Error when Compare Size of P-, Q- with X- and Y- Tables in RSRV

Hi Expert,
I am using RSRV and trying to compare the content of P table to X table. But it seems that the X table was deleted while comparing it to P. And while doing it, I experience a "runtime error". Can I recover the X table and how?
Janet

Hi,
Activate the Infoobject Manually once more by making minor Change in BUsiness Explorer Tab and see whether it creates the Table .
Then u can revert the change back and activate once more .
And then Analyse it in RSRV .
Regards,
Vijay.

Similar Messages

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

Error when generating transport dataset (transfering queries with RSAQR3TR)

Hi!
I try to transfer queries from one system to other.
Systems are not connected with each other, so no transports are available.
I am doing like this:
- running program RSAQR3TR in "old" system
- downloading a query as TXT file into my PC
- running program RSAQR3TR in "new" system
- uploading TXT file into "new" system and get a message - "Error when generating transport dataset"
I have only query and user group in "old" system. Is this information enough to transfer them to "new" system?
<b><REMOVED BY MODERATOR></b>
Mindaugas
Message was edited by:
Alvaro Tejada Galindo

Hi,
Step 1. Run RSAQR3TR in 'old' system. Select EXPORT and specify the objects to be transported.
(System includes these in an automatically created transport request)
Step 2. Release this transport and request it be transported to 'new' system.
(This results in the entries being populated in transport table AQTDB in 'new' system).
Step 3. Run RSAQR3TR in 'new' system. Select IMPORT and tick the Overwrite checkbox. Specify the transport number in the field labelled 'dataset with imports'.
(RSAQR3TR gives the message that stuff has been imported OK).
Step 4. if you still couldn't find the queries, so ran RSAQR3TR one more time, this time specifying 'Copy Standard Area -> Global Area'
Regards
Sudheer

Error when tryying to burn ny dvd with Encore

I am getting a error when tryying to burn ny dvd with Encore
PCG "baseball_and_more" has an error at 00;00;00.
Internal software error:0% line basball_and_more -PGC Info name == baseball_and_more ref == Bpgc, time 00;00;00
Anyone know what this is due to?
If I add another clip before the base_ball_and_more then I get the same erro but at 16:45:0I 4
This seems related to changing the M/N field in the adobe media encoder. If I use defaults while encoding in premier
I dont get them error in Encore. But if I change the defaults ( hope fully to get better DVD results) I get the error.

First, back on the main page http://forums.adobe.com/community/encore enter
pcg
into the SMALL forum search window on the right and read previous discussions
Second, try exporting from Premiere as DV AVI type 2 and give that to Encore... use the Automatic encoding setting and let Encore make the decision on what will best fit on a DVD

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

How to resolve unresolved column error when we change column name in BMM Layer and removed alias in presentation layer

how to resolve unresolved column error when we change column name in BMM Layer and removed alias in presentation layer

Looks like the presentation column got Alias before your BMM changes, so in your case renaming logical column and deleting alias is not good to go.
Keep Alias

Operation with Hashed and Sorted Tables

Hi,
What are all the internal table operations are possible with sorted and Hashed table.
Kindly let me know,

Refer this help in case you have not done already.
http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/frameset.htm
Regards,
Ravi Kanth

Error when trying to create a worksheet with 4 columns

Dear All,
I was trying to create a worksheet in tabluar formate base on a table (folder) that has 3 columns (items) .. the worksheet was created successfully .. but when saved it , then closed and tried to reopen it i got the following error
ORA-03120: two-task conversion routine: integer overflow
when i tried to add the columns one by one to the sheet .. it worked till 3 columns .. when i tried to add the fourth one i got that error agian ...
I changed the combinations of the columns ... to make sure that there's no problem in the formate of one of them ..
it worked with any combination of 3 columns
can you help me to solve this problem
best of regards,
Shaimaa

Cryptic message!
I saw a definition online for this that said:
Cause: An integer value in an internal Oracle structure overflowed when being sent or received over a heterogeneous connection. This can happen when an invalid buffer length or too great a row count is specified. It usually indicates a bug in the user application.
Action: Check parameters to Oracle calls. If the problem recurs, reduce all integer parameters, column values not included, to less than 32767.
Which seems even more cryptic.
Then checking on another forum with this error, I saw:
Q. I am getting the above error trying to run a free hand SQL report on two tables that are materialised views (database links) on our reporting database from our production database. Now the bizarre thing with this is that the report does not work on my computer or our production server, however one of my team mates can run the report.
Can anybody explain why this error might occur? I am able to run free hand SQL on any other table. The Oracle error talks about a CLOB, but if that were the case, why would it work on a different machine?
A1. Check if you have the same version Oracle client on the three machines. What happens if you run the query through a different tool like TOAD or SQL*Plus ?
Final A. The problem was due to the different versions of Oracle Client. I was running 9.2 on my PC, I had 9.2 on the server and it wouldn't work. My collegues were running 9.0.1 and had no issues, once I changed back to this version on both my PC and the Server, the problem was gone.
I think the problem was something to do with BO 6.5.1 as the report was developed in 6.1.a and worked fine, as soon as we upgraded the porblem occured.
If you are not using CLOB's, I would suggest going down the track of checking your Oracle ver.
So, with all that info, I'd check:
1. are you using Disco Desktop and getting this?
2. Materialized views?
3. Links to another database in your folder?
4. Do you have a different Oracle client that others? Can others run the same report and all okay?
5. Can you run the same query in TOAD, SQL*Nav, SQL*Dev, etc?
Russ

Error when displaying a field on Screen with Table Control

Hi,
It is going to 'Dump' when I am trying to display data on the screen with the help of Table Control. From the dump, What I have observed is , there is a field 'ZTSV_FSRDATA-ANZFEHLER'. If this field has negative value, then it is going to 'Dump' saying that the length is not enough. If it has a positive value then it is working fine. But the type of the field in the Internal table & on the screen are same.
Please help me to resolve this error.
I am posting here the Dump message also:
A conversion error occurred while the program was trying todisplay data on the screen.
The ABAP output field and the screen field may not have the same format.
Some field types require more characters on the screen thanin the ABAP program. For example, a date field on a screen needstwo characters more than it would in the program. When attempting to display the date on the screen, an error will occur that triggers the error message.
Thanks,
Sreenivas Reddy Maddi.

Hi Sreenivas,
Refer this thread:
how to display negative values in a screen field of a screen
Re: negative values not allowed
Regards,
Sampath

Error when use Crystal report Bundled Version with Vs2003 on Windows Vista

Post Author: MartinoLuccarelli
CA Forum: .NET
Hi, I have developed a software with Vs2003 that uses Crystal report Bundled Version. I have created a Installation package that include the merge modules, and i have entered the Licence Key for Crystal_regWiz2003 module. If i install and use the software in the computer with XP or Windows 2000 I do not have problems. But when i install the software on the PC with Windows Vista i have this error when the probram show a report "Operazine di Crystal Report non Riuscita perche' non e' stato possibile ottenere una licenza gratuita nel tempo allocato" Thank's

Uninstall CRVS2010 that you currently have installed.
To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325 - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
Reinstall CRVS2010 SP1 from here:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
- Ludek

Error when Compare Size of P-, Q- with X- and Y- Tables in RSRV

Similar Messages

Maybe you are looking for