Error when budgeting for Funded Program in FMBBC

Dear All,
I have activated funded program in the spro config : Activate Account Assignment Elements and we wish to use funded program for minor projects. Apart from Funded program, we are using funds center for department budget.
when i budget for funded program in FMBBC along with commitment item I am getting an error as below.
Enter a funds center
Message no. FMKU031
My question is why should I enter funds center, i want to budget for funded program and through derive funded program for budget consumption.
Please advice what steps/configuration must be performed to resolve this as it is stopping testing.
Thanks and regards
Abishay Solomon

Hi,
You must use the following master data elements in Funds Management:
Commitment items
You use commitment items to map out functional units (expenditure and revenue structures) in a hierarchy. They divide up the content of the budget and the business transactions affecting liquidity into revenue items and expenditure items.
Funds centers
You use funds center to represent the organizational units (responsibility areas, departments, projects) of your organization.
See the online help:
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/f0/ca3480260211d28a430000e829fbbd/content.htm]
So, you will need to use Commitment item and Funds Center along with your Funded Program
Kind regards
Mar

Similar Messages

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

BW Statistics-BI7-Error when generating the update program

Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
Regards

Hi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa

Error when generating the update program::::ID RSAU No. 484****

Helllo,
While Infopackage loading for DS 2LIS_04_P_COMP following error is coming.. please see if anyone may face such kind of error.
***Error when generating the update program::::ID RSAU No. 484***
Diagnosis
     An error occurred during program generation for InfoSource
     2LIS_04_P_COMP and InfoProvider ZISPP_C01 . This may be extrapolated to
     incorrect update rules.
Procedure
     Check and correct your update rules and then generate the update program
     again. You can find help on the error in the error log.
amit shetye

hi,
Do a check on the update rules and see if it returns no errors...
if that is the case, then check the short dump and try to get the program name for the update rules..In se38 putting the program name, you can go inside it and do a check there as well if there are any errors....
If in the end yo still dont find anything, try to delete and re-create the update rules..
But i think you will get quite useful info from the dumps if there are any..
hope this helps you..
regrds,
Jadeep

Error when generating the update program

Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
Thanks

Hello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank

Itunes 9.2.1.5 "Error when writing file C:\program files\apple software....

Got an error message when installing itues 9.2.1.5 "Error when writing file C:\program files\apple software update\softwareupdate.exe you do not have admin right to read/write the menu." "寫入檔案時發生錯誤 C:\program files\apple software update\softwareupdate.exe 你沒有權限存取目錄"
There is no "apple software update" folder in my C:\program files\
I tried to uninstalled all apple related software, restart the computer and reinstall the itunes, I still get this error message.
It appears that the installation of quicktime was successful.

After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists

Error when searching for entries in secure store

Hi All,
I need to assign the certificate in the sender agreement for signature verification and decrpting. So when i search for entries, i am getting the error as " Error when searching for entries in Secure Store".
Details of the Error is showing as:
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
What is the reason for the above error and how to rectify it..?
Suggest some useful solution
Regards
Prakash

Hi All,
Can anyone suggest some ways to rectify the error, as i am not able to find solution for the error in the
forum.
Regards
Prakash

Float4() causes "error saving Pixel Bender Byte Code file" error when exporting for flash player

Simple test
<languageVersion : 1.0;>
kernel untitled
< namespace : "Your Namespace";
 vendor : "Your Vendor";
 version : 1;
>
 input image4 src;
 output pixel4 dst;
 void
 evaluatePixel()
 dst = float4(sampleNearest(src, outCoord()));
The above code will produce a "error saving Pixel Bender Byte Code file" error when exporting for flash player in Pixel Bender Toolkit 2.5.449694.
"dst = (sampleNearest(src, outCoord()));" works fine. And anything like "float4 a= float4(b);" will give same error.

Thank you for the error report. I'll put it into our bug database. We're bottling things up for the current version. Gven the workaround, it is unlikely we'll be addressing this bug soon. Please accept my apologies for the annoyance this will cause.
In your second example, float4 a = float4(b), does it return an error if b is only a float4 or regardless of what b is? If b is a scalar float, for example, is the conversion performed correctly? If so, this could be an error that only crops up when using constructor/conversion syntax when the thing being converted is already the correct type.
Thanks,
Chuck.

VCS Expressway event log errors when Jabber for iPhone and Windows log in

hi folks,
I've deployed Collaboration Edge with VCS Control and Expressway:
my Jabber for iPhone succesfully can log in from Internet and it can IM but not calls and I see next messages in VCS Expressway when Jabber is logging in:
2015-03-27T18:00:28+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49543" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 16:00:28,204"
2015-03-27T17:58:55+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49535" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:55,786"
2015-03-27T17:58:32+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49527" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:32,202"
2015-03-27T17:58:08+02:00
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49512" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 15:58:08,582"
"Digest User" in the "Protocol Specific Information" section of Phone Configuration selected right user. in this Jabber I see following error "Failed to get device configuration". however Jabber for Windows and for Android hasn't such issues - they succesfully can log in from Internet and it can do calls and IM but I see next messages in VCS Expressway when Jabber is logging in. The same log line appears when Jabber for Android log in:
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="56751" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 14:19:11,769"
and I can't find any information which describe such types of error.
thanks!

Thanks Srini, but the instructions have two options:
1. Use the Control Panel, select "Oracle 11g..." and uninstall from there.
This is of course the first thing I tried, but as I said, there is no entry for Oracle 11g in my "Programs and Features" applet.
2. Download the install package and run OracleXE.exe with the remove iss file.
Firstly, there is no OracleXE.exe in the package I downloaded, just setup.exe;
Secondly, setup.exe ignores the iss parameter and tells me that OracleXE is already installed (setup.log contains ResultCode=-3) so it can't be installed.
Is there somewhere else to get an OracleXE.exe that will work for 11g? Or are these the instructions for 10g and haven't been updated yet?
Am I unusual in not having a Control Panel entry?
(and I understand this is a beta - that's partly why I'd like to uninstall it - I'll go back to 10g and not be so impatient :))
Regards,
Andrew

Keep getting this error when I run a program UC_OBJECTS_NOT_CONVERTIBLE

I created a project via CMOD for a modification to a BW extractor. It is pretty simple coding but when I try and execute the extractor via RSA3 I get the following error. I've attached the code as well and it is something with line 17. can you please help
Short text
 Data objects in Unicode programs cannot be converted.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "SAPLXRSA" had to be terminated because
 come across a statement that unfortunately cannot be executed.
Error analysis
 The statement
 "MOVE src TO dst"
 requires that the operands "dst" and "src" are convertible.
 Since this statement is in a Unicode program, the special conver
 rules for Unicode programs apply.
 In this case, these rules were violated.
Trigger Location of Runtime Error
 Program SAPLXRSA
 Include ZXRSAU01
 Row 17
 Module type (FUNCTION)
 Module Name EXIT_SAPLRSAP_001
Source Code Extract
Line SourceCde
 1 *&----
 2 *& Include ZXRSAU01
 3 *&----
 4
 5 TABLES: VTTK.
 6 DATA: L_MCCOMVTTS LIKE MCCOMVTTS,
 7 L_TABIX LIKE SY-TABIX.
 8
 9
 10
 11 CASE I_DATASOURCE.
 12
 13 WHEN '2LIS_08TRTLP'.
 14
 15 *FIND TDLNR & VSART IN THE SHIPMENT HEADER TABLE
 16
>>>>> LOOP AT C_T_DATA INTO L_MCCOMVTTS.
 18 L_TABIX = SY-tabix.
 19 SELECT SINGLE * FROM VTTK WHERE TKNUM = L_MCCOMVTTS-TKNUM.
 20
 21 *FILL FIELDS WITH DATA FROM VTTK(SHIPMENT HEADER TABLE)
 22 IF SY-SUBRC = 0.
 23 L_MCCOMVTTS-Z_TDLNR = VTTK-TDLNR.
 24 L_MCCOMVTTS-Z_VSART = VTTK-VSART.
 25 MODIFY C_T_DATA FROM L_MCCOMVTTS INDEX L_TABIX.
 26 ENDIF.
 27 ENDLOOP.
 28 ENDCASE.

ra you sure the
table C_T_DATA and the work area L_MCCOMVTTS have the smae fileds with same data element .
i think somewhere ther is adifference that why systerm is umable to populate the table data in to work area..
i have observed that C_T_DATA is not defined any format..
Make sure u have the same structure for the work area as well
Please Close this thread.. when u r problem ise solved
Reward if Helpful
Regards
Naresh Reddy K
Message was edited by:
 Naresh Reddy

Error when compiling the upload program (Message no. RSAR233)

Hello,
I tried to upload data from a flatfile but I did modified the Comm.Structure, Trans.Structure and Transfer Rules.
After activating the all changes, I check data from InfoPackage by previewing it. Unfortunately, I got the follow messages from the popup window:
Error 8 when compiling the upload program: row
227, message: Data type /BIC/CCABTWJI_STK01 was
found in a newer
I got this kind of problems many times. I solved it by create a new infosource and everything again. I don't think it's good idea to do this way.
Any better solution would be sincerely appreciated?
-WJ-

Another solution:
go out the transaction RSA1 ans return to the transaction RSA1 again.
This would help for me without restarting anything.
Thank you very much for all suggestion.
-WJ-

Error when compiling for IOS

When compiling for IOS in Standard mode an error ocurred:
Error occurred while packaging the application:
Exception in thread "main" com.adobe.air.ipa.ProcessError: Assembler failed
          at com.adobe.air.ipa.AOTCompiler.launchProcess(AOTCompiler.java:263)
          at com.adobe.air.ipa.AOTCompiler.compileBitcode(AOTCompiler.java:935)
          at com.adobe.air.ipa.AOTCompiler.trimAndCompileBitcode(AOTCompiler.java: 763)
          at com.adobe.air.ipa.ASMGenerator.main(ASMGenerator.java:72)
Compilation failed while executing : ADT
Flex 4.6
Windows 7
Any idea?

Sinious thanks for your answer.
I tried compiling from adt and it worked using this command line script.
@set java_cmd="C:\Program Files\Common Files\Adobe\Adobe Flash CC\jre\bin\java.exe"
@set java_param=-Xmx8192m -jar
@set adt_cmd="C:\Program Files\Adobe\Adobe Flash CC\AIR4.0\lib\adt.jar"
@set target=ipa-test
@set cert=samples.p12
@set cert_pass=12345
@set provisioning=samples.mobileprovision
@set build_file=Testing.ipa
@set desc_files=Testing-app.xml
@set files=Testing.swf assets externalSWF
%java_cmd% %java_param% %adt_cmd% -package -target %target% -storetype pkcs12 -keystore %cert% -storepass %cert_pass% -provisioning-profile %provisioning% %build_file% %desc_files% %files%
pause
Still there is now a different problem.
When trying to compile more than a certain number of external swfs (eg. 350) then the process never ends. The java.exe process consumes all of my memory and it is just stuck there for hours( I've waited for it to compile for nearly 10 hours before I killed the java.exe process). When I randomly remove some swfs then everything goes fine and the process finishes after nearly half an hour or so.
The pc i'm using has an i7 processor with 16gb of ram and the java process consumes it all even though i've set a limit using the -Xmx8192m command.
Is there a problem with the xmx command?
Do i need even more ram to compile a larger number of swfs.
Is there a way to monitor the java process in order to catch any errors that occur or maybe use any different java params to control ram usage limits?
Thank you for your help.

XML Template could not find error when submitting for other than English

Hi All,
When I try to submit my custom xml report through SRS window, in NON english language, I get following error
"The simultaneous application program could not find an xml template for the program. Check the configuration of the data and information medianate template for the program administrator the responsibility to xml editor" --- (Transalted from spanish message by me)
and then giving FRM-41072:can not create the group req_layout
error.
I have other xml report for which I have no this type of problem
Please help me.
Edited by: DharV on Oct 30, 2011 10:42 PM

Hi,
I have a template created using UI Shell and have 2 fragments being used as a dynamic region. So far so good. All is well and when i run the application i can see the regions.
Don't know what this has to do with the problem and its solution. Its confusing.
Now i created a custom template (.jspx) file and tried to use the same fragments in this template.
Assume you meant that you used the same task flow reference - correct ?
If you set definition="public" , does it make a difference ?
Frank

Error When Prompting for Substitution Variable

Hi - I'm receiving an error when I try to run the following using the substitution variable - but only when I enter a string; when I enter a numeric value it runs fine.
DECLARE
    l_SCR_Info            VARCHAR2(50) := '''SCR'||&SCR_NUM||'-'||'''';
begin
dbms_output.put_line(l_SCR_Info);
end;Here is the error I receive when I supply a string value when prompted:
ORA-06550: line 3, column 52:
PLS-00201: identifier 'AB' must be declared
ORA-06550: line 3, column 27:
PL/SQL: Item ignored
ORA-06550: line 10, column 22:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 10, column 1:
PL/SQL: Statement ignoredCan anyone shed some light on what I'm missing here?
Thanks!
Christine

Hi,
It looks like you just want one string there:
l_SCR_Info            VARCHAR2(50) := '''SCR&SCR_NUM-''';Remeber how substitution variables work: SQL*Plus replaces them with values before sending the code to the back end to be compiled.
If you give a value like AB for the variable, the code you posted is equivalent to:
     l_SCR_Info            VARCHAR2(50) := '''SCR'|| AB ||'-'||'''';by the time it reaches the compiler. AB is not inside quotes, so the compiler looks for a variable or function called AB.
If you gave a number:
     l_SCR_Info            VARCHAR2(50) := '''SCR'|| 123 ||'-'||'''';there's no problem; the compile knows what the literal number 123 is.

Error when running workflow inititiation program

Hi,
I get the following error when I try to run my java application which initiates
a BPM workflow.
<Nov 28, 2001 3:21:32 PM PST> <Error> <B2B> <<WLC-WLPI-Plugin> ERROR: WLC-WLPI
p
lugin must be initialized before creating workflow instances>
Exception occured: com.bea.b2b.wlpi.WLPIException: ERROR: WLC-WLPI plugin must
be initialized before creating workflow instances
I could not find any documentation on how to perform this step. Can anyone please
help. I have also attached this program.
--Krish.
[PIP3A2_Customer_RN2.java]

Yes the B2B server is started and running. I see these two final messages which
I believe is the indication that the server is up and running.
Initialized WebLogic Integration Plugin Framework version 2.1
Started WebLogic Integration - BPM Server version 2.1
--Krish.
"Adrian Price" <[email protected]> wrote:
Are you sure the server has finished starting up? You should see a console
message about WebLogic Integration 2.1 started when it is ready to service
client requests.
"Krish Khambadkone" <[email protected]> wrote in message
news:3c057360$[email protected]..
Hi,
I get the following error when I try to run my java application whichinitiates
a BPM workflow.
<Nov 28, 2001 3:21:32 PM PST> <Error> <B2B> <<WLC-WLPI-Plugin> ERROR:WLC-WLPI
p
lugin must be initialized before creating workflow instances>
Exception occured: com.bea.b2b.wlpi.WLPIException: ERROR: WLC-WLPIplugin
must
be initialized before creating workflow instances
I could not find any documentation on how to perform this step. Cananyone
please
help. I have also attached this program.
--Krish.

Error when budgeting for Funded Program in FMBBC

Similar Messages

Maybe you are looking for