Error when attempting to merge OCS R2 and Lync 2010 Topology

Hello,
We are having an issue when trying to merge our OCS R2 and Lync 2010 deployment. The error is as follows:
TopologyXmlFileWriter::OpenReportFile IOException: Message
2014-01-22 17:15:54 INFORMATION : Executing query: "SELECT * FROM MSFT_SIPESGlobalSearchSetting"
2014-01-22 17:15:56 INFORMATION : Topology file path: ""
2014-01-22 17:15:56 INFORMATION : Executing query: "SELECT * FROM MSFT_SIPTrustedServiceSetting WHERE FQDN = "ocsaeint.domain.org""
2014-01-22 17:15:56 ERROR : Found the following error while Validating "C:\MergeTopologyInput.xml":
Cannot find media relay port for "ocsaeint.domain.org". Possible reasons include: 1. Media relay has not been activated on this edge cluster. Verify that media relay has been correctly installed on computer "ocsaeint.domain.org"
2. User might have misspelled the fully qualified domain name (FQDN) of the computer where media relay is installed. If you are using Windows PowerShell, check the user input file. It is defined in user input File as "InternalFqdn"
= "ocsaeint.domain.org" 3. User might have misspelled the fully qualified domain name (FQDN) of the computer running media relay while using Topology Builder. Verify that the user has provided the correct FQDN.
We've tried the following with no luck:
http://social.technet.microsoft.com/Forums/lync/en-US/4d32160f-cd95-43d7-8dbd-10a043fdcc14/cant-get-topology-to-merge-with-ocs-2007-r2?forum=ocsplanningdeployment
http://www.chuzpah.com/uc-corner/2011/8/5/integrating-ocs-2007-r2-with-lync-server-2010.html
Any help is appreciated!

The article that you followed is to the point http://www.chuzpah.com/uc-corner/2011/8/5/integrating-ocs-2007-r2-with-lync-server-2010.html
The only thing you have to make sure is if you published your topology after making these changes.
Hire Us : http://www.datsit.in/
Get your first Lync project done absolutely free!

Similar Messages

I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?

I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?
David

This is a duplicate thread - see here

Error when attempting to merge into table with RLS - ORA - 28132

hey,
i've encountered an "ORA-28132 - Merge into syntax does not support security policies" when attempting to merge into a table with RLS defined on it.
i looked around and found this [discussion |http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:259415261270] on ask tom.
according to the thread - this was a bug in 9i. in 10g merge is possible only if the policy returns "null" and in 11g it was finally fixed.
*i have been able to merge into tables with rls in 10gR2 in some cases.*
i would like to know if anyone has some more information about this error. when can i merge into tables with RLS ?
thanks, Haki.

Never.
The bug was that it did work sometimes in 10g i.e. it should always raise an error.
It's something that I've always found a bit odd and frustrating - that MERGE and RLS policy should not be compatible.
But bottom line is that you shouldn't be using MERGE on table with RLS policy.
Edited by: Dom Brooks on Feb 14, 2011 10:51 AM

ICloud Control Panel errors when attempting to set up contacts and calanders

I have connected my mail with the Control Panel, but had to edit the settings through outlook to get the mailbox to sync, send and receive mail.
When i attempt to then sync contacts and calanders with Outlook 2010, it will download all of my information and then error
This error reads "Your setup couldn't be started because of an unexpected error".
Can anyone help?

Thanks for the reply. I have a binding established in the 'wait for event' step. The step proceeds correctly when the event happens, so I belive that the binding is correct. The problem happens when the process control step in the 'latest end' outcome of the 'wait for event' step attempts to set the work item to obsolete. Which event container bindings does the process control need in order to set the work item to obsolete?
Thanks,
Chris.

Errors when attempt to execute task 'Approve and Deploy to Product'

Hello all,
I updated the pricelists from BCC, an error occurred when I attempted to execute task 'Approve and Deploy to Production', it shows ‘atg.epub.workflow.process.WorkflowProcessResources->invalidTargetName : There is no target with the given name Production.’
Here is the ATGPublishing server error log:
atg.process.action.ActionException: atg.epub.workflow.process.WorkflowProcessResources->invalidTargetName : There is no target with the given name Production.
Can anyone tell me how to resolve this error. Thank you in advance.

Check this in your production BCC component browser.
/dyn/admin/nucleus/atg/epub/workflow/process/WorkflowProcessManager/?action=seedefinition&process=/Commerce/editCommerceAssets.wdl
Search for approveAndDeployProject, you will find the target. Make sure its correct and same String value is used in BCC when creating sites.
And make
atg/epub/Configuration.properties
queryWorkflowTargetByID=false
Otherwise send me the contents from dyn/admin
Peace
Shaik

Topology Merge Failing between OCS 2007 and Lync 2010

A brief about the issue. I read
http://technet.microsoft.com/en-us/library/gg412949.aspx which tells to run
Set-CsSipDomain -Identity fabrikam.com -IsDefault $True to make additional domain as default domain.
Want to know the exact procedures before I need to follow without affecting the existing set up before merging the topology again.
We have OCS 2007 in production where abc.company.com is primary sip domain and company.com is additional sip domain.
Recently installed Lync 2010 with primary sip domain as company.com and abc.company.com as additional sip domain.
Tried to merge both the topology after installing CU and OCS backward compatibility tool on Lync 2010 and it ended up with below error.
System.Management.Automation.CmdletInvocationException: The value of default domain in “Office Communications Server 2007” / “Office Communications Server 2007 R2” is “abc.company.com”. The value of default domain in Lync Server 2010
is “Company.com”. These values need to be equal before you continue merging the topology.

Run on the Lync Front End
Set-CsSipDomain -Identity abc.company.com -IsDefault $True
This won't impact any existing users on Lync tied to company.com sip address space.
Then launch the Lync Topology builder again, you should see the updated default SIP domain.
Run the OCS Merge again, after decommissioning OCS switch the primary domain back to company.com (if you switch the sip domain prior to decommission and need to run merge again, you'll have to set-cssipdomain)
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator (BETA) - Used to assist in the validation and documentation of Lync Server 2013.

It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

how do i fix this. It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

Have a look at this thread.
Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."

Lightroom encountered an error when reading from its preview cache and needs to quit. Says Lightromm will attempt to fix the problem the next time it launches, but on every re-launch I get the same message. Any clue as to how to fix this problem?

I recently updated my HP laptop's OS from WIndows8 to WIndows8.1. When I went attempted to open Lightroom5 I got the following message:
"Lightroom encountered an error when reading from its preview cache and needs to quit. "
"Lightroom will attempt to fix the problem the next time it launches"
Every time I relaunch I get the same message. I'd like to understand what might be causing the problem so I can remedy and get back to my photo editing. Any clue as to how to fix this problem would be greatly appreciated.
JPM

reset your preferences, Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums

Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."

Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."Help
Please

Stan Blumberg wrote:
I have deleted the file but the message persists even after restarting the computer....any advice??...I am using LR 5
You don't delete a file, you have to delete a folder. Is that what you did?
If you deleted the folder specified above, and you still get the message, then it's the wrong folder. Use your operating system's search function and find ALL folders on ALL disks whose name ends with Previews.LRDATA, delete each one found, and then try opening Lightroom.

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the proble

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened

https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem.

When I tried to open Lightroom 5.4 today I got a msg that says "Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it lauches". What do I do? I get the msg each ti

"Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it lauches". What do I do? I get the msg each time I try to open it.

It isn't a file, it's a folder. It will have the same name as your catalog, but will have the extension data. It will be in the same folder along with your catalog. If you need to use the search feature to search for *.lrdata.

Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem next time it launches. " But it doesn't fix it!

I get the following window on loading Lightroom 5.7 -
Lightroom encountered an error when reading from its preview cache and needs to quit.
Lightroom will attempt to fix this problem next time it launches.
I have tried several restarts, without success. Also reinstalled Lightroom; no joy
Any suggestions?

Using your system browser (Windows Explorer or Finder), open the folder that contains your catalog. In Windows it is in your pictures folder and then in a Lightroom folder. Inside of the Lightroom folder you will find another folder that has the extension .lrdata. It will have the same name as your catalog except for the extension. You need to delete that folder, and then start Lightroom again. Lightroom will generate a new previews folder, and you should be back in business.

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

Problems converting PDF to MS Word document. I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the co

Problems converting PDF to MS Word document. I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure. I attempted to convert the entire document and same result. I specifically purchased the export to Word feature. Please assist. I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

Hi sdr2014,
I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
So, let's try this:
If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
Please let us know how it goes.
Best,
Sara

I get a runtime error when attempting to search the store in Itunes. I unistalled and reloaded. How can I fix this?

I just began getting a runtime error when attempting to search the iTunes store.
I uninstalled and reinstalled but, it's still happening.
How can I fix this so I can start to buy music again?

I have the same error, but I think we will get no solution for this problem.
You've get no answer here and the Apple support also doesn't send an answer how to solve the problem.
BTW I have also Windows 7 and the newest version of iTunes 64-bit.
Greetings Mike

Error when attempting to merge OCS R2 and Lync 2010 Topology

Similar Messages

Maybe you are looking for