Error when calling Synchronous SOAP Receiver

Hi,
When I am calling a synchronous Web service using SOAP Receiver adapter I am getting the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PARSING">ADAPTER.SOAP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: ECAPISoap. at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.RouteRequest(SoapServerMessage message) at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Could anyone tell what might be the issue?

Satish,
Now I am getting the following error:
soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: . at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.RouteRequest(SoapServerMessage message) at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)</

Similar Messages

String index out of range: 0 error when sending to SOAP Receiver

Hi experts,
I have an interface
IDOC -> XI -> SOAP
Occasionally I will get this error message from RWB when sending to the SOAP service:
Delivery of the message to the application using connection AFW failed, due to: String index out of range: 0
To trace the soap message, I sent the message through a TCPMonitor, the error does not occur anymore.
Has anyone met with this problem before?
How do I resolve this?
Thanks!
Ron

> Wee,
>
> The error states there is some problem in your
> message mapping. Have you used any substring function
> in your mapping. If yes can you check the message for
> which you have got error in message mapping. For this
> open sxmb_monin and open your message and then right
> click and then view source. Then copy this source and
> test in message mapping test tab. Then you will come
> to know whether you have any mapping error or not?
>
> ---Satish
I did not do any substring in the mappings.
The strange thing is, with the same message, I can re-send without any error if I send this message through the SOAP TCP Monitor.

Error when calling SOAP Runtime functions

Hi Guys,
I have a requirement in which i have to consume a webservice and get a response from it but when i consumed the web service and tried to test it i got the below error please let me know solution for this as it is very urgent and also i am very new to web services stuff
Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Thanks
shivraj

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Error when calling SOAP Runtime functions - Please help!

Hi,
Very new to SAP. I just installed SAPNW7.0ABAPTrialSP12 (sandbox server, with default options) and setup the
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/7c623cf568896be10000000a11405a/content.htm">Flight Data</a>.
I wanted to invoke some of the Flight Data functions through SOAP. So I invoked the following URL:
http://localhost:8000/sap/bc/srt/rfc/sap/BAPI_FLIGHT_GETDETAIL?sap-client=000&wsdl=1.1
I get the following error:
The following error text was processed in the system NSP : Error when calling SOAP Runtime functions
The error occurred on the application server hs_NSP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: HANDLE_REQUEST of program CL_SOAP_TRANSPORT_EXTENSN_ROOTCP
      Method: HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
      Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
      Module: %_HTTP_START of program SAPMHTTP
FROM Runtime Error Log:
Runtime Errors                     UNCAUGHT_EXCEPTION
Exception                          CX_SOAP_CORE
     Termination occurred in the ABAP program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCP" -
           in "HANDLE_REQUEST".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 37
          of the (Include) program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCM004".
Does anyone have any ideas on what is going on? Thanks in advance.

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

Error when calling a Webservice's public method in Forms10g

Hi,
I'm getting the following error when calling a webservice's public method, i'm using Forms10g 10.1.2.3
java.rmi.RemoteException; nested exception is: HTTP transport error javax.xml.soap.SOAPException
java.security.PrivilegedActionException javax.xml.soap.SOAPException
Message send failed javax.net.ssl.SSLException SSL handshake failed X509CertChI have added the Jar containing the client proxy in both Classpaths(system variable and default.env), the jar has been made with jdk 1.4
I also have tested the client proxy from jDeveloper and it's working there, but in Forms i'm getting this error.
I guess my problem might be that i'm calling a webservice that is secured since the url starts with https
what should i do to fix this ??
Regards
Carlos

I understand, so i have a doubt, why the webservice works on jDeveloper ??Not just JDeveloper even soapUI and Neatbeans have a way of working without a client certificate installed.
I do not know how they achieve it. I know that they work without a client DC.
Cheers,
PS: See this http://stackoverflow.com/questions/8887434/webservices-ssl-https, it offers a clue.
The java programs run unhindered when one-way authentication is being used. These products ship with a digital certificate that is in the path of most popular CAs.
Corollary, if the Web Server is configured for mutual authentication then you need to install and configure the client certificate in the tools.
Edited by: Prabodh on Dec 5, 2012 8:36 PM

500 Internal Server Error - When calling LOV's

I receiving the following error when calling a LOV.
Both date LOV's and LOV's based on a foreign key fail.
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Errors compiling:D:\Oracle\oc4j\j2ee\home\application-deployments\ois\web\persistence\_pages\_jheadstart\_lovFrame.java
error: Invalid class file format in C:\Program Files\Java\j2re1.4.0\lib\rt.jar(java/lang/Object.class). The major.minor version '48.0' is too recent for this tool to understand.
D:\Oracle\oc4j\j2ee\home\application-deployments\ois\web\persistence\_pages\_jheadstart\_lovFrame.java:0: Class java.lang.Object not found in class com.orionserver.http.OrionHttpJspPage.
package _jheadstart;
^
2 errors

Marcel,
JDeveloper will not run out of the box with JDK 1.4. There is a help topic 'Configuring Support for JDK 1.4.0.01 in JDeveloper' that gives you some information.
But you also need to verify the compatability of all the frameworks you use with JKD 1.4, including BC4J, MVC and UIX. E.g. the classes12.jar we normally use for a JHeadstart application only works with JKD 1.2/1.3.
Having found out which versions of the frameworks you need, the next step is to validate whether the JHeadstart runtime classes will work with these versions. We have no experience ourself in this respect.
If it is an option for you, you might consider to downgrade to JKD 1.3.
Jan Kettenis

ERROR: Error when calling IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN

Hi,
We are having a problem in processing (receiving) an idoc through our RFC client in SAP .
The RFC Client is up and running however, turns red while processing a certain Idoc.
The error occured:
Error when calling IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN (IDoc /).
This issue has been occurring since August 18-23. if the status of the RFC client is green, its shows: Waiting for IDOC.
My questions would be:
1) If for example, there are 50,000 idocs that are being sent and the first 1000 contains an error, will it still process the 49,000 idocs left through RFC client?
2) what are the possible errors of an idoc which causes the RFC client to be down (having the error above)? is it the format of the idoc? or the idoc_type itself?
3) another instance would be, if they are resending the idocs again, the RFC will be up eventually and we'll be able to receive the idocs. what are the causes for this?
4) are there any ways to track these idocs (which contains the error) in BODI or in SAP?
5) what are the alternative ways of processing the idocs that contains an error?

I think there is a misspelling in your IDOC type (in header of IDOC probably)
or the IDOC type does not exist on your SAP system
you call function IDOCTYPE_READ_COMPLETE remotely on SAP server and this falls into error with exception 1 (OBJECT_UNKNOWN)

IGS error (: Error When Calling Up IGS (ListenerRfc: unknown error))

Hi,
We have recently upgraded to NW04S.
Most of our BW reports( SAP delivered or custom, web template or not ) work fine with the IGS, while some reports don't, We receive a message from the Enterprise Portal ( Error When Calling Up IGS (ListenerRfc: unknown error)). No other details are available
We have checked and found out the related web templates are actually activates properly. From the same business content, we find some repports work and some don't, all however use web template.
Has anybody expoerienced the same? Please help.
   Thanks
Arunava

Hi AHP,
   1> BW_IGS_ADMIN when executed showed me some charts with some statictics and status etc. However as mentioned the other report BW_IGS_CHART_TEST just shows me a blank screen.
    2> SM59 connection test for the IGS RFC IGS_RFC_DEST is successful
    3> Ping on the Gateway Host( for the RFS dest) works fine as well.
    4> Also as I mentioned earlier, some of the reports using web teamplate works fine where some are not.
    5> when I do the RFC trace ( since I get an "Error When Calling Up IGS (ListenerRfc: unknown error) ) via ST01 for the query , in the BI sysatem, I get an error 'Prog:CL_IGS_CHART==================CPRow:'.
   Please let me know how do I proceed further.
Thanks
Arunava

LV 6.0.2: an App-built dll gives a runtime error when called by C

I want to use Labview 6.0.2 VIs as DLL's in a Borland C++ Project.
Starting with the simple I have made a VI that returns a constant int32 then built a dll with the Application Builder and put the dll and include file in a BC++ project directory. Compile and link seems to run well. But when excuting the call to the LV fuction gives Fatal Error: labview.lib was not called from a Labview process.
It seems this question was posted before, but answer didn't help me, Sorry.
7.1 -- 2013
CLA

Hi Gabriela -
This question is answered in the KB article entitled : "LabVIEW.LIB Error When Calling a DLL Built with LabVIEW"
The link for this document is -> http://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/a4c3aef93240280a86256931006fb66c?OpenDocument
Or you can go directly to www.ni.com/support and search for this document and others to help.
The reason for this is that the old labview.lib does not know how to correctly locate the LabVIEW Run-Time Engine when called.
From the document I posted ->
Your dll is most likely making a call If you want to call a Windows DLL or CIN built with a version of cintools before LabVIEW 6.0, you must relink the DLL with the labview.lib from 6.0. If you call an old DLL or CIN in your LabVIE
W DLL, you receive the aforementioned error and the application terminates, because the old labview.lib does not know how to correctly locate the LabVIEW Run-Time Engine when called in this situation.
Good luck-
ben schulte
national instruments

Javascript Error when calling EPCM.raiseEvent

Hi all!
   I'm having a Javascript error when calling EPCM.raiseEvent function. The error is :
   'The object does not accept the method or property'
Maybe the traslation is not perfect (I'm using spanish for my browser). Here is my call:
   EPCM.raiseEvent('myPar','myEvent','myParam');
What can be wrong?
Thanks in advance, and sorry for my terrible english.

Hi!
   This error is very strange... I accidentally changed the event name at consumer, but not at producer.... and the error didn't appear... Obviuslly it did'nt work, but it's so strange that if the event is not cought, there is no error (but nothing happens)
   I also noticed that doesn't matter which event I raise (I have two of them), the error is thrown at the same line, and they have totally different caller and receiver functions....
Thanks In advance.
Message was edited by:
        Eneko Rodriguez

Error when calling MRM_INVOICE_PARK - Rate type/exchange rate

Greetings gurus-
When calling MRM_INVOICE_PARK, we receive an error when trying to make a simple update that adds a payment block to a pre-existing invoice.
The error is: Enter rate THB / USD rate type M for 00.00.0000 in the system settings
We only get this error when we have a vendor set up to use withholding tax, and only when we park. If we post the invoice directly or park an invoice without withholding tax we don't see this issue.
I have entered the configuration in transaction OB08, and I believe I have the withholding tax configuration done properly, has anyone seen a similar issue before, or can you point me to where I might be missing some config that resolved the issue?
Thank you,
Andy

Have a look at the following note:-
Note 22781 - Exchange rate in accounting, exchange rate type
G. Lakshmipathi

ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
Ravi

Duplicate post ... please ignore.

ORA-03115 error when calling a Stored Procedure

Hi All,
I'm in the process of porting a Pro/C app from NT to Linux. I've installed 8.1.5 on our Linux box and patched it up to 8.1.5.02.
It all kind of works ok, except that I'm sometimes getting ORA-03115 errors when the app calls a stored procedure. The call in question looks like this:
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR resprows[50][3998];
int numret = 0;
int numrows= 50;
int done= 0;
unsigned long resp_id = 0;
EXEC SQL END DECLARE SECTION;
EXEC SQL AT DB_NAME EXECUTE
BEGIN pkg_something.getdata(
:resp_id, /* IN */
:numrows, /* IN */
:done, /* OUT */
:resprows, /* OUT */
:numret /* OUT */
END;
END-EXEC;
The stored procedure basically uses the resp_id value to select rows from a table;
in each row there is a VARCHAR2(4000) column which it copies into the hostarray resprows.
There may be anything from 1 to numrows returned from the SP.
Initially, the resprows rows were defined to be size [4000]. Unfortunately, this caused ORA-02005 errors - I then changed the size to [3998], which seemed to fix the 02005's (although I'm unclear as to the reasons why).
Now I'm getting the 03115 errors when calling the SP. The oracle manual is not very helpful on what this error means.
This all works chipper on NT.
Any ideas?
Thanks in advance,
Nigel.
PS: The database the app is talking to is still hosted on NT.
null

Histon FTM wrote:
ORA-04063: package body "LAZARUS.LAZARUS" has errors Above, obviously conflicts with the statement that follows:
>
The procedure and package have both compiled without errors and the statement on its own works fine in SQL*Plus.I suggest you take a look in the USER_ERRORS view to see, what the errors are.
And just checking:
You have schema called LAZARUS, which holds a package named LAZARUS, which holds a procedure called POPULATEGRIDPOSITIONS?
Edited by: Toon Koppelaars on Oct 1, 2009 5:55 PM

Error when posting a SOAP request

Hi all,
Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
can any one of you tell me in place of XISOAPAdapter what should i place?
Please help me to post the SOAP request to PI server.
Thanks in advance ,
Manohar.

Hi ,
copy the same URL (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
You should get response something like this '
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
ModuleProcessorRemote not instantiated
This is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
Ranjeet Singh.

Error when calling Synchronous SOAP Receiver

Similar Messages

Maybe you are looking for