Error when Bridview Starts
Error reads at Bridgeview startup
"Unable to access the CCDB
The application directory has been modified
Correct the directory or restart the application"
Hi,
Did this error came up after a particular event ? This error comes up when you simply launch BridgeView ?
What is the Operating System ?
Andre Oliveira
Similar Messages
-
On my Mac, after the installation i get this error when i start - "Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]"
any ideas how to fix this, i don't know or haven't faound out how to contact Adobe supporet....Here's the contact link for Adobe support. It's just three clicks from the site's home page.
Contact Customer Care -
I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?
If it is the first CS version then you will need to check out the following. I believe it applies to CS as well even though it specifies CS2....
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l -
I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?
What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?
-
Microsoft Visual c++ error when I start Indesign.
Hi
i've got the following error when i start Indesign
did someone already met that issue
Running in windows 7 64
thanks
Gillessee response # 3 from Dov Isaacs in Re: InDesign CC 2014 Crashes on Startup
-
Error when ESR starts - Cannot activate endpoint for message-driven bean
Hi, as already posted on ERROR WHEN START ESR: Cannot activate endpoint for message-driven bean
after an upgrade to PI 7.1 SP11, we got the following error when trying to start ESR, other applications work well:
Application cannot be started!
Details: com.sap.engine.services.deploy.container.DeploymentException: Cannot activate endpoint for message-driven bean sap.com/com.sap.xi.repositoryxml|com.sap.xpi.ibrep.server.jarxml|WorkspaceSyncMessageReciverMDB
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.prepareStart(ContainerInterfaceImpl.java:425)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:219)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:419)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:498)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:554)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3422)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3408)
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:749)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.ApplicationManager.start(ApplicationManager.java:180)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.ApplicationManager.analyseAppStatusMode(ApplicationManager.java:288)
at com.sap.engine.services.servlets_jsp.server.DeployContext.startLazyApplication(DeployContext.java:334)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:103)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:250)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Cannot activate endpoint for message-driven bean sap.com/com.sap.xi.repositoryxml|com.sap.xpi.ibrep.server.jarxml|WorkspaceSyncMessageReciverMDB
at com.sap.engine.services.ejb3.runtime.impl.Actions_MDBEndpointActivation.perform(Actions_MDBEndpointActivation.java:103)
at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
at com.sap.engine.services.ejb3.container.ApplicationStarter.perform(ApplicationStarter.java:59)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
... 34 more
Caused by: javax.resource.NotSupportedException: javax.resource.spi.UnavailableException: Could not activate endpoint for the configured number of attempts
at com.sap.jms.resourceadapter.ResourceAdapterImpl.endpointActivation(ResourceAdapterImpl.java:113)
at com.sap.engine.services.connector.jca15.EndpointActivationImpl.activateEndpoint(EndpointActivationImpl.java:451)
at com.sap.engine.services.connector.jca15.EndpointActivationImpl.findResourceAdapterByName(EndpointActivationImpl.java:154)
at com.sap.engine.services.connector.jca15.EndpointActivationImpl.findAdapter(EndpointActivationImpl.java:85)
at com.sap.engine.services.connector.jca15.EndpointActivationImpl.activateEndpoint(EndpointActivationImpl.java:58)
at com.sap.engine.services.ejb3.runtime.impl.Actions_MDBEndpointActivation.perform(Actions_MDBEndpointActivation.java:95)
... 37 more
Caused by: javax.resource.spi.UnavailableException: Could not activate endpoint for the configured number of attempts
at com.sap.jms.resourceadapter.RaActivation.activate(RaActivation.java:161)
at com.sap.jms.resourceadapter.ResourceAdapterImpl.endpointActivation(ResourceAdapterImpl.java:101)
... 42 more
Caused by: javax.resource.spi.UnavailableException: The destination jms/queue/xi/repository/SWCVSync cannot be looked up. Last attempt performed : jms_vendor_queues_global/jms/queue/xi/repository/SWCVSync
at com.sap.jms.resourceadapter.RaActivation.setupDestination(RaActivation.java:369)
at com.sap.jms.resourceadapter.RaActivation.activate(RaActivation.java:128)
... 43 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SWCVSync.
at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:584)
at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:343)
at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:637)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at com.sap.jms.resourceadapter.RaActivation.setupDestination(RaActivation.java:367)
... 44 more
Thanks.Guys,
I have deployed the below components and after this repository could not be started which gives the below error.
1000.7.11.10.18.20130529165100
SAP AG
sap.com
SAP_XIAF
1000.7.11.10.11.20130529165100
SAP AG
sap.com
SAP_XIESR
1000.7.11.10.15.20130529165100
SAP AG
sap.com
SAP_XITOOL
We have the same issue. Still the Restart did not solve ths issue.
Can anybody help? We are not able to start the XI Repository.
Our PI components are as below
com.sap.engine.services.ejb3.runtime.impl.refmatcher.EJBResolvingException: Cannot start applicationsap.com/com.sap.xi.repository; nested exception is: java.rmi.RemoteException: [ERROR
CODE DPL.DS.6125] Error occurred while starting application locally and wait.; nested exception is:
com.sap.engine.services.deploy.container.DeploymentException: Cannot activate endpoint for message-driven bean sap.com/com.sap.xi.repository*xml|com.sap.xpi.ibrep.server.jar*xm
l|CacheRefreshMDB^M
at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.startApp(DefaultContainerRepository.java:315)^M
at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.getEnterpriseBeanContainer(DefaultContainerRepository.java:106)^M
at com.sap.engine.services.ejb3.runtime.impl.DefaultRemoteObjectFactory.resolveReference(DefaultRemoteObjectFactory.java:55)^M
1000.7.11.10.6.20121015232500
SAP AG
sap.com
MESSAGING
Regards
Omkar -
WLST - error when i start managed server using nmstart() command.
i am receiving an error when start the managed server using nmstart(). Please advise.
Do I have add any parameter to nodemanager.properties file?
Thankyou
pasted below is the error message i am receiving when i start managed server.
Starting server hssclient ...This Exception occured at Thu Mar 19 10:30:02 EDT 2
009.
java.lang.IllegalArgumentException: Invalid host name: Null or empty
at weblogic.nodemanager.client.NMClient.checkNullOrEmpty(NMClient.java:7
2)
at weblogic.nodemanager.client.NMClient.setHost(NMClient.java:79)
at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
Runtime.java:527)
at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
Runtime.java:565)
at weblogic.nodemanager.mbean.NodeManagerRuntime.start(NodeManagerRuntim
e.java:188)
at weblogic.server.ServerLifeCycleRuntime.startServer(ServerLifeCycleRun
time.java:439)
at weblogic.server.ServerLifeCycleRuntime.start(ServerLifeCycleRuntime.j
ava:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean
.java:428)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImp
l.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultM
BeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784
at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBea
nServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:248)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
run(WLSMBeanServerInterceptorBase.java:443)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
oke(WLSMBeanServerInterceptorBase.java:441)
at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterce
ptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:63)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
run(WLSMBeanServerInterceptorBase.java:443)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
oke(WLSMBeanServerInterceptorBase.java:441)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(
SecurityInterceptor.java:426)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor$10$1.run(AuthenticatedSubjectInterceptor.java:582)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor$10.run(AuthenticatedSubjectInterceptor.java:580)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor.invoke(AuthenticatedSubjectInterceptor.java:573)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanSer
ver.java:310)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnecti
onImpl.java:1410)
at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectio
nImpl.java:81)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run
(RMIConnectionImpl.java:1247)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(R
MIConnectionImpl.java:1350)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImp
l.java:784)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown S
ource)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:553)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:443)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:439)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:6
1)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicSer
verRef.java:983)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)Hi I am getting below exception, is nmStart only start AdminServer ????
There are 1 nested errors:
weblogic.management.ManagementException: Booting as admin server, but servername, MS1, does not match the admin server name, AdminServer
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:803)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:493)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Feb 10, 2010 1:45:17 PM UTC> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 8275>
<Feb 10, 2010 1:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
~ -
I downloaded the free trial to test out this program and see if it is worth buying for me. I installed it and everything. When I started the program it told me this was a trial and I click ok. The next pop up says that it works better if it has its own temp folder or something, and do i want to use this folder, so i say yes. It starts to load and as soon as it opens a pop up comes up saying "Shutting Down: To continue working where you left off, please restart Audition" Then it gives me an error. "Runtime Error R6025 - pure virtual function call" It also gives the location of the file C:/programfiles/adobe/audition/auditon.exe
I have tried solutions that I have found online such as:
uninstall QuickTime
clear out %appdata%\Adobe\Audition\3.0
Remove (or rename) C:\Program Files (x86)\Adobe\Adobe Audition 3.0\en_us\ImporterQT.prm
None of these worked for me, I also saw one about a clean reinstall of windows, I don't wanna go through that and I don't think it's worth that. Can anybody help me out?
I am using vista if that helps.I get the restart Audition problem once in a while on my laptop and have
always been able to fix it by reinstalling the 3.0.1 patch, renaming my
C:\documents and settings\(my userid)\application data\adobe\audition\3.0
folder then restarting my computer.
Sometimes I don't have to rename the folder... sometimes I can move the original
folder back and AA still works with my previous settings.
This has happened to me about 3 times.
The patch is here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4237
PS. I'm running XPsp3. I can't recall if this has happened on my recording server.
If it has, it's not more than once. -
J2EE server gives error when i start it.
Hi, I am Fahad. I installed j2sdkee in the directory c:\javalanguage\j2ee\j2sdkee1.3 and j2sdk at
c:\javalanguage\jdk1.3
I am using the latest version of j2sdkee produced by sun and jdk1.3
I have set the JAVA_HOME and J2EE_HOME path as prescribed by the sun.
My platform is Windows2000 professional.
When I start the server writing j2ee it gives me the following list of errors and the server doesnot start.
c:\javalanguage\j2ee\j2sdkee1.3\bin>j2ee
No local string for j2ee.listenPort
J2EE server listen port: 1050
No local string for enterprise.log.logging.serverversion.started
No local string for enterprise.log.using.vm.name.version.from
No local string for enterprise.log.vm's.classpath
No local string for enterprise.log.j2ee.homedirectory
No local string for enterprise.log.loggin.serverversion.started
No local string for enterprise.log.using.vm.name.version.from
No local string for enterprise.log.vm's.classpath
No local string for enterprise.log.j2ee.homedirectory
Redirecting the output and the error stream to the following files:
c:\javalanguage\j2ee\j2sdkee1.3\logs\fahad\j2ee\j2ee\system.out
c:\javalanguage\j2ee\j2sdkee1.3\logs\fahad\j2ee\j2ee\system.err
c:\javalanguage\j2ee\j2sdkee1.3\bin>
I am very tense and trying to start it since two days. Can anybody help me and explain what's wrong with that. thanks
Fahad AhmedHi fahad !
i know this is common problem when u put j2ee.jar from ee sdk to ur local jdk extension ...now wht u have to is ...remove j2ee.jar from ur jdk's extension and restart the system..then simply start jdkee again .. i m sure no error will be waiting for u :)
Truly,
siddiquiHashim
smartSolutions -
HI is there any body?
Perhaps you can tell what error you are seeing. What happens when you start your iPhone.
-
Hi everybody,
I have installed Oracle Identitty Manager 10.1.4 with Multimaster replication, in master node everythings is ok but in node replica when i start oidrepd with oidctl:
oidctl connect=*** server=oidrepld instance=1 flags="-h Hostname-p port" start
and the error is:
sgslupsCheckProcess: sigsend to pid 27220 failed, os error = 3
please, I need help.
Thanks very much.hi,
The oidmon.log show:
sgslupsCheckProcess: sigsend to pid 27220 failed, os error = 3
And oidrepld01.log (this log is when oiddrepd is up but with error is:
* 74 retrys changes queued from instance1 to instance2
* 269 new changes queued from instance1 to instance2
I don't know that i can try it...
Is important for me.
Many thanks in advance. -
Quicktime component errors when I start iMovie' 11 on iMac?? Help.
Getting the following error in iMovie when I open it now. It doesn't seem to be importing movies anymore from my computer.
I removed the imovie APP... into the Trash folder. Redownloaded it from the APP store but it is still giving the same error when
I run it.
How do I fix this... anyone can help me please?
THanksI would suggest reinstalling OSX. You can reinstall from the Restore Partition. (Restart Mac and hold down the Option key)
If this is in the first 90 days, or if you have AppleCare, you can call and have them help you through it for free. -
I'm using "Oracle BI Publisher Template Builder for Word"
Version: 10.1.3.2.1 Build 87
When I try to add <?start:body?> and <?end body?> tags get error in preview to pdf
My structure is:
for-each G_INVOICE
[TABLE WITH HEADER INFORMATION]
<?start:body?>
[for-each G_DISTRIBUTION_LINE
TABLE WITH DISTRIBUTION LINES INFO
end G_DISTRIBUTION_LINE]
<?end body?>
"text for special instructions"
end G_INVOICE
The log generated is:
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: Z:\projects\AEROSTAR\reports\AERO - AP - Disbursal Request\AEROAPDISREQ.xml
FOProcessor setLocale: en-us
oracle.apps.xdo.template.fo.area.NoAvailableAreaException: Not enough rendering area. Please look into the incomplete output file for cause.
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.createNewPage(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.startLayout(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.run(Unknown Source)
at oracle.apps.xdo.template.fo.FOHandler.endElement(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTHandler$EEEntry.sendEvent(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTMerger.startElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
at oracle.apps.xdo.template.fo.FOProcessingEngine.process(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at RTF2PDF.runRTFto(RTF2PDF.java:632)
at RTF2PDF.runXDO(RTF2PDF.java:466)
at RTF2PDF.main(RTF2PDF.java:254)
Please, Need help.
Thanks in advance.The cause for this seems to be that a row in a table is larger than a page, and there is no place left for the Header row.
Check the bellow action plan:
1. Edit the template in MS Word.
2. Click on the table.
3. Right click on the little crossed square in the upper right corner of the table.
4. Click on 'Table Properties' / tab 'ROW'.
5. Look at all rows by using the button 'Next Row'.
6. If 'Repeat as Header at the top of each page' is checked, please uncheck it.
7. Save the template and retry.
BR,
Alex -
I am new to DAQmx and .NET.
In my application I need to activate a clock out on counter 2 (HW pci 16 E 4).
I went through all the steps like the sampling examples but instead of Analog input
I used counter output , and setup the pulse ratios.
When I click the switch in the user interface ( a user control databinded to the clock output)
the output works. Since I need to activate it programmatically I tried to call the daQmxUserControl11.Start()
method but this causes the following error :
An unhandled exception of type 'NationalInstruments.DAQmx.DaqException' occurred in nationalinstruments.daqmx.dll
Additional information: Specified operation cannot be performed while the task is running.
Task Name: DAQmxTask1
Status Code: -200479
Any ideas on what am I doing wrong?
Thanks DavidThanks a lot,
I also discovered that dragging the user control onto my user interface doesn't allow alternate activation.
( I actually tried stopping and then starting but the result was the same )
Calling the routines as indicated in the header comments also gave some hiccups ( I had to remark some code to get the system working progrtammatically.
public void Start()
#region Update UI
this.switch1.Caption = "On";
this.switch1.Value = true;
#endregion
daqmxTask.Start();
public void Stop()
#region Update UI
this.switch1.Caption = "Off";
this.switch1.Value = false;
#endregion
daqmxTask.Stop();
#region Methods
Maybe you are looking for
-
Hi APO Experts, In our project, we have received more sales order inconsistencies which is not clearing by CCR program and it is clearing by program /SAPAPO/SDRQCR21 with option as Build Reqmts from Doc. Flow, So We have decided to schedule the back
-
Please help with connecting a new iMac to an office windows based computer. I have checked everything and neither apple or microsoft support remote connections live.
-
I reacently encountered a problem (water damadge) with my mac 13" keyboard, it was bought in spain, i was wondering if the Western replacement keyboards would fit this MBA since there seems to be not only a diference with the "ñ" key but also with th
-
How to run an Applet using the JDK1.3.1 platform?
I'm a beginner of Java Applet. I've type in the sample program provided in the text book, and compiled it using the jdk1.3.1 platform. Usually we run a java program using java [filename], right? How about running an applet file? What is appletviewer
-
To expand on the problem, I've tried importing a different catalog and I get the same problem so I think the issue is in the application. Also I've tried using different mice and get the same result. Do you think I need to uninstall LR and reinstal