Error when changing the length of IO

Hi Experts,
I have changed the length of one of my Info-Object from NUMC-2 to NUMC-3. While trying to activate it it is giving the error "Structure Change at field Level(change Table)".
But When i changed the length of one more IO before from Char-1 to Char-3, it successfully got activated.
Please help me out.
Regards,
Pavan

Hi Ananda,
We cannot delete the master data.
Can Anyone pleasetell me why this IO is not getting activated when i change length from NUMC2 to NUMC3
I didn't face any problem when i changed the length of one of my IO from Char-1 to Char-3. It successfully got activated
But im facing this problem when I try to change the length of another IO from NUMC-2 to NUMC-3.
If anyone any any solution for this otherthan deleting the existing data, please do let me know.
Regards,
Pavan

Similar Messages

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Error when changing the POV period of a recurring journal

We recently upgraded from HFM 9.3.1 to 11.1.1.3 and are going through our first monthly close with the upgraded application. Everything had been working fine until today when one of the application administrators attempted to post a recurring journal. He was able to open the recurring journal, but after he set the POV to the current month, he received the following message:
An unknown error has occurred in the HsvDSJournals object.
Error Reference Number: {0A0091B8-E743-43B6-9EEC-42905B418393}
Num: 0x80042200;Type: 1;DTime: 8/5/2010 1:45:52 PM;Svr: USHYPAPPPRD05;File: CHsvDSJournals.cpp;Line: 10581;Ver: 11.1.1.3.0.2413;
Num: 0x80042200;Type: 0;DTime: 8/5/2010 1:45:52 PM;Svr: USHYPAPPPRD05;File: CHsvJournals.cpp;Line: 6405;Ver: 11.1.1.3.0.2413;
Looking at the log, I have matched this entry to our issue:
Error*11*UserName*08/05/2010 13:45:52*CHsvDSJournals.cpp*Line 2717*<?xml version="1.0"?>
<EStr><Ref>{94732759-98EF-4C0E-A944-D2DD5A51AEDA}</Ref><AppName>HOLX</AppName><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147217873</Num><Type>1</Type><DTime>8/5/2010 1:45:52 PM</DTime><Svr>USHYPAPPPRD05</Svr><File>CHsvDSJournals.cpp</File><Line>2717</Line><Ver>11.1.1.3.0.2413</Ver><DStr>INSERT INTO HOLX_JL_1_2010 (JOURNAL_ID, TYPE, STATUS, ATTRIBUTE, JOURNAL_GROUP, DESCRIPTION, LABEL, UNIQUE_LABEL, PERIOD_ID, VALUE_ID, SINGLE_ENTITY_ID, SINGLE_PARENT_ID, SECURITYCLASS_ID, CREATED_USER, POSTED_USER, APPROVED_USER, CREATED_DATE_TIME, POSTED_DATE_TIME, APPROVED_DATE_TIME) VALUES (HOLX_JL_1_2010_SEQ.NextVal, 4, 3, 2, NULL, N'Eliminate Profit in Ending Inventory', N'BED PEI', N'BED PEI', 67108873, 13, 53, 73, 2130706432, N'bredf@LDAP2MSAD', N'', N'bredf@LDAP2MSAD', 40395.5735069444, 0, 40395.5735069444)</DStr><PSec><Param>ORA-00001: unique constraint (HFM.PK_HOLX_JL_1_2010) violated</Param></PSec></ESec></EStr>
I am particularly interested in the last line of the log, unique constraint (HFM.PK_HOLX_JL_1_2010) violated</Param></PSec></ESec></EStr>. It appears as though the Oracle DB is throwing a unique constraint issue, but I'm not sure why, or how to go about troubleshooting the issue. Any help or guidance would be much appreciated!

If you have the clip in your viewer window
to change the speed it is in themotion tab.
I also use the right click alot and run in to this problem.
You could just pull the clip to the end of your timeline,
adjust the speed,
then place the clip back where you want it.
But that is not an efficent work flow
sz

Facing data type error when changing the order of fields in a query

Hello Experts
I am working on E sourcing 5.1.
I have a query with some filters . I want to change the position of a particular filter.
Basically I want to move a filter of type date to the top , so that it is the 1st parameter.
I was able to do this by reorder option.
However at runtime it gives me an error saying that "error u201CORA-00932: inconsistent datatypes: expected NUMBER got date."
Later I reverted back my changes so that the date filed is at its original position and faced no issues.
Query worked fine.
Is the order of filters important when executing a query.
Please suggest how can I move the date filter to the top of the query's filter list.
Regards
Vikas

Hello Vikas,
Its not the SELECT statements that you need to change. You have to change the WHERE caluse.
In the WHERE clause, some of the conditions will have some table column equated to a '?' symbol. This symbol is a place-holder for a filter prompt. There is a one-to-one correspondence between the '?' symbols and the filter prompts created in the query(under the Filter Prompt tab). This means that the first '?' corresponds to the first filter prompt, second '?' to the second filter prompt and so on.
Keeping the above information in mind, you can attempt to make changes to your query. You can duplicate your existing query and try your hands at it.
One more point worth mentioning : It is evident that if you need to use the same filter prompt at more than once place in the query definition, you have to create more than one instance of that query prompt.(Here by another instance I mean that the two filter prompts should have same values in their fields when you define them.) But even when you create more than one instance of a filter prompt, on the UI it will appear just as a single instance.
If things have become more confusing than before (of which there is a high probability ) then please go through the online help for Queries. It has got an extensive documenation and will be surely be of some help to you.
Good luck!!
Devesh

Remaining text error when changing the database in use

Hi
This is my first post on this forum. I tried searching for this problem but could not find anything.
I have a VS2005 Winforms application using a number of reports. The approach that I have taken is:
report = new ReportDocument();
report.Load(reportPath);
report.SetDataSource(dataSet.Tables["Data"]);
this.crystalViewer.ReportSource = report;
selectPanel.SetParameterValues(report);
where the datatable is populated with the results of a stored proc execution on SQL Server, and the last line is a virtual function that populates any parameters required by the report. The reports were originally created by referencing the stored proc on a test database, and everything worked great. The reports ran correctly in the design environment and in the application.
Then I moved the application to a production database on the same server. This was done by changing a connection string parameter used by the sproc that populates the dataset. Now all the reports, including several that take no parameters, fail with the error message:
The remaining text does not appear to be part of the formula
Error in formula <Record_Selection>
'UNUSED'
The remaining text does not appear to be part of the formula
None of the reports have a formula called <Record_Selection>, so I am assuming that this is an internal function of some sort.
The databases are essentially identical and I have tested the sprocs in the new database. I have also confirmed that the data table is correctly populated before the above code is executed.
Any ideas why this is happening and what I can do to stop this error?
Many thanks
Jonathan
Edited by: Jonathan Dienst on Sep 22, 2008 5:47 PM

Don
Thanks for responding.
The database connection is OLEDB for SQL Server, the report was built using this connection but the run-time data is not supplied by that connection. Rather the application populates the data table that is passed to the report's SetDataSource method. The application uses ADO.Net SQL native drivers.
I am using the report designer in VS2005.
I had assumed that I do not need to update the connection data for the report as the data is supplied in the data table. Does the report care about the connection if the data is supplied by a pre-filled data table?
My problems is that I do not have a report selection field in the reports itself, as the selection is controlled when the application fills the data table. The reports worked properly until I changed the application's connection string to the production database. Now I get this error.
I have confirmed that the data table contains the same data from the production database and the development database, so I am quite confused....
Any more thoughts?
Regards and thanks again
Jonathan

FRM-92101 error when changing the passwd when running Forms 10g application

Hi Friends,
Issue is with: Getting FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
Steps i followed.
1. Start th OC4J instance of the oracle 10g.
2. Login with one user/passward and opens Forms 10g application
3. By Using One Form, changed the passward of the current user.
4. then closed the Form and then try to close the Forms Application.At this stage i got an error message FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
I verified the log files but i did not get any relevent information
Please help in this scenario.
Regards
Madhava Rayalu

Could you paste the complete error message?
Does this works fine when you change the username /passwd for other users ?
Rajesh Alex

Facing an error when change the sysadmin password

hi expert,
when i am going to change the sysadmin password i m facing the below error on linux in production environment. i cant understand why this error occured. i change the sysadmin password many times but never get any error. when going to change the sysadmin password the production instance is open.
[applprod@oracleerp ~]$ FNDCPASS apps/apps 0 Y system/manager USER SYSADMIN sys@adm!n
-bash: !n: event not found
plz suggest how can i resolve the above error.
thanks & regards
pritesh ranjan

Hi Pritesh Ranjan,
plz suggest me one thing can i change sys password directly without down the ebs application same as system user.
exp -
alter user system identified by manager;
for sys
alter user sys identified by oracle123; (in production environment without down the ebs application)
Yes, you can change without restarting the ebs application.
And your syntax seems fine.
Thanks &
Best Regards,

Error when changing the color of the dashboard and exporting to PowerPoint

Dear All,
I have been facing an issue with exporting my dashboard to PowerPoint.
I did a first version of the dashboard, exported to PowerPoint and sent to a client. All worked fine and the client could open and customize the dashboard. After that, I was asked to change the color of all lines and backgrounds of the dashboard, so that it would fit the product colors we are working with.
After this color change, the client cannot open the PowerPoint with the dashboard anymore because an error message appears saying that "Microsoft PowerPoint has encountered a problem and needs to close. We are sorry for the inconvenience."
Some more details about the error are: AppName: powerpnt.exe; AppVer: 10.0.6842.0; ModName: ntdll.dll; ModVer: 5.1.2600.2180; Offset: 00010f29.
Any thoughts about what might be happening?
I'm working with Office 2007 and Xcelsius 2008 but I'm saving the ppt in the previous version because the client is working with Office 2003.
Thanks in advance,
Best Regards,
Vanessa

If you have the clip in your viewer window
to change the speed it is in themotion tab.
I also use the right click alot and run in to this problem.
You could just pull the clip to the end of your timeline,
adjust the speed,
then place the clip back where you want it.
But that is not an efficent work flow
sz

Milestone Error when changing the status of service request.

Hi Expert.
I got an issue where service request is displayed with an error "Item 10: Start and end dates must be identical for a milestone date".
I took around 200 service requests and observed that in the change history, the response profile of the contract was changed. We also observed that whenever service request contain these errors, automatic change of status is not happening.
Unfortunately I'm not able to reproduce this error in Quality system.
Kindly advice on how these errors can be resolved and how these can be reproduced.
Thanks in advance.

You can ave a runitme event or workflow triggered that can generate such behavior.
First increase logging on your object manager (evtloglvl :) ) and look at any error message.
Second assess with your development team what automation has been setup ranging from script, Business Services, workflow to assist you in troubleshooting.
Best Regards
Evtloglvl

Financial Reporting Studio - Error when changing the Alias

Hi,
We are using HFRS v 11.1.2.711 against a Planning application. After creating a Grid the Alias table needs changed from 'Default' to English'. As soon as the change is made we get the following error screen:
Run-time error '-2147467259 (80004005)';
; nested exception is;
java.lang.NullPointerException
Has anyone seen this before? Any help/suggestions are appreciated.
Thanks,
Keith

Make sure the FR applications on the server and the virtual machine are the exact same version.
(including servicepacks, servicefixes..)

Changing animation frame rate when rendering in photoshop does not change the length of the video?

I made a walk cycle animation in Photoshop CS6 and want to render it into a quicktime format. I'd like it to be 12 fps, but when I rendered it at 12 fps the video seemed to be missing frames, and the video was 3 seconds long. I have 98 frames to my animation; doing the math, at 12 fps it should be 8 seconds long. Not 3.
I was confused and for curiosity's sake I rendered the video at 6 fps, trying to really slow it down. The video ended up being STILL 3 seconds long and only maybe 20 frames. I was missing literally 70 frames. I'm so upset with this rendering thing, I could chuck my computer at the wall.
Does anybody know of a solution to this?
edit: If it means anything, I've tried rendering it straight from the frame view and the timeline view. Each time I render it I have the timeline frame rate match the rendering frame rate as well.

floriannaart wrote:
Changing animation frame rate when rendering in photoshop does not change the length of the video?
Photoshop CS6 and CC support two types of animation Frame animations and a Video Timeline
Changing the frame rate should not change the length of a video timeline. It should just change the number of frames that are rendered. To change the length of a video you need to change the length of the video timeline. If you increase the length of the timeline and there is audio I'm quite sure there will be a problem with it, The Video part will most likely be better then the sound. The required number of extra frames can be generated however the video may look like slow motion. If you decrease the length the motion will speed up. The length of a video is normally done be editing video clips which are trimmed and stitched together to get the desired duration. Not normally done by altering the duration of a clip.
The duration a of Frame animation is the sum of the times each frame is displayed. In a frame animation the length of time a frame is displayed can be varied it not a normal motion picture video. To have a smooth frame animation you need a sufficient number of frames that are different from each other to show smooth motion. You can use Photoshop Frame animation tween feature to have Photoshop manufacture frames to help with a smoothing the animation. Once you have a frame animation the length with the motion you want you can have Photoshop convert it to a video timeline and render a normal motion picture video. It will not have audio but you can add audio to it.

Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

Changing the length of a key field in a table

Hi,
I want to increase the length of the field from 2 to 4 in a standard SAP table and deliver it to the customers. This field is a key field in table. This field from this table is also used in view and view clusters.
What is the implication of changing the length to the customers. The customers would have already data in this field and they should not loose any data. Will the existing data for customers remain at length 2 or do they have to do some conversion?
Regards,
Srini.
Edited by: Srinivasa Raghavachar on Feb 7, 2008 12:45 PM

hi,
The database table can be adjusted to the changed definition in the ABAP Dictionary in three different
ways:
By deleting the database table and creating it again. The table on the database is deleted, the inactive
table is activated in the ABAP Dictionary, and the table is created again on the database. Data
existing in the table is lost.
By changing the database catalog (ALTER TABLE). The definition of the table on the database is
simply changed. Existing data is retained. However, indexes on the table might have to be built again.
By converting the table. This is the most time-consuming way to adjust a structure.
If the table does not contain any data, it is deleted in the database and created again with its new
structure. If data exists in the table, there is an attempt to adjust the structure with ALTER TABLE. If the
database system used is not able to do so, the structure is adjusted by converting the table.
Field 1     Field 2,    Field 3
NUMC,6 CHAR 8    CHAR, 60
Field 1    Field 2       Field 3
NUMC,6 CHAR, 8     CHAR,30
The following example shows the steps necessary during conversion.
Starting situation: Table TAB was changed in the ABAP Dictionary. The length of field 3 was reduced
from 60 to 30 places.
The ABAP Dictionary therefore has an active (field 3 has a length of 60 places) and an inactive (field 3
still has 30 places) version of the table.
The active version of the table was created in the database, which means that field 3 currently has 60
places in the database. A secondary index with the ID A11, which was also created in the database, is
defined for the table in the ABAP Dictionary.
The table already contains data.
Step 1: The table is locked against further structure changes. If the conversion terminates due to an
error, the table remains locked. This lock mechanism prevents further structure changes from being
made before the conversion has been completed correctly. Data could be lost in such a case.
Step 2: The table in the database is renamed. All the indexes on the table are deleted. The name of the
new (temporary) table is defined by the prefix QCM and the table name. The name of the temporary
Step 3: The inactive version of the table is activated in the ABAP Dictionary. The table is created on the
database with its new structure and with the primary index. The structure of the database table is the
same as the structure in the ABAP Dictinary after this step. The database table, however, does not
contain any data.
The system also tries to set a database lock for the table being converted. If the lock is set, application
programs cannot write to the table during the conversion.
The conversion is continued, however, even if the database lock cannot be set. In such a case
application programs can write to the table. Since in such a case not all of the data might have been
loaded back into the table, the table data might be inconsistent.
You should therefore always make sure that no applications access the table being converted
during the conversion process.
Step 4: The data is loaded back from the temporary table (QCM table) to the new table (with MOVECORRESPONDING).
The data exists in the database table and in the temporary table after this step.
When you reduce the size of fields, for example, the extra places are truncated when you reload the
data.
Since the data exists in both the original table and temporary table during the conversion, the storage
requirements increase during the process. You should therefore verify that sufficient space is available in
the corresponding tablespace before converting large tables.
There is a database commit after 16 MB when you copy the data from the QCM table to the original
table. A conversion process therefore needs 16 MB resources in the rollback segment. The existing
database lock is released with the Commit and then requested again before the next data area to be
converted is edited.
When you reduce the size of keys, only one record can be reloaded if there are several records whose
key cannot be distinguished. It is not possible to say which record this will be. In such a case you should
clean up the data of the table before converting.
Step 5: The secondary indexes defined in the ABAP Dictionary for the table are created again.
Step 6: The temporary table (QCM table) is deleted.
Step 7: The lock set at the beginning of the conversion is deleted.
If the conversion terminates, the table remains locked and a restart log is written.
Caution: The data of a table is not consistent during conversion. Programs therefore should not access
the table during conversion. Otherwise a program could for example use incorrect data when reading the
table since not all the records were copied back from the temporary table. Conversions therefore
should not run during production! You must at least deactivate all the applications that use tables to
be converted.
You must clean up terminated conversions. Programs that access the table might otherwise run
incorrectly. In this case you must find out why the conversion terminated (for example overflow of the
corresponding tablespace) and correct it. Then continue the terminated conversion.
Since the data exists in both the original table and temporary table during conversion, the storage
requirements increase during conversion. If the tablespace overflows when you reload the data from the
temporary table, the conversion will terminate. In this case you must extend the tablespace and start the
conversion in the database utility again.
If you shorten the key of a table (for example when you remove or shorten the field length of key fields),
you cannot distinguish between the new keys of existing records of the table. When you reload the data
from the temporary table, only one of these records can be loaded back into the table. It is not possible
to say which record this will be. If you want to copy certain records, you have to clean up the table
before the conversion.
During a conversion, the data is copied back to the database table from the temporary table with the
ABAP statement MOVE-CORRESPONDING. Therefore only those type changes that can be executed
with MOVE-CORRESPONDING are allowed. All other type changes cause the conversion to be
terminated when the data is loaded back into the original table. In this case you have to recreate the old
state prior to conversion. Using database tools, you have to delete the table, rename the QCM table to
its old name, reconstruct the runtime object (in the database utility), set the table structure in the
Dictionary back to its old state and then activate the table.
If a conversion terminates, the lock entry for the table set in the first step is retained. The table can no
longer be edited with the maintenance tools of the ABAP Dictionary (Transaction SE11).
A terminated conversion can be analyzed with the database utility (Transaction SE14) and then
resumed. The database utility provides an analysis tool with which you can find the cause of the error
and the current state of all the tables involved in the conversion.
You can usually find the precise reason for termination in the object log. If the object log does not
provide any information about the cause of the error, you have to analyze the syslog or the short dumps.
If there is a terminated conversion, two options are displayed as pushbuttons in the database utility:
After correcting the error, you can resume the conversion where it terminated with the Continue
adjustment option.
There is also the Unlock table option. This option only deletes the existing lock entry for the table .
You should never choose Unlock table for a terminated conversion if the data only exists in the
temporary table, i.e. if the conversion terminated in steps 3 or 4. table for table TAB is therefore QCMTAB.
Hope this is helpful,Do reward.

How do I change the length of a column in the metadata?

A very simple package, reads data from SQL Server and FTPs it to a destination. I have zero experience with SSIS.
I had to add a new column (HEA_ID) to the input and output. The output record has a filler at the end (I hope you know what a filler is) and the new column has to go before the filler and the filler length reduced accordingly.
Problem: there is no apparent way to place the new column anywhere but after the Filler. The filler in the metadata is the wrong length and there is no way that I can see to change the length.
There is a yellow exclamation mark on the Flat File destination (where the filler is wrong length)
I get these erros when I run the updated package.
"The external metadata column is out of sync with the data source column. The column 'HEA_ID' needs to be updated in the external metadata column collection".
"The column filler needs to be updated in the external metadata column collection"
I have no idea how to fix these errors. Help needed.

Hi AllTheGoodNamesWereTaken,
According to your description, you add a new column HEA_ID and make some changes in filler column in the External Columns, so those two columns are out of sync with the data source column.
Please note that columns are created based on the data source columns. So we couldn’t directly change them in the Flat File Destination Advanced Editor.
To avoid this error message, just as Visakh said, just review mappings once again in the Flat File Destination. If we want to change the columns in the Flat File Destination, we need change the source columns.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to change the length of field in idoc segment

Dear all,
My requirement is to change the length of a field(Z field) in a segment (Z Segment). I tried the following but in vain
1)Tried to Cancel the release and then change the length of the domain. Unfortunately it is givin an error saying "Error while resetting release of segment ZC9DEMARA01".
I also tried cancelling hte release of extension and then cancelled the release of segment
2) Created a new version, but in new version the earlier fields are diabled. So I am unable to edit.
I have gone through some of the links available in SDN but I could not solve as I am unable to cancel the release in the first step.
[Idoc segment field length changes]
Could you please help me.
Thanks in advance!
regards,
Aravind

Hello Aravind,
I Have created one Segment type with some fields, changed the field length also its working.
just try to cancel the release and change the length of the filed and do it set release again.
Try it .
Thanks,
santhosh

Error when changing the length of IO

Similar Messages

Maybe you are looking for