Error when building lightdm-unity-greeter
Hi,
I built Unity from git last night, and today I've failed to make lightdm-unity-greeter with this error:
make[2]: Entering directory `/home/isolet/Unity-for-Arch-Extra/lightdm-unity-greeter/src/unity-greeter-13.10.2/src'
VALAC unity_greeter_vala.stamp
fixes.vapi:4.5-4.33: error: `Posix' already contains a definition for `MCL_CURRENT'
public const int MCL_CURRENT;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
posix.vapi:2308.2-2308.30: note: previous definition of `MCL_CURRENT' was here
public const int MCL_CURRENT;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
fixes.vapi:6.5-6.32: error: `Posix' already contains a definition for `MCL_FUTURE'
public const int MCL_FUTURE;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
posix.vapi:2310.2-2310.29: note: previous definition of `MCL_FUTURE' was here
public const int MCL_FUTURE;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
fixes.vapi:8.5-8.23: error: `Posix' already contains a definition for `mlockall'
public int mlockall (int flags);
^^^^^^^^^^^^^^^^^^^
posix.vapi:2312.2-2312.20: note: previous definition of `mlockall' was here
public int mlockall (int flags);
^^^^^^^^^^^^^^^^^^^
fixes.vapi:10.5-10.25: error: `Posix' already contains a definition for `munlockall'
public int munlockall ();
^^^^^^^^^^^^^^^^^^^^^
posix.vapi:2314.2-2314.22: note: previous definition of `munlockall' was here
public int munlockall ();
^^^^^^^^^^^^^^^^^^^^^
Compilation failed: 4 error(s), 0 warning(s)
make[2]: *** [unity_greeter_vala.stamp] Error 1
make[2]: Leaving directory `/home/isolet/Unity-for-Arch-Extra/lightdm-unity-greeter/src/unity-greeter-13.10.2/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/isolet/Unity-for-Arch-Extra/lightdm-unity-greeter/src/unity-greeter-13.10.2'
make: *** [all] Error 2
The configure log seems nothing goes wrong:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for valac... /usr/bin/valac
checking whether /usr/bin/valac is at least version 0.20.0... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.16... yes
checking for UNITY_GREETER... yes
checking whether NLS is requested... yes
checking for intltool >= 0.35.0... 0.50.2 found
checking for intltool-update... /usr/bin/intltool-update
checking for intltool-merge... /usr/bin/intltool-merge
checking for intltool-extract... /usr/bin/intltool-extract
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.18.1
checking for XML::Parser... ok
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating data/Makefile
config.status: creating po/Makefile.in
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing po/stamp-it commands
Since I'm new to Arch and not that familiar with C/C++ compiling, can somebody help take a look at this and give me some ideas ?
Your help will be greatly appreciated!
Last edited by isolet (2013-10-16 03:09:02)
hi everybody from the Indian Ocean , especially Rodrigues Island-Republic of Mauritius !
I am now running a Archlinux Vm with 3 desktop environemnts such as Gnome, Mate and Xfce4 . I am encounting a conflict file issue between lightdm , lightdm-Ubuntu and lightdm-gtk-greeter.conf !
The system says that lightdm-gtk-greeter.conf creates a conflict and , when installing Unity as per " chenxiaolong :https://github.com/chenxiaolong/Unity-for-Arch" or through the Wiki method I am always stuck ! I don't even have the " /usr/share/glib-2.0/schemas/com.canonical.unity-greeter.gschema.xml" ! The nearest I've got is " com.canonical.unity-gtk-module.gschema " ! This means that even lightdm-ubuntu-greeter cannot be installed ......What must I do ?
Similar Messages
-
[SOLVED] Cannot change the lightdm-unity-greeter background
Hi.
So I installed the lightdm-ubuntu and lightdm-unity-greeter (which needed lightdm-ubuntu) from the AUR, and when I read both the wiki and the web, they said that I needed to install the lightdm package, not lightdm-ubuntu (when I install lightdm-ubuntu, it conflicts with lightdm, forcing me to remove it). So I installed it, used it, saw the nice login screen, but I would like to remove the dots showing up over the background AND change the background. I read that there is a config in the /etc/lightdm folder, but when I tried finding it, it was not there.
ls /etc/lightdm showed me:
keys.conf lightdm-gtk-greeter.conf users.conf
lightdm.conf lightdm-gtk-greeter.conf~
lightdm.conf.pacsave lightdm-gtk-greeter.conf.pacsave
I do not want to have the background of the login the same as my background when I'm logged in, so I don't think gnome-settings-daemon-ubuntu and accountsservice-ubuntu should be needed. And even if they are, I would like to find a way to change it without installing those packages, since I can't install them easily -- this computer is a school computer and is connected through a filter, which unnecessarily blocks many sites (like say, eclipse.org and gnu.org, but that is not the point), and freedesktop.org is one of them.
I would appreciate if anyone knows how to do that.
Thanks.
EDIT: Solved. faidoc's answer was priceless.
Last edited by Technicolor (2012-10-04 13:54:05)hi everybody from the Indian Ocean , especially Rodrigues Island-Republic of Mauritius !
I am now running a Archlinux Vm with 3 desktop environemnts such as Gnome, Mate and Xfce4 . I am encounting a conflict file issue between lightdm , lightdm-Ubuntu and lightdm-gtk-greeter.conf !
The system says that lightdm-gtk-greeter.conf creates a conflict and , when installing Unity as per " chenxiaolong :https://github.com/chenxiaolong/Unity-for-Arch" or through the Wiki method I am always stuck ! I don't even have the " /usr/share/glib-2.0/schemas/com.canonical.unity-greeter.gschema.xml" ! The nearest I've got is " com.canonical.unity-gtk-module.gschema " ! This means that even lightdm-ubuntu-greeter cannot be installed ......What must I do ? -
Error When building ess/tra/tre and ess/tra/tre/trs DC's
I had customized the ess/tra/tre and ess/tra/tre/trs DC's and had them working, but I do not know what I did or what happened that am now getting the following errors when building, can anyone help tell what the problem could be?
Error
- The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.xss.tra.model.openccmodel.OVSOpenCostcenterModel. Fix the classpath then try rebuilding this project.
- HDI_HNS15.02_Desstratresap.com
Error
- This compilation unit indirectly references the missing type com.sap.xss.tra.model.openccmodel.OVSOpenCostcenterModel (typically some required class file is referencing a type outside the classpath)
- InternalVcTreReview.java
- HDI_HNS15.02_Desstratresap.com/gen_wdp/packages/com/sap/xss/tra/tre/vc/review/wdp
- line 0For anyone who might need to know, I managed to fix this by adding tra to the required projects on the build path. On the Navigator View, right click -> Properties -> Java Build Path -> Projects tab -> check dependant project.
-
Icon path restricted error when building release version for ipad3
Hi,
i get the following error when building the release build ipa file for ipad 3: "The path icon.png is restricted. If you were trying to package Icon.png you should correct the case." In debug mode everything works. My icon is under assets folder and added in the app-xml with:
<icon>
<image72x72>assets/icon_72.png</image72x72>
</icon>
Did I missed something in configuration? Seems to be that the problem is known but cant find a solution for it. If i try to packegae per command line despite the fact building works I could not install the app. When I change the icon tag to use no icon everything works fine. Any ideas?
Greetz and thanks in advance!I solved it. When you export the release build you can choose package contents to be compiled in the ipa. When I tried to add an icon at first I named it icon.png, which seems to be a reserved name. The configuration to include this icon.png was still saved though i deleted it. Wired... After unchecking the ceckbox for icon.png not to be compiled in the ipa, the release build was build.
-
I get a "vi is not executable" error when building an application.
I have an ongoing project that has worked fine in the past when building an application. I have recently added some report generation toolkit vis(Excel) and get an error for some of the ni vis and some of my own that call lower level excel vis. The error is that he vi is not executable, however they run fine in the development environment. I do not get this error if I save all vi's into one llb with save with options command and then build. However, when I try to run the app, this error re-appears. Also, do I have to add the dynamically loaded vi's that are part of the toolkit in my build script? Could this be the cause of the problem? If so, what's the best way to find all of them? Any suggestions?
You have hit in on the nail! You do need to add the dynamically loaded VIs when you are creating an executable from your VI. You need to add _wordsub.lib and _exclsub.lib as dynamically loaded VIs into your executable. Try this and let us know if you have any more problems with it.
J.R. Allen -
0
down vote
favorite
I am working on a WPF app that I want to create for Windows 8. I followed steps mentioned in
Hansleman's blog to make some manual modifications using WinRT functions in a WPF app. Everything worked well, until I tried to publish the app. When I clicked on publishing the app I got error "The 'ResolveManifestFiles' task failed unexpectedly.
System.ArgumentException: Value does not fall within the expected range."
Afterwards, it will produce the same error when attempting a simple solution build.
Even if you create a simple WPF project and add the references mentioned in blog to access WinRT functions and publish, this issue can be reproduced.
I think it would be common scenario to call WinRT functions from WPF and someone should have done it. Is anyone aware what should be done to fix this issue?I am having the same problems and came across this article while researching a workaround.
It is surprising more people aren’t talking about this.
Here are the steps to reproduce the problem; Using Visual Studio Express 2012 (x64) create a new VB Windows Forms Application.
Unload the project and edit the [ProjName].vbproj in the solution explorer.
Add <TargetPlatformVersion>8.0</TargetPlatformVersion> to the <PropertyGroup>.
Save and reload the project. In Add Resource/Reference Manager add the Windows.minmd found under Windows/Core.
This WinRT/Desktop solution will run as expected. Now try to Publish this solution.
It will FAIL with the following ERROR; “The ResolveManifestFiles task failed unexpectedly, Value does not fall within the expected range.”
Attempting to build or run the solution again now will fail with the same Error.
The only way to build the project now is to remove the “Enable ClickOnce security settings” option under the project properties Security settings.
Occasionally using this trick, the solution will build but not run.
When that happens jiggle around with Debug/Release Solution Configurations and the Any CPU/x64 Solution Platforms then rebuild and try the run again.
This fussing around will get you through development however any attempt to publish with restore the ClickOnce security setting and create the previous Error.
The first question here is how do you publish a WinRT app for the desktop with VS2012 Express.
Then secondly, if that is not possible can we publish this Express solution with a 3rd party deployment tool like InstallShield Limited Edition or the WIX Toolset.
Neither however seems functional in a VS Express environment.
Then thirdly, are there ways to access hardware sensor devices from a desktop solution without resorting to the WinRT API.
Any ideas or new research directions would be greatly appreciated. -
Error when building a report from 2 different subject areas
Hello Experts,
I am using obiee 11.1.1.5.
I have 5 dimension D1,D2,D3,D4,D5 connected to fact1 and 4 dimension connected to fact2 such as D1,D2,D6,D7.
where D1,D2 is common to both the facts.
Fact1 Is in subject area 1 and Fact2 is in subject area2.
I need to create a report by adding columns of subject area 1 and 2 with columns from all the dimensions D1,D2....D7.
As of now i am getting error stating "No fact table exists at the requested level of detail " when i try to add columns from 2 different subject areas.
Can anyone help me in solving the above problem.
Is there any prerequisite to be taken care when building a report from 2 different subject areas.
Regards,
NNHello Nagireddy,
So kind of you, for your quick reply
I was able to solve the error by doing below steps in additional what you have specified
-->For the fact table LTSs, set the logical level in the Content tab to the dimension's lowest level for each conforming dimension (leave the non-conforming dimensions level blank).
Now I have another requirement i,e
I need to have non measure columns such as Date into the newly created fact in BMM layer.
I tried doing the steps which I followed for measure column, but it is throwing the same error which I get earlier.
Below is the error
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail:
Let me know if have any suggestions -
Error when building application with Excel included
Hi All !
I've read several post on problems with Report Generation Toolkit when building applications that uses Excel or Word interactivity.
I've included both _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi in my project and added them to the dynamic vis and support files.
When building I get the error :
The VI is broken. Open the VI in LabVIEW and fix the errors.
C:\Programmer\National Instruments\LabVIEW 8.2\vi.lib\addons\_office\_exclsub.llb\_Excel Dynamic VIs.vi
When opening that VI there is no broken arrow and all the vi's included in this is not broken either.
I've tried mass compiling and so on but so far luck.
Regards Morten Kahr
Regards Kahr
Certified LabVIEW Architect
CIM A/SIf you do a search on this forum you will find this to be a common and vexing problem. I myself had this same exact problem about a year ago, and it took me the better part of a day to track it down. As you will find by reading the various threads on this problem, there seems to be no specific cause for this, and it remains a mystery, and the solutions are no better than chanting voodoo, and probably just as effective.
One thing you can try is to force a recompile of your VI hierarchy. Open you top-level VI. If it's set up to run when opened, stop it. Hold down the Control key and click the run button. This will force a recompile of the application. Sometimes this works, sometimes it doesn't. Like I said, voodoo.
Another thing to look for is to check if you are using any diagram disable structures or case structures with a constant wired, as in trying to use the case structure to comment out code.
Are you using classes and passing by reference? There was a mention of this here. -
Error when building the Java pricing userexit manual code
I went throught the manual for the pricing userexit manual... it tells you to ignore the errors when you do an ant build but I want to remove all the errors since they dont let the rest the code compile.... where are the jars for these errors:
[javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:16: package com.sap.vmc.logging does not exist
[javadoc] import com.sap.vmc.logging.Category;
[javadoc] ^
[javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:26: cannot resolve symbol
[javadoc] symbol : class Category
[javadoc] location: class com.sap.spc.document.DocumentConstants
[javadoc] public static final Category CATEGORY = Category.getCategory(Category.APPLICATIONS, "/AP/SPC/Document");
[javadoc] ^See the [SAP note 809820 - Userexit concept for pricing|https://service.sap.com/sap/support/notes/809820]
Use ZIP file the attached to the above note - PRC_UE_CUSTOMER_V105.zip
ZIP file contains an Eclipse .project file that has the required build path. If you read the documents carefully, it does refer this project file.
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
<classpathentry kind="src" path="src"/>
<classpathentry sourcepath="lib_src/src" kind="lib" path="lib_api"/>
<classpathentry kind="lib" path="lib_vmc_api/base_services_stripped_api.jar"/>
<classpathentry kind="output" path="bin"/>
</classpath>
Again read the documents thoroughly. They are neither fictions nor non-fictions, but technical documents written with care. So, we must also read them with care. If we don't follow them, then it is time to engage someone who does. )
BTW, coming back to the Java basics - One must have a class and source files to debug. You won't get a class file unless it is compiled. The Java file won't compile correctly if it has syntax / reference errors. Unfortunately or fortunately, all these apply to the IPC java userexit development as well.
Easwar Ram -
Hi,
I get this error when I am building the cube:
XOQ-00703: error executing OLAP DML command "(SYS.AWXML!R11_COMPILE_TIME_DIM('TIME.DIMENSION') : ORA-00600: internal error code, arguments: [xspg: RSALOC02], [], [], [], [], [], [], [], [], [], [], []
Has anyone ever seen this?
Regards /MagnusGot an answer on this from Oracle support. The issue is solved by applying patch 9789172.
/Magnus -
Error when building my VI to DLL in LV6.1
pls see the attachment! It's the error display when building my VI to DLL in LV6.1. My lv is PDS Version and i tried reinstall Application Builder , but the same error occurs. How can i resolve it? Thanks a lot!
Attachments:
error_when_builging_DLL.zip 44 KBGoto
..\National Instruments\LabVIEW 6.1\applibs\lvdllbuilder
and double click lvdb.exe. It will run (you will not see anything), registering itself. After running, you might want to goto Task Manager and kill lvdb.exe process manually. Try it now.
A Rafiq -
Error when building Azure project
A few days ago I started to see an error when compiling my Azure Project (cloud service with web and worker roles). I've been working with this Azure project for almost 3 years without seeing this before. When I attempt to build my Azure Project, 9 times
out of 10 it fails with this error:
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Windows Azure Tools\2.2\Microsoft.WindowsAzure.targets(1371,5): error : Could not find file '<SourceCode>\SomeProject\bin\Debug\ServiceDefinition.csdef'.
Here's another when I attempt to build again:
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Windows Azure Tools\2.2\Microsoft.WindowsAzure.targets(985,5): error : Could not find a part of the path 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\csx\Debug\ServiceDefinition.csdef'.
Sometimes the error refers to ServiceDefinition, sometimes to ServiceConfiguration. The problem is that it is looking for the two files in places where it's not supposed to be. I have a single Azure Project in my solution, and a single service definition
in my solution, but when building the error message says it can't find the service definition/config in some other Project in the solution. For example, it may try to find the service definition in some unit testing C# Project instead of in the Azure Project.
Some isolation:
Building same source code works fine for my colleauges.
I've set up a new computer with Windows 8, VS2013, VS2013 Update 1, Azure SDK 2.2. Still same error.
I've turned off multi-core builds. Still same error.
I've seen another post on SO with a similar issue, but then it was related to publish settings files in his solution which were missing.Hi,
Did your colleague build the same solution or create a new solution with the existing code? If they have exactly the same solution as you have, then please check if the environment of your machine (both old and new) is different from theirs. For instance,
please check Azure version, VS extension, etc. If they created a new solution with the existing code, you can try to do that yourself to see whether it works.
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Geting error when build installer
I'm getting Error 33 and dotnet x86 ni language pack error and build stops
how can I solve this issue?
Building executable is fine, but the problem occurs during building installer.
Please advice
regards
Pierre Tannoury
Pevatech International S.A.R.Lthanks for helping,
i still receive another messages but the dotnet error message is gone
please see below the building status and what's errors remaining
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
Copying files...
Updating files...
*** Error: Fatal runtime error. (Error code -10)
*** Error Details:
Access violation! Structured exception code 3221225477
*** End Error Report
*** Error: An internal tool or library returned an error. (Error code -21)
Error Messages
*** Error Details:
Error in MDF API function: _MDFBuildDist_Build
Error List
.\InputParser.cpp(819): IInstallerError 108
Problem with updating Part DataSocket64.msi.
*** End Error Report
Done building deployment -
[Solved] Errors when building lib32-gnutls26..
Every time i install, remove, or update using pacman I get this output:
ldconfig: /home/user/.PlayOnLinux/wine/linux-x86/1.7.19-LeagueOfLegends2/lib/libgnutls.so.26 is not a symbolic link
ldconfig: /home/user/.PlayOnLinux/wine/linux-x86/1.7.19-LeagueOfLegends2/lib/libgnutls-extra.so.26 is not a symbolic link
ldconfig: /home/user/.PlayOnLinux/wine/linux-x86/1.7.19-LeagueOfLegends2/lib/libgnutlsxx.so.27 is not a symbolic link
This results after adding
/home/user/.PlayOnLinux/wine/linux-x86/1.7.19-LeagueOfLegends2/lib
to /etc/ld.so.conf.d/lol.conf and running:
ldconfig -v
The guide for League of Legneds specifies this solution as it fixes an in game error, but results in the libs being referenced directly instead of by symbolic links.
Simple solution. Download lib and make symlink.
I have found the package in AUR: lib32-gnutls26
and receive the following errors on build: http://pastebin.com/bjLqyP4d
arch x86_64
awesome wm
Last edited by gregwittman (2014-12-07 20:44:58)The wiki has updated fixing the symlinks needed for wine..
It was misisng a symlink from libgcrypt.
To fix I download the package lib32-libgcrypt15 or libgcrypt15, depending on your architecture, which provideds libgcrypt.so.11.
ARCH = either x86 or amd64.
VERSION = the wine version installed.
# cd ~/.PlayOnLinux/wine/linux-ARCH/VERSION/lib
# ln -s libgcrypt.so.11.* libgcrypt.so.11
# ln -s libgcrypt.so.11 libgcrypt.so
This fix can also be found on the League of Legends Wiki.
Last edited by gregwittman (2014-12-07 20:48:27) -
"constructor not found" error when building servlet
Greetings,
We are encountering the following error when trying to make or run a project that displays a simple crosstab as a servlet:
Error(45,9): constructor ServletRenderingContext(javax.servlet.ServletRequest, javax.servlet.ServletResponse, javax.servlet.ServletConfig) not found in class oracle.cabo.ui.ServletRenderingContext
Clicking on this error brings you to the following lines of source in ApplicationRenderingContext.java:
super (request, response, servlet.getServletConfig() );
Can anyone assist?
Regards,
Steve LockeThis happens in JDeveloper; can't deploy due to this error.
Here's my version info:
BI Beans Diagnostics(v1.0.0.0) 4/15/04
===============================================================================
JDEV_ORACLE_HOME ............................. = c:\oracle\ora92
JAVA_HOME .................................... = c:\oracle\ora92\jdk
JDeveloper version ........................... = 9.0.3.3.1205
BI Beans version ............................. = 9.0.3.6.0A
BI Beans internal version .................... = 2.7.0.13.1
Connect to database .......................... = Successful
JDBC driver version .......................... = 9.2.0.3.0
JDBC JAR file location ....................... = c:\oracle\ora92\jdbc\lib
Database version ............................. = 9.2.0.4.0
OLAP Catalog version ......................... = 9.2.0.4.1
OLAP AW Engine version ....................... = 9.2.0.4.1
OLAP API Server version ...................... = 9.2.0.4.1
Maybe you are looking for
-
Server not found messages and problem loading page message since I updated to the latest version of Firefox. Usually will load the 2nd time after hitting the try again option. Does not happen with Internet Explorer at all.
-
I am running Windows XP
-
Forgot password on ipod- how do I reset
how do i reset ipod classic. i forgot password
-
G4 10.4.11 I am not able to find the rectangle tool. I have reinstalled Illustrator twice. In the tool palette, there are 3 blank squares. I have attempted to use Grab to take a screen shot of the tool palette but it disappears when I launch Grab. Wo
-
Audio distortion on burned DVD
Hi everyone, I am having problems with a completed DVD. The movie was created in iMovie - no problem looks and sounds fine. I have transfered it to iDVD (best quality not best performance) - again, looks and sounds fine in preview. However, after the