Error when attempting to convert a PDF in Acrobat Adobe 8.1.7

Upon attempting to convert a PDF drawing/file to a TIF format, one of our users receives this error message:.
Acrobat could not save a page in this document because of the following error:
The image is too wide to output.  Please crop it or reduce resolution and try again.
The image that is being converted is a drawing and the estimator can not crop it as he must have the drawing  "as is" in order to do takeoffs on the image.  Does anyone have a solution for this?  thank you!

Yea, for some reason Acrobat will open files that are large in layout size, but can not handle the type of conversion you were requesting. The print is a way around the problem. Glad it worked.

Similar Messages

  • Problems converting PDF to MS Word document.  I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the co

    Problems converting PDF to MS Word document.  I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure.  I attempted to convert the entire document and same result.  I specifically purchased the export to Word feature.  Please assist.  I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

    Hi sdr2014,
    I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
    So, let's try this:
    If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
    Please let us know how it goes.
    Best,
    Sara

  • Please help.  Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

    Please help.  Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

    Sara,
    Please see my answers in bold below.
    What browser are you using? Try clearing the cache, or using a different browser. N/A
    Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
    Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
    Make sure the file is within the file-size limit of 100 MB. It is <40.
    I get the error message, "File failed to be converted using Adobe ExportPDF online."
    Thanks for your help in advance.

  • How Do I Resolve FileOpen Client Errors When Trying to Open a PDF in Acrobat X or Reader XI?

    I am trying to open some pdf files received from a client that when I try to open them, I receive an error stating, "The FileOpen client has encountered an error.  Please try to re-start  Adobe Acrobat / Reader."  A co-worker was able to open the same files with his version of Acrobat X Pro.  I am not having success whether I use my version of Acrobat X Standard or Acrobat Reader XI; I get the same error with both application.
    Any ideas how to resolve this.
    Thank you.
    Steve

    FileOpen is a security add-on, which is needed to open some files. Not a part of Adobe software. Maybe you need to upgrade or report it: http://www.fileopen.com/

  • When attempting to convert pdf to word doc, I continually get "An error occurred while signing in" despite the fact that I'm already signed in.  Please help if you can?

    When attempting to convert pdf to word doc, I continually get "An error occurred while signing in" despite the fact that I'm already signed in.  Please help if you can?

    Hi lorrelaws,
    Do you receive that error when you try to sign in via Reader? If so, try signing in via the web interface. Did that do the trick?
    Let us know how it goes.
    Best,
    Sara

  • Error when trying to convert excel files to pdf

    I'm getting the following error when trying to convert .xls and .xlsx files to pdf, using the "Create PDF" option:
    Error message from the primary converter:
    ALC-PDG-010-012-PDFMaker reported an error while printing the document.
    Word, Powerpoint and Text files convert without any issues. Also I'm able to opent the excel files and convert them to pdf using the acrobat option in excel.
    Livecycle Version: 10.0.2, GM
    MS Office Version: 2007
    Any help would be appreciated. Thanks in advance.
    Regards,
    Suhail N.

    It is always difficult when you need to convert multiple xls files to pdf or multiple sheets to pdf. If you have a single file to convert then the best method would be to copy your data to doc file and then convert it into PDF . If you have multiple files to convert then it is really difficult to convert all the files manually. Then the better method would be to use converter tool to convert excel to pdf . By doing this you can convert many files in just few seconds.

  • When attempting to edit a PDF doc, I get "Adobe has encountered an unknown error" Why?

    When attempting to edit a PDF doc, I get "Adobe has encountered an unknown error" Why?

    Hi myarwema,
    Are you using Acrobat on Mac OS or Windows (and what version?). You say you have version 11.0.0, but the current version is 11.0.10, so please choose Help > Check for Updates and install any available updates for starters.
    Does the error occur regardless of the PDF that you try to edit? If the problem is widespread, I would recommend a repair/reinstall of Acrobat (if installing the updates doesn't help). If the problem occurs with just the one document, that PDF could be damaged.
    Best,
    Sara

  • I'm attempting to convert a PDF but get an error message that says " an error occurred while trying to adobe createpdf online....

    I'M ATTEMPTING TO CONVERT A PDF BUT GET AN ERROR MESSAGE THAT SAYS " AN ERROR OCCURRED WHILE TRYING TO ADOBE CREATEPDF ONLINE... IT WILL NOT LET ME CONVERT .HOW DO I SOLVE THIS PROBLEM

    Hi tonigomezgalvan,
    Does it happen with other PDF as well?
    Please let me know which Browser you are using and its version.
    Have you checked with a different browser if possible?
    Regards,
    Florence

  • I receive an error when trying to convert PDF to word.  Pls help, I have a paid acct.

    I receive an error when trying to convert PDF to word.  Can someone advise on how to resolve?

    "an error" really doesn't tell us much.
    Assuming that you use the ExportPDF online service, I suggest that you Contact Customer Care - click on the Still need help? button to chat or talk with an agent.
    [topic moved to ExportPDF forum]

  • Why do I get prompted to subscribe online when I attempt to convert a PDF file to word

    Why do i get prompted to subscribe online when I attempt to convert a PDF file to word?  It's Adobe Pro XI.

    Open pdf document,  click tools,  click content editing,  click export file to (choose word).   Or open pdf document and choose save as.  Either way it prompts to subscribe.

  • I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

    I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

    I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
    I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
    I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

  • Acrobat 11.0.7 electronic signature error, "There was an error when attempting to commit this signature".

    Since updating to Acrobat 11.0.7, the electronic signature function has broken. Users receive an error message when trying to insert an electronic signature "There was an error when attempting to commit this signature. The document was not saved. The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder. The document could not be signed. HFT error. This file is already open or in use by another application."
    Error occurs even after saving the PDF locally and renaming. This issue is affecting multiple users and has never occurred in previous versions of Acrobat installed. Temporary workaround is to rollback users to Acrobat 11.0.6.

    Can you try to manually download and install the update from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5000

  • Error Message in Word  Convert To PDF Tab

    I am gettting an Error Message in Word  Convert To PDF Tab
    The pop up box comes up when I am in Word 2003 , it says "Unabkle To Find PDFresource files, you must be an adminstrator to install these files
    So I cannot create a PDF file when in Word 2003
    When I go to Acrobat  9.0 and try to create from a file , choose the word file, it says it is creating it- but nothing happens, its like it's not loading.
    I am on a PC

    Can you print to the Adobe PDF printer (I suspect you can not)? Are you logged in as the administrator? Can you find any of the job settings files? If the latter is the case, then you likely do not have permissions set to allow you to read the folder that has all the job settings. If you are not the administrator, you will have to get the administrator to find the folder (it is in one of the document and settings folders under Adobe for XP and under the Users (I think) on Win7) and grant you access.

  • Get 'Generic Error' when attempting to import .mov files with transparency?

    I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
    I have uninstalled the DVCPro Codec, but it didn't help.
    I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
    I've seen this issue on the web, but never a solution? Anyone?

    Hi Terence,
    I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
    Regards,
    Søren

  • Error when attempting to IMPORT object "TS_CHECK".

    When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
    The following short dump occurs:
    Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
    Except.                CX_SY_IMPORT_MISMATCH_ERROR
    Date and Time          19.11.2008 15:14:08
    Short text
    Error when attempting to IMPORT object "TS_CHECK".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSTD4" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
    not caught in
    procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
    by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "TS_CHECK", the component no. 4 in the
    dataset has a different type from the corresponding component
    of the target object in the program "SAPLSTD4".
    The data type is "I" in the dataset, but "N" in the program.
    Missing RAISING Clause in Interface
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     1
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Trigger Location of Exception
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     51
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Source Code Extract
    Line
    SourceCde
    21
    DATA: BEGIN OF TD110.
    22
    INCLUDE STRUCTURE TD110_STRU.
    23
    DATA: END OF TD110.
    24
    25
    CURR_TIME = SY-UZEIT.
    26
    CURR_DATE = SY-DATUM.
    27
    28
    CALL FUNCTION 'GET_DB_ORA_RELEASE'
    29
    IMPORTING
    30
    ORACLE_RELEASE = ORA_REL.
    31
    32
    IF FLAG_REFRESH = 'y'.  FLAG_REFRESH = 'Y'. ENDIF.
    33
    flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
    34
    35
    CLEAR TS_CHECK. REFRESH TS_CHECK.
    36
    CLEAR CRITOBJ. REFRESH CRITOBJ.
    37
    CLEAR NR_CRIT_OBJ.
    38
    39
    IF FLAG_REFRESH <> 'Y'.
    40
    41
    Suche zunächst im Arbeitsspeicher !
    42
    CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
    43
    IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
    44
    TS_CHECK[] = TS_CHECK_CACHE[].
    45
    CRITOBJ[] = CRITOBJ_CACHE[].
    46
    OK_1 = 'Y'.
    47
    48
    Suche danach in 'MONI' !
    49
    ELSE.
    50
    PERFORM PREPARE_MONIKEY USING 2.
    >>>>>
    IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
    52
    53
    IF SY-SUBRC = 0.
    54
    OK_1 = 'Y'.
    55
    TS_CHECK_CACHE[] = TS_CHECK[].
    56
    CRITOBJ_CACHE[] = CRITOBJ[].
    57
    ENDIF.
    58
    ENDIF.
    59
    60
    'Same procedure' für datetime:
    61
    IF NOT ( TD110_CACHE IS INITIAL ).
    62
    DATETIME-MONI_DATE = TD110_CACHE-DATUM.
    63
    DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
    64
    ELSE.
    65
    PERFORM PREPARE_MONIKEY USING 3.
    66
    IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
    67
    IF SY-SUBRC = 0.
    68
    DATETIME-MONI_DATE = TD110-DATUM.
    69
    DATETIME-MONI_TIME = TD110-UZEIT.
    70
    TD110_CACHE = TD110.
    Only related SDN post is following, but solved by changing permissions for saposcol.
    Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
    For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
    Thanks in advance for any assistance.
    KR
    Gidion

    Received the solution from SAP Active Global Support:
    This error occurs due a corruption in the table MONI.
    For solving this issue you need to clean the records of this table via the following path :
    1. Call transaction ST03
    2. With GOTO -> Performance database -> Content of database
    3. Push button Delete data group
    4. Enter ID DB
    5. Continue
    6. Confirm the delete
    If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
    Regards,
    Gidion

Maybe you are looking for