Error when closing fiscal year 2010 for fixed assets

I was performing year end close for asset management using TCode AJAB and received an error that one asset has not completed posting depreciation for 2010.
When I looked at the asset that was causing the error I noticed there is still remaining "planned" depreciation for the year 2010. Apparently, there was some subsequent cost added to this asset after December 2010 depreciation was posted.
Can I process depreciation again for December for this one asset? If so, what Tcode would I use?

Hi
You have to execute repeat run in AFAB for DEC 2010 and then try to close using AJAB.
REgards
Malathi
Edited by: malathi_u01 on Feb 9, 2011 9:09 AM

Similar Messages

Accomodating Different Fiscal Year Variants in Fixed Assets.

Hello All,
Our client wants to maintain two separate and distinct fiscal year calendars for Fixed Assets:
1. One for Financial statements (Oct - Sep) and the other for
2 .Tax reporting and compliance purposes. (Jan - Dec)
How would you accommodate this requirement ?
Thanks.

Thanks Vijay,
But a different fiscal year version can only be used in Asset Accounting if the start and end dates of the versions in Asset Accounting and Financial Accounting are the same.
This is not the case with us.
Dep Area 01 for Company financials is 4-5-4.
Dep Area XX for Local Legal Req is Jan to Dec.
How do you accomodate this ?
Thanks.

FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54

Hi all,
I am using Former Budgeting and is configured for Commitment Budget only (not configured for Payment Budget). When I tried posting via GL Document Entry to test FM, I encountered the following error.
[Message no. FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54
Diagnosis:
Posting for the document of value type 54was attempted on a date that has not been opened in FM.
Procedure:
To define open item intervals for FM postings, use the following transactions:
Individual Maintenance of Open Time Intervals
Mass Maintenance of Open Time Intervals]
I have already maintained in transaction FMIR.
The entry is:-
Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
9B Commitment Budget/2010//00 All Account Assignment// / /16
What else do you think could be causing this error?
Regards,
Bernard

Go tcode FMIR.
Ensure that you both entries:-9A Payment Budget and 9B Commitment Budget.
Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
9A Payment Budget/2010//00 All Account Assignment// / /16
9B Commitment Budget/2010//00 All Account Assignment// / /16
Regards,
Bernard

Get error in AJRW - Fiscal Year change for Assets

Dear Expert!
I am facing with the following problem when run AJRW in Test Run mode.
Company Code: 1000
Fiscal year: 2010
Fiscal year change statistics - Test Version
Status    Company code    Read.....   Already changed.... To change.... Incorrect..... Without values..... Already deactivated....
(Those above column content is all blanked)
And in "Error log" button
Fiscal year change requested for the past (Message type error)
Problem class very important with log number 00000000000003117262
The current asset Fiscal year in OAAQ & OAAR is 2009, user already posted depreciation for 01/2011 & 02/2011. And they can't execute AJRW to close old fiscal year (FY 2010).
I am new in Asset Accounting Module. Any suggestions will be greatly appreciated with points.
Best regards.

Dear:
               Please try to run AJAB online in test mode and then in production run for 2010 and then run AJRW.
                Regards

When to Execute ABST2 program for Fixed Assets?

Hi,
Do we need to execute ABST2 program extractly at the end of the year 31/12/2008 or we can also execute after 31/12/2008?Because for my client-they have executed that program in July-2009.Now it is showing 0.01 differance for one of the depreciation account.the differance amount is showing for 2009 year.I am confused whether it is for 2008 or 2009.
Now in ABST2 program it is showing the 0.01 differance for 2009.Still can i ignore ABST2 error and can i proceed to close 2008 year for fixed assets? or it will give any error?
Kindlyl help me
Thanks
Suvarna

HI,
Generally it is executed before year-end closing. It picks up the asset balances and matches with the GL A/c balances. If any differences are found it shows the differences.
Run it and check in which year the difference popped up. Then verify balances for that particular year. If it started in 2008 you can check only 2008 balances and need not check for 2009.
Thanks,
Giridhar

Asset depreciation in a closed fiscal year

Hello,
After closing fiscal year 2010 we noticed that asset "A" start depreciation date was incorrectly set to December, 15.
Now we have corrected this date to December, 1. SAP have re-calculated the depreciation so we have aditional USD 600 planned for December. (we have UDS 600 posted + USD 600 planned).
Is there anyway to force those USD 600 to be posted on the new fiscal year 2011?
Is there any other way to arrange our depreciation issue withhoul opening 2010 for posting?
Thank you in beforehand.
Juanma.

Hi
I believe, OAYF is relevant for recalculating asset accum dep during Legacy data transfer.... I dont know if it would help in this case
If you have not done the FY 2010 closing, system wont allow you to close till the time all planned depreciations are posted...
Refer note 619969... You can run AFAB for Period 13 and post the dep in Period 12.... After that, do a balance carry forward
However, if you dont wanna post in 2010 any more, then dont change the Dep Start date.... Let it remain as Dec 15.... You can post Unplanned dep for Jan 2011 using ABAA - Followed by AFAB (Unplanned option)
Br, Ajay M

Posting in Asset Accounting in closed fiscal year

Hi
We are in the fiscal year 2009 and my client wants to open the closed fiscal year 2008 in both Asset accounting and Finance.
Point 1 : The requirement is they want to post some correction entries in April 2008 -Let me know what needs to be done in terms of depreciation posting etc to do a 2008 yearend again.
Point 2 : Any specific steps to do a full year end in 2008 now to balance Asset Accounting and Financial .And to carry forward balances as to where we are now in period 10.
Please advice.

Hi,
if you open 2008 and post, you have to process the full fiscal year end close procedure. AFAB, ASKB, the whole story.
You don´t have to worry about the carry forward, this will be done automatically by the system.
Regards,
Markus

Change fiscal year to 2006 in Asset Management : error in year-end closing

SAP version: 4.0B
Transaction Codes used: Year-end closing AJAB, Fiscal year change AJRW
We are trying to change the fiscal year to 2006 in Asset Management.
I tried to change the fiscal year to 2006 for the company code 0055 using transaction code AJRW. The test run has displayed an error message Fiscal year change in co. code 0055 1 possible only after year-end closing 2004 2.
I have used the transaction code OAAQ to find the out the fiscal year, the closing for depreciation area is successfully performed.
Unfortunately it is still showing 2003 which should have been 2004 for company code 0055.
I tried to close the fiscal year 2004. The test run has completed successfully. I have scheduled the RAJABS00. The program has executed successfully with no errors or warnings.
The closing for depreciation area (Transaction OAAQ) is still showing 2003 for company code 0055, which should have been changed to 2004.
I am new to Asset Management. Can you please give some suggestions on how to fix the problem and change the fiscal year to 2006.
Thank you,
Vidya

Hi,
Thank you very much for your prompt reply.
I have used transaction OAAR to check if any area is still open for previous years.
Surprisingly! The areas are closed only till 2003.
Can you please let me know what to do (transaction codes - programs) to close the areas for fiscal year 2004.
I am new to Asset Management. I think you are good in Asset Management. Can you please give some suggestions on how to close the fiscal year 2004.
Can you please let me know if I have to run any other transactions other than closing the areas before running the transaction to close the fiscal year 2004.
Thank you very much.
Sincerely,
Vidya

The error showing as Fiscal year change has not carried out for the coCd

Hi all,
I am facing a very critical situation. My client has the last closed fiscal year as 2006(from 2006 april to 2007 march).For the fiscal yr. 2007(2007april to 2008 march) they have already finalised and submitted the reports made from some parallel software.They now want to tally this report with SAP system and to adjust the SAP system entries as per this report.This work was running fine.But on 01.04.2009 none of the asset reports are running.The error it's throwing is as-
Fiscal year change not yet made for company code PWAL
Message no. AB059
Diagnosis
You have not yet carried out a fiscal year change for company code PWAL, although the current system date is in the new fiscal year.
Procedure
Carry out the fiscal year change for company code PWAL.
Proceed
The error is quite understandable.We have to close 2007 and then perform the fiscal year change.But the problem is that the adjustment for the year 2007 is not yet complete.Is it the only solution with me that I should close the yr.2007 and again open it after the fiscal yr. change? If that is done can I take care of the adjustment in the posted depreciation? Or is it possible that the system date can be made back to 31.03.2009(very stupid ask!). The real problem is that my client has mistakely created some assets in the year 2007(by AS91 after changing the take over date) those should have been shown in the next year and also some assets are creted in the year 2008 by the same strange method those should be shown in the year 2007.What I am doing now is deleting these legacy assets and creating the new assets in the correct year.And this process is not yet complete.If I close the year 2007, then the depreciation of these legacy assets will also be posted.Later how can I reverse the effect?Also without seeing the reports I can't make the adjustments.Please suggest/advice.
Debabrata

Hi Debabrata,
You have to do all fiscal year closing steps for 2007. When you reopen it you can do a repeat run for 2007. (You can do the reapeat run only for the new/ changed assets.)
Try first to test this in an actual test system (document it and do the same in production). Perhaps as you know when 2009 is open I want to close 2008 in one week. All changes they make in the asset system (change depreciation keys, recalulating,...) can result in postings in 2007 / 2008 what they don't want and later fiscal year problems. You will found a lot off masages about this on the form.

KP26 version 0 lock for fiscal year 2010

why i cannot update KP26 using version 0? but when i using version 1 its ok ?
now my fiscal year is 2010, and period 3.
the error shows - version 0 is block for fiscal year 2010. where i should check and change?

Hi,
check this link.
link:[Re: Activity type problem;
hope it'll give some idea.
Regards,
Sneha.

Asset still showing planned value for closed fiscal year.

*We have a situation:- After we ran depreciation for Dec 2009, there was a credit memo posting done in the system for a particular asset. Now, the fiscal year has been closed for 2009 and 2010 is opened. Jan and Feb depreciation posting has been done for the asset for year 2010, but the credit memo posting is still stuck as planned value in the 12th period of 2009. How can we take care of that? I canu2019t run unplanned depreciation for 2009. Is there a better way to take care of this? I thought about opening year 2009 for the asset (ccode) and then running unplanned depreciation. Will that be a problem? If yes, what other solution can be proposed.*
*Appreciate the response.*

Hi,
If it is not possible to open the fiscal year because audit
has already been completed we have a workaround which is not quite
correct from the legal side ist thereport RACORR20_A from note 29694.
If in table ANLC there are differences between posted and planed
depr. the report simply makes: planed = posted.
The correct way would be:
-> Reopen your GL for FY 2008 via OB52.
-> Recalculate values (RAAFAR00)
-> RAPOST2000
-> RAPERB2000
-> RAJABS00
Regards Bernhard

Changing Depreciation Key for Tax for closed fiscal years -

Hello,
Hoping someone can help me with this question - Is it possible to change the depreciation key for closed fiscal years - we need to change it for Tax - books. And if yes - does it mean we need to open closed fiscal years ??
Thank you,
Richa

Hi,
you will need to open the FI and AA periods. After changing the depreciation keys do the necessary dep run and close the books in the correct sequence.There should not be problem.

Year end closing for fixed asset

Hi,
Currently we run the process AJAB to close the year for fixed assets at the end of the year and can close two years back. So in September 07 I would have closed 2006, then run AJRW to open 2008.
So it is my understanding that we can only have two years open and we have in the past had the current year and one year back. Do you know why we do this, why dont we have the current year and one year forward?
There has been a request to close 2007 for fixed assets, if I do this, will this cause any problems?
With regards,
Sree

If u close the 2007 there is no problem, useally everbudy maintain one previous year and one current year, basic reason is if the any capitilization is to be made with back date u can able to do. If that is not there in your case u can close but if you open the future year after that you can not reset/reopen the 2007.
If you open 2009 also there is no use, because with future date no budy do the capitalisation.
advantage of opening of 2009 only one advantage is u can able to see the depreciation simulation will be taken period wise.
disadvantage of opening of 2009 you can't open 2007 if you post any entries with back date.
assign points if its helpful.

Depreciation Run for closed fiscal year

Hi All,
We bought some assets on 2005 through direct purchase and these assets are in under operation, but not having the asset master record in the SAP system.
Now we have decided to bring these assets into the system as the capitalised date is 10 Nov 2005 and for this purpose, we had created the asset master record and applied the t.code: ABNAN to post the values to these assets.
<b>"My concern is about how to provide the depreciation run to these assets for the closed fiscal year from 2005 to until Nov 2007.The present closed period in the production system is 2006".</b>
I request you to all kindly give your values on the above mentioned issue.
Thanks with regards,
Ran

Hi
Just give the dep start date as 10 Nov 2005 and run the dep for the current posting period the depreciation will get posted for the year 2005 and upto the current period,in the current posting period.
As the past reriods are all closed you cannot post dep in the year 2005.
You will have the whole dep for that particular asset posted in the current posting period.
Hope this helps
Good Luck
Hari

Transfer on last day allowed only in closed fiscal year

Hi Guru,
Client kept asset transfer date as 31/10/2010 first, uploaded some asset on this date, due to some reason asset uploading was not completed for all the asset. so all the asset value which was uploaded on 31/10/2010 was done as zero.
Client took decision to upload all the asset on last day of FY 10-11 i.e 31-03-2011. transfer date was changed as 31-03.2011 and moved up to quality, unfortunatly rquest was not moved to PRD and while uploading to PRD again 25 asset got uploade by transfer date as 31/10/2010, when realized transport req of change transfer date is moved to PRD and abt 50000 asset of total 70000 asset got uploaded.F.Y 2010 was closed while uploading this assets
Year 2010 was again open for posting of cj88 transaction.
When we are uploading balance assets in the system getting error message Transfer on last day allowed only in closed fiscal year
When tried to close FY 2010, system is giving message ' Depreciation not posted completly' for 25 assets.
i tried to do value as zero for these asset through as92 but system agiain giving message Transfer on last day allowed only in closed fiscal year
so situation is we are not able to close FY 2010 and thus assets are not getting uploaded. if we run depreciation for said 25 assets for year 2010 it is not proper because actual transfer date is 31.03.2011
Please Help
Regards,
Shekhar

hi,
go to customizing and under asset data transfer - parameters for data transfer - date specifications - specify transfer date/last closed FY--- you need to place the last day of the period where you have last run depreciation for the legacy system and make sure that I am assuming at this stage will be the previous period or this period.
rgds,
jay

Error when closing fiscal year 2010 for fixed assets

Similar Messages

Maybe you are looking for