Error when assigning business partners to positions in org. mgmt.

Hello,
I've got the following problem. I want to assign business partners to a position in organisation management. When doing this, the following error occurs:
"Object cannot be assigned to object xxx in the period xx.xx.xxxx - xx.xx.xxxx"
(xxx is the position to which the business partner should be assigned)
The number of this error message is 5A368.
Diagnosis in the detailed description of this message:
"The object period of object '1st Level Support' is not within the relationship period 26.03.2007 - 31.12.9999."
I've changed the object period of the position "1st Level Support" to several other dates, but it did not solve the problem.
The described problem does not occur, when assigning an user to this position.
Can anybody help me with this problem? I'm using SolMan 4.0.
Thank you in advance!

Thanks for your answer so far. Unfortunately it's not possible for me to upgrade to SP11. So I tried to solve the problem the way you described. I double-clicked the position on the left, the desired position is shown in the main screen and I try to assign the business partner to the position. But the same error appears.
Are there any other possible solutions?
What are the consequences of assigning users to a position instead of business partners?

Similar Messages

For an Organization unit, unable to assign Business partners in devlopment box

Dear All,
For an Organization unit, unable to assign Business partners in development-box , when i click on assign button
its navigating to organization unit only (choose relation ship)
But for production system i can assign the BP with out any issue
Can u please suggest us, do we have any settings to chose the relation ship as position...
Please find below screen image for your reference
Thanks ,
Rahul Yedapally

Vijay,
There should be some relationship attached to those BP. Select any BP for which you are getting error, go to trx BP --> Open that BP --> then go to "RELATIONSHIP" tab and check. If entries there, you can delete those realtionship and try again.
Regards
Pankaj

Error when assigning SID while uploading text in the info-object of the DSO

Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.

Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER

Hi All,
We are getting the following error when activating an ODS:
Fiscal year variant not expected
Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER
Interestingly, we have two systems for two different phases, on the same BW 3.5 SP level and the corresponding source R/3 SP Levels. BEx reporting is turned on for both the ODSs.
On one system, the ODS get's activated without any issue and on the other, it get's errored out.
I have tried different things like Rebuiding Global Transfer Settings, comparing the data between the two systems, etc., but no use.
Any ideas/solutions?
Thanks,
- Shashi

Marc,
I have checked once and found all the data is correct. I will do that again.
When I tried RSRV checks on 0FISCPER and 0FISCVARNT, I am getting the following message:
0FISCVARNT is not a characteristic but an InfoObject of type TIM
Message no. RSRV209
Diagnosis
The value entered 0FISCVARNT must be the name of a characteristic. However, 0FISCVARNT is an InfoObject of type TIM.
The following values can be types:
CHA characteristic
KYF key figure
TIM time characteristic
UNI unit
DPA package
ATR attribute
MTA meta-InfoObject
Thanks,
- Shashi

Assign Business Partners to iBase Components

Hi Experts,
I have created Solution for my Satellite systems in Solution Manager , I followed below path to Create and Assign the Component Systems as iBase .
1) DSWP> I have Selected a Solution and went to EDIT tab>Initial Data Transfer for IBase.
I got message IBASE generated Successfully.
<u>After that I am trying to Assign Business Partners to iBase Components</u>
2) T code : ib52 >Installed Ibase : 01 and I have selected component then went to Goto Tab> Partner , there
I have Function , Partner , Main Partner , Address fields
Under function I have Sold-to-party , Reported by , System Administrator functions.
Now my question is
If I select 1) Reported by function what is the corresponding partner i have to select.I have created 200 keys users.
            Like that for Sold-to-Party and System adminstartor functions what partner I have to assign.
Pls help me , i got stuck up here.
Thanks in advance
Rajani

Dear Rajani,
Normally you need to assign the following business partners to the IBASE components :
Administrator --> Person who is the administrator of the System.
Key User       --> Who is responsible for the system like an Module Lead.
Sold-to Party --> Oraganization which is responsible for the System.
So let's say in my organization Amit.inc i have the following systems :
System A --> Administrator A --> Person responsible C
System B --> Administrator B --> Person responsible D
I would have the following assignments of BP's
System A :
Administrator     --> BP for A
Key User          --> BP for C
Sold-to Party    --> BP for Amit.inc
I hope that the example is clear enough.
Regards
Amit

Cannot see a user id when assigning Business Rules to a user

User is properly provisioned in Shared Services. But cannot see her when assigning Business Rules security.
please help me with this issue.
thanks,
Ricky...

Hi,
In AAS, under HBR node, right click Administration and refresh user list.
You could also try to refresh the security from shared services.
HTH
Seb

Error when Installing Business Content BW 3.5

Hello Everyone,
When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
Message no. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.
Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Please help me to solve these problems.
Regards
Sanjiv

Hi Sanjiv,
Check the below thread:
Error when Installing Business Content BW 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
Reg
Pra

Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE

Hi Experts
When I am trying to load the data into DSO the data is scheduling But DSO data is not Activated It Showing Error
messages in Log for request processing in Request tab of DSO Manage.
1.Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE
2.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
3.Error when assigning SID: Action VAL_SID_CONVERT table ZCH_O_TYP
4.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
5.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE
6.Value '0000000000000000860452655_PDF_45U x 200' (hex. '30303030303030303030303030303030383630343532363535') of
characteristic ZVALUE contains invalid characters
7.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE_O .
8.Value '224053 sht 1.pdf##~##000000153363' (hex. '3232343035332073687420312E70646623237E232330303030') of
characteristic ZVALUE_O contains invalid characters.
9.Activation of M records from DataStore object ZCF_O02 terminated
I have tried adding the special character # with transaction rskc but nothing seems to change and
I still get the same error.
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
i am getting the above error, one of the expert suggested to implement this code but i am getting some errros when i execute this one please can anyone check this code and correct the errors it would be help ful to me.
Regards
Venu

Hi ,
Implement this code to resolve the issue.
You can use the sample code below to choose only the charachters to be allowed in for the field. Using that you can remove all special charachters and # symbols as required
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
Regards,
Rahul.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT

Hello Team,
WE are facing the error"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT" .Please see he below screen shot.
Every day the failure is for a different value and this is fixed with the manual activation of he DSO, with out any change .
Below are the steps we have tried:
1. The RSRV tests for the info objects were consistant. We have done he below rsrv tests:
a. Compare characterstic of P/Q table with X/Y tables.
b.SID values in X and Y tables.
2. We have changed the DSO setting from Parallel to Serialized Activation.
Also the format of the values are as per the designated type.
One more thing which i noticed is , the values for which the failure occurs , are new entries to the DSO, and they do no exists in the Change log table.
Please let us know , what else can be done to fix this issue.
Thanks in Advance,
Nikhil

HI Nikhil,
please go through the documents.
http://scn.sap.com/thread/1820047
http://scn.sap.com/message/14266151
http://scn.sap.com/thread/1520825
Regards,
Abdul rAwoof Syed.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER

Dear experts,
I'm getting this error when activating an DSO.
I'll try to explain when this error happens.
I have a DTP in Delta Mode between 2 DSO's.
The first time I run the DTP the DSO activates with no problems.
The next time I run the DTP and it gets data the activation of the DSO has the error: Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER
I've googled it but I can't find a solution for this.
The first time I got this error I've deleted the DSO anda loaded the Data again and got no errors.
The next Delta that has Data gave error when activating the DSO.
Whan can be happening here?
Best Regards,
Rui Romba

So you want to say that data loaded successfully in DSO 1 and while activating data in DSO2 you are getting this error.
DSO1 feed data to DSO2 correct.
Please check if generate SID upon activation setting is checked in DSO1 or not.Because if its the issue with fiscal year period then it should have given the error at DSO1 itself provided that setting is maintained.
I just stumbled upon a document which addresses this issue and it seems the problem is with fiscal year variant.
Check out the document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a5a670-13f6-2c10-179d-a35e50a208bf?quicklink=index&…
Regards,
AL
Message was edited by: Anshu Lilhori

Activating DSO: Error when assigning SID

Hi,
I am loading data from r/3 to BW via PSA till PSA the data gets populated correctly with out any errors, But from PSA to ODS I get the below Errors Can some one help me
Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT table ZPOD_DATE RSDRO
Error when assigning SID: Action VAL_SID_CONVERT table ZPO_DATE RSDRO
Activation of M records from Data Store object ZSD_O05 terminated RSM1102
Process 000106 returned with errors     RSODSO_PROCESSING     6
Process 000122 returned with errors     RSODSO_PROCESSING     6
Thanks
Abhi

Hi
Thanks fro your immediate response
But in the Error message Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces" I dont have 0DATE field in my ODS to check
Thanks
Abhi

While uploading the flat file getting Error when assigning SID

Hi ,
while uploading flat file i getting thid error .
Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER and No SID found for value '0 ' of characteristic 0CURRENCY

Hi Bijender,
This is related due to missing values in your currency tables.
If you are maintaining the currency tables from R/3 - Replicate the Currency Rates(Source sytem- Transfer Exchange Rates).
& check if the missing value is available in the TCURR table.
Thanks,
ChandraDeepak

Error When Assigning a Business System in ID

Hi,
I'm using PI 7.1. and when I'm trying to assign Business System from our SLD (menu path Business System --> Assign Business System). it throws me the following error:
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
What are the steps to debug this?
Thanks.
Prema Boodi

The problem is solved using below solution:
We should have USERS: PIDIRUSER & PIREPUSER
with Roles:
SAP_XI_ID_SERV_USER
SAP_XI_MONITOR_J2EE
And User Type must be service.
Also check the users are not locked.
And passwords for PIDIRUSER & PIREPUSER users should have same password in Local SLD & in Central SLD. (if you are maintaning more than one SLD)..

Error while assigning user to a position

Experts,
I m using SRM 3.0 with classic scenario. I would like to assign a user to a position but could not able to eventhough there is BP record. I could able to do the assignment in sandbox but not in the PRD with similar case.
Also If I use users_gen( Create users using existing SU01) it is throwing Error "central person already exists".
Please throw some input whether what could be the problem and possible solution.
Thank you,
Manyam

Hi Cordula:
I have the solution to fix your user. It is a crude methodology but it works. I have seen that error "central person already exists" many times and i have fixed it successfully.
step 1: The first step is to delete the existing assignment of the user from the org structure.
Step 2: The second step is to delete all ties of the user with his present business partner Number from transaction BP. In BP go to identification and remove his user id and save.
Step 3: Now before you use USERS_GEN to assign the user from existing SU01 ID, you would also need to delete his SU01 user ID. This is because the existing SU01 ID has ties with his previous assignment to the EBP org structure
Step 4: Recreate his user ID in SU01. System will ask you that SAP has the old office data and you can copy the data from his old office data which saves you the pain of enetring address overview tab. Go and maintain his roles and profiles section and save the user ID.
Step 5: Now you can use USERS_GEN to assign him to a organisational unit from existing SU01 id and you will see the activity to be carried out successfully !!!!:)
Please assign points if answer helpful and also confirm results and share your views with the forums.
Thanks
Sunny

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Error when assigning business partners to positions in org. mgmt.

Similar Messages

Maybe you are looking for