Error when attempting to sign panel - could not load the keystore file (password may be incorrect)
Hi
I always get the same error when trying to export as a cs extension for indesign cs5 and cs6 (haven't tried for any thing else)
I am not trying to export to a read only address.
I set up my own certificate, I have not registered with any authority like VeriSign so I presume that I can fill the details as I like, i.e. one name, any password I like.
I select my Java installation by browsing see bellow
I type the same password that I made up for the certificate and then get the error shown above.
Note although it say that it exported the file with some error in fact it doesn't export any zxp file or anything else to any location that I could see let alone the location I specified.
I get the same error when using the adobe exchange packer.
Would very much appreciate a solution
Thanks in advance
Trevor
Hi Yanwen Ju
Thanks
I tried that both the 64 and 32 bit versions, neither work.
The file I use is called "Java.exe" please let me know if this is the correct one and if you have any other ideas
Thanks in advance.
Trevor
Similar Messages
-
Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?
Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.
-
Multiple "slapd[46]: could not load the replica file" Errors
Hi,
We've got an OD master (10.4.8) that sporadically falls into a state where it reports the error "slapd[46]: could not load the replica file." many times over in the system log. It will start this with no warning and when everything is running just fine, but once it has started there errors build up until it is reporting them up to 20 times a second. Usually once it gets to this stage directory services start to suffer badly across the network and all connected servers. We usually have to reboot various servers at this point including the ODM in order to get services up and running again. After the reboots sometimes the problem will just disappear, sometimes it will just start building up again.
We only have one other replica (down from 4) which is on a separate subnet across a WAN. We managed to get rid of the problem for a while by getting rid of the replicas on the local subnet, but it just pops back up again for no apparent reason.
We attempted to install a new ODM with a brand spanking PW server a while ago and new replicas, but hit the same issue sometime into the install.
The only time I've ever seen an issue with this many errors being reported so often it turned out to be a network loop, but I know there is not one present now. I did wonder about a rogue device on the network causing issues but I'm not fixed on this.
Can anyone give me any ideas where to start looking for a resolution?
Cheers
DanStep 1: Download subinacl.msi from the link
http://go.microsoft.com/fwlink/?LinkId=23418 and install it.
Step 2: Download my modified version of reset.cmd from
http://gerger.com/o/assets/x/?id=22540 and save the file in 'C:\Program
Files\Windows Resource Kits\Tools'.
Step 3: Open Command Prompt as Administrator and type the following without
quotes (hit Enter):
'cd c:\program files\windows resource kits\tools'
Step 4: Now type 'reset.cmd' and hit Enter (without quotes)
You will see the Command Line Tool running for some seconds. The issue
should have been fixed and Quicktime should run again.
Enjoy! -
Newbie: could not load keystore file (password may be incorrect)
I'm getting the error in the subject.
Here's the command I used to sign it:
adt -certificate -cn mycertificate 1024-RSA mycertificatefile.p12 ps
Here's what I do next:
adt -package -storetype pkcs12 -keystore mycertificatefile.p12 myTest.air myTest.xml myTest.html
I then use the password "ps" when it asks for the password. This is what it spits back to me.
password: ps
could not load keystore file (password may be incorrect)
usage:
adt -checkstore SIGNING_OPTIONS
adt -certificate -cn <name> ( -ou <org-unit> )? ( -o <org-name> )? ( -c <country> )? <key-type> <pfx-file> <password>
adt -help
adt -migrate SIGNING_OTIONS <air-file-in> <air-file-out>
adt -package SIGNING_OPTIONS <air-file> <app-desc> FILE_ARGS
adt -prepare <airi-file> <app-desc> FILE_ARGS
adt -sign SIGNING_OPTIONS <airi-file> <air-file>
adt -version
SIGNING_OPTIONS: -storetype <type> ( -keystore <store> )? ( -storepass <pass> )? ( -keypass <pass> )? ( -providerName <name> )? ( -tsa <url> )?
FILE_ARGS: <fileOrDir>* (( -C <dir> <fileOrDir>+ ) | ( -e <file> <path> ))*
I do indeed have myTest.xml and myTest.html files in the folder I'm running this in.
Any suggestions as to how I might be able to fix this and proceed, would be highly appreciated. Thanks.
JasonI had the same problems but when I executed the adt commands from bin-debug folder it works....
-
I am trying to create my IPA, I have gone through all the steps to create my certificates etc from Apple but keep getting the above error message when I try to publish my file. (I am using the Flash CS5 iphone packager, not the command line) Mac OSX
Here is the tutorial I am following: http://help.adobe.com/en_US/as3/iphone/WS789ea67d3e73a8b2-240138de1243a7725e7-7ffc.html
What are some things to try to troubleshoot?
Thanks!Hi All!
I’ve just finished an application but I’m having problems generating the .BAR file that I want to submit to the AppWorld. These are the commands I’m executing
First - "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-keytool" -genkeypair -keystore bbDevCertificate.p12 -storepass myPass -dname "cn=Company" -alias " Company "
Second - "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-airpackager" -package AppName_signed.bar AppName-app.xml blackberry-tablet.xml AppName.swf splash.png icons/icon128.png
Finally - "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-signer" -verbose -cskpass myCSKPass -keystore bbDevCertificate.p12 -storepass myPass AppName_signed.bar RDK
My blackberry-tablet.xml is:
<qnx>
<initialWindow>
<systemChrome>none</systemChrome>
<transparent>false</transparent>
</initialWindow>
<publisher>Company</publisher>
<category>core.games</category>
<icon>
<image>icons/icon128.png</image>
</icon>
<splashscreen>splash.png</splashscreen>
</qnx>
The problem comes at the first step. I'm using Flash Professional CS5. When I generate the p12 certificate and I try to export my app using that certificate and the password that I've set, it gaves me the next error:
"Error creating files.
Could not access the digital certificate. unable to retrieve key (password may be incorrect)" -
Error 2519 LabVIEW could not load the TDMS file component
Hi there,
I have LabVIEW 2014 for Linux, and have successfully installed it on OpenSUSE 13.1 with no issues.
The problem I am seeing is with TDMS, I have placed down and "Open TDMS" followed by "close TDMS" provided it my file path to my TMDS File and I see the following error:
I have searched NI.com and google, and what I keep finding is the problem with cRIO. I am running a desktop version of Linux as mentioned above.
Any help or advise would be greatly appreciated.
Many thanks
Kevin
Solved!
Go to Solution.Hey
Thanks for getting in touch with me. I can confirm I have the TDMS components installed and in the correct location.
I will try to reinstall my LabVIEW and see if that helps.
I have two systems that both are running the same version of Linux and I have the same issue on both systems. One is a physical system the other is a virtual machine replicating the physical system.
Many Thanks -
Error message : Nortons Anti Virus could not load the scan engine
Having installed OSX Leopard on my MacBook. Nortons Anti Virus 10.0 displays the ERROR MESSAGE Norton AntiVirus Auto-Protect could not load the scan engine. Please run live update to get the latest version.(Code:6).
Have reinstalled the software and tried updates and i still get the same error message.
Any suggestions on how to remedy this problem ?http://service1.symantec.com/Support/num.nsf/docid/2007102700270911?OpenDocument &seg=hm&lg=en&ct=us
if you followed those steps, my next step would be to contact Norton -
Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.
The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory. -
Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]> -
I am receiving this error when syncing my ipod: iTunes could not copy "song name" to the iPod "name" because an unknown error occurred (-50). I am using iTunes version 10.6.3.25. Why?
Right click the filename that won't download and selsct 'Get Info'. Look at the file path, does it have a //?// in it? That is a problem with Amazon downloads that prevent iTunes from finding the file. Use 'Add Folder' to add the album to your library and try syncing it again
-
when attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?
I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system... -
Logon Error:Could not retrieve the source file for Port "Main"
Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciatedHi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
<Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
<Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
<Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated -
ADF:--Error occurred during initialization of VM,Could not create the Java
Hi Friends,
when am creating new adf page and starting Run the ADF page it will through an error
*** Using port 7101 ***
"C:\Users\Rama Krishna\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.3.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\Oracle\MIDDLE~1\JDK160~1\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1\bin;E:\oracle\product\10.2.0\db_1\bin;C:\orant\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\SSH Communications Security\SSH Secure Shell;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Xms512m -Xmx512m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Process exited.
could you please tell me anybody solve this error.
Thank and Regards
RkraoHi
am facing same issue, My problem was not solve
error like this
*** Using port 7101 ***
"C:\Users\Rama Krishna\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.3.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;%classpath%;.\
PATH=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\Oracle\MIDDLE~1\JDK160~1\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1\bin;E:\oracle\product\10.2.0\db_1\bin;C:\orant\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\Oracle\Middleware\jdk160_18\bin\javac;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Xms512m -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\RAMAKR~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Xms512m -Xmx512m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Could not create the Java virtual machine.
Could not reserve enough space for object heap
Process exited.could u please tell me any body, solve this problem
Thank and Regards
Rkrao. -
Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8 -
Error: Outlook could not create the work file. Office 2013
I was having issues with Windows 8.1 store apps not working and it was suggested to sync my account licenses. I did that but it did not correct my problem. I then ran the troubleshooter app. The troubleshooter found several issues that it
fixed but I cannot remember what they were.
So here's my problem. Now, when I open Outlook (2013) I get the error "Outlook could not create the work file."
Any suggestions?Glad to hear that you have found a solution and thank you for sharing it here, it will be helpful to other community members who have same questions.
Cheers,
Steve Fan
TechNet Community Support
Maybe you are looking for
-
Bizarre WiFi Connectivity Issue; Self-Assigned IPs, Static IP Doesn't work
The short and sweet of the problem: Macs/Apple Devices are pulling self-assigned IP addresses when connecting to a Linksys EA6900/AC1900 router. Here’s the detail: I am working at an office with 1 Airport Extreme and 1 Linksys EA6900/AC1900, both are
-
Currently Being Moderated QuickVPN and Windows 8 I had been using QuickVPN from home to connect to an RVS4000 at my office. I recetnly updgraded to a RV180W. I can connect a Windows 7 Pro PC on my home network to the RV180W with QuickVPN. But I canno
-
I've just started learning apex and I'm confused about page/application items. Since they can be used in SQL and PL/SQL as some kind of variables (for example using bind variable syntax), at some point they should be prescribed a type, since SQL and
-
How to transfer BoM after PO is created?
Hello. I have created a BoM in the wrong assembly. The materials now already have POs created. Now, I would like to transfer this BoM to the correct assmebly, but how does this effect the materials that have purchase orders? If I just delete the mate
-
I must be doing something wrong because none of the Adobe software can open my RAW files.
None of the adobe software recognize the RAW files from my Nikon D7100. I had no problems opening raw files from my D5000. I even tried to convert them to DNG but that didn't work either. I have used Lightroom, Photoshop CC, Bridge, Photoshop Eleme