Error when assigning Service Team to Incident

When trying to assign a service team that I created to an incident I receive the message stating:
Diagnosis
A search help should be executed for a UI partner field with partner function category 0016. For that partner function category a
corrsponding partner function is missing in the partner determination procedure for that transaction.
Therefore the search help view could not be processed.
Procedure
You need to add a partner function with partner function category 0016
to the partner determination procedure that is assigned to the used transaction type.
I have been looking primarily at the this guide, but I don't see anything relating to that function category.  I am using SLFN0001 partner determination procedure with the changes specified in the blog.
Service Desk Implementation Guide PART I
-Jon
Edit:  Also, I am using SolMan 7.1 and I think the guide is for SolMan 7 or 7.01.  Does anyone know if there is a major difference in Service Desk config and function between the two?
Edited by: Jon Morozowski on Mar 2, 2012 5:32 PM

Hi Jon,
Please check following guides for 7.1:
Service Desk Confug Guide:
Please goto:
http://wiki.sdn.sap.com/wiki/display/SAPITSM/ConfigurationandAdminist
rationofITSM
(all in one line)
And select Configuration Guide - Application Incident Management
Security Guide:
https://websmp104.sap-ag.de/~sapidb/011000358700000482312011E.PDF
Business and Authorization Roles:
https://websmp207.sap-ag.de/~sapidb/011000358700000409432011E
Please check this and let me know if you still having an isuse.
thanks
Regards
Vikram

Similar Messages

  • Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT

    Hello Team,
    WE are facing the error"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT" .Please see he below screen shot.
    Every day the failure is for a different value and this is fixed with the manual activation of he DSO, with out any change .
    Below are the steps we have tried:
    1. The RSRV tests for the info objects were consistant. We have done he below rsrv tests:
    a. Compare characterstic of P/Q table with X/Y tables.
    b.SID values in X and Y tables.
    2. We have changed the DSO setting  from Parallel to Serialized Activation.
    Also the format of the values are as per the designated type.
    One more thing which i noticed is , the values for which the failure occurs , are new entries to the DSO, and they do no exists in the Change log table.
    Please let us know , what else can be done to fix this issue.
    Thanks in Advance,
    Nikhil

    HI Nikhil,
    please go through the documents.
    http://scn.sap.com/thread/1820047
    http://scn.sap.com/message/14266151
    http://scn.sap.com/thread/1520825
    Regards,
    Abdul rAwoof Syed.

  • Error when creating service node. [rc:special_service_error]

    Hi,
        I have updated or created Inbound Service Interface in PI ISR, but when i acitivate the SI in SPROXY, the following message raised:""Error when creating service node. [rc:special_service_error] Method: ServiceCreate; return code: 3  Exception of class CX_SRT_WSP_ICF",
       anyone can solve this issue,thanks?
    Gongtao

    Please check with your SAP Security Team if you have complete authorization/roles to generate proxies.
    See related issue on this link: Inbound Proxy Error - JDBC to PROXY Scenario
    Regards,
    Jenny

  • Error when assigning SID while uploading text in the info-object of the DSO

    Hi
    I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
    I have created the info-object which is char 60 which has the master data text activated.
    In the DSO transformation I have mapped it to the R/3 field.
    While activating the data in DSO its giving the error message
    'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
    'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
    How to overcome this issue.
    Please advise.
    Thanks in advance.

    Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
    If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
    TRANSLATE column TO UPPER CASE.
    Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

  • SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name

    Hi,
    I have created a web service in SAP ECC from a RFC.
    While configuring the web service in SOA management to publish it, getting error SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name
    How to resolve the same.
    Thanks
    Tanmay

    Hello Tanmay,
    Are you including quotes (') in the name, I assume not?
    Regards,
    Siddhesh

  • Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER

    Hi All,
    We are getting the following error when activating an ODS:
    Fiscal year variant  not expected                                           
    Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER   
    Interestingly, we have two systems for two different phases, on the same BW 3.5 SP level and the corresponding source R/3 SP Levels. BEx reporting is turned on for both the ODSs.
    On one system, the ODS get's activated without any issue and on the other, it get's errored out.
    I have tried different things like Rebuiding Global Transfer Settings, comparing the data between the two systems, etc., but no use.
    Any ideas/solutions?
    Thanks,
    - Shashi

    Marc,
    I have checked once and found all the data is correct. I will do that again.
    When I tried RSRV checks on 0FISCPER and 0FISCVARNT, I am getting the following message:
    0FISCVARNT is not a characteristic but an InfoObject of type TIM
    Message no. RSRV209
    Diagnosis
    The value entered 0FISCVARNT must be the name of a characteristic. However, 0FISCVARNT is an InfoObject of type TIM.
    The following values can be types:
    CHA characteristic
    KYF key figure
    TIM time characteristic
    UNI unit
    DPA package
    ATR attribute
    MTA meta-InfoObject
    Thanks,
    - Shashi

  • Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE

    Hi Experts
    When I am trying to load the data into DSO the data is scheduling But DSO data is not Activated It Showing Error
    messages in Log for request processing in Request tab of DSO Manage.
    1.Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE
    2.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
    3.Error when assigning SID: Action VAL_SID_CONVERT table ZCH_O_TYP
    4.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
    5.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE
    6.Value '0000000000000000860452655_PDF_45U x 200' (hex. '30303030303030303030303030303030383630343532363535') of
    characteristic ZVALUE contains invalid characters
    7.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE_O .
    8.Value '224053 sht 1.pdf##~##000000153363' (hex. '3232343035332073687420312E70646623237E232330303030') of
    characteristic ZVALUE_O contains invalid characters.
    9.Activation of M records from DataStore object ZCF_O02 terminated
    I have tried adding the special character # with transaction rskc but nothing seems to change and
    I still get the same error.
    DATA: T_ALL(100) type C,
    T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
    T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
    temp(60) type c,
    cnt type i,
    length type i.
    clear : cnt,temp,length.
    break-point.
    temp = SOURCE_FIELDS-TXZ01.
    CONCATENATE T_VAR1 T_VAR2 into T_ALL.
    cnt = 0.
    length = STRLEN( temp ).
    IF NOT temp CO T_ALL.
    WHILE cnt < length.
    IF NOT temp+cnt(1) CO T_ALL.
    CLEAR: temp+cnt(1).
    ENDIF.
    cnt = cnt + 1.
    ENDWHILE.
    ENDIF.
    translate temp to upper case.
    RESULT = temp.
    i am getting the above error, one of the expert suggested to implement this code but i am getting some errros when i execute this one please can anyone check this code and correct the errors it would be help ful to me.
    Regards
    Venu

    Hi ,
           Implement this code to resolve the issue.
    You can use the sample code below to choose only the charachters to be allowed in for the field. Using that you can remove all special charachters and # symbols as required
    DATA: T_ALL(100) type C,
    T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
    T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
    temp(60) type c,
    cnt type i,
    length type i.
    clear : cnt,temp,length.
    break-point.
    temp = SOURCE_FIELDS-TXZ01.
    CONCATENATE T_VAR1 T_VAR2 into T_ALL.
    cnt = 0.
    length = STRLEN( temp ).
    IF NOT temp CO T_ALL.
    WHILE cnt < length.
    IF NOT temp+cnt(1) CO T_ALL.
    CLEAR: temp+cnt(1).
    ENDIF.
    cnt = cnt + 1.
    ENDWHILE.
    ENDIF.
    translate temp to upper case.
    RESULT = temp.
    Regards,
    Rahul.

  • Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER

    Dear experts,
    I'm getting this error when activating an DSO.
    I'll try to explain when this error happens.
    I have a DTP in Delta Mode between 2 DSO's.
    The first time I run the DTP the DSO activates with no problems.
    The next time I run the DTP and it gets data the activation of the DSO has the error: Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER
    I've googled it but I can't find a solution for this.
    The first time I got this error I've deleted the DSO anda loaded the Data again and got no errors.
    The next Delta that has Data gave error when activating the DSO.
    Whan can be happening here?
    Best Regards,
    Rui Romba

    So you want to say that data loaded successfully in DSO 1 and while activating data in DSO2 you are getting this error.
    DSO1 feed data to DSO2 correct.
    Please check if generate SID upon activation setting is checked in DSO1 or not.Because if its the issue with fiscal year period then it should have given the error at DSO1 itself provided that setting is maintained.
    I just stumbled upon a document which addresses this issue and it seems the problem is with fiscal year variant.
    Check out the document:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a5a670-13f6-2c10-179d-a35e50a208bf?quicklink=index&…
    Regards,
    AL
    Message was edited by: Anshu Lilhori

  • Error when getting service facade : Service manager initialization failed I

    Dear Friends,
          we have created entities in CAS((nwds 7.0.1)) and deployed in J2ee.
    During Testing:
             when we right click on entity and click on test.
    service Browser. is opening with two Buttons.
    One Button it is " start with CAF source".
    when we select this its throwing error
    Error text:
    Error when getting service facade : Service manager initialization failed Illegal argument exception: Unable to create javax.ejb.EJBObject. because of this we are unable to test the entity.
    request to throw pointers to clear this error.
    Answers will be rewared.
    Regards
    shekar chandra

    even if go using this url http://hostnae:portname/caf
    i could see the main page then i click TestTools->Service browsser, Still lso i am getting the same screen with Buttons.
    one saying "Start with CAF Source" @ other "Start with ABAP
    Source"
    If .ear is one of the cause I have removed all the projects from DC->.dtr.Now my NWDS is empty.
    Still why it is comming.
    Regards
    Shekar Chandra

  • Activating DSO: Error when assigning SID

    Hi,
    I am loading data from r/3 to BW via PSA till PSA the data gets populated correctly with out any errors, But from PSA to ODS I get the below Errors Can some one help me
    Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces     
    Error when assigning SID: Action VAL_SID_CONVERT table ZPOD_DATE RSDRO
    Error when assigning SID: Action VAL_SID_CONVERT table ZPO_DATE RSDRO          
    Activation of M records from Data Store object ZSD_O05 terminated RSM1102     
    Process 000106 returned with errors     RSODSO_PROCESSING     6     
    Process 000122 returned with errors     RSODSO_PROCESSING     6     
    Thanks
    Abhi

    Hi
    Thanks fro your immediate response
    But in the Error message” Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces" I don’t have 0DATE field in my ODS to check
    Thanks
    Abhi

  • While uploading the flat file getting Error when assigning SID

    Hi ,
    while uploading flat file i getting thid error .
    Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER and No SID found for value '0 ' of characteristic 0CURRENCY

    Hi Bijender,
    This is related due to missing values in your currency tables.
    If  you are maintaining the currency tables from R/3 - Replicate the Currency Rates(Source sytem- Transfer Exchange Rates).
    & check if the missing value is available in the TCURR table.
    Thanks,
    ChandraDeepak

  • Error when closing Service Call

    Error message is occuring when trying to close / update a service call.
    'No related record found [Service Calls - Contact Person] [Message 60156-18]
    and
    'Removing activites from service call not allowed'
    Some history to the BP which may be linked
    1 business partner was created
    2 service messages and activities where created
    3.  Bp was accidently deleted
    4.  BP was reinstated
    5.  Old service messages have error when closing
    Any solutions on how to update the service call - so it can be closed?

    Hello Lisa,
    I have came across this issue before. I suggest that a messaged be logged with the SAP Support Team. They may need to get a copy of the database to verify this.
    Regards,
    Lorna Real

  • "Can not get a key" error when assigning the OAuthTokenIssuer certificate

    I am migrating from Lync Server 2010 to 2013. When deploying the 2013 server, it fails when assigning the OAuthTokenIssuer certificate. With the KeyException error below.
    I've tried "re-keying" the cert and confirmed that the key is exportable. Does anyone have any insight on how to resolve this? 
    =============
    <?xml version="1.0" encoding="UTF-8"?>
    -<CsMgmtLog Name="Set-CSCertificate">
    <Info Time="2014-04-21 19:00:53Z" Title="Connection">Data Source=servername.domain.com;Initial Catalog=xds;Integrated Security=True</Info>
    -<Action Name="Set Certificate" Time="2014-04-21 19:00:53Z">
    -<Exception Time="2014-04-21 19:00:54Z" Message="Can not get a key." Type="KeyException">
    <StackTrace Time="2014-04-21 19:00:54Z"> at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy) at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext) at Microsoft.Rtc.Management.Internal.KeyManagement.GroupKeyWrapper.Encode(Byte[]
    inBytes) at Microsoft.Rtc.Management.Deployment.Core.Certificate.SetCMSCertificate(IScopeAnchor scope, X509Certificate2 foundCert, X509Certificate2Collection certs, Nullable`1 effectiveTime, Boolean isRoll) at Microsoft.Rtc.Management.Deployment.Core.Certificate.SetCMSCertificate(IScopeAnchor
    scope, String thumbprint, Nullable`1 effectiveTime, Boolean isRoll) at Microsoft.Rtc.Management.Deployment.Tasks.SetCertificateTask.Action() at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)</StackTrace>
    </Exception>
    <Complete Time="2014-04-21 19:00:54Z"/>
    </Action>
    <Error Time="2014-04-21 19:00:54Z" Title="Error">An error occurred: "Microsoft.Incubation.Crypto.GroupKeys.KeyException" "Can not get a key."</Error>
    </CsMgmtLog>
    =============
    Regards,
    Yai

    Please try to assign the certificate with Lync Server Management Shell.
    Run the following command:
    Set-CSCertificate -Identity Global -Type OAuthTokenIssuer –Thumbprint <string>.
    Check if you can assign default certificate to Lync Front End Server.
    Check the Root Certificate Authority certificate is not expired.
    Lisa Zheng
    TechNet Community Support

  • Error when assigning  business partners to positions in org. mgmt.

    Hello,
    I've got the following problem. I want to assign business partners to a position in organisation management. When doing this, the following error occurs:
    "Object cannot be assigned to object xxx in the period xx.xx.xxxx - xx.xx.xxxx"
    (xxx is the position to which the business partner should be assigned)
    The number of this error message is 5A368.
    Diagnosis in the detailed description of this message:
    "The object period of object '1st Level Support' is not within the relationship period 26.03.2007 - 31.12.9999."
    I've changed the object period of the position "1st Level Support" to several other dates, but it did not solve the problem.
    The described problem does not occur, when assigning an user to this position.
    Can anybody help me with this problem? I'm using SolMan 4.0.
    Thank you in advance!

    Thanks for your answer so far. Unfortunately it's not possible for me to upgrade to SP11. So I tried to solve the problem the way you described. I double-clicked the position on the left, the desired position is shown in the main screen and I try to assign the business partner to the position. But the same error appears.
    Are there any other possible solutions?
    What are the consequences of assigning users to a position instead of business partners?

  • Sending Idocs to R/3 Error when Business Service with a party is configured

    Hi All,
    I'm facing some issue when posting idocs (FINSTA) back to R/3 when Business Service with a party is configured in my Integration Directory. However, I do not have this problem, if the
    Business System without Party is configured. It seems that 'adapter specific' setting doesn't
    seem to work when you have a party.
    I have read the same problem faced by other SDN members as well, some suggested to have the latest patch to solve the problem. FYI, I'm using latest patch SP 15, but the problem still exist. The error that I have in the sxmb_moni is "Unable to convert sender XI party http://sap.com/xi/XI / XIParty / GABXI100 to an IDoc partner".
    Please assist. Thanks.

    Hi Arun,
    Thanks for reply.
    What do you mean by XI Party must map to a party in the R3 in the partner profile?
    For example, If my Party Name in Integration Directory is ABC01, I should create a partner profile of ABC01 in my R3? How if I have business service under the Party ABC001, what should I configure in my R3?
    Currently My Partner Profile in R3 is type 'B' - Bank.
    Thanks for helps.

Maybe you are looking for