Error when assigning SID (details in long text) RS

Dear Friends,
while loading GL data to ODS In the last stage of load i am getting this error.cannot able to load. need urgent help i will assign points.
Sampath

Hi,
Find out the Record and package number by looking into PSA table with selection on the request number and infoobject for which you are getting the mentioned error.
To know the PSA table name , switch on technical name after you select Show Data flow option from the context menu of ODS.
Once you know the record number , you have to modify it in PSA and you need to reupload from PSA and reactivate the request.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Error when assigning SID while uploading text in the info-object of the DSO

Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.

Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER

Hi All,
We are getting the following error when activating an ODS:
Fiscal year variant not expected
Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER
Interestingly, we have two systems for two different phases, on the same BW 3.5 SP level and the corresponding source R/3 SP Levels. BEx reporting is turned on for both the ODSs.
On one system, the ODS get's activated without any issue and on the other, it get's errored out.
I have tried different things like Rebuiding Global Transfer Settings, comparing the data between the two systems, etc., but no use.
Any ideas/solutions?
Thanks,
- Shashi

Marc,
I have checked once and found all the data is correct. I will do that again.
When I tried RSRV checks on 0FISCPER and 0FISCVARNT, I am getting the following message:
0FISCVARNT is not a characteristic but an InfoObject of type TIM
Message no. RSRV209
Diagnosis
The value entered 0FISCVARNT must be the name of a characteristic. However, 0FISCVARNT is an InfoObject of type TIM.
The following values can be types:
CHA characteristic
KYF key figure
TIM time characteristic
UNI unit
DPA package
ATR attribute
MTA meta-InfoObject
Thanks,
- Shashi

Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE

Hi Experts
When I am trying to load the data into DSO the data is scheduling But DSO data is not Activated It Showing Error
messages in Log for request processing in Request tab of DSO Manage.
1.Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE
2.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
3.Error when assigning SID: Action VAL_SID_CONVERT table ZCH_O_TYP
4.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
5.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE
6.Value '0000000000000000860452655_PDF_45U x 200' (hex. '30303030303030303030303030303030383630343532363535') of
characteristic ZVALUE contains invalid characters
7.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE_O .
8.Value '224053 sht 1.pdf##~##000000153363' (hex. '3232343035332073687420312E70646623237E232330303030') of
characteristic ZVALUE_O contains invalid characters.
9.Activation of M records from DataStore object ZCF_O02 terminated
I have tried adding the special character # with transaction rskc but nothing seems to change and
I still get the same error.
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
i am getting the above error, one of the expert suggested to implement this code but i am getting some errros when i execute this one please can anyone check this code and correct the errors it would be help ful to me.
Regards
Venu

Hi ,
Implement this code to resolve the issue.
You can use the sample code below to choose only the charachters to be allowed in for the field. Using that you can remove all special charachters and # symbols as required
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
Regards,
Rahul.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT

Hello Team,
WE are facing the error"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT" .Please see he below screen shot.
Every day the failure is for a different value and this is fixed with the manual activation of he DSO, with out any change .
Below are the steps we have tried:
1. The RSRV tests for the info objects were consistant. We have done he below rsrv tests:
a. Compare characterstic of P/Q table with X/Y tables.
b.SID values in X and Y tables.
2. We have changed the DSO setting from Parallel to Serialized Activation.
Also the format of the values are as per the designated type.
One more thing which i noticed is , the values for which the failure occurs , are new entries to the DSO, and they do no exists in the Change log table.
Please let us know , what else can be done to fix this issue.
Thanks in Advance,
Nikhil

HI Nikhil,
please go through the documents.
http://scn.sap.com/thread/1820047
http://scn.sap.com/message/14266151
http://scn.sap.com/thread/1520825
Regards,
Abdul rAwoof Syed.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER

Dear experts,
I'm getting this error when activating an DSO.
I'll try to explain when this error happens.
I have a DTP in Delta Mode between 2 DSO's.
The first time I run the DTP the DSO activates with no problems.
The next time I run the DTP and it gets data the activation of the DSO has the error: Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER
I've googled it but I can't find a solution for this.
The first time I got this error I've deleted the DSO anda loaded the Data again and got no errors.
The next Delta that has Data gave error when activating the DSO.
Whan can be happening here?
Best Regards,
Rui Romba

So you want to say that data loaded successfully in DSO 1 and while activating data in DSO2 you are getting this error.
DSO1 feed data to DSO2 correct.
Please check if generate SID upon activation setting is checked in DSO1 or not.Because if its the issue with fiscal year period then it should have given the error at DSO1 itself provided that setting is maintained.
I just stumbled upon a document which addresses this issue and it seems the problem is with fiscal year variant.
Check out the document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a5a670-13f6-2c10-179d-a35e50a208bf?quicklink=index&…
Regards,
AL
Message was edited by: Anshu Lilhori

Activating DSO: Error when assigning SID

Hi,
I am loading data from r/3 to BW via PSA till PSA the data gets populated correctly with out any errors, But from PSA to ODS I get the below Errors Can some one help me
Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT table ZPOD_DATE RSDRO
Error when assigning SID: Action VAL_SID_CONVERT table ZPO_DATE RSDRO
Activation of M records from Data Store object ZSD_O05 terminated RSM1102
Process 000106 returned with errors     RSODSO_PROCESSING     6
Process 000122 returned with errors     RSODSO_PROCESSING     6
Thanks
Abhi

Hi
Thanks fro your immediate response
But in the Error message Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces" I dont have 0DATE field in my ODS to check
Thanks
Abhi

While uploading the flat file getting Error when assigning SID

Hi ,
while uploading flat file i getting thid error .
Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER and No SID found for value '0 ' of characteristic 0CURRENCY

Hi Bijender,
This is related due to missing values in your currency tables.
If you are maintaining the currency tables from R/3 - Replicate the Currency Rates(Source sytem- Transfer Exchange Rates).
& check if the missing value is available in the TCURR table.
Thanks,
ChandraDeepak

Error when assigning SID

Hello Gurus,
I have created a characteristic infoobject(ZCSHIPTYP) for Shipment type and included the same in the ODS.
When I load data, during activation it gives the foll error :-
By default, only the following standard characters are valid in characteristic values:
!"%&''()*+,-_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
./:;<=>?
Characteristic values that only consist of the character "# or that
begin with "! are not valid. If the characteristic is compounded, this
applies to each partial key.
You are trying to load the invalid characteristic value Air Cargo &
(hexidecimal representation 41697220436172676F ). This is not permitted.
this is not a master data. i have included this text in the 2lis_11_vahdr and written a user exit to populate values. the data is also coming. but during ods activation the above error occurs.
Pls guide.

MM,
No, I don't think so.
ALL_CAPITAL will allow you to use capital letters of the national codepage.
For more info look here:
Permitted characters 'ALL_CAPITAL'
Re: Special Characters in BW RSKC setting
And also OSS Notes: 173241 and 194328.
Best regards,
Eugene

Error when assigning SID: Action VAL_SID_CONVERT

Hi All,
I have an Issue with the Unicode Text.. I am trying to load data into ODS.
Able to get Data till New Data Table. The data is not getting activated due to the following error.
Value 'Шитов' (hex. '00200020042804380442043E0432') (suspect to be some Russian Characters) of characteristic XXXX contains invalid characters.This is not a master data. It is a field usually entered by the users while creating a Sales Order.
I did try maintaing characters in RSKC . I also tried All Capitals and All Captials plus Hex.
Can somebody suggest how to proceed. I did check all the previous threads .. But none of the response solved the problem,
Thanks in Advance.
Regards,
Harika

Hi,
but its not a good solution.
if there is going to be any selection variable for this object in future then system will treat small and capitals as different and users will have to specifially maintain the entries in particular case while giving input.
So you should go for it...if you are sure that you will never use it for selections or using filter values in report.
Thanks
Ajeet

Error when assingning SID in ODS

HI ,
In BI 7 ,,I inlcuded a new info object after updating the DS and IS in the first layer, second layer , third layer ODS .
I loaded data to first layer , second layer ODS and activated the data , load is successfull and I got data in the new info object included in the ODS 's . when I try to laod data from 2nd to third layer ODS I get an error in details tab
Error mesg in details tab :
Value 'DISI063 Te ' (hex. '0044004900530049003000360033002000540065 ') of characteristic 0infoobject c
Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0inofobject
Activation of M records from DataStore object XXXXXXX terminated
Process 000000 returned with errors .
I can see in ODS that in frist layer and second layer ODS , SETTINGS , SDI'S GENERATION UPON ACTIVATION is unset.
In third layer ODS SDI'S GENERATION UPON ACTIVATION is SET . I dont want to unset this in 3rd layer ODS but the problem has to be solved . Request suggest.

Hi,
Check the infoobject if it is case sensitive. Incase it is case sensitive, you need to edit the data in the PSA and upload the request again in the 1st level, 2nd level and 3rd level DSOs. You have to load from PSA again as your request is failing in the activation step. If it is failing in the DTP step, you can create an error DTP adn edit the records in the error stack( this is not your case).
It might not have failed in the below DSOs as the infoobject you are suing for the below DSOs might not have case sensitive settings as the new infoobject you are using.
Regards
Sunil

Error in assigning SID and activation of ODS

Hi all,
Iam loading delta from R/3 to BW ODS and the ODS is not getting activated and shoeing the message as " error when assigning sid ,activation of data records terminated.
This is the message :
Error geeting SID for ODS object
Value 'EXT UP CASH# ' (hex
'004500580054002000550050002000430041005300480009 ') of
characteristic 0REF_DOC_NO contains invalid ch aracters
Request: xxx
Data package: 000012
Data record: 9,431
InfoObject: 0REF_DOC_NO
Activation of data records terminated for the ODS object.
Pls help me out.
with regards,
Mohan.

What has happened is that a Invalid Character "#" has come in a record for the Value of 0REF_DOC_NO because of which the request is not getting activated.
What you will need to do is delete the request from the ODS. Go to the Request in PSA. Open the request look for the record with Invalid Character.
Modify the record by changing the value ...save..and load the request data from the PSA.

Error when assigning a BP in ppoma_crm

Hi all-
When I try to assign a Business Partner, rather than a user, to a position in the org model in ppoma_crm, I recieve this error message:
Message no. 5A719 - Caution: system could not perform all data changes
Has anyone worked through this message?
Thanks,
Nathan

Hi Raguraman
Even I have the same problem the long text is as follows
Caution: system could not perform all data changes
Message no. 5A719
Diagnosis
The required data changes consist of two parts:
1. Scheduling existing relationships
2. Creating a new relatonship
The existing releationship(s) was/were successfully scheduled, but the system could not create the new relationship.
Procedure
You can take back the data changes you made, using the undo function.
Regards
Charan

Error when assigning serial no to VA41 contract

Greetings.
I would like to capture serial number in my service contract @ VA41
But when I enter the serial number of a item and attempt to save, I am getting the following error.
<Green Light> Correct data via menu path Extras->TechnicalObject
<Red Light > No TechObj assigned to item     10
Message Text
No TechObj assigned to item     10
Technical Data
Message type__________ E (Error)
Message class_________ 00 (General Basis texts)
Message number________ 001
Message variable 1____ No TechObj assigned to item
Message variable 2____      10
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______ 2 (Level of detail 2)
Problem class_________
Sort criterion________
Number________________                                                                                1
Environment Information
Item__________________ 000
The strange thing is, I am maintaining the serial no at Extras->Technical Objects at initial entry.
Here is my procedure.
1) Enter in WV order type @ VA41
2) Enter in service material with contract duration & price (PPSV)
3) Select item goto Extras -> Technical object and enter serial no.
4) Save, then error appears.
We are on ECC 6.0. This error doesnt prevent me from saving, nor does it prevent billing or any other processing.
If anyone has any idea on how I cna make this message go away your input would be appreciated.
Regards
hanarin

Hi Abhishek,
Now, I maintained “S” in Equipment Cat through OIS2.
And, then created a serial number “1” in IQ01 as per your guidance.
After doing all this I’m able to assign serial number “1” manually in ME51N. But, "Create Serial No. Automatically" button is missing still.
I have to assign serial no’s for 100 pc, doing this manually is not possible.
I hope you can understand the situation and guide me.
Thanks With Regards,
Dinesh Kumar V.

Error when assigning SID (details in long text) RS

Similar Messages

Maybe you are looking for