Error when backing onto blu ray: message: Result 13, Command 173, Sense 5, asc:48, ascq:2

Above error message when I attempt to backup my catalog in Photoshop elements 11. I have downloaded new firmware for the blu ray drive. The error occurs at the end of the backup. However backup failed....

Hi,
did you get a resolution on this?
I get the very same error when trying my first backup to a new LG Blu Ray burner. I have Win 7 and PSE12.
The error happens in the first blu ray. When retrying I get the same error. Very annoying: spent 2 BD-R discs and half a day!

Similar Messages

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

Hello there, Minig1501.
The following Knowledge Base article has some information on the message you're receiving:
Unable to use Apple Push Notification service (APNs)
http://support.apple.com/kb/TS4264
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Blu-Ray build results in a non-readable / corrupt iso-image

Hello
I have been working on a project that was created with PP CS5.5 using Windows 7 x64. The PP project has various footages in 1080p, mostly from Panasonic HDC-SD900 with 1080p 50p AVCHD material. There are some clips that were shot with Canon EOS 7D, and a crappy helmet camera. All the sequences were exported using H.264 Blu-Ray that results in m4v & wav files.
Everything works fine in Encore, even when previewing and checking the project, but when I build it to an image and mount it, windows can't read the image. It says it's ureadable / corrupt. I've tried to mount the image with three other computers, using Virtual Clone Drive and Daemon Tools.
Before I started to work on this project, I created a small test-image with Encore that had a few seconds worth of material from the SD900 just to see how blu-ray image building works, and it worked fine.
I've tried to change the BR-R size to 50GB in Encore, but I get same results. This was the only thing that came to mind, because the project output size was very close to 25GB.
I tried googling and searching this forum, but to no avail...
Please help.
-Erkki

Says here http://forums.adobe.com/thread/890691?tstart=0 that single layer BluRay is actually 22.5Gig
Since you CAN create a folder, I **think** that Imgburn will create an ISO from a folder
FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc (send the author a PayPal donation if you like his program)

Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030

Hi All,
I have created an enhancement for ICWC component ICCMP_BP_DETAIL.
While trying to diplay this using trn BSP_WD_CMPWB , I am getting the message
Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030.
What is the reason behind this? Also while testing this application the web page that
opens up remains blank...
Can anybody help me out with this?
thanks
Juhi Kulshreshtha

Juhi,
I meant Re: Error while loading the runtime repository in transaction BSP_WD_CMPWB
check it out.
Regards,
Amar.

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

261 error when backing up just purchases

261 error when backing up just purchases I should not be getting this error if the problem is with playlist with the wrong characters in them, I am backing up just purchases.
Thanks In advance Krisal
Gateway Pentium 4 Windows XP Using DVD and CD

Help! I received the same error.
Acer laptop Windows Vista 1 GB RAM

Try to setup powerdvd 13 and got error for my LG blue-ray about 'SATA HL-DT -ST device'

i try to setup powerdvd 13 and got error for my LG blue-ray player about 'SATA HL-DT -ST device' that is not support the program setup. can you help me..?

What is powerdvd, and what does it have to do with Adobe software?
A quick google shows that is the product of a different company... you need to contact that company
http://www.cyberlink.com/store/powerdvd-ultra/buy_en_US.html?affid=2581_1013_80_paidsearch -us_0_1&gclid=COzWlpDVp7gCFadxQgodbhIAmA

CS6 Error Message When Burning a Blu Ray Project to DVD

Hi,
I'm trying to burn a Blu Ray project to DVD and I'm getting this message when I try to build the project:
The project is an excerpt from a larger one and contains only 2 video files and no menus. However it's particularly worrying because the project from which this is an excerpt is large and complex. I have created it as a Blu Ray project but my final deliverable is DVD. I really don't want to have to rebuild as a DVD project because it took half a day to link up all of the menus and chapters.
Is there something I need to do in my encode settings?
Thanks in advance.

Thanks for your reply John.
It's extremely frustrating that this is the case. I'd have started with a DVD project in the first place had I not read this: http://helpx.adobe.com/encore/using/building-finished-project.html , specifically the following excerpt:
"You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format."
Reading that gave me the confidence to go ahead and build as a Blu Ray. I now have to find another half day to rebuild the project as a DVD.
Thanks again for the information.

When burning to blu-ray gets 99% done then error "device not ready"

I have Elements 11 and an ASUS Combo burner. I can burn to DVDs but when I try to burn to blu-ray it gets done encoding and compiling then at 99% switchs message to "device not ready". The computer sees the drive and the disc is formatted. Any thoughts on why Elements stops right when at end before actually burning to the disc?

I don't know the answer but I suspect Blu-Ray disks are not supported in PSE. I haven't tried it personally but I will have to try it one of these days when my computer is repaired to my satisfaction. I was without a machine for nearly two weeks and now I am using a borrowed one from a friend.

Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5

Yesterday I spent more than 7 hours trying to create and burn a Blu-ray disc (actually an AVCHD disc on DVD-5 media) in both FCP 7 and Compressor 3.5. In every case, disc creation would go to completion of the encoding of the video and audio files, but when I was asked to insert a disk, I would do so and the disc would spin for about 30 seconds and then I would get the following error message: "There was an error burning your disc. The bit rate exceeded the maximum allowable." This message cannot be a correct description of the problem because I used the Blu-ray template that Apple provides in FCP 7 and Compressor 3.5 to create my disc. This template limits the bit rate to a maximum of 15 mbs and my video was only 15 minutes in length.
Additional information as follows: I am using an Early 2008 Mac Pro 8-core. I have Final Cut Studio 3 installed with all of the latest updates. I am running Snow Leopard 10.6.4 (latest updates all installed),and I have experienced no other problems with FCP 7 or Compressor 3.5. My Mac Pro's internal superdrive is functioning fine, and in fact, I eventually took my FCP7 project and rendered it to a QT reference movie and used that in Adobe's Encore CS5 to burn and AVCHD disc using the same internal DVD burner on my Mac Pro and it worked perfectly.
I am seeking any suggestions for how to address the problem (whatever it is) that gives this error message. Would you recommend a reinstall of the applications in Final Cut Studio 3? Other suggestions? Has anyone seen this error message when trying to burn Blu-ray or AVCHD discs from FCP 7 or Compressor 3.5?
Thank you in advance for your help.
Tom

Guys,
I am deeply appreciative of all of the suggestions and help received on this issue. I apologize for not responding sooner, but i have been looking at the problem described in this thread from numerous perspectives.
Jeremy, you may well have hit upon the solution, and I am trying your suggestion now. I did not realize that when you selected the Blu-ray template and directed it to a DVD burner that would make an AVCHD that you could alter the bit rate settings. I looked at the default bit rate that Apple sets when you select this template and I found that it allowed a maximum of slightly over 17 MBs and an average of 15 MBs. That is too high for an AVCHD disk, and thus the error message that I am getting may well be correct and not in error as I previously thought.
I have found that I prepared Blu-ray AVCHD disk as recently as late April with no problems so I don't know why I have not run into this problem of too high a bit rate before, but I had not. It may be that I used a Custom Present that I prepared and set my own bit rate for those disks.
In any case, I am trying a run now where I have set the bit rate to a maximum of 15 and an average of 13. We shall see if that still produces the error message. I shall post my results when I know them.
Again, thanks to all of you for your fine help.
Tom

Errors when backing to tape ORA-19624 ORA-19511

Hi,
We got an error yesteday when backing u to tape, this happens very rarely but following is the message
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-10035: exception raised in RPC: O
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
RMAN-10035: exception raised in RPC: O
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
RMAN-10035: exception raised in RPC: O
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
RMAN-03015: error occurred in stored script BGT2_BSBGPRD1_HOTBCK_DY
RMAN-03007: retryable error occurred during execution of command: backup
RMAN-07004: unhandled exception during command execution on channel ch1
RMAN-10035: exception raised in RPC: ORA-19502: write error on file "db_BSBGPRD1_98108_1_667503967", blockno 4323713 (blocksize=512)
ORA-27030: skgfwrt: sbtwrite2 returned error
ORA-19511: VxBSASendData: Failed with error:
Server Status: Communication with the server has not been iniatated or the server status has not been retrieved from the server.
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
any suggestions
Kedar

Hi,
If I check in TOAD, then I see that the max size of the tablespace is unlimited. Btw, Tablespace XYZ is actually an index tablespace - dont know if this makes a difference. The max size of the data tablespace is also unlimited.
Using the query select * from user_ts_quotas or dba_ts_quotas, I dont see tablespace XYZ or its data tablespace in this result set. I'm not sure why.
Maybe giving the user unlimited quota on the tablespace might solve the problem - i dont know, but if it does, then I have to ask why has it worked all the time without this and only now it's giving an error??
The user has been doing the same thing everyday for the past couple of years and only now getting this error.

Problems using 1080/50p video files in Premiere CS5 to Encore onto Blu-ray

Firstly apologies if this has been covered, I've searched various forums but not found anything on 1080/50p.
I have a Panasonic HDC-TM700 video camera which I only had for a week or so before I went on a weeks holiday in Egypt, so I thought I'd record my memories in the superb 1080/50p mode.
Upon returning I am now editing my work in Premiere CS5, the resulting video is very jerky (it plays back OK on the camera), rendering a sample in Encore I discover Blu-ray doesn't support 1080/50p so I tried the HDTV 1080i 25 setting, on the resulting Blu-ray the panning scenes are not smooth viewing and the video is still rather jerky.
Should I have recorded the footage in 1080 interlaced instead?
Does anybody know if I can salvage my memories?
Hoping you can help
Regards
Kevin

I have the same camera, only it's NTSC so 1080p60. What I do for now, until there is wider acceptance for this format, is that I export to 720p60. I know I may sound like a party pooper but I prefer progressive before interlaced... I am sure there will be support for 1080p50 or 1080p60 in the near future, so your memories will not be lost!
Some Bluray players do support 1080p60/50, but not from a disc but an SD card instead. If that's an option for you, go with that!
Here's the player I use which plays back 1080p60 beautifully from SD, I'm sure there is an equivalent player for PAL:
https://panasonic.ca/english/audiovideo/bluray/players/DMPBDT100.asp

Device error to export on Blu-Ray

In Adobe Elements 4, when i made export to Blu-Ray a device error apear . I repeat the export three times with diferent discs,Verbatim 2xBD-R , Memorex 4xBD-R,and the same problem apear..The computer is a Sony Vaio AR-71S. Please help me...

No need to say that you already tried to restart application.
For 'Device error', try whether device working properly with some other application like Window Movie Maker or other app comes with BluRay burner.
'Device error': try to connect device first and add media to it and than start Premiere Elements
'Device Error': Insert some bluray dics or movie to bluray burner and check whether window explorer able to read it properly.
'Device Error': update Blu-ray burner firmware.
'Device Error': In Premiere Elements, Share, select 'BluRay' not 'DVD' and click on rescan.
Please try these options and till than let me think some more way to help.

Experiencing an error when backing up my iphone 4 after loading the newest software

i just finished downloading the new software via itunes onto my iphone4. There is an error when adding back the backup to the phone. i dont have my apps and my photos, Where did they go?

ME TO! :/

TimeMachine errors when backing up to XSan Volume

Hi all,
I've been trying to solve this problem for a while. I have an apple xraid unit with a timemachine enabled afp share that I want to use for client backups over our network.
10.5 and 10.6 clients initially can configure timemachine preferences to use this share and the first backup image gets written. However, on subsequent backups a new sparse-image bundle is created with a numerically incremented filename. (i.e. client_backup.sparsebundle gets created then sometime later timemachine creates client_backup(01).sparsebundle).
Also, I've seen subsequent backup attempts simply fail with "Volume cannot be accessed (exit code 109)" errors. From the client console, I see these log messages:
Mounted network destination using URL: afp://[email protected]/TimeMachine
com.apple.launchd[1] (com.apple.netauth.sysagent[1333]) Exited with exit code: 255
diskarbitrationd[13]: unable to repair /dev/disk2s2 (status code 0x00000008)
om.apple.backupd[1332]: Failed to mount disk image /Volumes/TimeMachine/client_backup.sparsebundle (DIHLDiskImageAttach returned: 109)
Has anyone seen similar behavior? I'm stumped as to why the first backup is apparently successful but subsequent backups fail. Thanks for reading.

I'm seeing the same problem over our network to an Xserve with an external RAID 5 volume.
The user that's having the problem had lots of errors when trying to back up due to funny files on his hard drive that were WAY down in the hierarchy of his drive... like 15 folders deep.
I'm going to try running Disk Warrior on his drive to see what's up. Maybe somethings broken...

Error when backing onto blu ray: message: Result 13, Command 173, Sense 5, asc:48, ascq:2

Similar Messages

Maybe you are looking for