Error when associating workflow with Task Content Type
Using SharePoint Designer 2010, I have created a simple workflow that sends an email out when a tasks due date has past. I created this as a Global Workflow and then tried to "Associated to Content Type", selecting "Task". I am then taken
to... COMPANY PORTAL--> Site Settings--> Site Content Types--> Task--> Add a Workflow. When I try to associate the new "Global" workflow and select OK I get the following error...
Error
Workflows may not be associated with content types whose base is on 'WorkflowTask'.
I have looked up the error but find no real explination of what it means. And I have associated global workflows with custom content types and never had this issue.
So what's going on?
Thanks
Steve
Thanks in advance for your time. Steven
Hi ,
I understand that when you bind the workflow to Tasks content type, there is an error. I can reproduce this error. This is because we cannot add a reusable workflow to a workflow tasks content type. When you add the reusable workflow to the Tasks content
type, you must have checked the ‘Add this workflow to all content types that inherit from this content type’. In this way, the workflow will be added to all the Tasks content type and workflowtasks content type. There will an error. After you close the error
message, the workflow is added to the Tasks content type.
The workaround is the check No to ‘Add this workflow to all content types that inherit from this content type’.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support
Similar Messages
-
How to publish workflows created under content type to make it available in all my-sites.
Hi,
i followed this procedure to publish workflows in my-sites but even after activating workflow feature am unable to get created workflow templates in my-site.
Create a workflow and associate it with your content type in the hub.
Before publishing this content type, export the reusable workflow and import it in all the subscriber site collections or deploy your workflow to the farm if it is a farm solution
Activate your workflow feature
Now, your workflow is available in the hub as well as all the subscriber site collections.
Publish the content type. The workflow association will be publish.
can anyone help me out of this issue.Hi,
As I understand, you encountered the issue after activating workflow feature.
Per my test, I can get the created workflow templates
after activating workflow feature by workflow 2010.
1. Check if you use SharePoint 2010 workflow because SharePoint 2013 workflow doesn’t work.
2. Reactive the workflow template feature in your site collection.
3. If it still doesn’t work, open the site collection you want to use the workflow in the SharePoint designer and associated the workflow with the content type in the site collection. After these steps, you can use workflow in your all site collection.
There is a similar thread:
https://social.technet.microsoft.com/Forums/office/en-US/714d1e48-a31d-4daa-9572-62d56c3b8c93/create-workflow-for-content-type-which-can-be-accessed-as-a-template-in-all-sites-including-mysite?forum=sharepointadmin
Best regards,
Sara Fan -
Apply workflow to approval task content type
Here's the backstory. I created an OOB Approval Workflow which created a content type called "Approval Workflow Task (en-US)". I created a new site column called Contract. I applied this site column to the Approval Workflow Task (en-US) content
type. Now I want to setup a workflow which will automatically populate this Contract field.
The problem is that in SharePoint designer I setup a list workflow to work across all items in the Task list, but it won't apply to this new content type for some reason. If I got to this content type in designer, there is not an option to apply a workflow
to it. It looks like this content type is in a group called _hidden, but when I change this, it doesn't look like anything happens.
Am I missing something?Hi Mike,
When we create a List Workflow in SharePoint Designer, then the workflow will be associated with the list and it will not be associated with the content types.
Per my test, we cannot start the workflow manually on the Tasks items which have been created based on the Approval workflow content type.
However, we can set the workflow to start automatically when an new item is created.
To start the workflow automatically when an item is created, please open the workflow in SharePoint Designer > go to the workflow settings page > select Start workflow automatically when an item is created.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Outlook error when completing workflow task.
Hi,
Outlook error when completing workflow task. I am receiving a "This task could not be completed at this time" error message in Outlook 2010 when completing a SP Approval workflow by using the "Open this Task" button
in the ribbon.
Please let me know the resolution for this issue.
Thanks & Regards,
Sasidhar KHi Sasidhar,
I'd first suggest installing any available updates on both Outlook and SharePoint sides for the issues related with Outlook integrated with SharePoint,
Also, please take a look at this thread which disscused the same issue and see if it helps. <Steve_MTC> had a good summary of his findings:
http://social.technet.microsoft.com/Forums/en-US/7a81aa4f-077b-4954-a110-7595169477e2/outlook-error-this-task-could-not-be-completed-at-this-time-when-completing-sp-approval-workflow?forum=sharepointgeneralprevious
You might also want to seek assistance in the forum of
SharePoint, other partners who read the forums regularly can share their knowledge.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Error when reassigning a custom task process
Hello!
I have an error when reassigning a custom task process.
That is what I see at the workflow history: Task assigned to xxx was delegated by xxx. Coments: xxx
However in the second line of the history an error is shown with the following information:
Event type: error
User ID: System account
Description: An error has occurred in nameofthetask
No new task is created for the user who the task was reassigned to.
Any help would be appreciatedHi,
From the error message, I
guess that you come across an OOTB Approval
Workflow.
When you define your workflow, there is a section "Enable content Approval Workflow Activities", where you can check "Update the approval status after the workflow is completed (use
this workflow to control content approval)". If you check this option, and you do not have content approval enabled on the library level, you get the system account error message. If you do not check it, everything works fine.
Or you can go to the document library settings and go to Versioning Settings Page, set "Require content approval for submitted items to?" to yes and everything should be fine.
Refer to the following blogs about the similar issue:
http://mossnwss.blogspot.com/2008/10/workflow-error-system-account-error-has.html
https://sharepointtechs.wordpress.com/2011/11/18/workflow-error-an-error-has-occurred-in-approval/
Besides, here is a similar post, you can use as a reference:
https://social.msdn.microsoft.com/Forums/en-US/fff5ee1f-904b-4a95-989f-c5a079cdf666/workflow-error-system-account-an-error-has-occured-after-workflow-completed-moss-2007?forum=sharepointcustomizationlegacy
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Error when opening document with ECL control: INVALID_DATA
Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
DavidHi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David -
What's wrong with this content type definition?
Could someone tell me what's wrong with this content type definition? When I click "New Folder" in a custom list, it should bring two fields 1) Name 2) Custom Order. However in my case when I click new folder, I see 1) Member (which is totally
weird) 2) custom order. Where is it getting that Member field from?
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<!-- Parent ContentType: Folder (0x0120) -->
<ContentType ID="0x012000c0692689cafc4191b6283f72f2369cff"
Name="Folder_OrderColumn"
Group="Custom"
Description="Folder with order column"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{35788ED2-8569-48DC-B6DE-BA72A4F87B7A}" Name="Custom_x0020_Order" DisplayName="Custom Order" />
</FieldRefs>
</ContentType>
</Elements>Hi,
According to your post, my understanding is that you had an issue about the custom content type with custom column.
I don’t think there is any issue in the content type definition, and it also worked well in my environment.
Did you have the Member field in the project?
I recommend you create a simple project only with one custom Order column and one custom Folder_OrderColumn, then you can add more fields one by one.
By doing this, it will be easier to find out the root cause of this error.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!
Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error: CONNE_IMPORT_WRONG_COMP_TYPE
Exception: CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
Jaume Saumell
Message was edited by:
Jaume SaumellHi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P -
2013 Workflows - Trigger a workflow from a Content Type
So now that a workflow cannot be triggered from a Content Type, how are people doing this now?
Any suggestions appreciated.
Thanks
J SykesHi,
According to your description, my understanding is that you want to trigger a workflow from a Content Type.
As we all know, we can attach a workflow to a Content Type, but the workflow cannot run until the Content Type is added to a list or library.
The elements of a list content type include the columns of metadata that are associated with the content type and workflows that can run on items of that content type.
More information about the content type and workflow are provided in the link below:
http://technet.microsoft.com/en-us/library/cc262735.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
ORA-04062 error when running forms with different users
ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ; -
Managed metadata columns in document information panel with multiple content types
Hi everyone,
The problem I have is that for custom content types not all managed metadata columns are displayed in Document Information Panel (DIP) for the document in the Office client application.
However, everything works fine with 1 specific content type. Even though the others using exactly the same site columns. The content types are deployed using visual studio to the content type hub, and after this the content types are correctly published to
the site collections, there are no publish issues here.
When I create a document based on the second content type in the same library, all fields are showed in the document information panel, except the managed metadata columns.
Detailed explanation:
Library: procedures
Content types:
- simple procedure (with 4 managed metadata fields and some other text fields)
- procedure with approval (with the same 4 managed metadata fields and some other text fields)
Scenario 1: I add the 'simple procedure' content type to the procedures library as only content type. Everything works fine, and all fields show correctly in the document information panel in Word.
Scenario 2: I add the 'procedure with approval' content type to the procedures library as only content type. Everything works fine, and all fields show correctly in the document information panel in Word.
Scenario 3: I add the 'simple procedure' and 'procedure with approval' content types to the document library procedures (added simple procedure first). When I create a new document based on the 'simple procedure'
content type, everything works fine and he shows all metadata fields. When I add a new document based on the 'procedure with approval' content type, the document information panel shows correctly, except all managed metadata fields. These are not visible at
all. Though they worked perfectly in scenario 1 and 2.
Is this a known issue or is there a workaround for this?
Thanks in advance!
Kind regards, DavyYes!
This problem is solved right now.
My issue was that I'm using custom content types deployed by Visual Studio in the content type hub. To create a managed metadata site column in visual studio, you need to have first of all your managed metadata field, but also a hidden field accompagnied
to make the actual mapping like the example below:
<Field ID="{B654D984-187A-471B-8738-F08F3356CFDA}"
Type="TaxonomyFieldType"
DisplayName="Countries"
ShowField="Term1033"
EnforceUniqueValues="FALSE"
Group="Demo"
StaticName="Countries"
Name="Countries">
<Customization>
<ArrayOfProperty>
<Property>
<Name>TextField</Name>;
<Value xmlns:q6="http://www.w3.org/2001/XMLSchema" p4:type="q6:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">{67308AC2-9556-456B-BF9E-43E8F23EBEE6}</Value>
</Property>
</ArrayOfProperty>
</Customization>
</Field>
<Field Type="Note"
DisplayName="Countries_0"
StaticName="CountriesTaxHTField0"
Name="CountriesTaxHTField0"
ID="{67308AC2-9556-456B-BF9E-43E8F23EBEE6}"
ShowInViewForms="FALSE"
Required="FALSE"
Hidden="TRUE"
CanToggleHidden="TRUE"
Group="Demo"
RowOrdinal="0"
/>
</Elements>
VERY important here is that when you create your content type using visual studio, you not only have to add the managed metadata site column in your xml (which let the content type work already perfectly) but also add the hidden field to your content type
xml !! This way, SharePoint knows that when you have multiple content types with the same site columns in the same library, the second content type also need to get the hidden field from this site columns like in the example below!
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<!-- Parent ContentType: Document (0x0101) -->;
<ContentType ID="0x010100571ebc0f478a49d5a775039347ee1535"
Name="Document Location"
Group="Demo"
Description="A content type containing Managed Metadata Column."
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{B654D984-187A-471B-8738-F08F3356CFDA}" Name="Countries"/>
<FieldRef ID="{67308AC2-9556-456B-BF9E-43E8F23EBEE6}" Name="CountriesTaxHTField0"/>
<FieldRef ID="{f3b0adf9-c1a2-4b02-920d-943fba4b3611}" Name="TaxCatchAll"/>
<FieldRef ID="{8f6b6dd8-9357-4019-8172-966fcd502ed2}" Name="TaxCatchAllLabel"/>
</FieldRefs>
</ContentType>
</Elements>
I'm very happy I found this solution, because in the whole project i'm implementing, this was used a lot!
Special thanks to the blog of @cann0nf0dder (http://cann0nf0dder.wordpress.com/2013/04/01/creating-a-site-column-with-managed-metadata) which let me think about this!
This ticket is answered now! :-)
Kind regards,
Davy -
No lists or libraries with InfoPath content types can be found.
I published an InfoPath form to two libraries in the site, one was a document library and one to a form library. I am using the InfoPath Web Part in the same sight and when I open the toolpane, I get the following message:
No lists or libraries with InfoPath content types can be found. Use Microsoft InfoPath
to design a form template for InfoPath Forms Services and publish it to a SharePoint library or list.
Can you help?Looks like it has been a while since this post. Hope this helps someone still facing this problem.
If you're publishing the InfoPath form as a Content Type:
Make sure that the Library (Form Templates) where the form is being published to has Content Types enabled.
Check that the Library where form is being saved upon submittal (if different from above, as it should be) has Content Types enabled.
The newly published form Content Type added the Library where forms are submitted.
If you're publishing the InfoPath form without a Content Type:
Just make sure that the Library you're publishing to is a Forms Library.
Enjoy!
Thank you in advance! -
Custom Action to the Ribbon - Not Associated to a specific Content Type?
Is it possible to create a custom action on the ribbon that ISNT associated to a specific content type?
I want to perform an action that isn't related to a list / item / lib - it should be available regardless of the context of the action I'm performing.
I have this :-
<CustomAction
Id="Steve.SharePoint.Ribbon.SSSCTab"
Location="CommandUI.Ribbon"
RegistrationType="ContentType"
RegistrationId="0x01">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.Tabs._children">
<Tab Id="Steve.SharePoint.Ribbon.SSSCTab"
Title="Custom Tab"
Description="Groups and controls will go in here"
Sequence="550">
<Scaling Id="Steve.SharePoint.Ribbon.CustomTab.Scaling">
<MaxSize...............
If I remove the RegistrationType and ID, the tab doesn't appear at all. With it set as above, the tab is available, but the controls are greyed out unless I am working within a list ....
I'd like to have it always enabled if this is possible?
Thanks
SteveRemoving those 2 should do the trick, try the following:
Remove the RegistrationType and RegistrationID. Redeploy, restart your server, and clear your browser cache through F12 Developer Tools.
Dimitri Ayrapetov (MCSE: SharePoint) -
Syntax error when creating a user-defined table type in SQL Server 2012
Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
CREATE TYPE ReportsTableType AS TABLE
( reportId INT
, questionId INT
, questionOrder INT );
Results:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'AS'.Hope these posts could help,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
Regards, Dineshkumar,
Please Mark as Answer if my post answers your question and
Vote as Helpful if it helps you -
Error when select posting level in document type
Hi,
Did anyone have an experience to face the Abab run time error when select "posting level" in document type?
The Error is : GETWA_NOT_ASSIGNED
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UC_ITKEY_FACTORY===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.If you searched the notes, as Dan proposed (and didn't find anything relevant), and the answer to the Greg's question is positive, then I would suggest regeneration data basis and ConsArea due to data model inconsistency.
If it doesn't not help - open customer message to SAP.
Edited by: Eugene Khusainov on Jan 26, 2010 10:26 AM
Maybe you are looking for
-
Can we have a Real batch process
The current batch process functionality in Audition records not keystrokes, but settings; so if you record a process using the ClickPop Eliminator functionality under Restoration, you get whatever settings you used with the sound sample you used duri
-
Creation of function module for updating the ztable
Hi, I am sending the requirement for ceation of function module for updating the ztable. Requirement---- Table Updation rule (New record) While creating a new record the calling function will export the following to the table handling function. Table
-
The import com.sapportals.htmlb cannot be resolved
Hi, I am working on EP7 and trying to create a sample application for DynPage Portal Component. After I create a new DynPage in NWDS, i get the following error: The import com.sapportals.htmlb cannot be resolved I found a link similar to this problem
-
Hi, I have these 3 tables (with right FKs and joins) in my Product Dimension: CITY, SUPPLIER, PRODUCT. The right level hierarchy should be, from top to leaves: City -> Supplier -> Product We'd want to build these dimension hierarchy: City -> Product,
-
REG hiding selection-screen comment
Hi all, Cud any one tell me how to hide a selection-screen comment.