Error when attempting to upgrade firmware: uprade are failed!

firmware currently set from factory at firmware 1.0, and the failed message comes up a few seconds after selecting the .bin file on desktop and hitting the upgrade button. cant seem to figure out why, tried re-downloading the firmware zip package, but no good, same message. though the progress bar still says its working at updating, a window will pop up eventually saying: upgrade failed.
i even tried the v2 and v1 and 1.1 drivers, no go. i also tried the .exe updater, and get the message: "invalid code pattern"
can anyone help me with this? thanks!

You seem to be having difficulties upgrading your router's firmware. You might also be loading the wrong one also. Please look for the exact model number and version of your router first. You can see that information underneath the device on the black sticker. On the top left hand corner just right underneath the "Linksys A division of Linksys" logo you can find the exact model and version of your router.
After downloading the file from the downloads site, you would need to unzip it first if it is on a ZIP format and look for the bin file that you would need to load on the router. The bin file is the image file. After extracting that on your computer, go to the administration tab>Firmware Upgrade subtab then browse for the bin file and open it then hit Upgrade. If the error that you receive is "invalid code pattern" as you mentioned it means you are loading the wrong firmware. Remember that you would need to load the firmware for the correct version of your router, otherwise your router may get broken. If you would want to use the tftp.exe file, you have to choose the bin file also if browsed, then hit upgrade if you have completed the 192.168.1.1 server and admin password. Goodluck ayt!
"You tried your best and you failed miserably! "

Similar Messages

Error when attempting to upgrade SSM to IPS 6.1

I'm currently running 6.0(4)E1 and when I attempt to upgrade it says "Cannot upgrade software on the sensor. This package cannot be installed on the SSM-IPS10 platform."
I've tried upgrading via IDM, FTP, SCP and I get the same error.
I'm attempting to upgrade using the IPS-AIM-K9-6.1-1-E1 package.

The SSM files you are pointing to at http://www.cisco.com/cgi-bin/tablebuild.pl/ips6-asa-aip are System Images.
System Images should only be used when trying to get the module to look like it came fresh from manufacturing. All configs are removed during the System Image process.
When trying to upgrade from one version to another you would not use System Images. Instead you would use the upgrade files.
Upgrade files for all sensors are located here:
http://www.cisco.com/cgi-bin/tablebuild.pl/ips6
With signature updates being located here:
http://www.cisco.com/cgi-bin/tablebuild.pl/ips6-sigup
The SSM uses the same Upgrade files as every other sensor with the exception of the AIM-IPS modules for the ISR Routers.
The AIM has a Mips processor rather than an x86 processor.
So the AIM has it's own set of upgrade files with binaries compiled for Mips.
ALL other sensors (including the SSM) use the standard set of upgrade files.
When in doubt it is best to read the README file for the particular version you are wanting to load. The README should be able to tell you which files are applicable to your sensor models.

Error when trying to upgrade firmware.

Greetings.
I was updating the firmware for my WRT54G V5 (via wired connection), but suddenly the router stopped responding. Since then, the power light has been intermitent and I can't even try to connect to the router.
Is there any solution?
Thanks in advance.

Here is another protocol that might help you.
To reset your router to factory defaults, use the following procedure:
1)  Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4)  Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key.  You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out."   If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, the version of your router, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

After upgrade SP-Crawl Error: The SharePoint item being crawled returned an error when attempting to download the item.

Hi All - After the upgrade, I am getting SP-Crawl Error for certain links. I check the Crawl component has proper permission.
Google is showing some article like
http://blog.karstein-consulting.com/2012/04/20/error-in-crawl-log-the-sharepoint-item-being-crawled-returned-an-error-when-attempting-to-download-the-item/
not sure if this resolution is referring to 2010 and/or 2013.
I checked the registery editor. I couldn't find 14.0 under the Office Server.
Any clue?
Regards,
Khushi
Khushi

I checked the web application policy the search crawl account has full read permission.
Crawl
Fiddler
Log Error referring the Correlation ID
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (Request (GET:/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Parent No
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Logging Correlation Data      xmnv Medium Name=Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD) e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af71 Medium HTTP Request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af75 Medium Overridden HTTP request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af74 Medium HTTP request URL: /sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
Files                         aise3 Medium Failure when fetching document. 0x80070090 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=20.5461867360237 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=29.917489513332 e8b1679c-0476-70d4-9fcd-2549ba3ee9d4
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (Request (GET:<SiteURL>nsurance%20Benefits%2fLife%20Insurance%2fBasic%20Life%20and%20ADD&FolderCTID=0x01200039DA632EEACF264685CF39D68A18F7C8)).
Parent No
Any clue?
Regards,
Khushi
Khushi

HT201210 When i am upgrading firmware to i0S 6 i am getting unknown error for iphone 4

When i am upgrading firmware to i0S 6 i am getting unknown error for iphone 4

Take a look at this link, http://support.apple.com/kb/ts1424

Error when Trying to Upgrade from 8.1.7.4 to 10.2.0.3

Hello -
I am getting this error, when attempting to run the ultu102i script in preparation for an upgrade to 10g:
SQL> @utlu102i
DECLARE
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 1560
I have upgraded many databases to 10g from 8i, and have never seen this error before. I have the database started as 8i, and my environment set up as 8i (ORACLE_HOME, etc), and then I try to run teh utlu102i script that is within the /rdbms/admin directory of the 10g software home location.
Any ideas are greatly appreciated.
Thanks!

edit the utlu102i and utl102x.sql scripts and comment out the following two statements.
SELECT value INTO db_undo FROM v$parameter
WHERE name = 'undo_management';
SELECT value INTO db_undo_tbs FROM v$parameter
WHERE name = 'undo_tablespace';
this ones in metalink, i came accross it when upgrading to 10.2.0.3 i think its a new bug in this pathcset.
metalink noteid is: 407031.1
Message was edited by:
chris_c

There was an error when attempting to connect to the Windows Live Calendar service.

I keep getting a message when I want to check my email you are not connected (but I am,as I can get in my Webbrowser) and the following error message
There was an error when attempting to connect to the Windows Live Calendar service. If the error persists, check to see if there's an upgrade of Windows Live Mail available or contact a service representative.
Can anyone help me, no sense sending me an email, I cannot get into my email.
Lucienne1

Hi,
Try installing Windows 2012 Live Essentials here.
You will have to set up your Pop 3 or IMAP email account after installing the updated version per above.
Are you using an Internet Service Provider Email account or a cloud based (IMAP) Email account?
Pop 3 accounts will require incoming and outgoing server addresses and any additional security settings required by your ISP. If you don't have the required settings for Pop 3 you will have to contact your ISP for those.
Jaco
****I am not an HP employee****
Errare humanum est.

Error when attempting to import object C1

Hi,
We are doing an ECC 6.0 Upgrade from 4.6C version.
While executing Payroll Simulation, we are getting short dump error stating Error when attempting to import structure C1.
This error occurs in the Payroll driver RPCALCX0.
Requests for your inputs.
Regards,
Ravi.

'The data type is "N" in the dataset, but "C" in the program.'
Rob

CAT2 problem: Error when attempting to IMPORT object "C1

Hello Friends,
We are upgraded from SAP 4.6C to ECC6.0
I am getting problem for CAT2 Transaction. CAT2 is working fine for most of the personnel numbers but for few persons, it is giving an ABAP dump.
Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Short text:     Error when attempting to IMPORT object "C1".
We are not able to distinguish what is the cause for CAT2 giving dump for few employees. We are getting this dump in the initial screen when we enter the timesheet profile and personnel number.
I have also done the comparision betn the employess for which CAT2 is working and for which it is giving dump. but dont got any clue.
Request you to suggest me
Madhu

Hi,
This is a really old thread. Please open a thread for your specific issue.
-Paul
Moderator

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

From an existing Discussion:
Go to Safari --> Preferences
Click Security
Show Cookies
Type "apple.com" in to top search field
Select All
Click Remove
Click Done
Repeat the above to confirm they are gone (mine took two attempts)
Choose Update Genius again in iTunes.
iTunes 9 - can't update genius https://discussions.apple.com/thread/2151150

FRM-40501 Error When Attempting To Change Check Box Value

I am getting a FRM-40501 error when attempting to update/change a check box value. There are a few factors in my form setup that could be the problem, I will list them below:
My initial problem was that my INSERT statement would not trigger to fire (based on an IF statement) when my check box value was not initially set to the value of 'Y', even though the initial value was set to 'Y' in the property palette (value when checked was set to 'Y' and value when unchecked was set to 'N'). So, to remedy this I placed a specific literal select of 'Y' and aliased it back to the name of my check box name in the data block query, like: SELECT 'Y' CB_SELECT_SCHOOL FROM user_schools. Then I changed the check box to a database item (value to Yes when it was No before my "SQL select cheat" in the data block query). This made the initial value 'Y' and satisfied my IF statement before my INSERT statement in my trigger. However, now I can not update the check box item.
Does anyone know a better way to satisfy the initial value of my check box to 'Y', even though in the initial value parameter for my checkbox is set to 'Y' and forms is not really setting the initial value (when the check box is not set to a database item)?
Thanks in advance.
Kyle

I have fixed my issue.
I have reverted the check box to not be a database item, removed the "SQL cheat" of selecting 'Y' aliasing my checkbox name in the datablock SQL, and changed the initial value of 'N' in the check box property palette. This will force a change by the user making the check box value of 'Y', satifying my insert when-button-pressed trigger to fire and update the selected row.

Unexpected error when attempting to view Global Navigation (root site top navigation)

I am getting an “unexpected error” when attempting to view Navigation settings at the root site of our SharePoint environment. We are running SharePoint 2013 site collection in SharePoint 2010 compatibility mode. The error happens when you try
to view Global (Top-Level) Navigation Settings in our SharePoint root site.
(Relative URL: /_layouts/AreaNavigationSettings.aspx).
I copied the exact errors from SP Logs below. There is some null reference cited. Where is the root of the problem?   Any information would be helpful!
First, there is a general “Medium” level event that cites an Application Error
Time:
06/10/2014 11:42:01.96
Process:
w3wp.exe (0x2538)
Thread (Hex):
0x1930
Product:
SharePoint Foundation
Category:
General
EventID:
8nca
Level:
Medium
Correlation:
3194999c-3ebd-e089-7f01-acff58324051
Message:
Application error when access /_layouts/AreaNavigationSettings.aspx, Error=Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.PublishingPage.GetEffectivePageCacheProfileId(Boolean anonUserProfile)
at Microsoft.SharePoint.Publishing.CachedPage..ctor(PublishingPage page, SPListItem altItem, String id, String parentId, CachedUserResource title, String url, CachedUserResource description, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedPage.CreateCachedPage(PublishingPage page, SPListItem altItem, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedListItem.CreateCachedListItem(SPListItem item, SPListItem alternateItem, Boolean parentIsWeb, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateWrappedObject(SPListItem superUserVersion, SPListItem superReaderVersion, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedArea.GetChildForListByQuery(String listName, SPQuery query, SPWeb contextWeb, Boolean onlyPopulateCache, Boolean skipIfThrottled, List`1& itemsFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.FetchDynamicItems(PublishingWeb pubWeb, NodeTypes includedTypes, Boolean& websFetched, Boolean& pagesFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildrenInner(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildren(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.AddChildrenToControl(String parentId, PortalSiteMapNode node, Int32 depth, Int32 maxDepth)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.InitializeNavigationEditSort()
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Then, there is the “Unexpected” level event that cites a NullReferenceException
Time: 6/10/2014 11:42:01.96
Process: w3wp.exe (0x2538)
Thread (Hex):
0x1930
Product:
SharePoint Foundation
Category: Runtime
EventID:
tkau
Level:
Unexpected
Correlation:
3194999c-3ebd-e089-7f01-acff58324051
Message:
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.PublishingPage.GetEffectivePageCacheProfileId(Boolean anonUserProfile)
at Microsoft.SharePoint.Publishing.CachedPage..ctor(PublishingPage page, SPListItem altItem, String id, String parentId, CachedUserResource title, String url, CachedUserResource description, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedPage.CreateCachedPage(PublishingPage page, SPListItem altItem, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedListItem.CreateCachedListItem(SPListItem item, SPListItem alternateItem, Boolean parentIsWeb, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateWrappedObject(SPListItem superUserVersion, SPListItem superReaderVersion, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedArea.GetChildForListByQuery(String listName, SPQuery query, SPWeb contextWeb, Boolean onlyPopulateCache, Boolean skipIfThrottled, List`1& itemsFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.FetchDynamicItems(PublishingWeb pubWeb, NodeTypes includedTypes, Boolean& websFetched, Boolean& pagesFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildrenInner(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildren(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.AddChildrenToControl(String parentId, PortalSiteMapNode node, Int32 depth, Int32 maxDepth)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.InitializeNavigationEditSort()
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hi ,
According to your description, my understanding is that you encountered the error “Application error when access /_layouts/AreaNavigationSettings.aspx, Error=Object reference not set to an instance of an
object” when you try to enter Navigation Setting page.
For your issue , please refer to the blog:
http://praveenix.wordpress.com/category/uncategorized/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

"Unknown Error" when attempting to publish through Muse

I recently updated my log in information to better organize log in credentials that I currently have deployed. I edited just the basic email and password as well as adding another one of my alternate email addresses. When I did that the ability to manage the site I have published through muse disappeared through the website interface. I also am receiving an "Unknown Error" when attempting to publish from the Muse application itself. Log in credentials are definitely updated and correct, just not sure where the others went.
Any help in the right direction is appreciated!

Hello,
I'm having this exact same issue. Same popup. Could I get some help resolving it as well?
I am an admin on the site in question, not the owner. I updated my BC email address to match my adobe CC username/email, but it still doesn't seem to be working.
Chris Mayer
The site I'm trying to upload my muse file to is http://popsleep.businesscatalyst.com/ (it should be the only BC I have access to I believe)

Error when attempting to get processing resources: com.sap.aii.af.service.

Dear All,
i am getting below error in RWB in receiver Channel
Error
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'CONNECTION STRING: NoClassDefFoundError: sun.awt.X11GraphicsEnvironment (initialization failure)"
Note: outbound has processed succesfully in both ABAP and Java Stack.

Hi,
Can you please let us know, which receiver adapter are you using??
I guess it is JDBC: IF it is ...can you check the Driver and Connection details maintained on the channel.
JDBC Driver:com.microsoft.sqlserver.jdbc.SQLServerDriver
CONNECTION:jdbc:sqlserver://IP ADDRESS:PORT;Database=HOST NAME;
-Rahul

Error when attempting to upgrade firmware: uprade are failed!

Similar Messages

Maybe you are looking for