Error When Changing Modules

Hey, all. I just got Lightroom 5.3 for my Macbook Pro and have been attempting to use it for the past several days, but regardless of what I try nothing works -- I have spent several hours on the Adobe troubleshooting website going through every procedure several times and no luck. I've run disk recovery and tried everything including changing my Lightroom preferences to "read & write". Nada. Help! Seriously.

Try removing the Prefence file with Lr closed and reopening. It can be found here: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html

Similar Messages

  • 'Error when changing modules' message in Trial LR CC. Cant import photos.

    I downloaded Lightroom CC trial 4 days ago. I have LR 1 and run an iMac 2.7gh. LR does not recognise a camera card when inserted in the iMac, nor does it appear to have any Import command available in the File Menu. Had the trial 4days so far and haven't imported a single image :-(

    Luckily they are still on my old computer if I have to do it that way.<<<</div>
    That's probably the best thing to do but, before you do, you really should trash what remains of your old library. Tampering with the iPhoto library is appropriate only for those that enjoy bleeding ulcers! Force yourself to do everything from INSIDE iPhoto and leave the file/folder management to iPhoto.
    By the way, feel free to experiment from inside iPhoto. Contrary to your experience, it's pretty much unbreakable from that perspective. You'll be pleasantly surprised when you learn what can be done.
    You'll notice that iPhoto has its own trash can. It's separate from the OS trash can but it functions similarly. DON'T empty the trash until you're certain that you don't ever want to see the photo again.
    "Regular" albums contain only aliases (short-cuts) so deleting from there does not delete the photo from the library. HOWEVER, I've been told that deleting from "Smart" Albums DOES delete from the library. I don't use Smart Albums (I'm not smart enough) so I can't confirm that from personal experiences.

  • Error Message when changing modules??? Help

    Having issues - new MBP computer - so reloading all my cloud apps - LR5.5 will NOT work and I've tried everything - I keep getting the Error when changing modules message.  I am beyond fried at this point.

    Hi hillclimbing,
    Can you please let me know the exact error message you see as that would be helpful.
    Does this occur with all the pdf files.
    What OS and Acrobat version are you using?
    Regards,
    Rave

  • I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

    When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

    Ah, see, you said you had done it differently before.
    > and I tried to add a toolbox button by navigating to AcroPDF.dll.
    You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
    Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

  • Lightroom 5, can't open..an error occurred when changing modules

    I got Lightroom 4 with a new camera.  couldn't install on my Mac so purchased  (full price) lightroom 5.   Retrieved my key and downloaded and installed on the Mac.  Lightroom is there, but when I try to open in says "an error occurred when changing modules".  I have uninstalled and reinstalled several times.  Went online and tried some suggestions but nothing works.  I have had no problems running or using LR5 on my PC.  I really like the program...I don't know what to do next. Running OS X 10.9.2.

    Moving this discussion to the Photoshop Lightroom forum.

  • I have installed lightroom 4 onto my mac but when i try to activate it, it gives me an error message that says "error in changing modules"

    error in changing modules when i try to activate the program

    Moving this discussion to the Photoshop Lightroom forum.

  • Error while changing modules

    On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.

    Hi Atul Saini.
    It is unbelievable how miserable the ADOBE support is.
    Iam sorry - but Iam awaiting answers, as we are paying
    since nearly a month and Lightroom does not work at all.
    Can you help or what is happening?
    Thanks.
    Really angry.
    Julia Ufer
    2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
        Error while changing between modules
    Jeff A Wright
    <https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
    marked Atul_saini123
    <https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
    reply on Error while changing between modules
    <https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
    helpful. View the full reply
    <https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

  • I'm a Mac user, at the start of Adobe Lightroom I receive an error of changing modules. How can I solve the problem?

    I'm a Mac user, at the start of Adobe Lightroom I receive an error of changing modules. How can I solve the problem?

    Error changing modules | Lightroom
    Mylenium

  • Error message changing modules

    Contine to get error message:  " An error occurred when attempting to change module.  Have loaded and reloaded.  No change.  What can I do?  Thanks

    See if these troubleshooting tips help:
    http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom.html

  • Error in changing  modules

    I bought a new Macair for travel. Also complete
    Nik software and LR4. When opening Lr4, it states
    Error changing modules??
    Have tried uninstalling.additional suggestions?

    Moving this discussion to the Photoshop Lightroom forum.

  • UNCAUGHT_EXCEPTION runtime errors when changing the PO

    Hi everyone,
    We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
    I don't know what is the exactly that cause of this problem
    Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
    Thanks,
    quare

    Hi Disha,
    I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_BBP_PD_ABORT
    Error analysis
        An exception occurred. This exception is dealt with in more detail below
        . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
         caught,
        which led to a runtime error.
        The reason for this exception is:
        Übernehmen
    After further search of error there is also message that relates to this error:
    Buffer table not up to date
    Message no. BBP_PD001
    Diagnosis
    In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
    Procedure
    Start the transaction again. If the error occurs again, create an OSS message.
    To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
    I wondering what is the problem. Since it occurs not for all PO but certain PO only.
    Please help.
    Thanks,
    quare

  • Why do I get a program error when changing colors?

    I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette.  Is there a patch for this?
    I am using Photoshop CS6 version 13.0.1.x64

    Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

  • Inbound Processing : Error when changing a BOM

    Hi Experts,
    I have the following error when I send a BOMMAT IDoc in "Change" Mode (Editing the BOM, to recreate the History inthe Target system) :
    Start processing in API: CSAP_MAT_BOM_MAINTAIN
    Group BOM
    Changes to the BOM exist after 03.11.2008
    Date 03.11.2008 copied from change number
    Item (1) 0040 L 000000001084237016 000000000000000000000000  cannot be uniquely identified
    Item (3) 0100 L 000000001084237021 000000000000000000000000  cannot be uniquely identified
    Item (6) 0200 L 000000000768041196 000000000000000000000000  cannot be uniquely identified
    End of processing in API: CSAP_MAT_BOM_MAINTAIN
    Any idea ?
    Regards,
    David

    Hi Gordon,
    I think I found something.
    When I create a BOM with ALE in the Target, no problem. Then when I want to update it, I've got this error ...
    In the Source, we're working with Text Object for Text Item (INCLUDE Text ID). But in the Target, Text Object doesn't exist, and when we update or modify the BOM via ALE, the Inbound Process try to find the old Text Object before updating it with the new one ...
    I think the solution is to create all Text Object/ID (Ta SO10) in the Target ... I don't understand why the ALE Inbound Process doesn't create Text Objects if they don't exist...
    Regards,
    David

  • Satellite M40: Graphic Errors when changing screen resolution

    Hi,
    I have a Satellite M40 and a big problem.
    in windows xp pro sp2:
    when a program changes the screen resolution, the screen gets messed up,
    I see only stripes and only a restart can get it back working (or suspend to disk).
    [edit]
    I plugged an external monitor to the laptop and it works,
    the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
    [/edit]
    in linux:
    this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
    Here are some pictures of this strange behavior:
    http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
    http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
    http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
    It looks like a hardware problem, but could it be just a wrong bios setting?
    What can I do?
    Bye and thanks in advance, Ronny
    Message was edited by: [email protected]_DE

    I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
    I use 1280x800 as normal resolution
    programs giving this error:
    world of warcraft (1024x768) -> working with 1280x800
    age of empires 2 (800x600)
    as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
    thanks you too, hope we can get it working together :-)
    [edit]
    strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
    [/edit]
    Message was edited by: [email protected]_DE

  • Error when changing the length of IO

    Hi Experts,
    I have changed the length of one of my Info-Object from NUMC-2 to NUMC-3. While trying to activate it it is giving the error "Structure Change at field Level(change Table)".
    But When i changed the length of one more IO before from Char-1 to Char-3, it successfully got activated.
    Please help me out.
    Regards,
    Pavan

    Hi Ananda,
    We cannot delete the master data.
    Can Anyone pleasetell me why this IO is not getting activated when i change length from NUMC2 to NUMC3
    I didn't face any problem when i changed the length of one of my IO from Char-1 to Char-3. It successfully got activated
    But im facing this problem when I try to change the length of another IO from NUMC-2 to NUMC-3.
    If anyone any any solution for this otherthan deleting the existing data, please do let me know.
    Regards,
    Pavan

Maybe you are looking for