Error when booting computer

well its been goin on for bout 6 months since ive purchased the computer and i was wondering how to disabe my fast track controller
when i boot up it has a lil error that says cant detect my fast track controller bios or something and i heard this was a problem on the asus boards but not to much on msi boards so im wonderin how to fix the problem
really isnt a big problem i still load up to windows pretty fast but i would like to just disable what ever its lookin for
my specs are below if you need to know my system

Because your board isn't a via board but a nvidia board the thread is moved to the nvidia section.
Good luck!

Similar Messages

I continue to have an Adobe error when booting up my computer. It reads: this specific module could not be found. \AppData\local\diagnostics\tlfpizv.dll

I continue to have an Adobe error when booting up my computer. It reads: this specific module could not be found. \AppData\local\diagnostics\tlfpizv.dll
Please tell me there is a fix that does not involve buying a computer clean sweep program.

Hi brigitta2,
You might be getting the error message because of any of the following reasons:
.dll files are corrupt or missing
Attack of malware or other spyware
Incorrect installation of applications
Damaged Windows registry
Old Windows device drivers that need to be updated
The problem can be sorted if you know the exact reason behind the same. Please let me know the exact error message that appears on your screen.
If the issue is with damaged files then you might need to replace them or if it is a system issue, then please take your laptop to an expert who can deal with system issues.
Regards,
Anubha

Adobe error when booting

Hi
My MacBook Pro running Mountain Lion is logging the following Adobe error when booting. I don't know which program from Adobe it comes from. I have Flash and Photoshop installed.
It takes my Mac 11 seconds of boot time to generate this error every time I boot. I would like to get rid of the program causing it.
Frank
My log:
26/09/12 07.27.16,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=264[ksadmin] clearing CS_VALID
26/09/12 07.27.27,665 osascript[276]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.44,484 osascript[280]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,308 osascript[281]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,401 osascript[282]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,753 osascript[283]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,890 genatsdb[251]: *GENATSDB* FontObjects generated = 737
26/09/12 07.27.46,927 osascript[284]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
26/09/12 07.27.46,983 osascript[285]: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

First, in System Preferences -> Users & Groups -> Login items, look for anything Adobe in the list of items and remove it. Then your Mac will not attempt to load anything Adobe during boot-up or log-in anymore, but boot much faster again.
Then see if problems persist when starting your Adobe apps. If so, uninstall them completely (!!! - usually, there are files left over under Applications and in Application Support in the Libraries - remove those manually), then re-install these apps fresh.

[Solved] "Version Magic" error when booting with m

Hi, I compiled kernel 2.6.16.18 and I receive the following error when booting:
ide_core: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
amd74xx: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
generic: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
ide_disk: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
cdrom: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
ide_cd: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
ide_floppy: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
sd_mod: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
libata: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
sata_nv: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
jbd: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
ext3: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
jfs: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
reiserfs: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
xfs: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
I compiled my kernel with this line:
# make -s clean bzImage modules modules_install
Any ideas?

Ok, I fixed it.
When doing mkinitrd auto it would make an initrd image from the modules at /lib/modules/2.6.16-ARCH when it had to do it from /lib/modules/2.6.16.18-ARCH
I fixed it with
mkinitrd kernel_version=2.6.16.18-ARCH
Also my menu.lst was wrong, a new image was created under the name of
initrd-2.6.16.18-ARCH.img.
My menu.lst pointed to initrd26.img. I didn't change it before because I didn't know, someone should update the wiki article about compiling the kernel from source.

Imaq.dll error when boot up Windows

Hello,
I have a little Problem with Labview 8.6. After i installed the driverpack for the dvd, my Windows give my the error
Der Prozedureinsprungpunkt "ProgramFPGAs" wurde in DLL "IMAQ.dll" nicht gefunden.
my tranzlation
the entry point "ProgramFPGAs" is not found in the Dll " Imaq.dll
Labview start an run without problems, only this message at windows boot up is annoying.
was anyone a idea to fix the problem or atleast stop that messagebox
Thank you
Solved!
Go to Solution.

Hi DRhatje.
Good Morning and I hope your well today. Thanks for your post.
I think thats a pretty good translation, the error message I was thinking of can be found in the knowledgebase article below.
The suggested cause of the error is that the IMAQ.exe is set (by default) to start on startup. But if you don't have a framer grabber installed on the machine then you could well see this error. The solution is to remove the exe from the startup list on your system. The steps to do this is listed in the link below but in summary,
From the section in the screenshot you sent me you should be able to
select the "Selective Startup", then navigate to the "Startup" tab and
uncheck the IMAQBoot.exe.
If this reverts back to the default
settings on restart, this is probably an indicator that your Admin
Rights on this PC are limited.
I think that a quick way to check
this is to go to Start>Run and type "regedit". This is essentially a
more advanced way to manipulate similar settings, but if you don't have
Admin Rights on the PC then you would most probably be denied access.
In any case though, please ask one of your IT colleagues to use their
passwords and change this setting. It will get rid of the warning you
are seeing until you start using our Vision Hardware and need to
reactivate it.
Make sure you click on "Apply" before you exit this utility.
Why do I get "IMAQBoot.exe - Entry Point Not Found" error when I restart computer?
http://digital.ni.com/public.nsf/allkb/AD70B1036D5B950B8625752400578CFE?OpenDocument
This should at least remove the error message upon start up.
Please let me know how you get on and I hope this helps!
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Windows "Blue screen of Death" when booting computer attached to LabVIEW PXI realtime system

Good Morning (at least in the western hemisphere)!
I'm having a problem on two test systems where intermittently, at least on one machine, I get a Windows "Blue Screen of Death" error message when booting the machine connected to a PXI RT system. I reloaded the RT systems software yesterday (LV RT 7.1.1, NI-VISA 3.3.1) and am having this problem on two different setups, two laptops, two PXI chassis. Our short term work around has been to boot with the network cable removed at one end or the other, but these are the baseline models for a larger test system in the design/construction stage that will not be used by knowledgeable engineers but by (probably more knowledgeable!) technicians. Any ideas would be a help
Thanks again,
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Blue screens are almost always caused by drivers and not by applications, so chances are there's a problem on the driver level. The crash log file will be instrumental to diagnosing this problem.
Turn on the crash event logging as described in this Microsoft KB:
http://support.microsoft.com/kb/314084/EN-US/
...and then post the details from the crash found in the Windows Event Viewer here. That will help us narrow the problem down.
--Paul Mandeltort
Automotive and Industrial Communications Product Marketing

Disk read error when booting Windows 7 / White screen / Screen frozen

Hello,
I installed Windows 7 and Mac OSx on Dual boot.
1) A problem arose when starting up. Sometimes the screen freezes after i have selected Windows 7 boot on BootCamp.
2) Second problem, when booting the screen is white and doesn't change.
3) Third problem, "Disk read error occured". This is the message that appears on the screen when booting Windows 7.
4) Fourth problem, a blinking folder with a Question Mark on it.
Please help with these problems.
Thank you for your help.
Stinou142

Windows insists that its Partition Map be set up the Windows way. No exceptions. If you use anything other than BOOT CAMP (or Open Source REFIt) to do the partition setup, it will not work.
WARNING: If you allow Windows to Modify the partition Map directly, Windows will clobber Mac OS X so completely that will require a complete Mac OS X Re-Install. Windows in not a pleasant guest.
Be certain you are using the correct version of BOOT CAMP to match Your Mac OS X, and check for which versions of Windows are supported under it.

Error when boot on RHEL4

hello everyone
i got this problem when boot the system on my server the server hang in
enabling swap space
its hang for long time and not log in
thanks

mahmoud2244 wrote:
hi
i got nothing i did as you said but i got nothing
i reboot the system using install cd
and
it boots as you said under the /mnt/sysimage/ but i dont understand the last part can you explain
You may notice and are able to correct an issue in the /etc/fstab or your mounted root filesystem.
Equally your mounted /var/log/messages /var/log/boot or /var/log/dmesg may show something.
thanksBefore you execute chroot /mnt/sysimage these files are located at:
/mnt/sysimage/etc/fstab
/mnt/sysimage/var/log/messages
/mnt/sysimage/var/log/boot
/mnt/sysimage/var/log/dmesg
After you execute chroot /mnt/sysimage these files are located at:
/etc/fstab
/var/log/messages
/var/log/boot
/var/log/dmesg
The first file /etc/fstab is where which swap partitions are mounted at startup are defined, so if you say you are hanging creating swap partitions that is where to look.
The other files are log files, hopefully there is something informative particularly at the end of them
Rgds - bigdelboy.

Error when booting off install disk: "panic: We are hanging here . . ."

My iBook's working fine except it's very slow (3 years old), so I decided to reinstall the OS.
When I try loading off my original OS X installation disk, it boots to an error "panic: We are hanging here . . ."
If I stick the install CD into the iBook while it's on, it reads the CD fine and even offers to reboot off the CD for me. But when I reboot, I get the same panic error.
When I take the CD out, the iBook loads fine again.
So my computer still works, but I can't figure out a way to reinstall. Any ideas?
fyi- I tried Disk Utility on my HD and it passed verification.

Call Apple Support. They may be able to send you a replacement disc at nominal cost (much less than new). I think you'll need your computer's serial number so they can get the correct one.
How does the computer handle other CDs? There's the slight possibility it is the drive and not the CD.
The other thing to do is to try and troubleshoot why your computer is slowing down and at least not to have to immediately worry about getting a new CD. Here's a bunch of reading. However, I wouldn't blindly go running a bunch of utilities but to address things one by one. For example, one major slow down is an over-full hard drive and no utility will help with that.
[Mac Tune-up: 34 Software Speedups|http://www.macworld.com/article/49489/2006/02/softwarespeed.html]
[52 Ways to Speed Up OS X|http://www.imafish.co.uk/articles/post/articles/130/52-ways-to-speed-up-os-x>
[Tuning Mac OS X Performance|http://www.thexlab.com/faqs/performance.html]
[11 Ways to Optimize Your Mac's Performance|http://lowendmac.com/eubanks/07/0312.html]
[The Top 7 Free Utilities To Maintain A Mac.|http://mac360.com/index.php/mac360/comments/thetop_7_free_utilities_to_maintain_amac>
[Mac OS X: System maintenance|http://discussions.apple.com/thread.jspa?messageID=607640]
[Macintosh OS X Routine Maintenance|http://www.macattorney.com/ts.html#Anchor-31774]
[Kappy's Personal Suggestions for OS X Maintenance|http://discussions.apple.com/message.jspa?messageID=8230024#8230024 ]
[a brody's Topic: Myths of required versus not required maintenance for Mac OS X|http://discussions.apple.com/thread.jspa?threadID=1772235]
[Are the desktops cluttered with files and folders?|http://discussions.apple.com/thread.jspa?messageID=7668937#7668937]
Message was edited by: Limnos
Message was edited by: Limnos

Error When Starting Computer!!

Here is my problem.
Earlier today I used Boot Camp to partition my hard drive so I could install a version of Windows on my computer. Installation wasn't working so I decided to delete that partition and revert back to a Mac OS hard drive (One Partition).
Now when I attempt to restart or startup my computer I get a message saying something along the lines of no bootable device or drive. In order to start my computer (Leopard) I need to restart the computer while holding the option key to select the Mac OSX Hardrive. What do I do to fix this problem.. I want my computer back to the way it was!!

I had the same problem...every time I tried to reboot, a screen came up saying a bootable disk isn't inserted or it went back into XP setup and tried to install it again.
I expected worst-case scenario, I can just put the OS X cd in and boot from there. With it in, it just keeps saying no bootable disk is inserted.
I couldn't get out of that loop, so finally I thought I'd just do whatever I can to get back into OS X to start from scratch...but I couldn't get back in. Not knowing what else to do, I thought if I deleted the partition holding XP from the windows setup it would let me back into Mac OS. (I know it says don't delete/create in windows setup, but I didn't know what else to do).
Did that...didn't work. Now I tried installing windows again, and I keep getting an error that says: "Windows could not start because the following file is missing or corrupt: <Windows root>\system32\hal.dll. Please re-install a copy of the above file"
Obviously I messed something up...
My OS X partition shouldn't be damaged from all this right?? How can I get back in to find out? Holding the option key as I boot doesn't do anything.
It's my first time on a Mac - just got it yesterday. Any tips would be appreciated.
At this point I'm happy to forget windows if it'll just let me back into OS X.

[Solved]Syslinux "booting... boot error" when booting Windows 7

Hello, I've set up my computer to dual boot windows and arch. Windows is on a separate hard drive and I was able to configure syslinux with a boot menu allowing me to select Windows at startup. For a long time this has worked without any problems whatsoever, but this morning I tried selecting windows and I got what is probably the most vague error message I have ever seen.
"Booting...
Boot Error"
According to this post this problem comes in when the ldsyslinux.sys file cannot be found. Unfortunately I was not able to use his suggested fix
syslinux -U /dev/sdb1
I wasn't aware that there was a -U flag for syslinux and after checking it seems that there isn't one.
Last edited by samstr (2014-11-26 04:48:55)

Sorry, I actually just fixed it on my own, it turns out my BIOS settings were a bit... weird. For some reason I didn't have my windows drive listed and it tried to boot a USB drive I had plugged into my computer. I just had to fix the drive order and it worked fine. Sorry about starting a fairly useless discussion.

Error when boot for install from CDs

Hi.
I have Solaris10 distribution on CDs and when I boot from CD and check type of install, I get a error:
WARNING: consconfig: could not find driver for screen device /pci@0,0/pci8086,24,4e@1e/pci8086,1879@c
Can't find driver for console framebufferI have motherboard: Intel Server Board SE7520JR2
Somebody, please, help me with my trouble :((

Have you tried re-transferring them from the computer where they are mounting?
You might try this, too:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

New error when booting up

hi,i keep getting this error popping up when iam booting up my computer.all i did was install another ide hard drive.
(warning! cpu has been changed or cpu ratio change failed.please renter cpu setting in the cmos setup)ive tried to find out where to correct it,but iam unsure.this is my motherboard (pm8m3-v)

Just use the jumper. Disconnect pc from AC outlet, toggle power switch a few times, then set the jumper in the other postition, leave it for a few secs and set it back. Connect PC and try again.
Please do NOT boot your system while the jumper is in the other position.

Error when booting app server for first time

Hi All,
My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV - S PSWATCHSRV :
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha ndler
exec tmshutdown -qy
Any help appreciated.
TUXEDO LOG Says,
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
Edited by: ajith on May 3, 2013 5:39 PM

If not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas.

Receiving strange error when booting up using Windows Vi

[size="3" color="#0000ff">When I boot up on my new desktop that has Windows Vista (32 bit) installed I receive a pop up?windown that has a yellow color triangle with "!" make inside of the triangle (I was unable to copy the the window). The only button to click on is "ok". Why am I getting this and how do I get rid of it's? Please help!!![size="3" color="#0000ff">?[size="3" color="#0000ff">Fustrated in Jersey.

There is a great chance you might need service for that computer. Take a look at the link below and it tells you what the beeps actually mean. Two beeps and a blank screen after your cat knocked over the laptop onto the ground my guess is the system board that might be broken.
http://www-307.ibm.com/pc/support/site.wss/MIGR-46018.html
-gan

Error when booting computer

Similar Messages

Maybe you are looking for