Error when changing OID instance SSL port to 636

I have OID 11.1.1.6 instance running on port 3065 for it's SSL port. I wanted to change the SSL port to 636 from the em console. When I request to change it, it says it was successful...restart the OID server. Once the OID instance is restarted and comes back up, I get an error "Failed to load server configuration" Check the Internet Directory Server logs. Possible Error: "<hostname>:636>
Do I need to run/restart other services for this change?
I also tried extending the domain and creating a new instance using the staticports.ini. I specified the SSL port in there at 636 and ran the oracleRoot.sh script but get the same error when I look at it in em console.

Hey,
1)Did you follow these steps 'Configuring Ssl by Fusion Middleware Control'?
Link: http://docs.oracle.com/cd/E14571_01/oid.1111/e10029/ssl.htm#CHDJHGGC
Also,
2)When you type from command line: opmnctl status -l , what ports OID is showing to you?
If 1) did not resolve your issue, can you pls provide oid logs that you are receiving?
I hope this helps,
Thiago Leoncio.

Similar Messages

Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance

IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODE

It is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards.

Error when install OID 10.1.2.0.2

Dear gurus,
i'd like to install infrastructure 10.1.2.0.2 in 2 computers - my point is, create as guard or infrastructure guard -, but i don't install Metadata Repository. so only install OID and single sign on. and for Metadata Repository i pointed to single database instance 10.2.0.1.
but i found problem, the error message told that "Install has determined that OID schema in this Metadata Repository is not correct version to support this version of Identity Management. You must have an OID schema version 10.1.2.0.2 to 10.1.2.9.9. Please select another Metadata Repository or upgrade the OID schema in this Metadata Repository to a compatible version."
i found this error when the installation "specify repository" section. need you help. Many Thanks.
Regards,
Andes
Edited by: andes on Jul 17, 2009 1:28 AM

I solved the problem bout the error, it turned out i had to install ultrasearch on my existing database 10.2.0.1. then create wksys schema.
but i found another error, after succes loading schema Metadata Repository in existing database, then i installed OID only but in "Specify Repository" section, when i pointed the database, it showed error message "The Oracle Application Server Metadata Repository that you have specified is not a compatible version for configuring Oracle Internet Directory. Please specify another database."
Need help.
Many Thanks,

Facing an error when change the sysadmin password

hi expert,
when i am going to change the sysadmin password i m facing the below error on linux in production environment. i cant understand why this error occured. i change the sysadmin password many times but never get any error. when going to change the sysadmin password the production instance is open.
[applprod@oracleerp ~]$ FNDCPASS apps/apps 0 Y system/manager USER SYSADMIN sys@adm!n
-bash: !n: event not found
plz suggest how can i resolve the above error.
thanks & regards
pritesh ranjan

Hi Pritesh Ranjan,
plz suggest me one thing can i change sys password directly without down the ebs application same as system user.
exp -
alter user system identified by manager;
for sys
alter user sys identified by oracle123; (in production environment without down the ebs application)
Yes, you can change without restarting the ebs application.
And your syntax seems fine.
Thanks &
Best Regards,

Why do I get a program error when changing colors?

I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette. Is there a patch for this?
I am using Photoshop CS6 version 13.0.1.x64

Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

Inbound Processing : Error when changing a BOM

Hi Experts,
I have the following error when I send a BOMMAT IDoc in "Change" Mode (Editing the BOM, to recreate the History inthe Target system) :
Start processing in API: CSAP_MAT_BOM_MAINTAIN
Group BOM
Changes to the BOM exist after 03.11.2008
Date 03.11.2008 copied from change number
Item (1) 0040 L 000000001084237016 000000000000000000000000 cannot be uniquely identified
Item (3) 0100 L 000000001084237021 000000000000000000000000 cannot be uniquely identified
Item (6) 0200 L 000000000768041196 000000000000000000000000 cannot be uniquely identified
End of processing in API: CSAP_MAT_BOM_MAINTAIN
Any idea ?
Regards,
David

Hi Gordon,
I think I found something.
When I create a BOM with ALE in the Target, no problem. Then when I want to update it, I've got this error ...
In the Source, we're working with Text Object for Text Item (INCLUDE Text ID). But in the Target, Text Object doesn't exist, and when we update or modify the BOM via ALE, the Inbound Process try to find the old Text Object before updating it with the new one ...
I think the solution is to create all Text Object/ID (Ta SO10) in the Target ... I don't understand why the ALE Inbound Process doesn't create Text Objects if they don't exist...
Regards,
David

Satellite M40: Graphic Errors when changing screen resolution

Hi,
I have a Satellite M40 and a big problem.
in windows xp pro sp2:
when a program changes the screen resolution, the screen gets messed up,
I see only stripes and only a restart can get it back working (or suspend to disk).
[edit]
I plugged an external monitor to the laptop and it works,
the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
[/edit]
in linux:
this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
Here are some pictures of this strange behavior:
http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
It looks like a hardware problem, but could it be just a wrong bios setting?
What can I do?
Bye and thanks in advance, Ronny
Message was edited by: [email protected]_DE

I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
I use 1280x800 as normal resolution
programs giving this error:
world of warcraft (1024x768) -> working with 1280x800
age of empires 2 (800x600)
as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
thanks you too, hope we can get it working together :-)
[edit]
strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
[/edit]
Message was edited by: [email protected]_DE

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Error when create UDS instance

Dear All,
I got an error message when creating UDS instance, the message is "Error:0x80040153 Invalid value for registry".
The UDS server and OPC server is running on different windows PC. In the UDS Admin Console, I create a new OPC-DA instance. Then I was trying to point the OPC server to Matrikon Simulation Server on another PC. I input the machine name and then key enter. Then above error message appeared. When I pointed OPC server to the Matrikon Simulation Server on localhost. It worked well.
Please advice if you had ever experience on it before.
THanks & Regards,
James

James,
Did you look closely at the Planning section on page 2 in the UDS Installation Guide: http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000705232&_SCENARIO=01100035870000000112&_OBJECT=012002523100006323502008E
Did you account for the OPC Foundation portion of this which would be required by the UDS in order to communicate to the other server (uses DCOM)? This is not part of the UDS installation, but is necessary (similar to needing the PI-API installed before using the PI UDS s/w).
Regards,
Jeremy

Error when changing the length of IO

Hi Experts,
I have changed the length of one of my Info-Object from NUMC-2 to NUMC-3. While trying to activate it it is giving the error "Structure Change at field Level(change Table)".
But When i changed the length of one more IO before from Char-1 to Char-3, it successfully got activated.
Please help me out.
Regards,
Pavan

Hi Ananda,
We cannot delete the master data.
Can Anyone pleasetell me why this IO is not getting activated when i change length from NUMC2 to NUMC3
I didn't face any problem when i changed the length of one of my IO from Char-1 to Char-3. It successfully got activated
But im facing this problem when I try to change the length of another IO from NUMC-2 to NUMC-3.
If anyone any any solution for this otherthan deleting the existing data, please do let me know.
Regards,
Pavan

Weird error when clicking on instance- flow from the console

When I have heavy volume coming in for the bpel server(ex: hundreds of instances generated at a time), I see the following weird error when I am trying to see the instance flow from console:
Process state off. The process class "BugBAM" (revision "v2004_12_20__61032" ) has not been turned on. No operations on the process or any instances belonging to the process may be performed if the process is off. Please consult your administrator if this process has been turned off inadvertently.
I didn't do anything to the process to turn the state off. What does this error message mean?
Thanks, Jenny

I am assuming that you are using 10.1.2 beta 1. Is that correct? I am wondering if in that version there is a switch that turns a process off when a new version of the process is deployed (this would be a bug because the active process should only be switched to retired).
Next time you get this error, could you please go to the BPEL Console and check the state of the BPEL process.
We will try to trace the error message in the source code and try to determine if there are other circumpstances which would generate the same error code.
Edwin

Debug error when changing blending modes

Hi there,
I get a Debug Error every time I use 2 Adjustment Layers one above each other, with the following effects applied:
Adjustment Layer Above:
- Tint, not keyframed
- Opacity Blending Mode: Color Dodge
Adjustment Layer Below:
- Venetian Blinds, not keyframed
- Offset, keyframed
- Turbulent Displace, keyframed
- Opacity Blending Mode: Normal
Media layer below:
- JPG, Canon 60D - 5184x3456 - no effects applied
The error I get (option to 'Continue', but the program doesn't respond and needs to be closed):
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\CutlistRenderer.cpp-717]
Error in Events panel:
An input contract violation has occurred!
I first started to get this error, while working with various media files in 1440x1080/HDV 1080i mode (Sony Z7U native)/29.97fps/1.33 sequence. Trying to understand what it goes wrong, I created a new project and recreated the adjustment layers (AL) with same effects applied - the only thing changed was the JPG added as media under both ALs. Same debug errors every time the blending is changed from normal to any other blending mode. With normal blending on the AL above, everything is fine.
After further testing, it looks like even with only one AL (no effects) above the JPG, get the same debug error when blending is changed from normal to any other mode.
Important note: Same layer+effect configuration applied in 1920x1080/ARRI Cinema mode/24fps/1.0 sequence - it works with no debug error. Haven't tried any other editing modes yet.
Layers, in order from top:
- AL (Venetian Blinds, Tint, Offset, Turbulent Displace - Color Dodge blending)
- AL (Venetian Blinds, Tint, Offset, Turbulent Displace - Normal blending)
- AL (Timecode effect)
- Title
- media, MPEG (1440x1080, 29.97 frame rate, 1.3333 pixel aspect ratio)
- After Effects composition (dynamic link) 1920x1080 - content: media file, MPEG (640x480, 30fps, 1.0 + various titles and effects, including color dodge blending
I googled for similar error reports, there are none related to Premiere Pro.
I don't know what else to do, rather than just avoid using this effect configuration.
Does anyone else had this issue, even in different situations?
Thank you very much for any feedback.
Best,
Mark
Hardware:
HP Z820
Dual Xeon E5-2643 - driver 6.1.7600.16385
Dual nVidia Quadro 4000 - driver 8.17.12.7628
64GB RAM
SSD 250GB for System
HDD 3TB for Media
Software (up to date):
Adobe Premiere Pro CS6 - Version 6.0.3 (001 (MC: 264587))
Windows 7 x64 - 6.1.7601 Service Pack 1 Build 7601

I've never seen that error myself. If you have a way to avoid it, might be best to just do that.

Error when using OID configuration assistant

Hi all !
I meet a problem of configuration with OID.
When using OID configuration assistant, and after modifying super user password page, the OID stops, and i get on the console, the error : " Configuration Exception, error number 16".
I have done this operation a second time, and the error is now 5.
I don't know what these errors means, and where i can find a solution, or an explication, do you know where ??
thanks you very much !
SB

Hi all !
I meet a problem of configuration with OID.
When using OID configuration assistant, and after modifying super user password page, the OID stops, and i get on the console, the error : " Configuration Exception, error number 16".
I have done this operation a second time, and the error is now 5.
I don't know what these errors means, and where i can find a solution, or an explication, do you know where ??
thanks you very much !
SB

ACS SE: Error when changing IP setting

I got this error when trying to change the IP address setting:
Error: Failed to get NIC configuration: (null) (FFFFFFFF)
My ACS SE is now not functioning because of this. Is there any way to recover besides using the Recovery CD ?

Does this happen to small number of network devices or the whole set
If the former then I found the following CDETS
CSCtw59271 Random Network Device corruption after upgrade from ACS 5.2 to 5.3
Which includes the following workaround
Symptom 1: Delete and re-add the AAA client
Symptom 2:Modify the TACACS+ shared secret of the Network Device, re-enter the same key and save the Network device.
>>>> Use case where TACACS+ was used
There are some important fixes related to upgrade issues in patch 5 and later for ACS 5.3. While these do not relate to NDs I do recommend installing this patch

Error when changing BPM: "Insufficient access privileges"

Hello, Logic Express gurus:
I am just a lowly fitness instructor trying to mix her own music (self taught DJ). When changing the BPM here's what I do:
I double click on the song track, then from the window that pops up, I click on the "Factory" pull down menu, then choose "Temp and Pitch Machine". When I change the BPM to the desired tempo and click "Process & Paste", I get the following error:
"Insufficient access privileges for operation (Result code -5000)", then another error stating:
"Error when creating temp file!"
It used to work beautifully. Can anyone assist me? Thanks.

Thanks for the reply, Matt. I tried your suggestion, but it did not make a difference in the tempo. I am bringing in MPEGs, by the way.
My method was working fine until I began getting this error message. Any further suggestions from you or anyone?

Error when changing OID instance SSL port to 636

Similar Messages

Maybe you are looking for