ZCOPC_C10 GDVCLNT110
and the
DataSource ZCOPC_C10 (GDVCLNT110) could not be activated
can some body help me to solve this problem
sure you can get the points
Thanks
prasanna

Hi Oscar,
The Data source is not Active in BW, I had checked in Data source defination.
when I activate the Data source .
I received the Message / Error
Activation of Objects with Type DataSource
Saving Objects with Type DataSource
Internal Activation (DataSource )
Preprocessing / Creation of DDIC Objects for DataSource ZCOPC_C11 GDVCLNT110
Save DDIC object /BIC/CAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110 - T)
Save DDIC object /BIC/CAZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Appli)
Save DDIC object /BIC/CCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110 - Tab)
Save DDIC object /BIC/CCZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Chara)
Save DDIC object /BIC/B0001051 (PSA for ZCOPC_C11 GDVCLNT110 Itemization)
Writing of object catalog entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CAZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Activate all Dictionary objects ( 6 ):
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataSource ZCOPC_C11 GDVCLNT110
Error when activating DataSource ZCOPC_C11 GDVCLNT110Deletion of Unused Dictionary Objects ( 6)
All DDIC objects have been activated / deleted
Deletion of Object Catalog Entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCAZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CAZCOPC_C00002000 deleted from TADIR
Object TABL /BIC/CCZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCCZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CCZCOPC_C00002000 deleted from TADIR
All unused DDIC objects have been deleted
Thanks
prasanna

Error when activating the Info set

Hi all,
I have created an Infoset on 2 infocubes, in both of them i am having navigational attributes, but either in infoset backend or front end i am not getting the navigational attributes.
For getting these navigational attributes i added masterdata objects for which i need to get navigational attributes to the infoset and mapped them to the data target objects.
while the infoset is having only cubes the infoset worked fine expect nav attributes.when i added these masterdata objects to the infoset i am getting error while activating the info set.
It does not have any description even to find out the solution.
Please let me know the solution as soon as possible.
thanks in advance,

Hi Sarau,
I think Multiprovider ( Multi Cube ) is the best option than Infoset.......
with hopes
ARS

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Error when reading the data of infoprovider

Hello,
I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows:
Error reading the data of InfoProvider ZDPPTGR1
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Has anybody experience with solving this problem? It sounds like a bigger problem - can somebody confirm this? Or is it a problem which is easy to solve?
Thanks for answering!
Kind regards
Heinz

Hi,
Please follow the below threads. They are similar to the error you are facing and they may help you with the issue ::
Remote cube - uncaught exception
DBMAN350 Error reading MultiCube data over aggregate
Error reading the data of InfoProvider 0TCT_VC01
Regards,
Arpit

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

Error when Activating the data store object

Similar Messages

Maybe you are looking for