Error when attempting to migrate Planning app with LCM

I get this error when I use LCM and try to migrate my app to another environment. Any ideas?
Cannot retrieve migration status for
exportArtifact(s). Nested exception is
[MESSAGE - org.xml.sax.
SAXParseException: XML document
structures must start and end within
the same entity., LCM METHOD CALL - com.
hyperion.lcm.handler.TaskHandler.
updateStatusDocument(Unknown), ROOT
CAUSE - org.apache.xerces.parsers.
DOMParser.parse(Unknown)] .

I had faced this problem once when I used an export folder which had given errors during lcm export. I had ignored those errors and apparently syntax of the xml files that were extracted were not parsed successfully by importing lcm. I solved the issue by migrating everything separately (i.e. first forms, then task lists, then menus etc.)
Cheers,
Alp

Similar Messages

  • Get 'Generic Error' when attempting to import .mov files with transparency?

    I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
    I have uninstalled the DVCPro Codec, but it didn't help.
    I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
    I've seen this issue on the web, but never a solution? Anyone?

    Hi Terence,
    I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
    Regards,
    Søren

  • Error when attempting to merge into table with RLS - ORA - 28132

    hey,
    i've encountered an "ORA-28132 - Merge into syntax does not support security policies" when attempting to merge into a table with RLS defined on it.
    i looked around and found this [discussion |http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:259415261270] on ask tom.
    according to the thread - this was a bug in 9i. in 10g merge is possible only if the policy returns "null" and in 11g it was finally fixed.
    *i have been able to merge into tables with rls in 10gR2 in some cases.*
    i would like to know if anyone has some more information about this error. when can i merge into tables with RLS ?
    thanks, Haki.

    Never.
    The bug was that it did work sometimes in 10g i.e. it should always raise an error.
    It's something that I've always found a bit odd and frustrating - that MERGE and RLS policy should not be compatible.
    But bottom line is that you shouldn't be using MERGE on table with RLS policy.
    Edited by: Dom Brooks on Feb 14, 2011 10:51 AM

  • 672PCI 6723 error when attempting to generate DO signal with 20kHz sample clock

    I have a piece of code that successfully worked on the PCI-6224 card, but when I tried to implement the same code on the PCI-6723 card I have run into problems.
    Here is the code that I am using:
    ManchConversion6723();//produces SendIt array of series of 1s/0s
    // DAQmx Configure Clock
    DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
    DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev3/ctr0","",DAQmx_Val_Hz,DAQmx_Val_Low,0,20000,0.5));
    DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,72));
    // DAQmx Configure Digital Output
    DAQmxErrChk (DAQmxCreateTask("",&taskHandle));MessageBox("D");//vj
    DAQmxErrChk (DAQmxCreateDOChan(taskHandle,"Dev3/port0/line0","",DAQmx_Val_ChanPerLine));MessageBox("E");//vj
    DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"/Dev3/Ctr0InternalOutput",20000,DAQmx_Val_Rising,DAQmx_Val_ContSamps,72));
    // DAQmx Write Code
    DAQmxErrChk (DAQmxWriteDigitalLines(taskHandle,72,0,10.0,DAQmx_Val_GroupByChannel,SendIt6723,NULL,NULL));
    // DAQmx Start Code
    DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
    DAQmxErrChk (DAQmxStartTask(taskHandle));
    When I arrive at the DAQmxCfgSampClkTiming line, I receive an error stating:
    DAQmx Error: Measurements: Requested value is not a supported value for this property.
    PropertyAQmx_SampTimingType
    You Have Requested: DAQmx_Val_SampClk
    You Can Select: DAQmx_Val_OnDemand
    Task Name: _unnamedTask<0>
    Status Code: -200077
     I believe the problem stems from the source variable of the function. I am simply tring to send the data out at the 20KHz rate.
    Any help would be greatly appreciated. Thanks in advance!
    Solved!
    Go to Solution.

    Nevermind. Seems as though the PCI-6723 does not contain correlated DIO channels. In other words, sample clocks can not be tied to the DIO channels to allow for digital waveform generation. According to the AO Series User Manual, this applies to NI 6731/6733 Only. The error was trying to tell me that only a single transmit or receive channel was allowed.
    For this reason, I will just stick with my PCI-6224 card. 
    Sorry for the confusion.

  • Cookies must be enabled error when attempting to login into Apps

    I have the accept cookies set to from visited and also tried always.  I can't log into apps on my ipad.  : (

    I deleted cookies and browser history.  I launched Safari browsed to espn.com and randomly clicked on a few links within the site.  I then launched the espn app and I was able to sign in without the cookie error. 

  • Problems converting PDF to MS Word document.  I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the co

    Problems converting PDF to MS Word document.  I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure.  I attempted to convert the entire document and same result.  I specifically purchased the export to Word feature.  Please assist.  I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

    Hi sdr2014,
    I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
    So, let's try this:
    If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
    Please let us know how it goes.
    Best,
    Sara

  • When attempting to buy an app, iam asked to update my security questions. When I submit these I get an error message saying unable to save data.

    When attempting to buy an app, I am asked to update my security questions. When I submit theses I get an error message saying unable to save data.

    Hi,
    Go here:
    https://appleid.apple.com/
    Then click on "Manage my Apple ID" so you can update these security questions and ensure all your data is up to date. Including rescue emails.
    Regards,
    C

  • Recd following error when attempt to open ebook using ADE 4.0  : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5  Chrome Version 37.0.2062.124

    recd following error when attempt to open ebook using ADE 4.0  : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5  Chrome Version 37.0.2062.124
    chat with customer service at book company i purchased file:
    "Me: I installed the proper adobe software, adobe digital editions 3.0 (now have updated to 4.0) on my mac running os 10.85 however I am getting the following error code when i try to open the file:
    "Error getting License. License Server Communication Problem:
    E_LIC_LICENSE_SIGN_ERROR"
    Charles P.: Okay, what you need to do unfortunately, is contact Adobe at  http://www.adobe.com and they will need to get your license issue resolved.
    Charles P.: Is there anything else I can assist you with today?
    Me: title of error is    Unable to Download
    Me: i dont see how that would be an adobe problem?
    Charles P.: I understand, but it appears that the reason for the download issue is because of the license error the license is related to the Adobe Digital editions software. I understand how this could be confusing but it's due to the authorization of the ADE software. Adobe would need to correct your account issue with the license
    Me: ok but i thought this was a free license from adobe??!!  this is just a digital editions reader, right??
    Charles P.: That is correct it is a free license but your account has to be associated with one license and yes the Digital edition is a ebook reader that our ebooks use for you to view

    Well, just for the halibut I tried opening the book again today and , GLORY BE!,  it worked.
    Guess it may have taken overnight for Adobe to OK my license to their free ADE software. Also works now using Bluefire app as the reader on my android phone, although it was a pain
    to get the book file in the right file folder for bluefire to see it.
    I hope that time also heels the issue with all other Error Getting License users.
    panman

  • Error when attempting to IMPORT object "TS_CHECK".

    When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
    The following short dump occurs:
    Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
    Except.                CX_SY_IMPORT_MISMATCH_ERROR
    Date and Time          19.11.2008 15:14:08
    Short text
    Error when attempting to IMPORT object "TS_CHECK".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSTD4" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
    not caught in
    procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
    by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "TS_CHECK", the component no. 4 in the
    dataset has a different type from the corresponding component
    of the target object in the program "SAPLSTD4".
    The data type is "I" in the dataset, but "N" in the program.
    Missing RAISING Clause in Interface
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     1
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Trigger Location of Exception
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     51
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Source Code Extract
    Line
    SourceCde
    21
    DATA: BEGIN OF TD110.
    22
    INCLUDE STRUCTURE TD110_STRU.
    23
    DATA: END OF TD110.
    24
    25
    CURR_TIME = SY-UZEIT.
    26
    CURR_DATE = SY-DATUM.
    27
    28
    CALL FUNCTION 'GET_DB_ORA_RELEASE'
    29
    IMPORTING
    30
    ORACLE_RELEASE = ORA_REL.
    31
    32
    IF FLAG_REFRESH = 'y'.  FLAG_REFRESH = 'Y'. ENDIF.
    33
    flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
    34
    35
    CLEAR TS_CHECK. REFRESH TS_CHECK.
    36
    CLEAR CRITOBJ. REFRESH CRITOBJ.
    37
    CLEAR NR_CRIT_OBJ.
    38
    39
    IF FLAG_REFRESH <> 'Y'.
    40
    41
    Suche zunächst im Arbeitsspeicher !
    42
    CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
    43
    IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
    44
    TS_CHECK[] = TS_CHECK_CACHE[].
    45
    CRITOBJ[] = CRITOBJ_CACHE[].
    46
    OK_1 = 'Y'.
    47
    48
    Suche danach in 'MONI' !
    49
    ELSE.
    50
    PERFORM PREPARE_MONIKEY USING 2.
    >>>>>
    IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
    52
    53
    IF SY-SUBRC = 0.
    54
    OK_1 = 'Y'.
    55
    TS_CHECK_CACHE[] = TS_CHECK[].
    56
    CRITOBJ_CACHE[] = CRITOBJ[].
    57
    ENDIF.
    58
    ENDIF.
    59
    60
    'Same procedure' für datetime:
    61
    IF NOT ( TD110_CACHE IS INITIAL ).
    62
    DATETIME-MONI_DATE = TD110_CACHE-DATUM.
    63
    DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
    64
    ELSE.
    65
    PERFORM PREPARE_MONIKEY USING 3.
    66
    IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
    67
    IF SY-SUBRC = 0.
    68
    DATETIME-MONI_DATE = TD110-DATUM.
    69
    DATETIME-MONI_TIME = TD110-UZEIT.
    70
    TD110_CACHE = TD110.
    Only related SDN post is following, but solved by changing permissions for saposcol.
    Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
    For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
    Thanks in advance for any assistance.
    KR
    Gidion

    Received the solution from SAP Active Global Support:
    This error occurs due a corruption in the table MONI.
    For solving this issue you need to clean the records of this table via the following path :
    1. Call transaction ST03
    2. With GOTO -> Performance database -> Content of database
    3. Push button Delete data group
    4. Enter ID DB
    5. Continue
    6. Confirm the delete
    If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
    Regards,
    Gidion

  • Acrobat 11.0.7 electronic signature error, "There was an error when attempting to commit this signature".

    Since updating to Acrobat 11.0.7, the electronic signature function has broken. Users receive an error message when trying to insert an electronic signature "There was an error when attempting to commit this signature. The document was not saved. The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder. The document could not be signed. HFT error. This file is already open or in use by another application."
    Error occurs even after saving the PDF locally and renaming. This issue is affecting multiple users and has never occurred in previous versions of Acrobat installed. Temporary workaround is to rollback users to Acrobat 11.0.6.

    Can you try to manually download and install the update from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5000

  • Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

    I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
    Here's the error log of OMWB:
    ** Oracle Migration Workbench
    ** Production
    ** ( Build 20050629 )
    ** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
    ** user language: es
    ** user region: null
    ** user timezone:
    ** file encoding: Cp1252
    ** java version: 1.4.2_04
    ** java vendor: Sun Microsystems Inc.
    ** o.s. arch: x86
    ** o.s. name: Windows 2000
    ** o.s. version: 5.0
    ** Classpath:
    ..\lib\boot.jar
    ** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
    ** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.6.0.0 - Production
    Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
    ** The following plugins are installed:
    ** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
    ** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
    ** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
    ** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
    ** Active Plugin : SQLServer2K
    EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
    ** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007

    Duplicate thread
    Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

  • Error when attempting to IMPORT object TLINE

    Hi Experts,
    I am trying to read a standard text in my webdynpro abap application using FM READ_TEXT but I keep getting this error Error when attempting to IMPORT object "TLINE". It was working fine before we recently migrated to a unicode enviornment.
    This is where its crashing
    FORM read_textlines
    if rt_header-tdtexttype is initial.              "SAPscript format
      import tline to rt_lines   
    from database stxl(tx)
    Thanks in advance.

    Found my answer. I had a data type conflict when  using FM read_text.

  • Sense Code 0X00023A02 error when attempting to burn RW

    Hello. I am recieving this error when attempting to burn from to a DVD-RW or a DVD+RW. I know the first thing that is going to be mentioned is additional software such as on the "things to avoid" list when burning DVD's, however, I have all versions of Encore that have been produced, so I simply uninstalled 2.0 which was giving me the error code, and installed 1.5 and was able to burn a project with the same exact disc. I uninstalled no other software and did nothing else, besides rebooted, which I always do when I install and uninstall my applications. Therefore my thinking is that it is within Encore. It also with another RW in 2.0 states that it cannot erase the disc even if I do not have auto erase selected, and the disc was previously erased with Nero. I am actually sort of angry because I purchased a new burner to test out this error that I was recieving, and while I can indeed return the burner, I noticed others are being advised to check other software they have on their system. I have none of the software listed on the detrimental applications that may interfere with the burning process and I also now have (2) less than a year old burners along with a "not soo inexpensive" application that in essence does not work in a way I need it to. Yes, I can uninstall 2.0 and simply use 1.5, but I should not have to do this. And though I know this is not going to be answered by Adobe techs, please take note that the burn "Does complete without error simply by uninstalling 2.0 and installing 1.5 and creating the same exact project with the same source files". Therefore there is something within 2.0 causing these errors.
    Damon

    Neil and Jeff, thanks for the response. I am running a 965P chipset board and my PATA is connected via the JMicron controller, so my drive do not appear this way. It only shows the General, AutoPlay, Hardware and Sharing tabs. This is something that is an issue with this chipset from what I am being told. However, if this were the case(and god no man, no roxio installed on the system), shouldn't it be interfering with 1.5 burning the project also? This is why I am soo set it being 2.0 since 1.5 burned the project with no issue whatsoever. It's only in 2.0 that it is stating this error with the +RW or with the -RW it is stating that the disc cannot be erased. I understand completely what you all are saying, but I honestly do not believe this is the issue since one version of Encore will work and the other will not, unless something has changed in Encore 2.0. I understand that it was pretty much re-written(I was on the beta myself), but at that point, I never needed to use RW's, so I did not test with them, otherwise I would have reported it.
    I cannot even get into the drive for recording via the Device Manager, so changing this option is not a possiblity. It is unfortunate that from what I have seen only one mfg makes a SATA dvd burner, and from what I have read, it isn't that great of one.
    I am just at this point lost and wondering if I should simply return the burner I purchased and buy an external USB 2.0 unit and see if it works with that. What do you all think?

  • Help: An error when I initial the planning areas:internal error

    Hi,
      An error when I initial the planning areas, I create time series objects for planning area DP01, system show an error message to me as follow:
      internal error [/SAPAPO/OM_TS_TGRID_CREATE]
      Message no. /SAPAPO/TSM099
    Thanks,
      Thomson

    Hi Thomson,
    I think in planning area you did not only add the time series key figures
    to the planning area but also defined key figure semantics for those
    key figures. This must not be. To see those semantics you can check
    the key figure details in transaction /SAPAPO/MSDP_ADMIN on the
    key figure tab by selecting key figure details. For the time series
    keyfigures, the semantics column is filled with values like 300, 301,
    etc. If you wants to use time series key figures in addition
    to the standard SNP-key figures, the semantics field has to be empty.
    You can compare that with the settings in the other planning area where
    everything is working fine.
    If this is not the case then please refer the below note and execute the consistency reports as in note:
    577038     Data inconsistencies in SNP
    Regards,
    Sunitha.

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

Maybe you are looking for