Error when attempting to remove se v1.4.2_06 from Windows add\remove window

I am new here. I have been trying to remove the Java 2 runtime environment file SE v1.4.2_06 from the Windows add/remove screen. I keep getting the following error message: ERROR 1326. Error Getting File Security. C:\program files\java\j2re1.4.2_06\lib\audio\getlasterror5.
Any and all help would be greatly appreciated.
Scaleman

try deleting the file manually.
Another option is to re-install it (so it is in a good state) and then uninstall it.

Similar Messages

  • Error when attempting to remove static route from ASA 5525x running version 9.0(4)

    Hello, 
    I am having difficulty in removing static routes from my ASA5525x, hoping someone here may be able to help.
    Example:
    ASA5525X/pri/act# sh route | in 192.168
    S    192.168.60.0 255.255.255.0 [1/0] via 64.57.xxx.xx, OUTSIDE
    ATLCOLO-ASA5525X/pri/act(config)# no route OUTSIDE 192.168.60.0 255.255.255.0 64.57.xxx.xx
    %No matching route to delete
    There are several which need to be removed, all 192.168.x.x/24, pointing to the Outside interface using the same address 64.57.xxx.xx

    Hi,
    I think i agree with Jon that this is probably due to RRI from the VPN configuration.
    Also , check this output:-
    show asp table routing and see if you see it in here as well.
    We also have some defects so please provide the relevant interface and routing configuration and also the ASA code version.
    Thanks and Regards,
    Vibhor Amrodia

  • I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

    I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

    From an existing Discussion:
    Go to Safari --> Preferences
    Click Security
    Show Cookies
    Type "apple.com" in to top search field
    Select All
    Click Remove
    Click Done
    Repeat the above to confirm they are gone (mine took two attempts)
    Choose Update Genius again in iTunes.
    iTunes 9 - can't update genius https://discussions.apple.com/thread/2151150

  • FRM-40501 Error When Attempting To Change Check Box Value

    I am getting a FRM-40501 error when attempting to update/change a check box value. There are a few factors in my form setup that could be the problem, I will list them below:
    My initial problem was that my INSERT statement would not trigger to fire (based on an IF statement) when my check box value was not initially set to the value of 'Y', even though the initial value was set to 'Y' in the property palette (value when checked was set to 'Y' and value when unchecked was set to 'N'). So, to remedy this I placed a specific literal select of 'Y' and aliased it back to the name of my check box name in the data block query, like: SELECT 'Y' CB_SELECT_SCHOOL FROM user_schools. Then I changed the check box to a database item (value to Yes when it was No before my "SQL select cheat" in the data block query). This made the initial value 'Y' and satisfied my IF statement before my INSERT statement in my trigger. However, now I can not update the check box item.
    Does anyone know a better way to satisfy the initial value of my check box to 'Y', even though in the initial value parameter for my checkbox is set to 'Y' and forms is not really setting the initial value (when the check box is not set to a database item)?
    Thanks in advance.
    Kyle

    I have fixed my issue.
    I have reverted the check box to not be a database item, removed the "SQL cheat" of selecting 'Y' aliasing my checkbox name in the datablock SQL, and changed the initial value of 'N' in the check box property palette. This will force a change by the user making the check box value of 'Y', satifying my insert when-button-pressed trigger to fire and update the selected row.

  • Error when attempting to IMPORT object "TS_CHECK".

    When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
    The following short dump occurs:
    Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
    Except.                CX_SY_IMPORT_MISMATCH_ERROR
    Date and Time          19.11.2008 15:14:08
    Short text
    Error when attempting to IMPORT object "TS_CHECK".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSTD4" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
    not caught in
    procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
    by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "TS_CHECK", the component no. 4 in the
    dataset has a different type from the corresponding component
    of the target object in the program "SAPLSTD4".
    The data type is "I" in the dataset, but "N" in the program.
    Missing RAISING Clause in Interface
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     1
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Trigger Location of Exception
    Program                                 SAPLSTD4
    Include                                 LSTD4U03
    Row                                     51
    Module type                             (FUNCTION)
    Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
    Source Code Extract
    Line
    SourceCde
    21
    DATA: BEGIN OF TD110.
    22
    INCLUDE STRUCTURE TD110_STRU.
    23
    DATA: END OF TD110.
    24
    25
    CURR_TIME = SY-UZEIT.
    26
    CURR_DATE = SY-DATUM.
    27
    28
    CALL FUNCTION 'GET_DB_ORA_RELEASE'
    29
    IMPORTING
    30
    ORACLE_RELEASE = ORA_REL.
    31
    32
    IF FLAG_REFRESH = 'y'.  FLAG_REFRESH = 'Y'. ENDIF.
    33
    flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
    34
    35
    CLEAR TS_CHECK. REFRESH TS_CHECK.
    36
    CLEAR CRITOBJ. REFRESH CRITOBJ.
    37
    CLEAR NR_CRIT_OBJ.
    38
    39
    IF FLAG_REFRESH <> 'Y'.
    40
    41
    Suche zunächst im Arbeitsspeicher !
    42
    CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
    43
    IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
    44
    TS_CHECK[] = TS_CHECK_CACHE[].
    45
    CRITOBJ[] = CRITOBJ_CACHE[].
    46
    OK_1 = 'Y'.
    47
    48
    Suche danach in 'MONI' !
    49
    ELSE.
    50
    PERFORM PREPARE_MONIKEY USING 2.
    >>>>>
    IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
    52
    53
    IF SY-SUBRC = 0.
    54
    OK_1 = 'Y'.
    55
    TS_CHECK_CACHE[] = TS_CHECK[].
    56
    CRITOBJ_CACHE[] = CRITOBJ[].
    57
    ENDIF.
    58
    ENDIF.
    59
    60
    'Same procedure' für datetime:
    61
    IF NOT ( TD110_CACHE IS INITIAL ).
    62
    DATETIME-MONI_DATE = TD110_CACHE-DATUM.
    63
    DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
    64
    ELSE.
    65
    PERFORM PREPARE_MONIKEY USING 3.
    66
    IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
    67
    IF SY-SUBRC = 0.
    68
    DATETIME-MONI_DATE = TD110-DATUM.
    69
    DATETIME-MONI_TIME = TD110-UZEIT.
    70
    TD110_CACHE = TD110.
    Only related SDN post is following, but solved by changing permissions for saposcol.
    Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
    For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
    Thanks in advance for any assistance.
    KR
    Gidion

    Received the solution from SAP Active Global Support:
    This error occurs due a corruption in the table MONI.
    For solving this issue you need to clean the records of this table via the following path :
    1. Call transaction ST03
    2. With GOTO -> Performance database -> Content of database
    3. Push button Delete data group
    4. Enter ID DB
    5. Continue
    6. Confirm the delete
    If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
    Regards,
    Gidion

  • When attempting to remove the Filmconvert plugin from my machine I noticed my adobe\common\plug-ins\CS5.5\MediaCore folder had Vanished !

    When attempting to remove the Filmconvert plugin from my machine I noticed my adobe>common>plug-ins>CS5.5>MediaCore folder had vanished ! and there was also no folder for my cc version at all ? so digging deeper i noticed a large amount of my after effects plugins were installed separately in my applications folder ! I m very confused as to how this has happened and was wondering if anything like this had happened to any1 else ? and how to get everything back to normal ?
    Im now worried theres something wrong with my bios on my Mac and i don't no why my plug-ins would have vanished from where they should be installed? as they still work fine in the actual software itself.

    If you are on a Mac the Library folder is hidden. You have to jump through some hoops to get there.

  • After upgrade SP-Crawl Error: The SharePoint item being crawled returned an error when attempting to download the item.

    Hi All - After the upgrade, I am getting SP-Crawl Error for certain links. I check the Crawl component has proper permission.
    Google is showing some article like
    http://blog.karstein-consulting.com/2012/04/20/error-in-crawl-log-the-sharepoint-item-being-crawled-returned-an-error-when-attempting-to-download-the-item/
    not sure if this resolution is referring to 2010 and/or 2013. 
    I checked the registery editor. I couldn't find 14.0 under the Office Server.
    Any clue?
    Regards,
    Khushi
    Khushi

    I checked the web application policy the search crawl account has full read permission.
    Crawl
    Fiddler
    Log Error referring the Correlation ID
    01/06/2014 13:05:06.14  w3wp.exe (0x1698)                        0x0118 SharePoint Foundation        
     Monitoring                     nasq Medium   Entering monitored scope (Request (GET:/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
    Parent No 
    01/06/2014 13:05:06.14  w3wp.exe (0x1698)                        0x0118 SharePoint Foundation        
     Logging Correlation Data       xmnv Medium   Name=Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD) e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.14  w3wp.exe (0x1698)                        0x0118 SharePoint Foundation        
     Authentication Authorization   agb9s Medium   Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.15  w3wp.exe (0x1698)                        0x1738 SharePoint Foundation        
     General                        af71 Medium   HTTP Request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.15  w3wp.exe (0x1698)                        0x1738 SharePoint Foundation        
     General                        af75 Medium   Overridden HTTP request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.15  w3wp.exe (0x1698)                        0x1738 SharePoint Foundation        
     General                        af74 Medium   HTTP request URL: /sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.17  w3wp.exe (0x1698)                        0x1738 SharePoint Foundation        
     Files                          aise3 Medium   Failure when fetching document. 0x80070090 e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.17  w3wp.exe (0x1698)                        0x1960 SharePoint Foundation        
     Monitoring                     b4ly Medium   Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
    Execution Time=20.5461867360237 e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.17  w3wp.exe (0x1698)                        0x1960 SharePoint Foundation        
     Monitoring                     b4ly Medium   Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
    Execution Time=29.917489513332 e8b1679c-0476-70d4-9fcd-2549ba3ee9d4
    01/06/2014 13:05:06.17  w3wp.exe (0x1698)                        0x1960 SharePoint Foundation        
     Monitoring                     nasq Medium   Entering monitored scope (Request (GET:<SiteURL>nsurance%20Benefits%2fLife%20Insurance%2fBasic%20Life%20and%20ADD&FolderCTID=0x01200039DA632EEACF264685CF39D68A18F7C8)).
    Parent No 
    Any clue?
    Regards,
    Khushi
    Khushi

  • Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

    Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

    I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

  • Acrobat 11.0.7 electronic signature error, "There was an error when attempting to commit this signature".

    Since updating to Acrobat 11.0.7, the electronic signature function has broken. Users receive an error message when trying to insert an electronic signature "There was an error when attempting to commit this signature. The document was not saved. The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder. The document could not be signed. HFT error. This file is already open or in use by another application."
    Error occurs even after saving the PDF locally and renaming. This issue is affecting multiple users and has never occurred in previous versions of Acrobat installed. Temporary workaround is to rollback users to Acrobat 11.0.6.

    Can you try to manually download and install the update from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5000

  • Problems converting PDF to MS Word document.  I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the co

    Problems converting PDF to MS Word document.  I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure.  I attempted to convert the entire document and same result.  I specifically purchased the export to Word feature.  Please assist.  I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

    Hi sdr2014,
    I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
    So, let's try this:
    If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
    Please let us know how it goes.
    Best,
    Sara

  • Get 'Generic Error' when attempting to import .mov files with transparency?

    I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
    I have uninstalled the DVCPro Codec, but it didn't help.
    I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
    I've seen this issue on the web, but never a solution? Anyone?

    Hi Terence,
    I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
    Regards,
    Søren

  • Error when attempting to download SQ01 query data to Excel

    Hi Experts ,
    I am getting error when attempting to download SQ01 query data to Excel .
    Error message - Contact your system administrator. The following template is missing: sap_om.xls
    Message no. 0K 407
    I have looked through the SAP GUI installation files and can find no record of the missing file
    Help

    Hi
    Please check SAP note 305900 & 803067
    Regards
    Ravinder

  • Receiving an error when trying to remove P00 Security role from the user

    Hi All,
    I am receiving an error when trying to remove P00 Security role from the user.
    After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
    I click on Select Roles/Groups
    On the next screen,
    I click on Existing Roles/Groups
    ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
    Regards,
    Vineet

    Hi Vineet,
    My be your selection is incorrect
    Try this
    in Applicaiton Area -- Select ALL
    Functional Area  -
    Select ALL
    Company           -
    Select ALL
    Role/Profile/Group Names --- Give p00* and execute the report
    if you give only p00 it wont give any result
    Hope this helps
    Thank you,
    Kishore

  • Recd following error when attempt to open ebook using ADE 4.0  : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5  Chrome Version 37.0.2062.124

    recd following error when attempt to open ebook using ADE 4.0  : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5  Chrome Version 37.0.2062.124
    chat with customer service at book company i purchased file:
    "Me: I installed the proper adobe software, adobe digital editions 3.0 (now have updated to 4.0) on my mac running os 10.85 however I am getting the following error code when i try to open the file:
    "Error getting License. License Server Communication Problem:
    E_LIC_LICENSE_SIGN_ERROR"
    Charles P.: Okay, what you need to do unfortunately, is contact Adobe at  http://www.adobe.com and they will need to get your license issue resolved.
    Charles P.: Is there anything else I can assist you with today?
    Me: title of error is    Unable to Download
    Me: i dont see how that would be an adobe problem?
    Charles P.: I understand, but it appears that the reason for the download issue is because of the license error the license is related to the Adobe Digital editions software. I understand how this could be confusing but it's due to the authorization of the ADE software. Adobe would need to correct your account issue with the license
    Me: ok but i thought this was a free license from adobe??!!  this is just a digital editions reader, right??
    Charles P.: That is correct it is a free license but your account has to be associated with one license and yes the Digital edition is a ebook reader that our ebooks use for you to view

    Well, just for the halibut I tried opening the book again today and , GLORY BE!,  it worked.
    Guess it may have taken overnight for Adobe to OK my license to their free ADE software. Also works now using Bluefire app as the reader on my android phone, although it was a pain
    to get the book file in the right file folder for bluefire to see it.
    I hope that time also heels the issue with all other Error Getting License users.
    panman

  • Error When Attempting to Create a Password File

    hi all,
    i recevied the following error when attempting to create a password file via the ORAPWD utility. can anyone offer any insight into what is causing this problem?
    $ ./orapwd file=/appl/oracle/product/9.2.0-64bit/dbs/orapwLEAF password=XXXXXX
    Unable to find error file.
    Error code 5
    thanks

    Try to set env variable ORACLE_HOME
    Best Regards
    Krystian Zieja / mob

Maybe you are looking for