Error when checking remodeling rule

I am trying to use remodeling to remove a characteristic (ZSORTDTL) from an infocube (ZLO_C01A). When I run a check on the remodeling rule it gives me the following errors:
Selection parameter is not a characterictic in InfoProvider "ZLO_C01A"
Inconsistencies were found when InfoCube ZLO_C01A was checked
Error while checking metadata
When I try to get more information on these messages they just give me message numbers: RSARCH162, R7I404, and RSCNV606, respectively. I can't find anywhere that refers to these messages. I get these errors in both our development and sandbox environment. I have created remodeling rules (even remodeling rules that delete characteristics) before and haven't run into this error. And, the cube is active and has this characteristic in a dimension table (ZLO_C01A5).
Any ideas on what is wrong here?

Poornima,
Follow this thread:
Error occurred during post handling RS_AFTER_IMPORT for UPDR L
Re: RS_UPDR_AFTER_IMPORT
Collect Objects seperatly for UR not bundled together.
~AK

Similar Messages

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error when activating update rules for R/3 training and event management

hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D Krishna

Hi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

Error when transpotring Update Rules

Dear colleagues.
When transporting an update Rules into our Quality enviroment the system pops up the following error:
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0.
I've verified the Update Rules on the Quality System and everything is correct but it remains inactive due to the transport fails.
I would appreciate your feedback.
Thanks in advance.

Dear khaja.
I send you the transport log as well as the Return Code.
Error when activating update rule 5MYASZMBOIQZSRR60674OBKJ3
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS error when generating InfoCube Update program
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0 (When generating the update program for data target ZWEPP_C02, InfoSource ZWE_BOM_RMX_IS, a syntax error occured in row 0. Message no. RSAU466)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Please, let me know if you need anything else.
Thanks.

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

Error when checking package - SMLT

Hi im trying to oimport new languanges into the system
currently it only have en, de,
i wan ti import addtional vi , zf, zh..
rscpinst is done, and profile parameter is updated.
Languange files are inside EPS/in folder, bot ecc languange and ehp4 languange pack
the problem is everytime i want to import, during searching the package it giving an error..
my ecc system is wan ecc6 then upgraded to ehp4 , have anyone can advise, where to look detailed error..the message is too generic
@0S@     Check Package Attributes
@38@     Package component: WEBCUIF 700
@01@     System component: WEBCUIF 700
@1B@     Error when checking package
Edited by: Muda Ikhsan on May 25, 2010 4:03 PM

Hi
For Language installation, please check SAP Note first specific to your language. Check for <language> install.
1. You must know code page of your language, install that code page by executing RSCPINST report. Many times this report end with an error. So check following tables for your code page
TCP0D This must contain your country code and empty language
TCPDB This must contain your code page in both fields
2. You are required to make changes in Instanse profile RZ10 for installed language, login language, check that sap note.
3. First Create a language using SMLT. after you create, you will find an import icon in front of defined language.
Click it, a new screen will appear,give the path as required and say import.keep on checking SMLT screen till the time it become green.
Regarding Language CD, You have to order for specific language you want to install, latin american languages comes with standard kit, check Language CD of your Installation kit.
PS.
Never install language without reading notes specific to it. First finish all prerequisite then go for SMLT import. Keep one seperate session open and do not close it till the time u sucessfully log in into system after Lang Import.
Cheers,
Chaith

Error when transporting transfer rules

Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
AND
Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
Thanks in advance.
Diego Lombardini

Hello Diego
Do you choose the correct Transfer Structure in DEV?
I mean the one that is assigned to EMP300.
Are you saying that your PROD have the following:
0customer_text_BA
And that your DEV only have the following:
0customer_text_BB
If the answer to the above questions is YES;
Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
Use it with caution and do not mass transport when you use this option.
Good luck
/FZA
Message was edited by: Fariborz Zangoui
Message was edited by: Fariborz Zangoui

Open error 1 - Operation not permitted' error when checking permissions

Hi
I just installed Snow Leopard on a clean HD, and when checking permissions I get these errors:
Repairing permissions for “Internal HD”
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.3/lib/python2.3/lib-dynlo ad/itertools.so
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/Extras/lib/python/PyObj C/CoreFoundation/_CFRunLoopObserver.so
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/imputil.p yo
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac/ Carbon/Appearance.pyc
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac/ lib-scriptpackages/StdSuites/_init_.pyo
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/test/test _inspect.pyc
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/PyObj C/AppKit/_appmain.so
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/dateu til/relativedelta.py
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/numpy /ma/mrecords.py
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/zope/ interface/adapter.pyc
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils /msvc9compiler.pyc
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/email/tes t/testemailrenamed.pyo
Open error 1: "Operation not permitted" on usr/sbin/stdhosts
Open error 1: "Operation not permitted" on Applications/Utilities/Boot Camp Assistant.app/Contents/Resources/fi.lproj/MainMenu.nib/keyedobjects.nib
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Open error 1: "Operation not permitted" on System/Library/Tcl/tcllib1.11/fileutil/multiop.tcl
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Is there anything to look out for here? What have I done wrong? Did I reformat my drive incorrectly? I chose Mac OS Extended (Journaled).
Tried also to fix permissions from the install disk but got the same errors.
Any help would be appreciated. Thanks

acquiesce wrote:
Hmm I haven't seen so many errors either.
the number of errors is not high at all. Leopard would very often produce at least 3 to 4 times as many.
It could have something to do with me running snow leopard on a Macbook Pro 2.16 core duo and not a core 2 duo... ?
no, that would not have anything to do with it. as i said, those are most likely just errors in the permissions database. as i said, leopard was notorious for those. snow leopard is not as bad but produces a number of them too. I just haven't seen this particular kind of messages before. reinstalling SL will fix them but it seems like a serious overkill in this case.

Error when opening business rules table in BPC 4.2

Hi,
I get the error "Unexpeted server error" when I try to open the business rules table in BPC 4.2 SP6.
I've tried the optimisation, processing the cubes and restarting the send governor services.
Rregards,
Mosa

HI,
Hope you had a goo festive season.
Yes, I'm still experiencing the problem. I can't even create a new table in eAdmin.
Is there another way to access the tables or is there a setting I need to modify in order to get this to work?
Regards,
Mosa

Error when activating transfer rules

Dear Experts,
I am getting the following errors when trying to activate my transfer structure. I am working on a system that has been just upgraded. So, any idea of what the problem could be?
Here is the error:
Mapping between data source 0FI_AR_3 and source system AMC_103 is inconsistent
Message no. RSAOLTP380
Thank you very much.

Hi venkat
Please check the OSS note 606437
Sriram

Gendata error when using MessageFromExtr rule on a field in one of the FAP

This is the error:
Error in RULLoadFASR(): Unable to locate Form Grouping identified by <;;;;>.
Tip: At least one Group (GRP) in the BDF needs to reference a Group1;Group2;Group3 value of <;;;;>.
There are also other errors. But this was the first.
While Gentran runs very fine, gendata gives errors. To say this happens only while using MessageFromExtr rule on a field in one of the FAP. The same BDF file works good when I use Move_it or some other rule.
The .FAP file looks like this for only the field maapings. Using Studio Version of Oracle Documaker Studio.
A,F8," ",N,N,N,N,;;,"MESSAGEFROMEXTR","ABCD","",;;,50,0,0,30,581,0,15,0\TBLOFF,XYZYX
Any Help??

The Key1 and Key2 table are already updated. This happens when using MessageFromExtr rule.
Also, in the extract file I am having some value in the tag "<J:L>TextMessage". As this rule supports <J:L> it should print teh text message on the field, but it gives error unable to retrieve record and other.

Error when checking email adress for imessage activation

Hi,
i am french so, first, sorry for the many mistakes i'm gonna do in english ^^
I have a problem with imessage and facetime activation on my Ipod touch 4G (IOS 6.1.1)
When taping my email adress and apple password there's no problem, i can access to the next step where it's asked to me to select an email adress where i'll receive my phone calls and messages, my account adress for apple is written bellow and selected by default. So i tap on next to finalize the opération, there's a "checking" of my email adress as it's written on the top of the screen, i wait 5 second and then i'm back to the previous step where my apple email and and password are asked.
Any ideas of what to do ?
I've already tried to reboot the itouch, restore it, reset the settings and i've already tried the time and date manipulation...

Have you tried:
If you get an error when trying to activate iMessage or FaceTime
FaceTime, Game Center, Messages: Troubleshooting sign in issues

Error when checking out file : http access -if http client-receive-1

Hi Everyone,
I get an error when I am trying to upload a file to Content Server or when I try and check it out.
The issue has been resolved by manually starting the service on an OS level.
What I would like to know is this:
In transaction SICF, there is a Content Server Interface service, which you can activate/deactivate. Would this have the same effect as manually starting the service on an OS level?
Please advise.
Thanks.
Freddie.

Hi,
When you are starting service in OS, you are actually starting the maxdb instance service .
You can set it in auto mode so that you will not get this error. The OS service only establishes the connection to SAP.
As a part of CS install, from CSADMIN part it is just required to send the certificate successfully to OAC0.
Normally no activity is required to be done to under SICF from CS install point of view.
Anirudh,

Error when checking remodeling rule

Similar Messages

Maybe you are looking for