Error when building a report from 2 different subject areas

Hello Experts,
I am using obiee 11.1.1.5.
I have 5 dimension D1,D2,D3,D4,D5 connected to fact1 and 4 dimension connected to fact2 such as D1,D2,D6,D7.
where D1,D2 is common to both the facts.
Fact1 Is in subject area 1 and Fact2 is in subject area2.
I need to create a report by adding columns of subject area 1 and 2 with columns from all the dimensions D1,D2....D7.
As of now i am getting error stating "No fact table exists at the requested level of detail " when i try to add columns from 2 different subject areas.
Can anyone help me in solving the above problem.
Is there any prerequisite to be taken care when building a report from 2 different subject areas.
Regards,
NN

Hello Nagireddy,
So kind of you, for your quick reply
I was able to solve the error by doing below steps in additional what you have specified
-->For the fact table LTSs, set the logical level in the Content tab to the dimension's lowest level for each conforming dimension (leave the non-conforming dimensions level blank).
Now I have another requirement i,e
I need to have non measure columns such as Date into the newly created fact in BMM layer.
I tried doing the steps which I followed for measure column, but it is throwing the same error which I get earlier.
Below is the error
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail:
Let me know if have any suggestions

Similar Messages

Passing a value from Report A to B when B is in a different Subject Area

I had posted a question previously on how to pass the Dept # from Report A to B when B i in a different Subject Area. The question was:
Report A is a table on the Dashboard that shows Actual vs Budget results by Department. I want the user to click on the Department and be navigated to report B that shows the detail transactions that make up the Actual results. Report A and B are from different underlying subject areas. Thus when I navigate to report B, I see ALL departments, and not the one I clicked on in Report A to bring up Report B. How can I limit the results in Report B to be just the respective cell I clicked on in Report A?
I got great advice from Nico on how to use the GO URL, but I can only get that to work if the 2 reports in question are from the same data model. In my case they are NOT.
The GO URL seems to be working, as it does open up Report B when I click on the Department field in Report A, but it does not pass the Department number to Report B, even though reprot B has that field "as prompted".
Can anyone definitively indicate whether what I'm trying to do is not possible in BI EE?

Read this from Venkat... I think this will be helpful in understanding prompts, both the column prompts (Answers) type and the dashboard prompts. Very useful, I think.
http://oraclebizint.wordpress.com/2008/04/30/oracle-bi-ee-101332-understanding-dashboard-prompts-passing-prompts-to-multiple-subject-areas-aliases/

Report from multiple subject areas

Hi,
I need to create a report from multiple subject areas. I am not sure whether it;s possible in OBIEE answers.
Is there any other tool from OBIEE suite where I can design it?
Thanks

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

Navigate to BI content. Report in different Subject Areas

I have a requirement where I have to navigate to a detailed level report when I click on the column. When I place the reports in the same subject area it works absolutely fine. But according to the requirement the reports cannot be in the same subject area. So when I click on the column, all the filters on the dashboard prompts pass through the main report in SubArea1 to Detail Report in SubARea2 but the attribute value that clicked on does not pass through as a filter. I see all teh records at a detailed level and not just that attribute's records.
We are trying to implement 'Navigate to BI content' Action link from one report to another.
Both these reports are not in the same subject area (Presentation layer) though. How can be make OBIEE pass the appropriate filters to show only the needed subset of data in the second report.
This is needed for our CL, PL and Agency details report. The dashboard is from one subject area, the detail report is from another subject area. We now want to pass what the user clicked in one to the other. Please note that the dashboard prompts would get passed correctly. It is only the 'attribute' on the left side that would not.

All the columns whose values you want to pass to the detail report should be prompted in detail report and the column names should be same.
For example
If you are clicking on Period.Year column in master report then the detail report should have Period.Year column is prompted.
Subject Areas may be different but the presentation table name and column name should be different.
Thanks

Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

Hi,
We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW. Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
"An error occurred while saving and / or publishing. The return code 1 was returned from the server. Logon to Crystal Enterprise failed. Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : Duplicate object name in the same folder."
We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
Any ideas?
Thanks,
Josh
Edited by: Josh Crawford on May 10, 2010 9:46 AM

Ingo,
Apologies for the delayed response. We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports. If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error. If we Save & Publish without the Translation flag selected, everything is fine.
There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
If we come across the problem again, I'll post again.
Thanks,
Josh

Rep-52005 error when running a report from form with parameter form

I am trying to run a report from a web deployed form and this report has a parameter form. I am getting a Rep-52005: The specified key report does not exist in key map file.
I am using Oracle Forms/Reports 10.1.2.0.2. My code is below. The first part works fine where I run a report with no parameter form, but the second part when I have a parameter form gets the about error.
PROCEDURE call_report (
p_report_name VARCHAR2,
p_reportobj_name VARCHAR2 DEFAULT NULL,
p_parameter_list paramlist DEFAULT NULL,
p_parameter_string VARCHAR2 DEFAULT NULL
IS
repid report_object;
v_rep VARCHAR2 (100);
rep_status VARCHAR2 (100);
v_report_url VARCHAR2 (240);
v_interface VARCHAR2 (50);
v_report_parameter VARCHAR2 (1);
vc_user_name VARCHAR2 (100);
vc_user_password VARCHAR2 (100);
vc_user_connect VARCHAR2 (100);
vc_connect VARCHAR2 (300);
v_reportserv VARCHAR2 (30);
v_job_number number;
BEGIN
/* Get the database to run the report against and
find out if the report has any parameters */
SELECT report_parameter_flag
INTO v_report_parameter
FROM program_list
WHERE program_type = 'REPORTS'
AND UPPER (screen_id) = UPPER (p_report_name);
vc_user_name := get_application_property (username);
vc_user_password := get_application_property (password);
vc_user_connect := get_application_property (connect_string);
v_reportserv := 'rep_xxxx_ias10g_home';
v_report_url := 'http://xxxx.state.il.us';
v_job_number := length(v_reportserv) +2;
vc_connect :=
vc_user_name
|| '/'
|| vc_user_password
|| '@'
|| vc_user_connect;
v_interface := get_application_property (user_interface);
IF ( v_interface = 'WEB'
AND v_report_parameter = 'N'
THEN
repid := find_report_object(p_reportobj_name);
set_report_object_property (repid, report_comm_mode, synchronous);
set_report_object_property (repid, report_destype, cache);
set_report_object_property (repid, report_desformat, 'pdf');
-- v_reportserv := get_report_object_property (repid,report_server);
set_report_object_property (repid, report_server, v_reportserv);
set_report_object_property (repid, report_other, p_parameter_string);
v_rep := run_report_object (repid);
rep_status := report_object_status (v_rep);
IF rep_status = 'FINISHED'
THEN
web.show_document (
v_report_url
|| '/reports/rwservlet/getjobid='
|| substr(v_rep,v_job_number)
|| '?server='
|| v_reportserv
,'_blank'
ELSE
message ( rep_status
|| 'Report output aborted');
END IF;
ELSIF ( v_interface = 'WEB'
AND v_report_parameter = 'Y'
THEN
repid := find_report_object (p_reportobj_name);
set_report_object_property (repid, report_comm_mode, synchronous);
set_report_object_property (repid, report_destype, cache);
set_report_object_property (repid, report_desformat, 'pdf');
set_report_object_property (repid, report_server, v_reportserv);
set_report_object_property (
repid,
report_other,
'paramform=yes P_USER_CONNECT='
|| vc_connect
|| ' P_SERVERNAME='
|| v_reportserv
|| ' P_ACTION='
|| v_report_url
|| '/reports/rwservlet'
v_rep := run_report_object (repid);
rep_status := report_object_status (v_rep);
IF rep_status = 'FINISHED'
THEN
web.show_document (
v_report_url
|| '/reports/rwservlet/getjobid='
|| substr(v_rep,v_job_number)
|| '?server='
|| v_reportserv
,'_blank'
ELSE
message ( rep_status
|| 'Report output aborted');
END IF;
ELSE
run_product (
reports,
p_report_name,
synchronous,
runtime,
filesystem,
p_parameter_list,
NULL
END IF;
EXCEPTION
WHEN OTHERS
THEN
message (SQLERRM);
END;
My parameter form comes up and I enter the necessary information and hit submit query button. Then I get the Rep-52005: The specified key report does not exist in key map file.
Any help will be greatly appreciated!!
Shellie Bricker

Your code seems to be implementing metalink note 139546.1 - Using Reports parameter forms with RUN_REPORT_OBJECT on the web.
For what I can see, the P_ACTION parameter should end in ?...
i.e.
P_ACTION=http://<hostname.domain:port>/reports/rwservlet?'
set_report_object_property (
repid,
report_other,
'paramform=yes P_USER_CONNECT='
|| vc_connect
|| ' P_SERVERNAME='
|| v_reportserv
|| ' P_ACTION='
|| v_report_url
|| '/reports/rwservlet?'
);If this does not fix your problem, then to troubleshoot further you would have to post the code in your Before Parameter Form trigger of your report.
Hope this helps,
UPDATE:
If the above does not fix your problem, my guess is that report name is not being generated in the hidden runtime values build by the code in the Before Parameter Form trigger.
i.e.
http://localhost:8889/reports/rwservlet?report=&destype=cache&desformat=PDF
The above code will throw error REP-52005: The specified key report does not exist in key map file.
Edited by: Rodolfo Ferrari on Jul 8, 2009 9:43 PM

Error when connecting to MDM from different lan

Hi,
I got "Image Server Login Error" when connecting with client to server from different LAN, server is up, and i can connect to it when i in the same LAN. Ports 20003, 20004, 20005 for MDM server discovering and repository port 2345 is accessible through router. Running SP2 5.5.24.06.
Rem: it's not a port problem, when port 2345 is closed i got "WinSock error on connect"
PS: When I used MDM SP1 i connected to him properly in the same case.

Hi Dmitry,
If your repository is set to port 2345, then 4 subsequent ports should be openned also, i.e. 2346-2349.
Regards, Lev

Error when loading the Reports from the IC Manager

Dear CRM Gurus,
i am getting the below error message when trying to access the Reports from the IC_MANAGER role
'Error loading template 0TPLI_CSRV_T01_Q0001_V01'
and
Technical Information for Message:
(Error loading template 0TPLI_CSRV_T01_Q0001_V01
Notification Number BRAIN 276 )
i am completely stuck here
can anyone help
Thanks and Regards,
Raj

The reports are coming from BI, so do you have a BI enviromment with the extractors from CRM pulling the data ........

Error when Saving FR Report from Studio when Making Changes from Client PC

We get the following error when trying to save a report when using FR Studio from a Client PC: *"Expecting a transferable end, but received -4352: 2067198, expected: -4113, <-4098>, 8074 -4098"*. We do not get this error if we so a Save As instead of a Save.
If we use FR Studio while remoted into the FR server, we do not get this error.
Any idea what may be the cause of this error message?
Thanks.
Terri

We had a similar issue on 11.1.2, which was never really resolved. Is this the version you are on?

Error when calling a report from Server?

We have a .NET application on the server and we want to call a crystal report (.rpt) from one of the forms (.NET aspx page). We are getting below error. The report works fine on the desktop where it is developed. Please let us know if there is any specific process to move the reports to server. Any help is appreciated.
The report is developed in Crystal Reports 2008 and we are using Visual Studio 2005. We are using Crystal Report Viewer control to call / associate the report developed.
Error message,
An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Thanks
Sridhar
Edited by: Sridhar Thodupunoori on Dec 4, 2008 4:13 PM

Hi,
It seems that you are having issue with Crystal reports .Net SDK's.
Post your question in Crystal Reports .NET SDK forum.
That forum is monitored by qualified technicians and you will get a faster response there. Also, all .NET SDK queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Amit

Authorization error when running a report from the portal

Hello,
I am trying to run a certain report under a certain user in the portal.
If I run this report with this user from the BW it is working but if I run it from the portal with this user it doesn't. The error I receive in the portal is this:
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Errors while reading InfoProvider data
ABEND: Error in BW:
ABEND: You do not have authorization for the data transfer process
Which other authorizations the user needs?

Hey Roy,
Check with the User Portal Roles and all Authorization Objects in BW.
when we talking about Portal from BW - Is is URL portal or RFC Portal?
Thanks,
CP

Error when generating XL Report from Report Organizre

Dear Experts,
I get this error msg, and it happens to a particular XL Report only, other reports are Ok.
Even so, I dont know hwats wrong if this report. Does anyone know what could have caused this error and what has gone wrong in my report?
[Click here to view screenshot|http://www.flickr.com/photos/45736280@N07/4887239349/sizes/l/in/photostream/]
Warmest Regards,
Chinho

Dear Chinho,
I got this kind of problem before. However it may be caused by different problems. Since it is already start writing the report, it means no problem with the grammar. You may change this report by deleting certain field to troubleshoot.
Thanks,
Gordon

Chart with data from different subject area

What I want to draw in a single chart is the following (I made this up just to show my requirement)
-The number of accounts by month (a line chart)
-The number of activities by month (bar chart)
Not all accounts necessary have any activity in a month.
In excel I can have two data streams and I can use two Y-axis to present the two different data streams (# of accounts, # of activities). Is it possible to do this in Analytics? I look at the chart setup. It seems there is only one Y-axis. Is that the case?

You can have 2 Y axis. Try the 3d charting mechanism and you may want to try a chart from a pivot stand point.

Report from different connection pools

Hi All
My requirement is as below.
When USER1 logs in and builds a report from a subject area then the data is fetched from connection_pool1 and when user 2 logs in and builds the same report then data is fetched from connection_pool2.
The data are in identical table structures in both connection pools but for user2 there is a restriction on the volume of data hence can this dynamic feature be implemented? and How.
thanks
swastik

We cannot do this dynamically,We need to change this manually
Connection Pool ---- Permissions
Mark if helps,
Thanks,

Report using colmns from 2 subject areas

Hi,
I have to buld a report as below
Product      ForecastRevenue(A)       ActualRevenue(B)       Variance
A                200                                      100                           100
B                200                                      200                            0
ForecastRevenue(A) comes from 1 subject area and ActualRevenue(B) comes from another subject area. Using these 2 columns from different subject area I have to create
a calculated column variance which is the difference of two columns. How can I create this report. Any idea?

can be done in two ways;
1. Using Union report
Create a union report with two request.
Request1 -          product               Forecast_Revenue     Actual Revenue
Col expression     "product.name"     "Fact.Revenue"         0
Request2 -          product               Forecast_Revenue     Actual Revenue
Col expression      "product.name"    0                             "Fact.ACTUAL_Revenue"
In the result tab create a pivote report and set the aggregation of fact column as sum.
Add a calculated column and write the expression as
Farecast_Revenue - Actual_Revenue
You are done.
2. Use the advance tab in the report and write a custom SQL to join these two subject area.
eg.
select product, A.forecast_reveneu, B.Forecast_Reveneue, A.forecast_reveneu-B.Forecast_Reveneue
from SA1 A join SA2 B on (A.product=B.PRODUCT)
You are done.
Best of Luck,
Kashi

Error when building a report from 2 different subject areas

Similar Messages

Maybe you are looking for