Error when attempting to merge into table with RLS - ORA - 28132
hey,
i've encountered an "ORA-28132 - Merge into syntax does not support security policies" when attempting to merge into a table with RLS defined on it.
i looked around and found this [discussion |http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:259415261270] on ask tom.
according to the thread - this was a bug in 9i. in 10g merge is possible only if the policy returns "null" and in 11g it was finally fixed.
*i have been able to merge into tables with rls in 10gR2 in some cases.*
i would like to know if anyone has some more information about this error. when can i merge into tables with RLS ?
thanks, Haki.
Never.
The bug was that it did work sometimes in 10g i.e. it should always raise an error.
It's something that I've always found a bit odd and frustrating - that MERGE and RLS policy should not be compatible.
But bottom line is that you shouldn't be using MERGE on table with RLS policy.
Edited by: Dom Brooks on Feb 14, 2011 10:51 AM
Similar Messages
-
Get 'Generic Error' when attempting to import .mov files with transparency?
I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren -
Error when attempting to merge OCS R2 and Lync 2010 Topology
Hello,
We are having an issue when trying to merge our OCS R2 and Lync 2010 deployment. The error is as follows:
TopologyXmlFileWriter::OpenReportFile IOException: Message
2014-01-22 17:15:54 INFORMATION : Executing query: "SELECT * FROM MSFT_SIPESGlobalSearchSetting"
2014-01-22 17:15:56 INFORMATION : Topology file path: ""
2014-01-22 17:15:56 INFORMATION : Executing query: "SELECT * FROM MSFT_SIPTrustedServiceSetting WHERE FQDN = "ocsaeint.domain.org""
2014-01-22 17:15:56 ERROR : Found the following error while Validating "C:\MergeTopologyInput.xml":
Cannot find media relay port for "ocsaeint.domain.org". Possible reasons include: 1. Media relay has not been activated on this edge cluster. Verify that media relay has been correctly installed on computer "ocsaeint.domain.org"
2. User might have misspelled the fully qualified domain name (FQDN) of the computer where media relay is installed. If you are using Windows PowerShell, check the user input file. It is defined in user input File as "InternalFqdn"
= "ocsaeint.domain.org" 3. User might have misspelled the fully qualified domain name (FQDN) of the computer running media relay while using Topology Builder. Verify that the user has provided the correct FQDN.
We've tried the following with no luck:
http://social.technet.microsoft.com/Forums/lync/en-US/4d32160f-cd95-43d7-8dbd-10a043fdcc14/cant-get-topology-to-merge-with-ocs-2007-r2?forum=ocsplanningdeployment
http://www.chuzpah.com/uc-corner/2011/8/5/integrating-ocs-2007-r2-with-lync-server-2010.html
Any help is appreciated!The article that you followed is to the point http://www.chuzpah.com/uc-corner/2011/8/5/integrating-ocs-2007-r2-with-lync-server-2010.html
The only thing you have to make sure is if you published your topology after making these changes.
Hire Us : http://www.datsit.in/
Get your first Lync project done absolutely free! -
Error when attempting to migrate Planning app with LCM
I get this error when I use LCM and try to migrate my app to another environment. Any ideas?
Cannot retrieve migration status for
exportArtifact(s). Nested exception is
[MESSAGE - org.xml.sax.
SAXParseException: XML document
structures must start and end within
the same entity., LCM METHOD CALL - com.
hyperion.lcm.handler.TaskHandler.
updateStatusDocument(Unknown), ROOT
CAUSE - org.apache.xerces.parsers.
DOMParser.parse(Unknown)] .I had faced this problem once when I used an export folder which had given errors during lcm export. I had ignored those errors and apparently syntax of the xml files that were extracted were not parsed successfully by importing lcm. I solved the issue by migrating everything separately (i.e. first forms, then task lists, then menus etc.)
Cheers,
Alp -
"Invalid argument" error when attempting to use Linked Table Manager
I am trying to import a text file into a linked table in Access (the linked table resides in SQL Server). I run through the import wizard which always ends with an 'Invalid Argument' error and claims the import was unsuccessful but when I query the table
all the data has been imported. How do I get this error to stop?
Any suggestion will be appreciatedSounds like something is not hooked up right, or setup right. Can you do a Compact and Repair and try again?
http://www.fmsinc.com/Microsoftaccess/compact/compact-on-close.html
http://www.databasedev.co.uk/compacting-and-repairing-ms-access.html
C & R is really done to defragment a DB, but it can 'fix' other things as well.
Also, see this.
http://www.solvexia.com/help/workingwithaccessfiles/how-to-import-data-from-text-file-to-access-table/
http://www.databasejournal.com/features/msaccess/article.php/3853531/Working-with-external-text-files-in-MS-Access.htm
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
Nouveau PDISP errors when attempting to boot into installation media
I'm attempting to install Arch onto my laptop, and I am unable to get the Arch media to even boot at all.
It's an MSI GT60-2OC, so it has UEFI, as well as an NVIDIA 770M, with Optimus.
Here's an example of the errors I'm seeing. They get spammed all the way over the screen, in different configurations.
[ 4.951444] nouveau E[ PDISP][000:01:00.0] chid 0 nthd 0x02a4 0x0000000 0x100032a4 0x00000000
The first number varies depending on time of the error, and the first three hex values are also different each time. The last value is always 0x00000000.
I can also see from a built-in light that my NVIDIA card is the one that is activated when these errors are present. Is there a way to force Arch to boot using the integrated card until I can get proper drivers up and running (if that's the issue)?
Last edited by tehsusenoh (2013-09-19 03:53:04)You're not the only one with this issue, see the last post: https://bbs.archlinux.org/viewtopic.php … 9#p1317949
-
672PCI 6723 error when attempting to generate DO signal with 20kHz sample clock
I have a piece of code that successfully worked on the PCI-6224 card, but when I tried to implement the same code on the PCI-6723 card I have run into problems.
Here is the code that I am using:
ManchConversion6723();//produces SendIt array of series of 1s/0s
// DAQmx Configure Clock
DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev3/ctr0","",DAQmx_Val_Hz,DAQmx_Val_Low,0,20000,0.5));
DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,72));
// DAQmx Configure Digital Output
DAQmxErrChk (DAQmxCreateTask("",&taskHandle));MessageBox("D");//vj
DAQmxErrChk (DAQmxCreateDOChan(taskHandle,"Dev3/port0/line0","",DAQmx_Val_ChanPerLine));MessageBox("E");//vj
DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"/Dev3/Ctr0InternalOutput",20000,DAQmx_Val_Rising,DAQmx_Val_ContSamps,72));
// DAQmx Write Code
DAQmxErrChk (DAQmxWriteDigitalLines(taskHandle,72,0,10.0,DAQmx_Val_GroupByChannel,SendIt6723,NULL,NULL));
// DAQmx Start Code
DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
DAQmxErrChk (DAQmxStartTask(taskHandle));
When I arrive at the DAQmxCfgSampClkTiming line, I receive an error stating:
DAQmx Error: Measurements: Requested value is not a supported value for this property.
PropertyAQmx_SampTimingType
You Have Requested: DAQmx_Val_SampClk
You Can Select: DAQmx_Val_OnDemand
Task Name: _unnamedTask<0>
Status Code: -200077
I believe the problem stems from the source variable of the function. I am simply tring to send the data out at the 20KHz rate.
Any help would be greatly appreciated. Thanks in advance!
Solved!
Go to Solution.Nevermind. Seems as though the PCI-6723 does not contain correlated DIO channels. In other words, sample clocks can not be tied to the DIO channels to allow for digital waveform generation. According to the AO Series User Manual, this applies to NI 6731/6733 Only. The error was trying to tell me that only a single transmit or receive channel was allowed.
For this reason, I will just stick with my PCI-6224 card.
Sorry for the confusion. -
HT204053 server error when attempting to log into icloud
I am having a problem signing into ICloud from my PC. It continues to say Can't Sign in because of Server Error. Help anyone!!!!!!
Solution 2 from this help article http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html should resolve the problem.
-
Cookies must be enabled error when attempting to login into Apps
I have the accept cookies set to from visited and also tried always. I can't log into apps on my ipad. : (
I deleted cookies and browser history. I launched Safari browsed to espn.com and randomly clicked on a few links within the site. I then launched the espn app and I was able to sign in without the cookie error.
-
Problems converting PDF to MS Word document. I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure. I attempted to convert the entire document and same result. I specifically purchased the export to Word feature. Please assist. I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.
Hi sdr2014,
I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
So, let's try this:
If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
Please let us know how it goes.
Best,
Sara -
I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!
I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!
-
Error when attempting to IMPORT object "TS_CHECK".
When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
The following short dump occurs:
Runtime Errors CONNE_IMPORT_WRONG_COMP_TYPE
Except. CX_SY_IMPORT_MISMATCH_ERROR
Date and Time 19.11.2008 15:14:08
Short text
Error when attempting to IMPORT object "TS_CHECK".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTD4" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing the object "TS_CHECK", the component no. 4 in the
dataset has a different type from the corresponding component
of the target object in the program "SAPLSTD4".
The data type is "I" in the dataset, but "N" in the program.
Missing RAISING Clause in Interface
Program SAPLSTD4
Include LSTD4U03
Row 1
Module type (FUNCTION)
Module Name DB02_ORA_FILL_TS_CHECK__CRITOB
Trigger Location of Exception
Program SAPLSTD4
Include LSTD4U03
Row 51
Module type (FUNCTION)
Module Name DB02_ORA_FILL_TS_CHECK__CRITOB
Source Code Extract
Line
SourceCde
21
DATA: BEGIN OF TD110.
22
INCLUDE STRUCTURE TD110_STRU.
23
DATA: END OF TD110.
24
25
CURR_TIME = SY-UZEIT.
26
CURR_DATE = SY-DATUM.
27
28
CALL FUNCTION 'GET_DB_ORA_RELEASE'
29
IMPORTING
30
ORACLE_RELEASE = ORA_REL.
31
32
IF FLAG_REFRESH = 'y'. FLAG_REFRESH = 'Y'. ENDIF.
33
flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
34
35
CLEAR TS_CHECK. REFRESH TS_CHECK.
36
CLEAR CRITOBJ. REFRESH CRITOBJ.
37
CLEAR NR_CRIT_OBJ.
38
39
IF FLAG_REFRESH <> 'Y'.
40
41
Suche zunächst im Arbeitsspeicher !
42
CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
43
IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
44
TS_CHECK[] = TS_CHECK_CACHE[].
45
CRITOBJ[] = CRITOBJ_CACHE[].
46
OK_1 = 'Y'.
47
48
Suche danach in 'MONI' !
49
ELSE.
50
PERFORM PREPARE_MONIKEY USING 2.
>>>>>
IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
52
53
IF SY-SUBRC = 0.
54
OK_1 = 'Y'.
55
TS_CHECK_CACHE[] = TS_CHECK[].
56
CRITOBJ_CACHE[] = CRITOBJ[].
57
ENDIF.
58
ENDIF.
59
60
'Same procedure' für datetime:
61
IF NOT ( TD110_CACHE IS INITIAL ).
62
DATETIME-MONI_DATE = TD110_CACHE-DATUM.
63
DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
64
ELSE.
65
PERFORM PREPARE_MONIKEY USING 3.
66
IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
67
IF SY-SUBRC = 0.
68
DATETIME-MONI_DATE = TD110-DATUM.
69
DATETIME-MONI_TIME = TD110-UZEIT.
70
TD110_CACHE = TD110.
Only related SDN post is following, but solved by changing permissions for saposcol.
Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
Thanks in advance for any assistance.
KR
GidionReceived the solution from SAP Active Global Support:
This error occurs due a corruption in the table MONI.
For solving this issue you need to clean the records of this table via the following path :
1. Call transaction ST03
2. With GOTO -> Performance database -> Content of database
3. Push button Delete data group
4. Enter ID DB
5. Continue
6. Confirm the delete
If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
Regards,
Gidion -
Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE
Hi Experts
When I am trying to load the data into DSO the data is scheduling But DSO data is not Activated It Showing Error
messages in Log for request processing in Request tab of DSO Manage.
1.Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE
2.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
3.Error when assigning SID: Action VAL_SID_CONVERT table ZCH_O_TYP
4.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
5.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE
6.Value '0000000000000000860452655_PDF_45U x 200' (hex. '30303030303030303030303030303030383630343532363535') of
characteristic ZVALUE contains invalid characters
7.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE_O .
8.Value '224053 sht 1.pdf##~##000000153363' (hex. '3232343035332073687420312E70646623237E232330303030') of
characteristic ZVALUE_O contains invalid characters.
9.Activation of M records from DataStore object ZCF_O02 terminated
I have tried adding the special character # with transaction rskc but nothing seems to change and
I still get the same error.
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
i am getting the above error, one of the expert suggested to implement this code but i am getting some errros when i execute this one please can anyone check this code and correct the errors it would be help ful to me.
Regards
VenuHi ,
Implement this code to resolve the issue.
You can use the sample code below to choose only the charachters to be allowed in for the field. Using that you can remove all special charachters and # symbols as required
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
Regards,
Rahul. -
Sense Code 0X00023A02 error when attempting to burn RW
Hello. I am recieving this error when attempting to burn from to a DVD-RW or a DVD+RW. I know the first thing that is going to be mentioned is additional software such as on the "things to avoid" list when burning DVD's, however, I have all versions of Encore that have been produced, so I simply uninstalled 2.0 which was giving me the error code, and installed 1.5 and was able to burn a project with the same exact disc. I uninstalled no other software and did nothing else, besides rebooted, which I always do when I install and uninstall my applications. Therefore my thinking is that it is within Encore. It also with another RW in 2.0 states that it cannot erase the disc even if I do not have auto erase selected, and the disc was previously erased with Nero. I am actually sort of angry because I purchased a new burner to test out this error that I was recieving, and while I can indeed return the burner, I noticed others are being advised to check other software they have on their system. I have none of the software listed on the detrimental applications that may interfere with the burning process and I also now have (2) less than a year old burners along with a "not soo inexpensive" application that in essence does not work in a way I need it to. Yes, I can uninstall 2.0 and simply use 1.5, but I should not have to do this. And though I know this is not going to be answered by Adobe techs, please take note that the burn "Does complete without error simply by uninstalling 2.0 and installing 1.5 and creating the same exact project with the same source files". Therefore there is something within 2.0 causing these errors.
DamonNeil and Jeff, thanks for the response. I am running a 965P chipset board and my PATA is connected via the JMicron controller, so my drive do not appear this way. It only shows the General, AutoPlay, Hardware and Sharing tabs. This is something that is an issue with this chipset from what I am being told. However, if this were the case(and god no man, no roxio installed on the system), shouldn't it be interfering with 1.5 burning the project also? This is why I am soo set it being 2.0 since 1.5 burned the project with no issue whatsoever. It's only in 2.0 that it is stating this error with the +RW or with the -RW it is stating that the disc cannot be erased. I understand completely what you all are saying, but I honestly do not believe this is the issue since one version of Encore will work and the other will not, unless something has changed in Encore 2.0. I understand that it was pretty much re-written(I was on the beta myself), but at that point, I never needed to use RW's, so I did not test with them, otherwise I would have reported it.
I cannot even get into the drive for recording via the Device Manager, so changing this option is not a possiblity. It is unfortunate that from what I have seen only one mfg makes a SATA dvd burner, and from what I have read, it isn't that great of one.
I am just at this point lost and wondering if I should simply return the burner I purchased and buy an external USB 2.0 unit and see if it works with that. What do you all think? -
How can I load data into table with SQL*LOADER
how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961
Maybe you are looking for
-
I have paid apps on my ipad and if I update my software to iOS5 I will lose all my apps. Surely, there is a way to restore the itunes account that I lost when my pc crashed. I really don't want to lose all my apps and start from scratch. Does itune
-
Hi, DB Version:10g R2 OS:LINUX We have configured the physical standby database and it was running as expected, but due to some un know reasons one of the archivelog at primary side has been deleted and it is no longer available to be transferred and
-
How to preload using AS 3.0?
Hi! I am using ActionScript 3.0 with Flash 9. I have asked this in many diferent places without any answer yet.Hopefully I will get my ansewers here. I have this code to preload external swf files : var request:URLRequest = new URLRequest("content.sw
-
Screen turns blue when moving the screen up and down
Hi, I work on my laptop everyday and I move the screen in diffent angles for me to see the screen better from where I am sitting, but recently the screen turns completely blue. I can still see everything but all the white colors turn light blue. The
-
Calculate and analyse variances for PM orders
Dear all, How the Costs and activity planning can be done for all PM orders and Calculate and analyse variances on periodical basis?? Thanks and regards