Error when adding append structure

Hi All,
I need help. We have a "new" source system (GRC), but all the required config was put in place by the BASIS team.
The required datasource was activated and tested - all working 100%.
As soon as an append structure is added, no matter what the fields within the append are, we get the following error:
unsupported field type 'P', correct DataSource definition
The structure that the datasource is based on has enhancement category = Can be enhanced(Char and numeric).
Any ideas would be greatly appreciated as this is rather urgent.
Thanks
Werner

Hi,
Field names/types etc...in the append structure makes no difference. We have tried CHAR and NUMC - all gives the same error.
If you use a different field, with different specifications, then the exact same error appears with the new field.
This leads us to believe that there might be a setting somewhere that needs to be maintained to allow append structures to GRC datasources.

Similar Messages

Error when adding a partition to a materlialized view

Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
Narayan

SQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan

Vehicle Scheduling Error:Error when creating transport structures in live C

HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMol

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

Error when adding Essbase server...

Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
h

The things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck,

Library error when adding contact or when logging in

The messenger server has a replica of the partition holding the users.
It's an OES 2 sp2 server, and the GW Messenger is 2.04.
Sometimes we see an error that says 'Library error' when adding a contact, or it doesn't show all users that exists with the search parameter given.
We also sporadically see a 'Library error' when some users log in to it.
Looking in the log I see an error that says 0xAE16 when users log in fails.
I can find the 0xAE11 error in the TID's but not the 0xAE16, I did find an article on the forums, mentioning this problem http://forums.novell.com/novell-prod...or-server.html, they mention memory problems, so it seems to me there is a bug that needs fixing.

I've disabled the '/diruseralias-"Internet EMail Address"' setting that was set up in the strtup.ma and strtup.aa scripts.
I've also, for now at least, chosen another replica.
I haven't seen the errors yet, so here's hoping...

Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled

When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!

Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Error when creating Transfer structures

Dear Gurus,
I get the following error when creating the transfer structure.
Error when creating transfer structure /BIC/CCBD1CL_OMAT002 in source system ERPCLNT400
Message no. R3104
DiagnosisAn error occurred when creating transfer structure /BIC/CCBD1CL_OMAT002 as an IDoc segment in source system ERPCLNT400 .
System Response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system ERPCLNT400 to identify the error, and remove the cause.

hi,
Refer OSS Note 147195 --- Error activating the transfer rules
Check the transfer mehtod is PSA ? and Activate Source Sys Conn again
Replicate the DS again and Activate TR (...'also check are there inconsistencies in transfer str)

Error when activate standard structure

Hi guru,
i've a serious problem about the activation of a standard structure,the check (for error) pass without problem, but when I want to activate it there is this exception :
CALL SCREEN (not modal) in modal dialog box not allowed
Anybody can help me ?
Thanks.
Angelo.
Edited by: Angelo Abbasci on Jan 13, 2009 2:52 PM

HI,
I try but cant do much as it is a standard structure..
You could try to change the structure save it. The n execute the transaction again and try to activate..
You added the field with Access Key or through Append structure..?
If you get the error again then try and copy paste the error report important parts..

TableSorter errors when adding new data

so here is the deal:
I am using the TableSorter.java helper class with DefaultTableModel
from: http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
It works great when the data is static and I get it for the first time. however, occationally, when adding new data I get a NullPointerException error.
in use:
DefaultTableModel.addRow()
DefaultTableModel.removeRow() and
DefaultTableModel.insertRow() methods.
Error:
java.lang.ArrayIndexOutOfBoundsException: 5
 at com.shared.model.TableSorter.modelIndex(TableSorter.java:294)
 at com.shared.model.TableSorter.getValueAt(TableSorter.java:340)
 at javax.swing.JTable.getValueAt(Unknown Source)
 at javax.swing.JTable.prepareRenderer(Unknown Source)...
code problem I:
 public Object getValueAt(int row, int column)
 return tableModel.getValueAt(modelIndex(row), column);
 }code problem II:
 public int modelIndex(int viewIndex)
 return getViewToModel()[viewIndex].modelIndex;
 }TableSroter class:
package com.shared.model;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
import javax.swing.*;
import javax.swing.event.TableModelEvent;
import javax.swing.event.TableModelListener;
import javax.swing.table.*;
* TableSorter is a decorator for TableModels; adding sorting
* functionality to a supplied TableModel. TableSorter does
* not store or copy the data in its TableModel; instead it maintains
* a map from the row indexes of the view to the row indexes of the
* model. As requests are made of the sorter (like getValueAt(row, col))
* they are passed to the underlying model after the row numbers
* have been translated via the internal mapping array. This way,
* the TableSorter appears to hold another copy of the table
* with the rows in a different order.
* 
* TableSorter registers itself as a listener to the underlying model,
* just as the JTable itself would. Events recieved from the model
* are examined, sometimes manipulated (typically widened), and then
* passed on to the TableSorter's listeners (typically the JTable).
* If a change to the model has invalidated the order of TableSorter's
* rows, a note of this is made and the sorter will resort the
* rows the next time a value is requested.
* 
* When the tableHeader property is set, either by using the
* setTableHeader() method or the two argument constructor, the
* table header may be used as a complete UI for TableSorter.
* The default renderer of the tableHeader is decorated with a renderer
* that indicates the sorting status of each column. In addition,
* a mouse listener is installed with the following behavior:
* <ul>
* <li>
* Mouse-click: Clears the sorting status of all other columns
* and advances the sorting status of that column through three
* values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to
* NOT_SORTED again).
* <li>
* SHIFT-mouse-click: Clears the sorting status of all other columns
* and cycles the sorting status of the column through the same
* three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
* <li>
* CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except
* that the changes to the column do not cancel the statuses of columns
* that are already sorting - giving a way to initiate a compound
* sort.
* </ul>
* 
* This is a long overdue rewrite of a class of the same name that
* first appeared in the swing table demos in 1997.
* @author Philip Milne
* @author Brendon McLean
* @author Dan van Enckevort
* @author Parwinder Sekhon
* @version 2.0 02/27/04
public class TableSorter extends AbstractTableModel
 protected TableModel tableModel;
 public static final int DESCENDING = -1;
 public static final int NOT_SORTED = 0;
 public static final int ASCENDING = 1;
 private static Directive EMPTY_DIRECTIVE = new Directive(-1, NOT_SORTED);
 public static final Comparator COMPARABLE_COMAPRATOR = new Comparator()
 public int compare(Object o1, Object o2)
 return ((Comparable) o1).compareTo(o2);
 public static final Comparator LEXICAL_COMPARATOR = new Comparator()
 public int compare(Object o1, Object o2)
 return o1.toString().compareTo(o2.toString());
 private Row[] viewToModel;
 private int[] modelToView;
 private JTableHeader tableHeader;
 private MouseListener mouseListener;
 private TableModelListener tableModelListener;
 private Map columnComparators = new HashMap();
 private List sortingColumns = new ArrayList();
 public TableSorter()
 this.mouseListener = new MouseHandler();
 this.tableModelListener = new TableModelHandler();
 public TableSorter(TableModel tableModel)
 this();
 setTableModel(tableModel);
 public TableSorter(TableModel tableModel, JTableHeader tableHeader)
 this();
 setTableHeader(tableHeader);
 setTableModel(tableModel);
 private void clearSortingState()
 viewToModel = null;
 modelToView = null;
 public TableModel getTableModel()
 return tableModel;
 public void setTableModel(TableModel tableModel)
 if (this.tableModel != null)
 this.tableModel.removeTableModelListener(tableModelListener);
 this.tableModel = tableModel;
 if (this.tableModel != null)
 this.tableModel.addTableModelListener(tableModelListener);
 clearSortingState();
 fireTableStructureChanged();
 public JTableHeader getTableHeader()
 return tableHeader;
 public void setTableHeader(JTableHeader tableHeader)
 if (this.tableHeader != null)
 this.tableHeader.removeMouseListener(mouseListener);
 TableCellRenderer defaultRenderer = this.tableHeader.getDefaultRenderer();
 if (defaultRenderer instanceof SortableHeaderRenderer)
 this.tableHeader.setDefaultRenderer(((SortableHeaderRenderer) defaultRenderer).tableCellRenderer);
 this.tableHeader = tableHeader;
 if (this.tableHeader != null)
 this.tableHeader.addMouseListener(mouseListener);
 this.tableHeader.setDefaultRenderer
 new SortableHeaderRenderer(this.tableHeader.getDefaultRenderer())
 public boolean isSorting()
 return sortingColumns.size() != 0;
 private Directive getDirective(int column)
 for (int i = 0; i < sortingColumns.size(); i++)
 Directive directive = (Directive)sortingColumns.get(i);
 if (directive.column == column)
 return directive;
 return EMPTY_DIRECTIVE;
 public int getSortingStatus(int column)
 return getDirective(column).direction;
 private void sortingStatusChanged()
 clearSortingState();
 fireTableDataChanged();
 if (tableHeader != null)
 tableHeader.repaint();
 public void setSortingStatus(int column, int status)
 Directive directive = getDirective(column);
 if (directive != EMPTY_DIRECTIVE)
 sortingColumns.remove(directive);
 if (status != NOT_SORTED)
 sortingColumns.add(new Directive(column, status));
 sortingStatusChanged();
 protected Icon getHeaderRendererIcon(int column, int size)
 Directive directive = getDirective(column);
 if (directive == EMPTY_DIRECTIVE)
 return null;
 return new Arrow(directive.direction == DESCENDING, size, sortingColumns.indexOf(directive));
 private void cancelSorting()
 sortingColumns.clear();
 sortingStatusChanged();
 public void setColumnComparator(Class type, Comparator comparator)
 if (comparator == null)
 columnComparators.remove(type);
 else
 columnComparators.put(type, comparator);
 protected Comparator getComparator(int column)
 Class columnType = tableModel.getColumnClass(column);
 Comparator comparator = (Comparator) columnComparators.get(columnType);
 if (comparator != null)
 return comparator;
 if (Comparable.class.isAssignableFrom(columnType))
 return COMPARABLE_COMAPRATOR;
 return LEXICAL_COMPARATOR;
 private Row[] getViewToModel()
 if (viewToModel == null)
 int tableModelRowCount = tableModel.getRowCount();
 viewToModel = new Row[tableModelRowCount];
 for (int row = 0; row < tableModelRowCount; row++)
 viewToModel[row] = new Row(row);
 if (isSorting())
 Arrays.sort(viewToModel);
 return viewToModel;
 public int modelIndex(int viewIndex)
 return getViewToModel()[viewIndex].modelIndex;
 private int[] getModelToView()
 if (modelToView == null)
 int n = getViewToModel().length;
 modelToView = new int[n];
 for (int i = 0; i < n; i++)
 modelToView[modelIndex(i)] = i;
 return modelToView;
 // TableModel interface methods
 public int getRowCount()
 return (tableModel == null) ? 0 : tableModel.getRowCount();
 public int getColumnCount()
 return (tableModel == null) ? 0 : tableModel.getColumnCount();
 public String getColumnName(int column)
 return tableModel.getColumnName(column);
 public Class getColumnClass(int column)
 return tableModel.getColumnClass(column);
 public boolean isCellEditable(int row, int column)
 return tableModel.isCellEditable(modelIndex(row), column);
 public Object getValueAt(int row, int column)
 return tableModel.getValueAt(modelIndex(row), column);
 public void setValueAt(Object aValue, int row, int column)
 tableModel.setValueAt(aValue, modelIndex(row), column);
 // Helper classes
 private class Row implements Comparable
 private int modelIndex;
 public Row(int index)
 this.modelIndex = index;
 public int compareTo(Object o)
 int row1 = modelIndex;
 int row2 = ((Row) o).modelIndex;
 for (Iterator it = sortingColumns.iterator(); it.hasNext();)
 Directive directive = (Directive) it.next();
 int column = directive.column;
 Object o1 = tableModel.getValueAt(row1, column);
 Object o2 = tableModel.getValueAt(row2, column);
 int comparison = 0;
 // Define null less than everything, except null.
 if (o1 == null && o2 == null)
 comparison = 0;
 } else if (o1 == null)
 comparison = -1;
 } else if (o2 == null)
 comparison = 1;
 } else {
 comparison = getComparator(column).compare(o1, o2);
 if (comparison != 0)
 return directive.direction == DESCENDING ? -comparison : comparison;
 return 0;
 private class TableModelHandler implements TableModelListener
 public void tableChanged(TableModelEvent e)
 // If we're not sorting by anything, just pass the event along.
 if (!isSorting())
 clearSortingState();
 fireTableChanged(e);
 return;
 // If the table structure has changed, cancel the sorting; the
 // sorting columns may have been either moved or deleted from
 // the model.
 if (e.getFirstRow() == TableModelEvent.HEADER_ROW)
 cancelSorting();
 fireTableChanged(e);
 return;
 // We can map a cell event through to the view without widening
 // when the following conditions apply:
 // a) all the changes are on one row (e.getFirstRow() == e.getLastRow()) and,
 // b) all the changes are in one column (column != TableModelEvent.ALL_COLUMNS) and,
 // c) we are not sorting on that column (getSortingStatus(column) == NOT_SORTED) and,
 // d) a reverse lookup will not trigger a sort (modelToView != null)
 // Note: INSERT and DELETE events fail this test as they have column == ALL_COLUMNS.
 // The last check, for (modelToView != null) is to see if modelToView
 // is already allocated. If we don't do this check; sorting can become
 // a performance bottleneck for applications where cells
 // change rapidly in different parts of the table. If cells
 // change alternately in the sorting column and then outside of
 // it this class can end up re-sorting on alternate cell updates -
 // which can be a performance problem for large tables. The last
 // clause avoids this problem.
 int column = e.getColumn();
 if (e.getFirstRow() == e.getLastRow()
 && column != TableModelEvent.ALL_COLUMNS
 && getSortingStatus(column) == NOT_SORTED
 && modelToView != null)
 int viewIndex = getModelToView()[e.getFirstRow()];
 fireTableChanged(new TableModelEvent(TableSorter.this,
 viewIndex, viewIndex,
 column, e.getType()));
 return;
 // Something has happened to the data that may have invalidated the row order.
 clearSortingState();
 fireTableDataChanged();
 return;
 private class MouseHandler extends MouseAdapter
 public void mouseClicked(MouseEvent e)
 JTableHeader h = (JTableHeader) e.getSource();
 TableColumnModel columnModel = h.getColumnModel();
 int viewColumn = columnModel.getColumnIndexAtX(e.getX());
 int column = columnModel.getColumn(viewColumn).getModelIndex();
 if (column != -1)
 int status = getSortingStatus(column);
 if (!e.isControlDown())
 cancelSorting();
 // Cycle the sorting states through {NOT_SORTED, ASCENDING, DESCENDING} or
 // {NOT_SORTED, DESCENDING, ASCENDING} depending on whether shift is pressed.
 status = status + (e.isShiftDown() ? -1 : 1);
 status = (status + 4) % 3 - 1; // signed mod, returning {-1, 0, 1}
 setSortingStatus(column, status);
 private static class Arrow implements Icon
 private boolean descending;
 private int size;
 private int priority;
 public Arrow(boolean descending, int size, int priority)
 this.descending = descending;
 this.size = size;
 this.priority = priority;
 public void paintIcon(Component c, Graphics g, int x, int y)
 Color color = c == null ? Color.GRAY : c.getBackground();
 // In a compound sort, make each succesive triangle 20%
 // smaller than the previous one.
 int dx = (int)(size/2*Math.pow(0.8, priority));
 int dy = descending ? dx : -dx;
 // Align icon (roughly) with font baseline.
 y = y + 5*size/6 + (descending ? -dy : 0);
 int shift = descending ? 1 : -1;
 g.translate(x, y);
 // Right diagonal.
 g.setColor(color.darker());
 g.drawLine(dx / 2, dy, 0, 0);
 g.drawLine(dx / 2, dy + shift, 0, shift);
 // Left diagonal.
 g.setColor(color.brighter());
 g.drawLine(dx / 2, dy, dx, 0);
 g.drawLine(dx / 2, dy + shift, dx, shift);
 // Horizontal line.
 if (descending) {
 g.setColor(color.darker().darker());
 } else {
 g.setColor(color.brighter().brighter());
 g.drawLine(dx, 0, 0, 0);
 g.setColor(color);
 g.translate(-x, -y);
 public int getIconWidth()
 return size;
 public int getIconHeight()
 return size;
 private class SortableHeaderRenderer implements TableCellRenderer
 private TableCellRenderer tableCellRenderer;
 public SortableHeaderRenderer(TableCellRenderer tableCellRenderer)
 this.tableCellRenderer = tableCellRenderer;
 public Component getTableCellRendererComponent(JTable table,
 Object value,
 boolean isSelected,
 boolean hasFocus,
 int row,
 int column)
 Component c = tableCellRenderer.getTableCellRendererComponent(table,
 value, isSelected, hasFocus, row, column);
 if (c instanceof JLabel) {
 JLabel l = (JLabel) c;
 l.setHorizontalTextPosition(JLabel.LEFT);
 int modelColumn = table.convertColumnIndexToModel(column);
 l.setIcon(getHeaderRendererIcon(modelColumn, l.getFont().getSize()));
 return c;
 private static class Directive
 private int column;
 private int direction;
 public Directive(int column, int direction)
 this.column = column;
 this.direction = direction;
}any input will be appreciated.
thanks
Peter

The code you posted doesn't help us at all. Its just a duplicate of the code from the tutorial. The custom code is what you have written. For example do you update the TableModel from the Event Thread? Do you update the SortModel or the DefaultTableModel? If you actually provide your test code and somebody has already downloaded the sort classes, then maybe they will test your code against the classes. But I doubt if people will download the sort classes and create a test program just to see if they can duplicate your results (at least I know I'm not about to).

Error when adding an item to HU using FM ADD_TO_EXISTING_HU

Please I need help, could some tell me what I am doing wrong I keep an error when I try to add an item to a HU, here is the code:
FUNCTION zrf_hu_add_pack.
""Local Interface:
*" IMPORTING
*" VALUE(HU_HEADER) LIKE BAPIHUHDRPROPOSAL STRUCTURE
*" BAPIHUHDRPROPOSAL
*" VALUE(USERNAME) LIKE SY-UNAME OPTIONAL
*" VALUE(PRINTER) TYPE RSPOLNAME OPTIONAL
*" EXPORTING
*" VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
*" TABLES
*" HU_ITEMS STRUCTURE BAPIHUITMPROPOSAL
DATA: ret TYPE STANDARD TABLE OF bapiret2,
 header TYPE bapihuhdrproposal,
 hukey TYPE bapihukey-hu_exid,
 huheader TYPE bapihuheader,
 itemsproposal TYPE STANDARD TABLE OF bapihuitmproposal,
 itm TYPE STANDARD TABLE OF bapihuitem,
 item_prop TYPE huitm_prop,
 obj TYPE hum_object,
 del_type TYPE vbtyp,
 hu_ext TYPE hum_exidv_t,
 hu_int TYPE hum_venum_t,
 out_msg TYPE huitem_messages_t,
 tmp_vbeln TYPE vbeln,
 hu_hdr TYPE huhdr_proposal,
 hu_mm TYPE hum_plant_stloc,
 itm_wa LIKE LINE OF itm,
 item_prop_wa LIKE LINE OF item_prop,
 hui_wa LIKE LINE OF hu_items.
DATA: ls_handling_units TYPE hum_rehang_hu,
 ls_high TYPE vekp-venum.
DATA: it_items LIKE huitm_proposal,
 hm_obj TYPE hum_object,
 hu_prop TYPE huhdr_proposal,
 hu_add TYPE huhdr_add,
 hu_add_wa LIKE LINE OF hu_add,
 hu_items1 TYPE huitm_prop,
 hu_items_wa LIKE LINE OF hu_items1.
DATA: hu_msg TYPE huitem_messages_t,
 hu_msg_wa LIKE LINE OF hu_msg,
 hu_hdr1 TYPE hum_hu_header_t,
 hu_hdr1_wa LIKE LINE OF hu_hdr1.
DATA: i_mm_data LIKE hum_plant_stloc,
 hu_internal TYPE hum_venum_t,
 hu_external TYPE hum_exidv_t,
 handling_unit TYPE huitem_from,
 h_unit_l TYPE huitem_from,
 is_item_proposal TYPE huitm_proposal,
 i_delivery_type TYPE likp-vbtyp ,
 et_messages TYPE huitem_messages_t.
DATA: venum TYPE venum.
DATA: lt_hu LIKE bapihunumber OCCURS 0 WITH HEADER LINE,
 lt_huhdr LIKE bapihuheader OCCURS 0 WITH HEADER LINE.
DATA: t_return TYPE TABLE OF bapiret2.
get header
lt_hu-hu_exid = hu_header-hu_exid.
APPEND lt_hu.
get HU header
CALL FUNCTION 'BAPI_HU_GETLIST'
 EXPORTING
 onlykeys = ' '
 TABLES
 hunumbers = lt_hu
 huheader = lt_huhdr
 return = t_return
 EXCEPTIONS
 error_message = 2
 OTHERS = 4.
IF sy-subrc NE 0.
 CALL FUNCTION 'BALW_BAPIRETURN_GET2'
 EXPORTING
 type = sy-msgty
 cl = sy-msgid
 number = sy-msgno
 par1 = sy-msgv1
 par2 = sy-msgv2
 par3 = sy-msgv3
 par4 = sy-msgv4
 IMPORTING
 return = return.
 ROLLBACK WORK.
ELSE.
get defaults
 PERFORM get_user USING username.
handling unit
 READ TABLE lt_huhdr INDEX 1.
 APPEND hu_header-hu_exid TO hu_external.
 APPEND lt_huhdr-hu_id TO hu_internal.
 h_unit_l-exidv = lt_huhdr-hu_exid.
 h_unit_l-venum = lt_huhdr-hu_id.
APPEND h_unit_l to handling_unit.
hold delivery number
 tmp_vbeln = hu_header-pack_mat_customer.
convert or pad
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = tmp_vbeln
 IMPORTING
 output = tmp_vbeln.
set up object key
 obj-object = '01'.
 obj-objkey = tmp_vbeln.
 CONDENSE obj-objkey.
get delivery type from delivery header
 SELECT SINGLE vbtyp INTO del_type
 FROM likp
 WHERE vbeln = obj-objkey.
set status
 hu_header-hu_status_init = '1'.
 MOVE-CORRESPONDING hu_header TO hu_mm.
 hu_mm-plant = hu_header-plant.
 hu_mm-stge_loc = hu_header-stge_loc.
 hu_mm-whse_no = '101'.
 hu_mm-stge_type = '916'.
 hu_mm-stge_bin = tmp_vbeln.
set up items
 LOOP AT hu_items INTO hui_wa.
 hu_items_wa-velin = '1'.
 hu_items_wa-belnr = tmp_vbeln.
 hu_items_wa-posnr = hui_wa-lower_level_exid.
 MOVE hui_wa-pack_qty TO hu_items_wa-quantity.
 MOVE hui_wa-base_unit_qty TO hu_items_wa-meins.
 CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
 EXPORTING
 input = hui_wa-material
 IMPORTING
 output = hu_items_wa-matnr
 EXCEPTIONS
 length_error = 1
 OTHERS = 2.
 hu_items_wa-charg = hui_wa-batch.
 hu_items_wa-werks = hui_wa-plant.
 hu_items_wa-lgort = hui_wa-stge_loc.
 APPEND hu_items_wa TO hu_items1.
sort items
 SORT hu_items1 BY belnr posnr.
copy and change function ADD_TO_EXISTING_HU if neccessary
 CALL FUNCTION 'ADD_TO_EXISTING_HU'
 EXPORTING
 i_hu_id = ''
 i_hu_ref_doc = obj
 i_mm_data = hu_mm
 i_hu_internal = hu_internal
 i_hu_external = hu_external
 is_handling_unit = h_unit_l
 is_item_proposal = hu_items_wa
 i_delivery_type = del_type
 IMPORTING
 et_messages = hu_msg
 EXCEPTIONS
 not_possible = 1
 delivery_update_error = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
 CALL FUNCTION 'BALW_BAPIRETURN_GET2'
 EXPORTING
 type = sy-msgty
 cl = sy-msgid
 number = sy-msgno
 par1 = sy-msgv1
 par2 = sy-msgv2
 par3 = sy-msgv3
 par4 = sy-msgv4
 IMPORTING
 return = return.
 ROLLBACK WORK.
 ELSE.
 COMMIT WORK AND WAIT.
 ENDIF.
 ENDLOOP.
ENDIF.
ENDFUNCTION.

It probably has something to do wit the kind of HU that you are using.
If you call a " where used " of the error message HUFUNCTIONS 261 you will see that there are several checks concerning the kind of HU.
The types of HU's can be found in domain VPOBJ.
Hope this helps,
Regards,
Dirk.

Package check Error while activiating Append Structure

Hi All,
I have created an Append Structure for the Table HRP5136. When i am trying to activate the Append Structure the error "DDIC object TABL ZZHRS_EXTENDOFFER has package check errors" is thrown.
How do i resolve this? Any input on this will be of great help.
Thanks very much for your time
Regards,
Pavithra

Hi,
You r doing enhancements to the table .
when ever u do any changes u need to give the package name.
So find the package name of that table as follows.
In the tables screen itself click on system-> status .
there u will get the package name . give that name when u r activating the table.
Reward If Helpful

TableAdapter Configuration Wizard gives error when adding new TableAdapter

Hi,
I recently downloaded and installed the ODT for visual studio on my computer. I am running VS2008 on Windows 7 64-bit. I am able to create an ODP.NET connection to the Oracle XE 10.2g instance that is running on my computer with no problems and use that connection to browse the database. When I add a DataSet to my project, and start adding TableAdapters to the DataSet, I am getting errors. In an attempt to figure out what the problem is, I have followed various scenarios. I will describe each scenario, and what the end result is, and then after I have described them all, I will explain what I think the problem might be. Here are the different scenarios I have used:
Scenario 1:
From the Server Explorer, highlight ALL of the tables in my schema and drag them to the designer (all table adapters are added with no issues). I can add additional queries to each of the TableAdapters and then change the additional queries by right clicking and choosing "Configure". This all works with no issues. However, on certain TableAdapters, if I try to modify the primary query (Fill,GetData()), I can open the query editor just fine, change various settings, etc, but when I click on "Finish" I get the following error:
Configure TableAdapter TABLENAME failed.
Index was outside the bounds of the array.
Scenario 2:
From the Server Explorer, drag tables from my schema onto the designer one at a time. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to merge object(s).
Index was outside the bounds of the array.
Scenario 3:
On the Dataset Designer, add tables one at a time by right clicking and choosing "Add -> TableAdapter" and then using SQL to define the query for each table. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to add TableAdapter.
Index was outside the bounds of the array.
Ok... now that I have described all of the different scenarios, I will explain what I think the problem is, and why. Based on my research, I believe the underlying problem has to do with Foreign Key Constraints on the various tables. While working on Scenarios 2 & 3, the same exact tables worked just fine in both scenarios. When I started looking at the definitions for the tables in my schema, it turns out that all of the tables that failed had foreign key constraints defined. When I remove the FK constraints from a table, I am then able to add it to my dataset and change the default query with no problems. My original application used the System.Data.OracleClient provided by Microsoft. When adding my tableadapters using the microsoft data provider, the FK relations are automatically generated for me in the designer, but not with the Oracle Data Provider
I would be happy to provide you with the DDL that I used for creating my schema (it is not very big) if needed.
Thanks,
Jim

Sorry let me clarify some of the config a little more.
MAIL101 - Exch 2013
MAIL102 - Exch 2013
AP104 - Witness (strictly a witness nothing else on this machine)
EDGE01 - Exch 2007 Edge
CAS01 - Exch 2007 Hub/CAS load balancer for CAS02/03
CAS02 - Exch 2007 Hub/CAS
CAS03 - Exch 2007 Hub/CAS
MBOX01 - Exch 2007 Mail cluster
MBOX02 - Exch 2007 Mail cluster node
MBOX03 - Exch 2007 Mail cluster node
RDC01, RDC02, RDC03 - all 2008 R2 root domain controllers for rootdomain.rootdomain
DC01, DC02, DC03, DC04 - all 2008 R2 domain controllers for us.rootdomain.rootdomain
All DCs are Global Catalogs.
I can ping all DCs and root DCs fromboth MAIL101 and 102
The Exchange Replication service is running on both MAIL101 and 102.
DC03 is in the same site as the MAIL101/102 servers so I'll run all replication tests from here.
DCDIAG comes back with all tests passed.
repadmin /replsum comes back with 0 fails and no errors largest delta for any intersite communication is 13min.
When I run Test-ReplicationHealth -Identity MAIL101 and also 102 they both come back as everything passed. No errors.

Error when adding a disk to Cluster Shared Volumes

When adding a disk to Cluster Shared Volumes via Failover Cluster Manager, I get a couple of errors.
Event ID 5145 in System Log:
While adding the disk ('Cluster Disk 1') to Cluster Shared Volumes, setting explicit snapshot diff area association for volume ('\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\') failed with error 'HrError(0x8004230d)'. The only supported software snapshot
diff area association for Cluster Shared Volumes is to self.
Cluster disk resource 'Cluster Disk 1' failed to delete a software snapshot. The diff area on volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\' could not be dissociated from volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\'. This
may be caused by active snapshots. Cluster Shared Volumes requires that the software snapshot be located on the same disk.
Any ideas why I'm getting this error? This disk was previously added as a CSV to different Windows failover cluster, if that matters. Thanks.

Hi,
As the disk was previously used as a CSV, I assume there is still data on it.
Please check if any VSS snapshot created on that disk. If so, delete them and re-add it as a CSV to see the result - a quick way is to backup important files and perform a re-format if you cannot confirm.
If you have any feedback on our support, please send to [email protected]

Error when adding a WLC to WCS

When adding a WLC to WCS I get this error: Failed to add device to WCS Reason:
COMMON-1: Some unexpected internal error has occured. If the problem persists please report to the Tech Support.
WCS 7.0.164.0 was upgraded from 5.2.110.0 because the WLC were running 7.0.98.0
WLC4404-100 7.0.98.0 (Already in WCS)
WLC4402-12 7.0.98.0 (Changed the ip address of the management and ap manager. Was in WCS but deleted from WCS prior to the ip address change and prior to the WCS being upgraded)
I know that the snmp strings are fine and that the WLC's both respond to snmp get commands.
The intial WCS upgrade from 5.2.110.0 to 7.0.164.0 didn't require the previous version to be uninstalled. After the upgrade and restoring the WCS from backup. I was getting the error posted above. We uninstalled WCS and re-installed WCS from scratch and still we are getting the same error. We tried restarting the WCS services and also the VM box as well and not luck. I was wondering if the WCS has the old ip and mac address of the WLC4402-12 in the database and that is why i'm getting this error.
I did delete and try different snmp community strings with no luck with WCS. Again, snmp is working since I can do snmp get from the WLC's.

Scott,
This is the issue:
com.cisco.common.persistence.transaction.TransactionException: Null value was assigned to a property of primitive type setter of com.cisco.server.managedobjects.aaa.GuestUserTemplateCG.userStatus
Could be an existing bug or a new one. I cant say unless I look into your setup.

Error when adding a schema to an existing workspace

I am trying to add an existing schema to my workspace, and am getting ORA-20001: Error with: GRANT EXECUTE ON DBMS_RLS TO BILLING ORA-01031: insufficient privileges. I tried logging in as sys and granting that privilege, and it worked. However, going back to the workspace, I still did not see the new schema listed.
The user and tables have all been created in the database. The BILLING schema showed up in the available schemas to add to the workspace. I have also tried adding a new schema to the workspace. The BILLING2 schema was created, but I received the same error when it tried to add it to the workspace.
Is there a grant or user that could be missing? I am using HTMLDB 2.0.
Thanks!

These are the current privs for that user:
ALTER DATABASE
ALTER SESSION
ALTER USER
CREATE ANY CONTEXT
CREATE ANY DIRECTORY
CREATE CLUSTER
CREATE DATABASE LINK
CREATE DIMENSION
CREATE INDEXTYPE
CREATE JOB
CREATE LIBRARY
CREATE MATERIALIZED VIEW
CREATE OPERATOR
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TABLESPACE
CREATE TRIGGER
CREATE TYPE
CREATE USER
CREATE VIEW
DROP ANY DIRECTORY
DROP PUBLIC SYNONYM
DROP TABLESPACE
DROP USER
EXECUTE ANY PROCEDURE
SELECT ANY DICTIONARY
SELECT ANY TABLE
UNLIMITED TABLESPACE

Error when adding append structure

Similar Messages

Maybe you are looking for