Error when calling inbox.asp for inbox portlet exchange 2003

I have installed IIS6.0 and have followed the instruction on POINT website for deploying Microsoft exchange 2003 on Oracle AS Portal. I have sucessfully managed to browse the hello.html page and it works fine, but when i try pointing to this URL:
http://10.1.222.55/exchange/inbox.asp?mailbox=ckhimjee&server=jsadl02
i get the following message:
Server object error 'ASP 0177 : 800401f3'
Server.CreateObject Failed
/exchange/inbox.asp, line 175
800401f3
Please help as client is wanting to see email from Portlet and I need to get this to work.
Thanks
Chetan

No answer unfortunately. Just the same problem.
Anybody have an answer for this ?
IIS 6.0 on W2K3
Portal 10.1.2.0.2 (Build: 139) on RHEL 3
Hello.html loads fine

Similar Messages

Communication error when calling web service for checkin and checkout files

Hello,
I am trying to checkout and also to checkin files within the DMS via web service. The files are stored in the VAULT (=TRESOR) without the data server parth and DVA computer.
For checkout:
Original zum Ändern auschecken
CALL FUNCTION 'BAPI_DOCUMENT_CHECKOUTMODIFY2'
    EXPORTING
      documenttype    = pi_documenttype
      documentnumber = pi_documentnumber
      documentpart    = pi_documentpart
      documentversion = pi_documentversion
      documentfile    = lf_documentfiles
      pf_http_dest    = ''
      pf_ftp_dest     = ''
    statusextern    = lf_status
    IMPORTING
      return          = lf_return
      checkedoutfile = ls_checkedoutfile.
and for checkin:
Dokument einchecken
CALL FUNCTION 'BAPI_DOCUMENT_CHECKIN2'
    EXPORTING
      documenttype    = pi_documenttype
      documentnumber = pi_documentnumber
      documentpart    = pi_documentpart
      documentversion = pi_documentversion
      hostname        = ''
      statusintern    = ''
   statusextern    = lf_status
      statuslog       = ''
    IMPORTING
      return          = lf_return
    TABLES
      documentfiles   = lt_files.
But it is not working cause I always get a 'communication error' from the function CV120_FTP_START_REG_SERVER when calling one of these BAPIs via web service:
IF pf_check_gui = 'X'.
    CLEAR: gf_gui_exist,
           gf_gui_checked.
    CALL FUNCTION 'RFC_PING'
         DESTINATION 'SAPGUI'
         EXCEPTIONS: communication_failure = 1 MESSAGE lf_msg_text
                     system_failure        = 2 MESSAGE lf_msg_text.
    IF sy-subrc = 0.
      gf_gui_exist = 'X'.
    ELSE.
      CLEAR gf_gui_exist.
    ENDIF.
    gf_gui_checked = 'X'.
ENDIF.
Afterwards the following function is called where I got the error 'Program no longer started via RFC. No return possible.':
-> Vault with DVA -> ** Start FTP on the client
CALL FUNCTION 'SYSTEM_START_REG_SERVER'
       EXPORTING: progname    = 'sapftp'
                  startmode   = ''                          " X
                  exclusiv    = 'Y'
                  waittime    = 500
                  startcomp   = 'C'    " G=gui, C=RFC
                  startpara   = ' '
      IMPORTING: err_code    = lf_errno
                 err_mess    = lf_error_msg
                 destination = pfx_destination.
Regards
Jens

Hi! As mentioned below I had the same problem.
There are two notes concerning security setting of the SAP Gateway:
1069911 - GW: Changes to the ACL list of the gateway (reginfo)
1480644 - gw/acl_mode versus gw/reg_no_conn_info
Your basis team should check if the Gateway settings allow external programs to register on the gateway.
Best regards
Dominik

Error when calling getLocalSocketAddress() on for a newly created socket

Hello,
I have an issue when using JVM 1.5.0.12 on HP-UX (IA64N):
java.lang.Error: java.net.SocketException: Bad file number (errno:9)
     at sun.nio.ch.Net.localAddress(Net.java:123)
     at sun.nio.ch.SocketChannelImpl.localAddress(SocketChannelImpl.java:394)
     at sun.nio.ch.SocketAdaptor.getLocalAddress(SocketAdaptor.java:147)
     at java.net.Socket.getLocalSocketAddress(Socket.java:708)
I get this error when I accept a connection from a remote peer and I try to call getLocalSocketAddress() method on the new accepted socket connection object.
Does anyone have an idea about the cause for this error?
I also get 2 other errors but in different places in the code:
1/ java.io.IOException: No buffer space available (errno:233)
     at sun.nio.ch.ServerSocketChannelImpl.accept0(Native Method)
     at sun.nio.ch.ServerSocketChannelImpl.accept(ServerSocketChannelImpl.java:145)
This one I get when my server socket accepts a connection. But even if the connection is accepted succesfully, I might get the "java.lang.Error: java.net.SocketException: Bad file number (errno:9)" when trying to call getLocalSocketAddress()
2/ Once I accept the new connection I call "socketChannel.socket().setTcpNoDelay(true)" but sometimes this fails with a SocketException: Invalid argument (errno:22).
Al the 3 errors are manifesting sporadically and I cannot find the cause.

Hello,
Thanks for your quick response!
We actually do something like this:
// NIO engine build around a Selector for asynchronous IO developpement.
public class NIOCore implements Runnable {
private final Selector selector;
private final Set<SelectableChannelListener> channels = new HashSet<SelectableChannelListener>();
public void run() {
for (final Iterator<SelectionKey> i = selector.selectedKeys().iterator(); i.hasNext();) {
final SelectionKey selectionKey = i.next();
i.remove();
final SelectableChannelListener selectableChannelListener = (SelectableChannelListener) selectionKey.attachment();
if (!selectionKey.isValid()) {
continue;
// Check what event is available and deal with it
if (selectionKey.isAcceptable()) {
if (log.isTraceEnabled()) {
log.debug("Processing ACCEPT event for listener: " + selectableChannelListener);
try {
selectableChannelListener.acceptEvent();
} catch (final Throwable t) {
log.error("Error on ACCEPT event for listener " + selectableChannelListener, t);
selectableChannelListener.close();
As you ca see, we use to do a callback on our SelectableChannelListener objects. In our case the SelectableChannelListener object that actually propagates the JVM Error is this one:
public final class Acceptor extends SelectableChannelListener {
protected NIOCore core;
public void acceptEvent() {
SocketChannel socketChannel = serverSocketChannel.accept();
if (socketChannel == null) {
throw new NIOCoreException("No incoming connection to accept");
// Socket options
if (params.getSocketBufferSize() > 0) {
socketChannel.socket().setSendBufferSize(params.getSocketBufferSize());
try {
socketChannel.socket().setTcpNoDelay(true);
} catch (SocketException ex) {
if (log.isDebugEnabled() || log.isTraceEnabled())
log.warn(logPrefix + "could not set TCP_NODELAY socket option.You may experience performance loss", ex);
else
log.warn(logPrefix + "could not set TCP_NODELAY socket option. You may experience performance loss. Cause : " + ex.getMessage());
// later if the connection is accepted succesfully this line is executed
SocketAddress localAddress = socketChannel.socket().getLocalSocketAddress();
@Override
public void close() {
core.unregister(this);
try {
selectableChannel.close();
} catch (final IOException e) {
// Ignore
NIOPortManager.getInstance().setListenBindSapState(getBoundSAP(), true);
So bassically when we call selectableChannelListener.close() we indeed close the ServerSocketChannel channel, but we also unregister the Acceptor observer object from NIOCore in order to free memory and set the SAP as available.
The problem is that we cannot reproduce this issue (it reproduces only on our customers environment) and I consider rather risky to remove the selectableChannelListener.close() call.
Actually I would catch the Error and package it in an internal runtime exception:
SocketAddress localAddress = null;
try {
localAddress = socketChannel.socket().getLocalSocketAddress();
catch (Throwable t) {
throw new MyRunntimeException(t);
And then to catch this new runtime exception in NIOCore class when this call is made:
try {
selectableChannelListener.acceptEvent();
} catch (final MyRunntimeException e) {
log.debug("JVM error occured!");
} catch (final Throwable t) {
log.error("Error on ACCEPT event for listener " + selectableChannelListener, t);
selectableChannelListener.close();
I know this is silly but at least we can use it as a temporary workaround until these JVM issues are fixed.
Also since socketChannel.socket().getLocalSocketAddress() API call only throws that specific error from time to time, we could implement a retry mechanism. What I mean is to call getLocalSocketAddress() in a while loop and if the call fails with Error just continue to retry...we could provide 3 retries for example. If on the 3 ^rd^ retry the call also fails, just let it be failed and treat it in normal way.
Best regards,
Alex

Error when calling up the application function for hierarchies

Hello,
if I try to load a material class hierarchy and the loading is failing directly in source system with error message "Error when calling up the application function for hierarchies". Did anybody have this problem? I could not find anything iside the forums.
Thanks for your help!
Regards,
Christian

Hi,
I have the same problem. Do someone know the solution? What is the problem?
Thanks,
Ángel.

Error when calling method INIT in class cl_hrxss_rem for salary statements

after configuring the our hrform to work with the new ess system in ecc 6.0 we configured the hrfor decision tree to $cedt$ and pointed the form variant to the edtin feature.
Now we are getting a class error.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when calling method INIT of class CL_HRXSS_REM
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:374)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
     at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
     at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1246)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:354)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:547)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:591)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:822)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks

Hi,
Maintain the EDTIN feature
&CEDT$
And UR problem solve

Error when calling a Webservice's public method in Forms10g

Hi,
I'm getting the following error when calling a webservice's public method, i'm using Forms10g 10.1.2.3
java.rmi.RemoteException; nested exception is: HTTP transport error javax.xml.soap.SOAPException
java.security.PrivilegedActionException javax.xml.soap.SOAPException
Message send failed javax.net.ssl.SSLException SSL handshake failed X509CertChI have added the Jar containing the client proxy in both Classpaths(system variable and default.env), the jar has been made with jdk 1.4
I also have tested the client proxy from jDeveloper and it's working there, but in Forms i'm getting this error.
I guess my problem might be that i'm calling a webservice that is secured since the url starts with https
what should i do to fix this ??
Regards
Carlos

I understand, so i have a doubt, why the webservice works on jDeveloper ??Not just JDeveloper even soapUI and Neatbeans have a way of working without a client certificate installed.
I do not know how they achieve it. I know that they work without a client DC.
Cheers,
PS: See this http://stackoverflow.com/questions/8887434/webservices-ssl-https, it offers a clue.
The java programs run unhindered when one-way authentication is being used. These products ship with a digital certificate that is in the path of most popular CAs.
Corollary, if the Web Server is configured for mutual authentication then you need to install and configure the client certificate in the tools.
Edited by: Prabodh on Dec 5, 2012 8:36 PM

401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
then Build{...} Dictionary (Output to Variable:requestHeaders)
then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
The RequestHeader is set to the requestHeaders variable though the web service call properties
then Log Variable:responseCode to the workflow history list
After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
Thank You for any insight

Hi,
According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
Please make sure you use the ‘Call HTTP Web Service’ correctly.
You can enter the URL into the brower to check whether it is correctly.
You need to
create the Request header requestHeaders
using a Dictionary:
Accept : application/json;odata=verbose
Content-Type : application/json;odata=verbose
To associate the
requestHeaders variable, select the Call action
property, set the RequestHeaders property to
requestHeaders.
Please refer to the following articles:
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
Calling the SharePoint 2013 Rest API from a SharePoint Designer
Workflow
In addtion, you need to make sure you install the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation

Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.

Hi,
Check the sample code..
report zpo_test             .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
    exporting
      poheader         = header
      poheaderx        = headerx
    importing
      exppurchaseorder = purchaseorder
    tables
      return           = return
      poitem           = item
      poitemx          = itemx
      poaccount        = account
      poaccountx       = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
    write / return-message.
endloop.
Regards
Sudheer

Error when calling SOAP Runtime functions

Hi Guys,
I have a requirement in which i have to consume a webservice and get a response from it but when i consumed the web service and tried to test it i got the below error please let me know solution for this as it is very urgent and also i am very new to web services stuff
Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Thanks
shivraj

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

500 Internal Server Error - When calling LOV's

I receiving the following error when calling a LOV.
Both date LOV's and LOV's based on a foreign key fail.
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Errors compiling:D:\Oracle\oc4j\j2ee\home\application-deployments\ois\web\persistence\_pages\_jheadstart\_lovFrame.java
error: Invalid class file format in C:\Program Files\Java\j2re1.4.0\lib\rt.jar(java/lang/Object.class). The major.minor version '48.0' is too recent for this tool to understand.
D:\Oracle\oc4j\j2ee\home\application-deployments\ois\web\persistence\_pages\_jheadstart\_lovFrame.java:0: Class java.lang.Object not found in class com.orionserver.http.OrionHttpJspPage.
package _jheadstart;
^
2 errors

Marcel,
JDeveloper will not run out of the box with JDK 1.4. There is a help topic 'Configuring Support for JDK 1.4.0.01 in JDeveloper' that gives you some information.
But you also need to verify the compatability of all the frameworks you use with JKD 1.4, including BC4J, MVC and UIX. E.g. the classes12.jar we normally use for a JHeadstart application only works with JKD 1.2/1.3.
Having found out which versions of the frameworks you need, the next step is to validate whether the JHeadstart runtime classes will work with these versions. We have no experience ourself in this respect.
If it is an option for you, you might consider to downgrade to JKD 1.3.
Jan Kettenis

ERROR: Error when calling IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN

Hi,
We are having a problem in processing (receiving) an idoc through our RFC client in SAP .
The RFC Client is up and running however, turns red while processing a certain Idoc.
The error occured:
Error when calling IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN (IDoc /).
This issue has been occurring since August 18-23. if the status of the RFC client is green, its shows: Waiting for IDOC.
My questions would be:
1) If for example, there are 50,000 idocs that are being sent and the first 1000 contains an error, will it still process the 49,000 idocs left through RFC client?
2) what are the possible errors of an idoc which causes the RFC client to be down (having the error above)? is it the format of the idoc? or the idoc_type itself?
3) another instance would be, if they are resending the idocs again, the RFC will be up eventually and we'll be able to receive the idocs. what are the causes for this?
4) are there any ways to track these idocs (which contains the error) in BODI or in SAP?
5) what are the alternative ways of processing the idocs that contains an error?

I think there is a misspelling in your IDOC type (in header of IDOC probably)
or the IDOC type does not exist on your SAP system
you call function IDOCTYPE_READ_COMPLETE remotely on SAP server and this falls into error with exception 1 (OBJECT_UNKNOWN)

JAX-WS client error when calling web method

My JAX-WS client is getting the following error when calling a web method:
Exception in thread "main" javax.xml.ws.WebServiceException:
No Content-type in the header!
I'm using Eclipse as my development environment. I use the CXF facet to generate a WSDL from Java code. I then use the New -> Web Service Client to generate client side code from the WSDL.
The following fully describes my environment:
Windows XP
JDK 1.6.0_22
Java EE 6
Eclipse Helios
Apache CXF 2.3.0 (runtime)
Tomcat 6.0
I have found several post on the net that describe this problem and a solution for JBoss, but I have been unable to find anything that addresses this error on Tomcat.
I can provide source code if needed. The app is a simple Hello World web service. I'm using it to try and get familiar with developing web services with all the components listed above.
Thanks

Hi Anders,
The resolution of the crossdomain problem is not to store an cross-domain-policy file at the [SAP] webservice side; but instead it needs to be done at the (every...) webservice client. In case the client is an IIS based webapplication (and thus the ultimate end-users are accessing it via their browser), this is not such an issue. It there is sufficient to put an crossdomain.xml policy file in the IIS main virtual root of your 'client' .net webapplication (c:\inetpub\wwwroot). It also can be required or at least helpful to put a clientaccesspolicy.xml file; both at the main virtual root and in the virtual root of the specific webapplication
In case of SharePoint application, the crossdomain.xml file must be stored in the WSS virtual root of that site; c:\inetpub\wwwroot\wss\virtualdirectories\<your SharePoint webapp>
Best regards, William.

IGS error (: Error When Calling Up IGS (ListenerRfc: unknown error))

Hi,
We have recently upgraded to NW04S.
Most of our BW reports( SAP delivered or custom, web template or not ) work fine with the IGS, while some reports don't, We receive a message from the Enterprise Portal ( Error When Calling Up IGS (ListenerRfc: unknown error)). No other details are available
We have checked and found out the related web templates are actually activates properly. From the same business content, we find some repports work and some don't, all however use web template.
Has anybody expoerienced the same? Please help.
   Thanks
Arunava

Hi AHP,
   1> BW_IGS_ADMIN when executed showed me some charts with some statictics and status etc. However as mentioned the other report BW_IGS_CHART_TEST just shows me a blank screen.
    2> SM59 connection test for the IGS RFC IGS_RFC_DEST is successful
    3> Ping on the Gateway Host( for the RFS dest) works fine as well.
    4> Also as I mentioned earlier, some of the reports using web teamplate works fine where some are not.
    5> when I do the RFC trace ( since I get an "Error When Calling Up IGS (ListenerRfc: unknown error) ) via ST01 for the query , in the BI sysatem, I get an error 'Prog:CL_IGS_CHART==================CPRow:'.
   Please let me know how do I proceed further.
Thanks
Arunava

Error when calling up IGS(listenerrfc: unknown error)

Hello,
We have integrated IGS 640.2 running on os windows 2003 64 bit(BW 3.5) .When i call the IGS chart from the EP portal i am getting the following error messge
Error when calling up IGS(listenerrfc: unknown error)
When i run the report GRAPHICS_IGS_ADMIN i am getting a blank screen.
This is in the case of production server.
I am getting the graph when i run report GRAPHICS_IGS_ADMIN in my BW quality server ( with same version IGS 640.2 os windows 2003 32 bit).
I have followed the below stpes for re-constructionin BW prod:
Followed the Snote 458731
1. Checked the Rfc destination 'GFW_ITS_RFC_DEST' amd 'IGS_RFC_DEST'
2. I can see the monitoring page when i run http://IGSHOST:LISTENERHTTPPORT
3. Program id and gateway is properly maintained
4. It is not generating any dumps when i set the dump status to "dump_on"
but in BW quality - dump file is getting generated
I can't switch on trace because it requires resatrt of teh server which is not possible in production.
I can see service called SAP IGS in BW qualitybut it is missing BW production.
Apart from that evrything looks similar in both quality and production server.
Can anyone advice me on how to fix this issue.
Appreciate your response.
Thanks in advance.
Vadi

Check the following Note : 454042
In rz20 you can find the IGS as the Internet Graphics Server in the monitor set SAP CCMS Monitors for Optional Components.
When you double-click on this entry a hierarchy with performance values should be displayed. If no hierarchy is displayed, even though the IGS is running, call transaction se38 and execute the program graphics_igs_admin. Choose Environment ® Switch on CCMS to activate the IGS display in rz20.

Getting Msg: Error when calling Credit Management: Technical Error

Hi All,
While creation of sales order in ECC, i am getting a message "Error when calling Credit Management: Technical Error"
Can you help me in this case
Regards,
Satish

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

Error when calling inbox.asp for inbox portlet exchange 2003

Similar Messages

Maybe you are looking for