Error when attempting to connect

hello there. whenever i try to connect to our new airport extreme 802.11n i get a strange error that consists of an 8 digit number that's different every time, and "PIN for "`¬Ä†å""
it fails to connect but keeps trying and completely freezes the airport menu for about ten minutes until it finally announces that it's completely failed with, "Please contact the network administrator about access to "`¬Ä†å". `¬Ä†å isn't the name of the network.
the light on the airport is blue and it works for someone else using it, he's using a Macbook Pro (not a core duo so no N support). the administrator isn't home at the moment but i'm getting pretty frustrated with being unable to print and scan using my printer. any ideas regarding something i could do on my end?
Macbook Intel Core 2 Duo Mac OS X (10.4.9)

OK, I see what happened. I had the 10.2 client installed with the connections configured via the tnsnames file. When I then installed the DB (with it's own tnsnames file), SQLDeveloper starting pointing to that instance of the file, with none of my tns connection entries. So, I copied the tnsnames file from the client directory to the database directory, re-created my connections, and everything was fine.

Similar Messages

There was an error when attempting to connect to the Windows Live Calendar service.

I keep getting a message when I want to check my email you are not connected (but I am,as I can get in my Webbrowser) and the following error message
There was an error when attempting to connect to the Windows Live Calendar service. If the error persists, check to see if there's an upgrade of Windows Live Mail available or contact a service representative.
Can anyone help me, no sense sending me an email, I cannot get into my email.
Lucienne1

Hi,
Try installing Windows 2012 Live Essentials here.
You will have to set up your Pop 3 or IMAP email account after installing the updated version per above.
Are you using an Internet Service Provider Email account or a cloud based (IMAP) Email account?
Pop 3 accounts will require incoming and outgoing server addresses and any additional security settings required by your ISP. If you don't have the required settings for Pop 3 you will have to contact your ISP for those.
Jaco
****I am not an HP employee****
Errare humanum est.

Getting an error when attempting to connect Skype

Hello. I am using Windows Vista 32 bit
I am attempting to connect to Skype through my microsoft account, and I am getting the following message.
"Sometimes the internet gets a bit sleepy and takes a nap. Make sure it’s up and running then we’ll give it another go."
I have checked my Internet Explorer LAN settings and have not been able to determine an issue. My IE is version 9.0.8112.16421
If there is a clue, Yahoo Messenger has also recently stopped working.
Please help!
Solved!
Go to Solution.

I just fixed this myself. I went into Internet Explorer, the went to Internet Options - Advanced - enabled 'Use TLS 1.0'

Network-related or Instance-specfic error when attempting remote connection from SSMS

Hello,
I have installed SQL Server express on a Win7 desktop and want to connect to it via SSMS on a laptop. I have set up a SQL login on the desktop so I can login, but when I try to connect to the instance from the laptop via SSMS I get the error 26 with saying
there is a network related or instance specific issue and that there is an error locating the Server/Instance specified.
I am trying to connect to a named instance on the SQL Server on the win desktop. Remote connections are enabled and TCP 1433 and UPD 1434 ports are open in Windows Firewall. Antything else I should watch for?
Thanks

Hi MrDAndersen,
According to your description, you come across the errors of pre-login handshake and wait operation timing out. Please help to post the full error log for further analysis.
Based on my research, this issue could occur when .NET Framework 4.5 and non-IFS BSP/LSP are installed on the machine, and non-IFS BSP/LSP interferes with the call to Winsock.
To work around the issue, you could use one of the two methods below.
1. Determine whether a non-IFS BSP or LSP is installed. You could use the "netsh WinSock Show Catalog" command and examine every Winsock Catalog Provider Entry item that is returned. If the 0x20000 bit is clear (not set), it is a non-IFS BSP or
LSP and remove the installed non-IFS Winsock LSPs. For more information about the process, please refer to the article:
http://support.microsoft.com/kb/2568167
2. Download and apply .NET Framework 4.5.2:
http://www.microsoft.com/en-us/download/details.aspx?id=42643
There are two connect items for your reference.
https://connect.microsoft.com/VisualStudio/feedback/details/745004/
https://connect.microsoft.com/VisualStudio/feedback/details/729323
Best regards,
Michelle Li

I have a -1202 error when attempting to connect to itunes windows xp is up to date

I have a -1202 error and can not get onto an itunes account

OK, I see what happened. I had the 10.2 client installed with the connections configured via the tnsnames file. When I then installed the DB (with it's own tnsnames file), SQLDeveloper starting pointing to that instance of the file, with none of my tns connection entries. So, I copied the tnsnames file from the client directory to the database directory, re-created my connections, and everything was fine.

Getting error when attempting to connect through infiniband interface

Hello,
I launched coherence with -Dtangosol.coherence.localhost=<infiniband address> on two machines. I get a message saying that one machine connected to the other, but no partitions are transfered. Instead I get a run time exception on my main thread. The code works fine, I tried with the ethernet address and the code ran.
I also tried the multicast test on these two machines through their respective infiniband interfaces and I got messages being transfered.
Any thoughts on something I might have missed?

Hi Armando,
Can you please post the Coherence as well as multicast test logs from both nodes as an attachment to this thread.
thanks,
mark

Unknown error when attempting to connect to my speakers via airtunes

It was working fine yesterday morning and just like that it ceased to function correctly. The airport express and the airport extreme base station are both seemingly functional. Any ideas?

Hello,
I'm having this exact same issue. Same popup. Could I get some help resolving it as well?
I am an admin on the site in question, not the owner. I updated my BC email address to match my adobe CC username/email, but it still doesn't seem to be working.
Chris Mayer
The site I'm trying to upload my muse file to is http://popsleep.businesscatalyst.com/ (it should be the only BC I have access to I believe)

I am getting an error 9808 when attempting to connect my new iphone 4S... please explain

I am getting an error 9808 when attempting to connect my new iphone 4S

Type "9808" into the search bar at the top of this page by "Support" and read the resulting help article.

WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point

I am getting the following error message while trying to configure a database for a Reporting Service Server. Both SQL Server and Reporting server are 2012 named instances. I have 2014 instances as well on the same server.
Exception details...
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running, and then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC server is not listening. (Exception from HRESULT: 0x800706B3)
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
   at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
Can someone help me on this please?

Hi Jaigi,
According to your description, you want to change a report server database for Reporting Services. But it fails on the last step and returns a error. Right?
In this scenario, it seems you are creating a report server database on another server via remote connection. Based on the error message, it has issues on executing the script for generating new database. Please check if you have permission to connect the
server and create a new database. Also please check if the Reporting Services Windows services is working properly.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Caused error -3256 when attempting to connect to external speakers.

I'm trying to connect to my Airport express using a PC running Windows XP home Edition SP 3 with iTunes 8.0.2 and getting the following error
caused error -3256 when attempting to connect to external speakers.
I've searched on teh internet and everything seems to relate to the Mac OS.
Anyone running XP had similar issues?
My AirportExpress is running FM 6.3
Thanks
Marcus

After reading this discussion thread, I've seemed to have solved the problem for myself. I'm using the Trend Micro PC-Cillin Firewall. I disabled it and the airtunes worked. So, I went into the firewall settings. There's the ability to edit the profile and add to an exceptions list. You select the executable program, select incoming or outgoing, I accepted the other default settings and it worked.

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

Keep getting sync service error when trying to connect my iphone 5S.

Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1

Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Getting "No trusted certificate found" when attempting to connect to 10g DB

Greetings,
I have an Oracle 10g DB configured to listen via TCPS. I am able to tnsping and sql+ into the DB just fine. However, when attempting to connect via SQL Developer, I get the following error:
*"Status: Failure -lo exception: sun.security.validator. ValidatorException: No trusted certificate found"*
Here is my tnsnames.ora entry:
EMCECCH01.CORPORATE.MY.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCPS)(HOST = emcecch01.corporate.my.com)(PORT = 1575))
(CONNECT_DATA =
(SERVICE_NAME = rambdb)
(SECURITY = (MY_WALLET_DIRECTORY = C:\DBSafes\Cincinnati\dbSafe))
Obviously when I create my connection, I am using 'TNS'. I've also attempted to connect via the JDBC thin driver, but when testing the connection, it just sits and spins without ever returning a result. Here is the URL I'm using:
jdbc:oracle:thin:@emcecch01.corporate.my.com:1575:rambdb
I've verified that the appropriate JAR files are in place in the jlib directory.
Any advice in this matter would be greatly appreciated.
Regards

Hi,
If your connection entry is unusual you could try these simple things that may cause variation/different code paths:
1/ORACLE_HOME being set /unset by for example a bat script before launching sqldeveloper [see in sqldeveloper help/about/properties/ oracle.home and jdbc.library to see what oracle is using]
(you could be using sqldeveloper or other oracle install jdbc)
2/Tools/preferences/database/Advanced Parameters/Use oci thick driver set/unset
(you could be using 'pure' jdbc thin or 'mixture of c & java' ie. thick oci driver using another Oracle Home or instant client)
3/use Connection type=advanced then you can enter a fancy description (these descriptions are simple but you could have load balancing for example):
thin is pure java
jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MACHINE_NAME_OR_IP)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=dev11gr1)))
oci8 is thick/c/oci-java
jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MACHINE_NAME_OR_IP)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=dev11gr1)))
(or get SQLDev to look up tnsnames.ora, connection type = tns might work)
Please post your findings and put in an enhancement request for particular connection feature support, documented with a test case.
-Turloch

Error when attempting to get processing resources: com.sap.aii.af.service.

Dear All,
i am getting below error in RWB in receiver Channel
Error
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'CONNECTION STRING: NoClassDefFoundError: sun.awt.X11GraphicsEnvironment (initialization failure)"
Note: outbound has processed succesfully in both ABAP and Java Stack.

Hi,
Can you please let us know, which receiver adapter are you using??
I guess it is JDBC: IF it is ...can you check the Driver and Connection details maintained on the channel.
JDBC Driver:com.microsoft.sqlserver.jdbc.SQLServerDriver
CONNECTION:jdbc:sqlserver://IP ADDRESS:PORT;Database=HOST NAME;
-Rahul

Sense Code 0X00023A02 error when attempting to burn RW

Hello. I am recieving this error when attempting to burn from to a DVD-RW or a DVD+RW. I know the first thing that is going to be mentioned is additional software such as on the "things to avoid" list when burning DVD's, however, I have all versions of Encore that have been produced, so I simply uninstalled 2.0 which was giving me the error code, and installed 1.5 and was able to burn a project with the same exact disc. I uninstalled no other software and did nothing else, besides rebooted, which I always do when I install and uninstall my applications. Therefore my thinking is that it is within Encore. It also with another RW in 2.0 states that it cannot erase the disc even if I do not have auto erase selected, and the disc was previously erased with Nero. I am actually sort of angry because I purchased a new burner to test out this error that I was recieving, and while I can indeed return the burner, I noticed others are being advised to check other software they have on their system. I have none of the software listed on the detrimental applications that may interfere with the burning process and I also now have (2) less than a year old burners along with a "not soo inexpensive" application that in essence does not work in a way I need it to. Yes, I can uninstall 2.0 and simply use 1.5, but I should not have to do this. And though I know this is not going to be answered by Adobe techs, please take note that the burn "Does complete without error simply by uninstalling 2.0 and installing 1.5 and creating the same exact project with the same source files". Therefore there is something within 2.0 causing these errors.
Damon

Neil and Jeff, thanks for the response. I am running a 965P chipset board and my PATA is connected via the JMicron controller, so my drive do not appear this way. It only shows the General, AutoPlay, Hardware and Sharing tabs. This is something that is an issue with this chipset from what I am being told. However, if this were the case(and god no man, no roxio installed on the system), shouldn't it be interfering with 1.5 burning the project also? This is why I am soo set it being 2.0 since 1.5 burned the project with no issue whatsoever. It's only in 2.0 that it is stating this error with the +RW or with the -RW it is stating that the disc cannot be erased. I understand completely what you all are saying, but I honestly do not believe this is the issue since one version of Encore will work and the other will not, unless something has changed in Encore 2.0. I understand that it was pretty much re-written(I was on the beta myself), but at that point, I never needed to use RW's, so I did not test with them, otherwise I would have reported it.
I cannot even get into the drive for recording via the Device Manager, so changing this option is not a possiblity. It is unfortunate that from what I have seen only one mfg makes a SATA dvd burner, and from what I have read, it isn't that great of one.
I am just at this point lost and wondering if I should simply return the burner I purchased and buy an external USB 2.0 unit and see if it works with that. What do you all think?

Error when attempting to connect

Similar Messages

Maybe you are looking for