Error when burning (error 4265)

i have been wasting so many CDs trying to burn things in iTunes. this is on a PC but i dont seem to have any problems my mac. it keeps telling me:
"The attempt to burn disks failed. An unknown error occured (4265)"
does anyone have the same problem and can anyone help?? im sure there is someone smart enough to help me.
thanks in advance.

Hi noddy:
Read this discussion and pay attention to Len Goff's threads.
http://discussions.apple.com/thread.jspa?messageID=1667843&#1667843
Sue

Similar Messages

Power calibration error when burning?

I get a power calibration error when burning from IDVD.
Any suggestions as to how to fix it?

Basically a power calibration is the drive writes to the blank and then tries to read it back and adjusts the laser power accordingly to get a proper burn. So there are a number of reasons you might get this problem.
One is the media itself. A bad disc or poor quality media might give you this error.
Next, you may have a dirty laser and running on of those cleaning CDs (they have little brushes on them to dust off the laser) might do the trick.
Third, could be a laser on the drive is giving up the ghost. Hopefully it is not the last one.
Patrick

Unknown error when burning disc

I get an unknown error when burning playlists to blank discs. My computer begins to write the discs, but stops after a song or two.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Memory allocation error when burning in premiere elements 2

I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika

memory allocation error when burning in premiere elements 2
Erika Lindsay - 09:30am Jan 4, 2009 Pacific
I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika

Error when burning DVD - no plugin DLLS

When burning a DVD I get an error message that says Plugin Coder error : no plugin DLLS. Why is this happening and how can I fix it?

They do but aren't cheap.
Look at SuperMediaStore.
You might be able to find them cheaper. I was just checking to see if they make them.

Hardware Error when burning DVD's

I keep getting an error message when burning DVD's using Toast Titanium on my iMac..it reads:
"Drive Reported an error, Sense key = hardware error, sense code = 0 x 03."
Twice after getting that message I couldn't continue to burn and it stopped, once it did continue to burn and finished successfully. Any ideas, anyone?
17" iMac G5 w/ iSight Mac OS X (10.4.3) upgraded to 1GB RAM

I get the same message today when burning from Toast 7.02 on my iMac. It happened when I was trying to make an audio CD from my iTunes collection (not when Copying from CD to CD). The exact message I got in the middle of my burn was:
The drive reported an error:
Sense Key = hardware Error
Sense Code = 0x03, 0x01
I tryed again with another CD and got the same thing. I never had a problem with these CD's (TDK CD-R up to 48x).
I wonder if there has to be some sort of software upgrade fro Roxio Toast or is this a superdrive malfunction/etc. My Superdrive gets very loud during this burn as well. I may take it in to Apple Genius Bar. Any ideas?

Hardware Error When Burning a CD or DVD

I keep getting the following error when I try to burn a CD or DVD via my internal burner....
The drive reported an error:
Sense Key = HARDWARE ERROR
Sense Code = 0x09, 0x02
FOCUS SERVO FAILURE
Using Toast 6 Titanium 6.0.7
Any suggestions.....?

lakewoodlawnman wrote:
Check on firmware update for your drive and different media is where I would start.
I think it may be a media problem as well...on numerous occasions when I insert a blank CD the drive will spin a few times the eject the CD....
I'm guessing I can find the firmware update via the Apple Support section..?
George Peters wrote:
I would upgrade your Toast software to the latest because the version you are currently running is not coded to run on an Intel Mac or even 10.4 for that matter. Toast 6.1 was the first version compatible with 10.4 and Toast 7.1 was the first Intel compatible version.
George
Thx...I was not aware I needed Toast 7.1....my current version has worked in the past so I thought I was OK....

HELP! OOstatus error=- 47, ERROR WHEN BURNING

I am getting an error that states "osstatus error = -47" when I try to burn a disc, does anyone know the workaround for this??
I am using 2ghz intel core 2 duo macbook
thanks in advance!

dicktatorsmith
We first need to determine what program is involved and the details of what you are doing?
You cannot burn your content to DVD disc (assumed DVD-VIDEO on DVD disc) with just Photoshop Elements and its associated Elements Organizer? So, if you are getting this error in your burn to disc, I am suspecting that you are not working with Photoshop Elements.
So, what program and version of it are you working with and on what computer operating system is it running?
The error that you present at burn has been seen before with no one description of what it means (that I have ever seen). Sometimes defragmentation of the computer hard drive and/or using another brand/type DVD disc resolves the issue. If you are in Premiere Elements burn dialog, does hitting the Rescan button a few times have any impact on the situation?
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
Please review, consider, and then let us know the outcome.
Thank you.
ATR

Multiplexing Error when burning DVD?

When I try to burn a DVD it gives me a burning error and tells me it's a multiplexing error. What does this mean and how do I fix it? I dragged and dropped pictures from iPhoto and added audio from iTunes. I've tried adding audio that I purchased and then audio that was from a CD (but imported into iTunes) thinking this would help, but it didn't. Please help.

Hi Gritz,
This quote is from another topic in this forum, that helped me:
"Quit iDVD and check to see if there are any third-party (non-Apple) plug-ins in /Library/QuickTime/ and ~/Library/QuickTime/ (the tilde "~" character represents your Home folder). If so, try temporarily disabling these items by moving them to another folder. Open iDVD and try burning your project again."
I had the same problem and I found that removing (or temporarily moving) any non apple quicktime plugins from the Library>Quicktime Folder, helps avoid these errors. Once you are done with your DVD burn. Move the plugins back into the folder.
Good luck,
Your friend in Mac OS X,
José

Error when burning disc

When burning cds on iTunes, the playlist is checked and then it starts and sounds like it is burning, but then cancels after several minutes and spits the cd back out. Says that the function can not be completed. Unknown error number 4000 or 4002. ???

Hi Michelle,
You are posting in the ITunes for Apple/Mac. Try the iTunes Window group. I am sure you will get a better answer there.
Or buy a Mac and come on back. Just kidding.
MJ

Error when burning DVDs

I get a L-EC uncorrectable error. (0x11, 0x5.) error when trying to burn a very short (30second) movie onto DVD. The DVD ejects and, when it next is inserted, doesn;t appear on the desktop. Any ideas boffins???

Try Verbatim DVD+R disks. If they burn it's the media and with Sony DVD-R I suspect it's likely to be the disks.

Hardware error when burning dvd

i am using DVD Studio Pro as well as iDVD to try and burn a project i created. i have also tried simply burning files to a DVD in Toast Titanium. i am well below the 4.7 gig limit for the project, all the video files are mpeg2 and ready to go. the entire "burn process" runs until the actual burning is supposed to take place. just recently i got this error message:
hardware error
tracking servo failure 0x09, 0x01
i have a 8x SuperDrive and i am trying to use Phillips 1-8x DVD+Rs. does anyone have a solution to this problem? i am beginning to get frustrated.

All the super drives seem to exhibit problems, at least some of the time with some media, especially at the highest burn rate. There is a work around. In DVD Pro, "format" with the output device set to disc and the format to ".img". When this is finished, open Disk Utility and "convert" the .img file to a CD/DVD master (.cdr). This file can then be used to burn to a blank DVD. If you click the options arrow in the burn dialog before beginning the burn, you can select a speed other than "maximum". Not elegant, but it works. My HL-DT-ST DVD-RW GWA-4165B DVD drive only succeeds at burning at its maximum rate (16x) about 1/3 of the time. However, at 12X it has been quite reliable.

Encoding error when burning mp4 videos to dvd-rw using idvd

hi all, i'm trying to burn mp4 videos on a blank dvd. i used the magicdvd option in idvd 08 but the error message of "encoding error" had appeared before it burned the videos to the dvd. could you please let me know if mp4 is not supported by idvd? i heard i must convert mp4 to mpeg-2 in order to watch it with regular dvd player, can i do that with mpeg streamclip? is mpeg-2 supported by idvd? thanks!

Hello Alarkin,
is there a free alternative to toast?
Yes, it's Disk Utility - just follow this procedure:
1. create the disk image in iDVD
2. double-click the resulting .img file to "mount" it. Next launch DVD Player to view your DVD .... if everything is fine, close DVD Player and eject the virtual disk.
3. Open Disk Utility and drag the disk image into the left hand pane, then hit burn.
Note: Set the burn speed to 2x or even 1x. Most burn errors are the result of high burn speeds. Also use only high quality DVD-R media (e.g. Verbatim)
hope this helps
mish

IDVD video encode error when burning to DVD

I am trying to burn a new copy of a project I successfully burned to DVD 2 years ago. I have not changed the source material. After the menu renders and video encoding begins I immediately get an error message "video encoding error." There are no menu warnings. All video is successfully previewed. Nothing has changed from the previous burn. The project info box shows all video and audio properly encoded and present.
What gives?

The way from FCE or FCP has been the same for me for lot's of years since FinalCut 1.2.5 I think (was no Express or Pro then)
And QuickTime Conversion never worked for me - I guess You were lucky two years ago.
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Just double click on the Hard Disk icon (top right on DeskTop) and read on bottom part of this windows frame e.g,
( in English - 1 of 14 selected, 38.24 GB FREE)
Encoding
• I use Pro Quality encoding if material (video + menu) exceeds 40 minutes ! if less I use Best Performances
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1) - BEST IS NOT BEST at all only fastest and results in Maximum amount of BURN ERRORS !
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Get a kranscoding error when burning home movies to disk

Transcoding error when buring to disk

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Error when burning (error 4265)

Similar Messages

Maybe you are looking for