Error when compile linux-selinux
I got this issue when compiling linux-selinux 3.4.5-1:
mkdir: cannot create directory /tmp/yaourt-tmp-user/aur-linux-selinux/pkg/linux-selinux/usr: File exists
==> ERROR: A failure occurred in package_linux_selinux().
Aborting...
==>ERROR: Makepkg was unable to build linux-selinux
==>Restart....
any suggestion?
Hm maybe you should delete this directory?? Seems like you have tried to build it before and the build was aborted, leaving the directory. Just clean your /tmp (easiest way: reboot) and try to build it again and check if you get the same or different error messages.
Similar Messages
-
Pragma error when compiling with SDK X
Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
MagdaWithout seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378 -
Method not found in class errors when compiling project
Hi,
I am getting the following errors when compiling my project:
Error(3,8): ReqLinesNotificationsVORowImpl not found
Error(25,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(31,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(37,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(43,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(49,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(55,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(61,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(79,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(85,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(91,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(97,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(103,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(109,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(115,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(121,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(127,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(133,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(139,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(145,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(151,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(157,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(163,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(169,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(175,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(181,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(187,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(193,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(199,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImplError(205,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
I have ReqLinesNotificationsVORowImpl and ReqLinesNotificationsVOImpl files in myprojects directory. Can anyone help please?
ThanksHi,
From the error it seems that the code is refering ReqLinesNotificationsVOExRowImpl file.
Please make sure that its class file is present in myclasses folder.
Since u have mentioned that ReqLinesNotificationsVORowImpl is already placed in myclasses folder. Hope this should resolve your issue.
Regards,
Raj Papdeja -
Errors when compiling the web service (SAP Web Service Design Tool)
After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PMHello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip] -
Error when compiling invalid object XLA_00555_AAD_C_011117_PKG
Hello folks,
i am getting error when compiling the following object.
XLA_00555_AAD_C_011117_PKG
here i have mentioned below is what i have done for that invalid object.
SQL> select owner,object_name,object_type
2 from dba_objects
3 where status='INVALID';
OWNER
OBJECT_NAME
OBJECT_TYPE
APPS
XLA_00555_AAD_C_011117_PKG
PACKAGE BODY
SQL> connect apps/apps
Connected.
SQL> alter package XLA_00555_AAD_C_011117_PKG compile body;
Warning: Package Body altered with compilation errors.
SQL> show errors;
Errors for PACKAGE BODY XLA_00555_AAD_C_011117_PKG:
LINE/COL ERROR
32209/1 PLS-00103: Encountered the symbol "NVL" when expecting one of the
following:
* & - + / at mod remainder rem then <an exponent (**)> and or
|| multiset
The symbol "*" was substituted for "NVL" to continue.
32209/23 PLS-00103: Encountered the symbol "=" when expecting one of the
following:
. ( * % & - + / at mod remainder rem then <an exponent (**)>
and or ||
The symbol "* was inserted before "=" to continue.
LINE/COL ERROR
Please Provide me solution as soon as possible
Regards,
FarookNot exactly a custom object.
XLA%AAD%PKG packages will be built dynamically by the XLA's AAD compiler. This will be used while generating the accounting entries.
This error may occur due to two reasons:
a) missing source, which is used in the setup
SELECT *
FROM xla_conditions xc
WHERE application_id = &appl_id
AND xc.source_code IS NOT NULL
AND NOT EXISTS (SELECT 1
FROM xla_sources_b xsb
WHERE xc.source_application_id = xsb.application_id
AND xc.source_type_code = xsb.source_type_code
AND xc.source_code = xsb.source_code);
b) wrong conditions in setup
SELECT application_id,amb_context_code,entity_code,event_class_code
,accounting_line_type_code,accounting_line_code
,segment_rule_detail_id,description_prio_id
FROM xla_conditions xc
WHERE application_id = &appl_id
GROUP BY application_id,amb_context_code,entity_code,event_class_code
,accounting_line_type_code,accounting_line_code
,segment_rule_detail_id,description_prio_id
HAVING COUNT(*) > 1
AND SUM(NVL2(source_code,1,0)) <> SUM(NVL2(logical_operator_code,1,0)) + 1;
For (a) check any patch available for the missing source. Otherwise contact Oracle Support.
For (b) check the condition of the JLT / JED / ADR, whether anything is wrongly entered.
By
Vamsi -
.class expected error when compiling
Ive been getting this frustrating error when compiling. My program is essentially supposed to add the values in two matrixes and return a new matrix using the added values
Heres my code:
public Matrix add(Matrix comp)
int[][] temp = new int[this.numRows()][this.numCols()];
for (int a = 0; a < comp.numRows(); a++) {
for (int b = 0; b < comp.numCols(); b++) {
temp[a] = this.myCells[a][b] + comp.getVal(a, b);
Matrix addedMatrix = new Matrix(temp[][]);
return addedMatrix;
heres the constructor for Matrix object:
public Matrix(int[][] mat)
int[][] myCells = new int[mat.length][mat[0].length];
for (int i = 0; i < mat.length; i++) {
for (int j = 0; j < mat[0].length; j++) {
myCells[i][j] = mat[i][j];
}getVal, numRows, and numCols are all helper methods that just return values.
The error is '.class' expected in the line which says Matrix addedMatrix = new Matrix(temp[][]); I checked for extra brackets but there dont seem to be any.
Any help would be appreciated. Thanks.I think you just needMatrix addedMatrix = new Matrix(temp);
-
I'm trying to use the HDL interface node in LV8 FPGA with a PCI-5640R and had the "timing constraint" error when compiling my VI, however, the same VI was successfully compiled on a CRIO-9104, it seems the FPGA on PCI-5640R is not good as the one on CRIO-9104, or I'm not using it right. could you please kindly help me out?
I tested it with the sample code downloaded from NI website
( http://zone.ni.com/devzone/conceptd.nsf/webmain/456722DDDE17986A86256E7B0065EE6F ) which demonstrates using an IP core for a filter. To simplify it, I only keep the HDL Interface Node and the While Loop (see "UsingFilterCore.vi" in attached zip file), and then I created 2 projects including this VI (1 for CRIO-9104, in sub folder "CRIO-9104", the other for PCI-5640R, in sub folder "IFRIO 5640"). When opening the 2 projects separately in LV8.0 and selecting the VI for compile, the one for 9104 passed and the other failed. Here I attach the source code, error message screenshot and the NIReport from MAX, hope you can reduplicate the problem.
Can you help me out? Thanks very much !
Message Edited by Jerry_L on 03-26-2006 09:28 PM
Message Edited by Jerry_L on 03-26-2006 09:29 PMHi Jerry,
I'm just tried to make all these steps by myself (http://zone.ni.com/devzone/cda/tut/p/id/3516). I have generated FIR filter using Xilinx ISE and got *.VHD file which was going to use in HDL Node.
In the Parameters tab of the HDL Interface Node configuration dialog, double-click in the Names column to add parameters. Create parameters as shown below.
Next, switch to the Code tab. Notice that your parameters now appear in the entity section. To complete the next two sections of code, you will need to refer to the filt.vhd file that you generated earlier and interface the filter core to the LabVIEW FPGA execution system.
1. The first problem I met was integrating VHDL code from earlier generated *.VHD file to CODE tab in properties of HDL Node. Content of entity section in *.VHD is not the same that in your attached file. Please check it in attached files. I'm sure this is the main reasen of problem.
Next, switch to the External Files tab. Click the Add File button and select the filt.edn file that you created earlier. This is the EDIF netlist file that you generated earlier.
2. I have no idea where can I get it and when during filter generation using Xilinx ISE it was generated too. How can I get it? I had to use your attached file filt.edn.
3. After that I have made the same schematics like you have in your VI FPGA and try to run. But I've got two error messages:
HDL Interfave node: enable chain not handled. Details: Refer to the documentation for the correct assignments for the enable_out output from your HDL code.
HDL Interfave node: output not handled. Details: Right-click the node, select Configure to open the Configure HDL Interface Node dialog box, and use the Code tab to handle all output parameters.
Actually I need to model FIR filter:
Bandwidth 200-600 Hz
Sampling 8 KHz
Attenuation 80 dB
That's why I tried to follow all these steps by myself to understand how does it work.
Thanks a lot.
Nikita
Attachments:
Filter1.vi 16 KB -
Assertion error when compiling ANSI C code - Forte 6.2
I have a compilation error when compiling on my Ultra 10
using Forte 6.2 C compiler (5.3). Here's the line:
teds@enigma[195]% cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil !!
cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil -xO4 -DCMO_DEBUG_DETAIL -DUSE_DATACONN -c cmoisubs.c -o cmoisubs.o
cg: assertion failed in file ../src/ms_pipe/sp_interface.cc at line 689
cg: Internal error: constval annotation set on reg with multiple defs
cg: 1 errors
cc: cg failed for cmoisubs.c
teds@enigma[196]%
Does anyone have any ideas?
Thanks,
TedAre both files in the same directory? Is the directory in your classpath?
-
ERROR:HDLParsers:3370 Compile Error when compiling for NI-5640R
I'm trying to get a FFT Core working inside the NI-5640R FPGA. In my latest debugging step, I have received the following error when compiling:
Compiling vhdl file "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" in Library work.
Entity <bushold> compiled.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 142. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkMaxWidth.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 143. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkCounterWidth.
Has anybody seen this before? I am including my FPGA VI that is causing this error (FFT (FPGA).vi). I am also including my previous step in debugging the FFT that worked (FFTworking (FPGA).vi).
Attachments:
FFT (FPGA).vi 125 KB
FFTworking (FPGA).vi 119 KBHi,
The main cause of this error message is the large array size. You configured a 16-bit fixed-size array with 4096 element for a total array size of 65536 (16 * 4096). Array uses a lot of FPGA resource and the general recommendation to limit the use and size of array as much as possible on the FPGA VI. This VI will certainly overmap the FPGA resource because of the large array size.
Although this error message is not directly related to the array size, it has however been reported to R&D (#4G3COBJ0) for further investigation. A possible workaround would be to reduce the size of the array or use DMA FIFO to pass the data to the host.
Thanks for the feedback!
Tunde A.
LabVIEW FPGA -
Revision: 10641
Author: [email protected]
Date: 2009-09-28 08:44:38 -0700 (Mon, 28 Sep 2009)
Log Message:
Fix ambiguous reference error when compiling a performance test.
Fully qualify mx.events.Requests in generated code for FlexInit.
QE notes: None.
Doc notes: None.
Bugs:
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no.
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.javaStart by validating your HTML code. You have numerous code validation errors on line 230 caused by UPPER case tags. XHTML doc types, need lower case tags. After you fix your code errors, republish your page.
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
HTML & CSS Tutorials - http://w3schools.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
Database link error when compiling forms 6.0 and forms 6i.
Dear sirs,
We have a database link between two databases of the same version oracle 8.0.5.
Recently we have upgraded one of our databases to version 9.2.0.1 (the database where the database link was originally created ) and now we are having problems when compiling forms that have PL/SQL blocks using the database link.
The error message received when compiling the form is the following:
ORA-02068: Following severe error from dbproduc.world
ORA-00600: Internal error code, arguments: [No conversion op],[],[],[],[],[],[],[]
The forms did not present this error before, it began when we made the upgrade.
Is this a FORMS 6.0 problem ?
Is this an ORACLE 8.0.5 problem ?
Is this an ORACLE 9.2.0.1 problem ?
Can you please give me some advice to solve this problem ?
Thanks in advanceAs I see, when you use a non-oracle database the tables don`t appear, you must create the realation with the table manually, on the properties
-
Bug report: ube_ipa: internal error when compiling with -xO5
When compiling imlib2-1.1.2, one source file causes compilation to fail with the following error message:
ube_ipa: internal error
cc: ube_ipa failed for loader_tiff.c
The command which fails is (probably wrapped):
cc -DHAVE_CONFIG_H -I. -I. -I.. -I. -I.. -I../src -I../loaders -I../libltdl -I/usr/X11R6/include -I/usr/openwin/include -I/opt/csw/include -I/opt/csw/include -I/opt/csw/include -g -fast -xarch=386 -xstrconst -v -xildoff -xO5 -c loader_tiff.c -KPIC -DPIC -o .libs/loader_tiff.o
Changing -xO5 to -xO4 works around the problem. The source file in question is imlib2-1.1.2/loaders/loader_tiff.c
Patch 112756-10 has been applied, and doesn't correct the problem. GCC doesn't have any problem compiling the file.
A quick note to any Sun employees reading this: it took me 45 minutes to find somewhere to submit this bug report. Searching sun.com for "submit bug report" turned up many forum postings where people asked "Where do I submit bug reports?", a bug report form for Sun One Java Studio, and not much else. It might be in your interest to make submitting bugs easier.Internal errors, such as the one you encountered, are generally considered compiler bugs. They indicate that the compiler reached an unexpected state and therefore bailed out. I opened bug 20703141: internal error: pic_relocs(): hh reltype? to investigate. I see the same error message emitted by the current Studio development release; I will update this thread if I find a work-around.
Thanks,
Mark -
Cc got assertion error, when compiling emacs-23.3
I got an assertion error with cc as follows, when compiling emacs-23.3.
It compiles fine without the "-O" option.
I can provide a CPP processed file which reproduces it.
;; I could not find a place to report bugs, and I put it here.
;; Sorry if it is not an appropriate place.
% cc -V
cc: Sun C 5.12 SunOS_i386 2011/11/16
% cc -c -Demacs -DHAVE_CONFIG_H -I. -I/work/emacs/emacs-23.3/src -I/usr/dt/include -g -O font.c
"font.c", line 185: warning: integer overflow detected: op "<<"
"font.c", line 197: warning: integer overflow detected: op "<<"
"font.c", line 215: warning: integer overflow detected: op "<<"
"font.c", line 2995: warning: integer overflow detected: op "<<"
"font.c", line 3422: warning: integer overflow detected: op "<<"
"font.c", line 3920: warning: assignment type mismatch:
pointer to char "=" pointer to unsigned char
"font.c", line 3945: warning: assignment type mismatch:
pointer to char "=" pointer to unsigned char
"font.c", line 4026: warning: integer overflow detected: op "<<"
assertion failed in function pg_first_pass_do_block_rec() @ post_gen.c:3758
assert(blk_sp_offset_(nextb) == (current_offset + get_prologue_size() + BITS2BYTES(be_cur_local_size)))
cc: ube failed for font.cGot it ...
Reduced testcase:
% cat c.c
enum Lisp_Type
Lisp_Int0 = 0,
Lisp_Float = 7,
struct Lisp_Float
union
double data;
struct Lisp_Float *chain;
} u;
struct Lisp_Vector
unsigned int size;
struct Lisp_Vector *next;
int contents[1];
int
font_unparse_xlfd (font, pixel_size, name, nbytes)
int font;
int pixel_size;
char *name;
int nbytes;
char *f[21];
int val;
int i, j, len = 0;
val = ( ( struct Lisp_Vector * ) ( ( unsigned int ) ( ( ( font ) ) & ( ( ( ( int ) 1 ) << ( 32 - 3 ) ) - 1 ) ) ) ) -> contents [ 5 ];
if ( ( ( ( enum Lisp_Type ) ( ( ( unsigned int ) ( ( val ) ) ) >> ( 32 - 3 ) ) ) == Lisp_Float ))
i = ( ( ( void ) 0 , ( struct Lisp_Float * ) ( ( unsigned int ) ( ( val ) & ( ( ( ( int ) 1 ) << ( 32 - 3 ) ) - 1 ) ) ) ) -> u . data + 0 ) * 10;
f[2] = __builtin_alloca ( 12 );
else
f[2] = "*-*", len += 4;
% cc -g -O c.c -V
cc: Sun C 5.12 SunOS_i386 2011/11/16
acomp: Sun C 5.12 SunOS_i386 2011/11/16
"c.c", line 41: warning: implicit function declaration: __builtin_alloca
"c.c", line 41: warning: improper pointer/integer combination: op "="
iropt: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
ir2hf: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
ube: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
assertion failed in function pg_first_pass_do_block_rec() @ post_gen.c:3758
assert(blk_sp_offset_(nextb) == (current_offset + get_prologue_size() + BITS2BYTES(be_cur_local_size)))
cc: ube failed for c.c
Bug 7167252 filed. If we find a work-around I'll post it. -
Error when compiling in debug mode
I receive an error when i try to ORA-04021 timeout occurred while waiting to lock object stringstringstringstringstring
Cause: While waiting to lock a library object, a timeout is occurred.
Action: Retry the operation later.I receive an error when i try to compile a package :
ORA-04021 timeout occurred while waiting to lock object stringstringstringstringstring
....thanks for your help -
Error when compiling, no error info
I use RH X5 and have encountered compilation problems...
When I click "Generate Primary layout" the output windows
stops during "Removing broken jumps..." and the window title
changes to "Result: Failed to generate WinHelp". No further help.
When I try fooling RH by clicking "View Primary Layout" I'm
told there's no Primary Layout but do I want to generate it? I
click OK and after a while RH tells me "The WinHelp Wizard
encountered an unexpected error when attempting to generate
WinHelp"...
. No further help.
I use RH just a few times a year so I'm a real novice at
this, which doesn't help in a situation like this
So, does anyone out there have any kind of advice (short of
quitting my job) to what I should do??? Pretty please!!! (To add
insult to injury, I have people breathing down my neck wondering
why the Help file isn't ready yet...)Hi Brian, Brian et al,
Sorry for the delay - I was hit by a bug when I wasn't
looking, so I spent the last week in bed feeling sorry for myself
First things first: Brian (bawd), the Swedish word "skit"
sounds like "sheet", but with a slightly thicker "sh". Its meaning
should be fairly clear...
If you're interested in a literal translation of my
harangue it's "damned, satanic ****** software". (Anyone feeling
offended should probably switch to another topic now, to be
safe...) Us Swedes usually invoke the netherworld and its denizens
when we feel the need to vent steam ;)
Brian Mc: I'll give you a bit of background for this
particular Help project - you're right, the beginning is usually a
good place to start at...
This project contains a lot of text and bitmap files (showing
dialogs, message boxes etc), which are created with Alt+PrtScr and
copied into a Word doc. I created it 4-5 years ago using RH X3 and
imported a Word2000 doc containing all text & pictures. I
honestly don't remember if I copy-pasted (Ctrl+C Ctrl+V) all text
& pictures into the RH Word doc, or used the imported doc.
Anyway, I had no problems creating a Help file back then, and
subsequent updates also worked without compiler problems.
Last year I got a new laptop, which included Office 2003,
which also meant I had to upgrade to RH X5. I've since upgraded and
updated two other projects without running into any particular
problems, but then came the current baby with a lot of updated text
& bitmap files... What I did was:
- opened the old X3 files in X5 (no problems)
- copy-pasted new/updated text from a separate Word doc into
the RH Word doc
- copy-pasted new/updated bitmap files, same as the text
Everything went well until I wanted to generate the new
WinHelp2000 file... After countless futile attempts and A LOT of
swearing I started looking for help in Cyperspace and found this
eminent forum
I really, really hope one of you great people can come up
with something to help me out and thank you for your attention so
far.
Best
Gunilla
Maybe you are looking for
-
Getting access to task manager info
I'm trying to find out how I can tell if a particular exe is running on a native environment. Ideally get access to the sort of info you find in the Windows task manager. Basically I'm trying to stop a java application from running if something like
-
I have an iPod Nano 4GB that was formatted for Windows a couple of years ago. Shortly afterwards I bought and iMac and would like to like to be able to sync my iPod with the iMac. Most songs were loaded from CDs. However, a few were purchased from iT
-
Hi All, We are reading the reports output through after report trigger and spooling the data into a excel file using OLE2 package. When we are spooling the excel data containing Arabic language literals few of the literals are not coming correctly an
-
Rollover Area appeared on all slides
While editing a project in Captivate 5.5 I realized that at some point I've done something to make a Rollover area appear on all slides. During editing I saved the file with a new name in case I needed to go back to the original. When I check the old
-
DatagramSocket's MessageReceived event with MF MediaSource strategies?
I'm trying to integrate sending and receiving data over UDP sockets using Media Foundation. I've already got my MF MediaSink setup to send data out over a UDP socket. However, I can't figure out how to get an MF MediaSource to receive data. I'm us