Error When Calling Up IGS (Error opening an RFC connection.)

hi experts,
i am getting error Error When Calling Up IGS (Error opening an RFC connection.)
when i excute in wad, i checked in forums regarding this issue ,it is suggested that in check in se38--> se38->GRAPHICS_IGS_ADMIN(execute)->then it opens one more window (IGS_RFC_DEST)execute(could not reach to IGS)
in RSRT if i execute IGS test button it is showing page cannot be displayed
can anybody give answer for this what to do
thanks
venu

Hi Venu,
I would suggest that you contact your basis team and ask them to check the entry for the IGS in SM59.

Similar Messages

Error When Calling Up IGS (ListenerRfc: unknown interpreter)

Hello,
in WAD we are using IGS server from exteranl server.
Today i am getting the following errors when opening the web templates.
Error When Calling Up IGS (ListenerRfc: unknown interpreter)
Chart CHART_1: Internal error when communicating with the IGS
What could be the reason of these errors?
please let me know.
Regards,
Ravi

Hi,
Have you resolved the problem I am also facing the same problem even after updating to patch level 16.
Extract of log file is
trc file: "/usr/sap/BP1/DVEBMGS00/igs/log/pw_bwprod01_0.trc", trc level: 1, release: "640"
[Thr 01] Thu Jul 27 18:58:28 2006
[Thr 01]
[Thr 01] [PortwatcherMain::Initialize] Internet Graphics Service 6400.0.16.0
[Thr 01]
[Thr 01] [PortwatcherMain::Initialize] Configuration:
[Thr 01] [PortwatcherMain::Initialize]
[Thr 01] [InterpreterManager::LoadInterpretersFromPath] Interpreter [/usr/sap/BP1/DVEBMGS00/igs/lib/bwgis_mt.
so] of type [BWGIS] loaded and enabled
[Thr 01] Thu Jul 27 18:58:29 2006
[Thr 01] [InterpreterManager::LoadInterpretersFromPath] Interpreter [/usr/sap/BP1/DVEBMGS00/igs/lib/xmlchart_
mt.so] of type [XMLCHART] loaded and enabled
[Thr 01] [InterpreterManager::LoadInterpretersFromPath] Interpreter [/usr/sap/BP1/DVEBMGS00/igs/lib/gfwchart_
mt.so] of type [CHART] loaded and enabled
[Thr 01] [InterpreterManager::LoadInterpretersFromPath] Interpreter [/usr/sap/BP1/DVEBMGS00/igs/lib/imgconv_m
t.so] of type [IMGCONV] loaded and enabled
[Thr 01] [InterpreterManager::LoadInterpretersFromPath] Interpreter [/usr/sap/BP1/DVEBMGS00/igs/lib/zipper_mt
.so] of type [ZIPPER] loaded and enabled
[Thr 2057] Thu Jul 27 18:59:29 2006
[Thr 2057] [Portwatcher::Ping] Ping was unsuccessfull 1 times
[Thr 2057] Thu Jul 27 18:59:59 2006
[Thr 2057] [Portwatcher::Ping] Ping was unsuccessfull 2 times
Please help
Thanks
Rajeev Goel

IGS error (: Error When Calling Up IGS (ListenerRfc: unknown error))

Hi,
We have recently upgraded to NW04S.
Most of our BW reports( SAP delivered or custom, web template or not ) work fine with the IGS, while some reports don't, We receive a message from the Enterprise Portal ( Error When Calling Up IGS (ListenerRfc: unknown error)). No other details are available
We have checked and found out the related web templates are actually activates properly. From the same business content, we find some repports work and some don't, all however use web template.
Has anybody expoerienced the same? Please help.
   Thanks
Arunava

Hi AHP,
   1> BW_IGS_ADMIN when executed showed me some charts with some statictics and status etc. However as mentioned the other report BW_IGS_CHART_TEST just shows me a blank screen.
    2> SM59 connection test for the IGS RFC IGS_RFC_DEST is successful
    3> Ping on the Gateway Host( for the RFS dest) works fine as well.
    4> Also as I mentioned earlier, some of the reports using web teamplate works fine where some are not.
    5> when I do the RFC trace ( since I get an "Error When Calling Up IGS (ListenerRfc: unknown error) ) via ST01 for the query , in the BI sysatem, I get an error 'Prog:CL_IGS_CHART==================CPRow:'.
   Please let me know how do I proceed further.
Thanks
Arunava

Error when calling up IGS(listenerrfc: unknown error)

Hello,
We have integrated IGS 640.2 running on os windows 2003 64 bit(BW 3.5) .When i call the IGS chart from the EP portal i am getting the following error messge
Error when calling up IGS(listenerrfc: unknown error)
When i run the report GRAPHICS_IGS_ADMIN i am getting a blank screen.
This is in the case of production server.
I am getting the graph when i run report GRAPHICS_IGS_ADMIN in my BW quality server ( with same version IGS 640.2 os windows 2003 32 bit).
I have followed the below stpes for re-constructionin BW prod:
Followed the Snote 458731
1. Checked the Rfc destination 'GFW_ITS_RFC_DEST' amd 'IGS_RFC_DEST'
2. I can see the monitoring page when i run http://IGSHOST:LISTENERHTTPPORT
3. Program id and gateway is properly maintained
4. It is not generating any dumps when i set the dump status to "dump_on"
but in BW quality - dump file is getting generated
I can't switch on trace because it requires resatrt of teh server which is not possible in production.
I can see service called SAP IGS in BW qualitybut it is missing BW production.
Apart from that evrything looks similar in both quality and production server.
Can anyone advice me on how to fix this issue.
Appreciate your response.
Thanks in advance.
Vadi

Check the following Note : 454042
In rz20 you can find the IGS as the Internet Graphics Server in the monitor set SAP CCMS Monitors for Optional Components.
When you double-click on this entry a hierarchy with performance values should be displayed. If no hierarchy is displayed, even though the IGS is running, call transaction se38 and execute the program graphics_igs_admin. Choose Environment ® Switch on CCMS to activate the IGS display in rz20.

Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
Bruno

Hi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James

RFC call failed : Error when opening an RFC connection

Hi,
As a result of "Start Data Collection" operation in the t-code RZ70, I have got this error.
"RFC call failed : Error when opening an RFC connection"
Others things are with success message.
Regards,
Bala Raja

hi
check this links
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
also check Tcode: SLDAPICUST.
run tcode SLDCHECK? any error?
Thanks
Rodrigo
PS: If useful reward points

Error when opening an RFC connection in IDT

Hi Experts,
I m trying to create a relational connection (JCO) from IDT to BW 7.4, and I m getting the following error:
Error when opening an RFC connection (CPIC-CALL: ' ThSAPOCMINIT', communication
I searched this error in Internet and I found many discussions about it ...And I think it's about autorizations in BW system that by default dosen't allow external servers to connect to it.
So, I changed the values for the following parameters in RZ11 t-code:
gw/acl_mode = 0
gw/reg_no_conn_info = 0
But I still get the same error ...When I checked the SM59 t-code I found that IDT create an entry in TCP/Ip connections ...
Can you guide me to solve this issue...
BW server is 7.4 version on AIX OS
BO server is 4.1 SP05 on windows system
Thank's a lot for your help.
Abdess,

Hi,
test the RFC connection in sm59.If it is sussecfull then try to create conneciton otherwise see the error message.
Amit

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

STMS: RFC error: Error when opening an RFC connection

Hello ,
I was wondering if you could help me with this TMS issue.
The transport system is not working properly.
The fallowing error is shown:
Could not start transport control program tp
RFC error: Error when opening an RFC connection
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 3
RFC error text: Error when opening an RFC connection
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
When I test the tp tools:
tp Call and RFC Ping: Error when opening an RFC connection
Another thing would be that when testing the RFC connection CALLTP_Linux I have the error:
ERROR: user XXX is not authorized to start TP /usr/sap/SID/DVEBMGS53/exe
And I have to say that the user has maximum authorizations.
I also checked the permissions of the tp at OS level but everything seems to be ok.
Can you help me with this?
BR,
Manoliv

Dear Manoliv,
Firstly please check if you have enough space in /usr/sap/trans file system.
If OK, please run RSTPTEST report from SE38 and check the log file in SMGW => Goto => Trace => Gateways => Display file
and paste the log here.
Also, I assume filesystem permissions are OK.
Regards,
Sujit.

HTTP_POST - Error when opening an RFC connection

Performing POST-query. Works well in simple program, and in WebDynpro application:
<i>Error when opening an RFC connection</i>
l_dest      = 'SAPHTTP'.
    CALL FUNCTION 'HTTP_POST'
      EXPORTING
       absolute_uri                       = l_uri
       rfc_destination                    = l_dest
       user                               = l_username
       password                           = l_password
       blankstocrlf                       = 'Y'
      REQUEST_ENTITY_BODY_LENGTH        =
      PROXY                             =
      PROXY_USER                        =
      PROXY_PASSWORD                    =
     IMPORTING
       status_code                        = l_status
       status_text                        = l_statustext
       response_entity_body_length        = l_rlength
      TABLES
       request_entity_body                = req_body
       request_headers                    = req_headers
       response_entity_body               = res_body
       response_headers                   = res_headers
     EXCEPTIONS
       connect_failed                    = 1
       timeout                           = 2
       internal_error                    = 3
       tcpip_error                       = 4
       system_failure                    = 5
       communication_failure             = 6
       OTHERS                            = 7
Edited by: S S on Nov 28, 2008 4:01 PM

You can't use SAPHTTP for the destination. This RFC destination uses the SAPGUI to make the HTTP call. Either use SAPHTTPA (the A stands for Application Server) or better yet use the newer CL_HTTP_CLIENT class. The class uses the ICM instead of a standalone executable to make HTTP calls.

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

Error when calling a Webservice's public method in Forms10g

Hi,
I'm getting the following error when calling a webservice's public method, i'm using Forms10g 10.1.2.3
java.rmi.RemoteException; nested exception is: HTTP transport error javax.xml.soap.SOAPException
java.security.PrivilegedActionException javax.xml.soap.SOAPException
Message send failed javax.net.ssl.SSLException SSL handshake failed X509CertChI have added the Jar containing the client proxy in both Classpaths(system variable and default.env), the jar has been made with jdk 1.4
I also have tested the client proxy from jDeveloper and it's working there, but in Forms i'm getting this error.
I guess my problem might be that i'm calling a webservice that is secured since the url starts with https
what should i do to fix this ??
Regards
Carlos

I understand, so i have a doubt, why the webservice works on jDeveloper ??Not just JDeveloper even soapUI and Neatbeans have a way of working without a client certificate installed.
I do not know how they achieve it. I know that they work without a client DC.
Cheers,
PS: See this http://stackoverflow.com/questions/8887434/webservices-ssl-https, it offers a clue.
The java programs run unhindered when one-way authentication is being used. These products ship with a digital certificate that is in the path of most popular CAs.
Corollary, if the Web Server is configured for mutual authentication then you need to install and configure the client certificate in the tools.
Edited by: Prabodh on Dec 5, 2012 8:36 PM

ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
Ravi

Duplicate post ... please ignore.

ORA-03115 error when calling a Stored Procedure

Hi All,
I'm in the process of porting a Pro/C app from NT to Linux. I've installed 8.1.5 on our Linux box and patched it up to 8.1.5.02.
It all kind of works ok, except that I'm sometimes getting ORA-03115 errors when the app calls a stored procedure. The call in question looks like this:
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR resprows[50][3998];
int numret = 0;
int numrows= 50;
int done= 0;
unsigned long resp_id = 0;
EXEC SQL END DECLARE SECTION;
EXEC SQL AT DB_NAME EXECUTE
BEGIN pkg_something.getdata(
:resp_id, /* IN */
:numrows, /* IN */
:done, /* OUT */
:resprows, /* OUT */
:numret /* OUT */
END;
END-EXEC;
The stored procedure basically uses the resp_id value to select rows from a table;
in each row there is a VARCHAR2(4000) column which it copies into the hostarray resprows.
There may be anything from 1 to numrows returned from the SP.
Initially, the resprows rows were defined to be size [4000]. Unfortunately, this caused ORA-02005 errors - I then changed the size to [3998], which seemed to fix the 02005's (although I'm unclear as to the reasons why).
Now I'm getting the 03115 errors when calling the SP. The oracle manual is not very helpful on what this error means.
This all works chipper on NT.
Any ideas?
Thanks in advance,
Nigel.
PS: The database the app is talking to is still hosted on NT.
null

Histon FTM wrote:
ORA-04063: package body "LAZARUS.LAZARUS" has errors Above, obviously conflicts with the statement that follows:
>
The procedure and package have both compiled without errors and the statement on its own works fine in SQL*Plus.I suggest you take a look in the USER_ERRORS view to see, what the errors are.
And just checking:
You have schema called LAZARUS, which holds a package named LAZARUS, which holds a procedure called POPULATEGRIDPOSITIONS?
Edited by: Toon Koppelaars on Oct 1, 2009 5:55 PM

401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
then Build{...} Dictionary (Output to Variable:requestHeaders)
then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
The RequestHeader is set to the requestHeaders variable though the web service call properties
then Log Variable:responseCode to the workflow history list
After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
Thank You for any insight

Hi,
According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
Please make sure you use the ‘Call HTTP Web Service’ correctly.
You can enter the URL into the brower to check whether it is correctly.
You need to
create the Request header requestHeaders
using a Dictionary:
Accept : application/json;odata=verbose
Content-Type : application/json;odata=verbose
To associate the
requestHeaders variable, select the Call action
property, set the RequestHeaders property to
requestHeaders.
Please refer to the following articles:
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
Calling the SharePoint 2013 Rest API from a SharePoint Designer
Workflow
In addtion, you need to make sure you install the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error When Calling Up IGS (Error opening an RFC connection.)

Similar Messages

Maybe you are looking for