Error when compiling code for crio 9068 using LV 2014 SP1

I have a project that was mostly developed in LV 2013 SP1. I recently upgraded to LV 2014 SP1, and I can no longer compile the FPGA VI. At first, I received an error stating that the Xilinx Vivado 2013.4 compilation tool was not installed. I found this tool on your site, downloaded it, and installed it on my computer. When I try to compile now, the compilation advances to a certain point, seems to hang there for a while, and then returns an error stating that toplevel_gen_propImpl.xds cannot be accessed "because it is being used by another process." I have repeated this exact same scenario on both by desktop and my laptop. I've attached a PDF of the error I windows I have received.
Attachments:
compile_error.pdf ‏114 KB

Hi scg,
I took a look at your file and researched a little bit about your issue, I have not been so lucky with the research since most of the doceuments are related to previous versions of the software, nevertheless it is also what makes me think that the file might be corrupted or some issue related to it so and I have found some tests that you could try:
1. Create a new FPGA file with your code on it and compile it again.
2. Turn off the firewall and compile again
3. Restart the compiler Services
Hope you might find this information helpful!
Regards,
S.Jimenez

Similar Messages

Typedef Error when compiling niScope for DLL using CVI

I am getting the following error when trying to compile a DLL for the NI 5122 digitizer using CVI:
Error creating type library:
All structs, unions, and enums required by exported functions must be typedefs in order to create a type library. The struct/union/enum "niScope_wfmInfo" does not use such a typedef.
I have created a variable and "typedefed" it as niScope_wfmInfo to try and get rid of this error. This did not work. I have tried making several other changes. Some have eliminated the error but created problems with the DLL.
Has anyone had a similar error to this? If so, how did you get around it?
Thanks,
Heather

Hi Heather,
The reason that you are receiving this error is because the niscope.h file (called by niScope.fp) uses a struct which cannot be compiled into a DLL. This means that the niScope.fp file cannot be included in the target settings. Here's a knowledgebase that describes the error.
http://digital.ni.com/public.nsf/websearch/AC028D9586E947F08625661E006A182F?OpenDocument
If you do want the niScope.fp file to be included then you will need to make some modifications to the niscope.h file and create a typedef for the niScope_wfmInfo struct. Here's info from the help file that describes the type library section and the use of the .fp file.
"Type Library—This button lets you choose whether to add a type library resource to your DLL. Also, you can choose to include links in the type library resource to a Windows help file. LabWindows/CVI generates the type library resource from a function panel (.fp) file. You must specify the name of the .fp file. You can generate a Windows help file from the .fp file by using the Generate Windows Help command in the Options menu of the Function Tree Editor window.
This feature is useful if you intend for your DLL to be used from Visual Basic."
If you do not include the niScope.fp file then you will be able to compile the DLL.
Hope this helps! Let me know if you have any questions.
Erick

Compiling code for LPC2378 Target using LV Embedded

Hi
I am using LabVIEW embedded for ARM 10 and using MCB2370 evaluation board. I did my evaluation successfully but now when I tried to compile the same code for an lpc2378 target (tier 2), I am getting "Error: Application is too large for target memory. Status: Build failed."
I am only doing serial communication using com 0 and using no other peripherals that are custumized for MCB2300 target.
what should I do to resolve this issue?
thanks and regards!
Mani

Hi scg,
I took a look at your file and researched a little bit about your issue, I have not been so lucky with the research since most of the doceuments are related to previous versions of the software, nevertheless it is also what makes me think that the file might be corrupted or some issue related to it so and I have found some tests that you could try:
1. Create a new FPGA file with your code on it and compile it again.
2. Turn off the firewall and compile again
3. Restart the compiler Services
Hope you might find this information helpful!
Regards,
S.Jimenez

Error when compiling AppleScript for CS2, need help

I've recently started learning AppleScript, and while I'm no stranger to programming I'm a little lost when it comes to errors like this one. I have both InDesign CS2 and InDesign CS3 installed so I'm not sure if my problem is caused by that, they were installed before I started working on this mac. I've also been recently upgraded from Tiger to Leopard, in case that might be a probable cause.
Basically, my problem stems from this:
tell application "Adobe InDesign CS2"
    get active document
end tell
When I try to compile this I get a Syntax Error that says "Expected end of line but found class name." and highlights "document". I've also had problems trying to use things like "page 1" or "view preferences" with similar errors. With the case of things like "page 1" I've had to replace it with "item 1 of pages" to get it to compile.
If I change it to "Adobe InDesign CS3" it works fine, but I need to compile for CS2 for backwards compatability. Strangely, this method works:
set indesign to application "Adobe InDesign CS2"
tell indesign
    using terms from application "Adobe InDesign CS3"
        get active document
    end using terms from
end tell
Does this mean my CS2 dictionary is broken? I can view it fine from the Script Editor, and I've seen things like "active document" used in example scripts, so this syntax error is confusing me.

I'm not sure why you're getting that error, but a couple of things:
Using "document 1" instead of "active document" is not a bad habit,
because there are cases where active document doesn't work.
When you compile the scripts, the version is somewhat irrelevant -- when
you go to run them, they look for a running application of the same creator
code, and use that. It's a bit like when you double-click on a document in
the Finder -- it doesn't matter what version of ID you made it in, it will
try to open in whatever version is running first.
Shane Stanley <[email protected]>
AppleScript Pro Sessions <http://scriptingmatters.com/aspro

Assertion error when compiling ANSI C code - Forte 6.2

I have a compilation error when compiling on my Ultra 10
using Forte 6.2 C compiler (5.3). Here's the line:
teds@enigma[195]% cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil !!
cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil -xO4 -DCMO_DEBUG_DETAIL -DUSE_DATACONN -c cmoisubs.c -o cmoisubs.o
cg: assertion failed in file ../src/ms_pipe/sp_interface.cc at line 689
cg: Internal error: constval annotation set on reg with multiple defs
cg: 1 errors
cc: cg failed for cmoisubs.c
teds@enigma[196]%
Does anyone have any ideas?
Thanks,
Ted

Are both files in the same directory? Is the directory in your classpath?

ERROR:HDLParsers:3370 Compile Error when compiling for NI-5640R

I'm trying to get a FFT Core working inside the NI-5640R FPGA. In my latest debugging step, I have received the following error when compiling:
Compiling vhdl file "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" in Library work.
Entity <bushold> compiled.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 142. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkMaxWidth.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 143. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkCounterWidth.
Has anybody seen this before? I am including my FPGA VI that is causing this error (FFT (FPGA).vi). I am also including my previous step in debugging the FFT that worked (FFTworking (FPGA).vi).
Attachments:
FFT (FPGA).vi ‏125 KB
FFTworking (FPGA).vi ‏119 KB

Hi,
The main cause of this error message is the large array size. You configured a 16-bit fixed-size array with 4096 element for a total array size of 65536 (16 * 4096). Array uses a lot of FPGA resource and the general recommendation to limit the use and size of array as much as possible on the FPGA VI. This VI will certainly overmap the FPGA resource because of the large array size.
Although this error message is not directly related to the array size, it has however been reported to R&D (#4G3COBJ0) for further investigation. A possible workaround would be to reduce the size of the array or use DMA FIFO to pass the data to the host.
Thanks for the feedback!
Tunde A.
LabVIEW FPGA

[svn:bz-trunk] 21394: bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX .

Revision: 21394
Revision: 21394
Author:   [email protected]
Date:     2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HDL Interface Node (UsingFilterCore.vi) and "timing constraint" error when compiling

I'm trying to use the HDL interface node in LV8 FPGA with a PCI-5640R and had the "timing constraint" error when compiling my VI, however, the same VI was successfully compiled on a CRIO-9104, it seems the FPGA on PCI-5640R is not good as the one on CRIO-9104, or I'm not using it right. could you please kindly help me out?
I tested it with the sample code downloaded from NI website
( http://zone.ni.com/devzone/conceptd.nsf/webmain/456722DDDE17986A86256E7B0065EE6F ) which demonstrates using an IP core for a filter. To simplify it, I only keep the HDL Interface Node and the While Loop (see "UsingFilterCore.vi" in attached zip file), and then I created 2 projects including this VI (1 for CRIO-9104, in sub folder "CRIO-9104", the other for PCI-5640R, in sub folder "IFRIO 5640"). When opening the 2 projects separately in LV8.0 and selecting the VI for compile, the one for 9104 passed and the other failed. Here I attach the source code, error message screenshot and the NIReport from MAX, hope you can reduplicate the problem.
Can you help me out？ Thanks very much !
Message Edited by Jerry_L on 03-26-2006 09:28 PM
Message Edited by Jerry_L on 03-26-2006 09:29 PM

Hi Jerry,
I'm just tried to make all these steps by myself (http://zone.ni.com/devzone/cda/tut/p/id/3516). I have generated FIR filter using Xilinx ISE and got *.VHD file which was going to use in HDL Node.
In the Parameters tab of the HDL Interface Node configuration dialog, double-click in the Names column to add parameters. Create parameters as shown below.
Next, switch to the Code tab. Notice that your parameters now appear in the entity section. To complete the next two sections of code, you will need to refer to the filt.vhd file that you generated earlier and interface the filter core to the LabVIEW FPGA execution system.
1. The first problem I met was integrating VHDL code from earlier generated *.VHD file to CODE tab in properties of HDL Node. Content of entity section in *.VHD is not the same that in your attached file. Please check it in attached files. I'm sure this is the main reasen of problem.
Next, switch to the External Files tab. Click the Add File button and select the filt.edn file that you created earlier. This is the EDIF netlist file that you generated earlier.
2. I have no idea where can I get it and when during filter generation using Xilinx ISE it was generated too. How can I get it? I had to use your attached file filt.edn.
3. After that I have made the same schematics like you have in your VI FPGA and try to run. But I've got two error messages:
HDL Interfave node: enable chain not handled. Details: Refer to the documentation for the correct assignments for the enable_out output from your HDL code.
HDL Interfave node: output not handled. Details: Right-click the node, select Configure to open the Configure HDL Interface Node dialog box, and use the Code tab to handle all output parameters.
Actually I need to model FIR filter:
Bandwidth 200-600 Hz
Sampling 8 KHz
Attenuation 80 dB
That's why I tried to follow all these steps by myself to understand how does it work.
Thanks a lot.
Nikita
Attachments:
Filter1.vi ‏16 KB

Pragma error when compiling with SDK X

Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
Magda

Without seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

.class expected error when compiling

Ive been getting this frustrating error when compiling. My program is essentially supposed to add the values in two matrixes and return a new matrix using the added values
Heres my code:
   public Matrix add(Matrix comp)
        int[][] temp = new int[this.numRows()][this.numCols()];
        for (int a = 0; a < comp.numRows(); a++) {
            for (int b = 0; b < comp.numCols(); b++) {
                temp[a] = this.myCells[a][b] + comp.getVal(a, b);
Matrix addedMatrix = new Matrix(temp[][]);
return addedMatrix;
heres the constructor for Matrix object:
public Matrix(int[][] mat)
        int[][] myCells = new int[mat.length][mat[0].length];
        for (int i = 0; i < mat.length; i++) {
            for (int j = 0; j < mat[0].length; j++) {
                myCells[i][j] = mat[i][j];
    }getVal, numRows, and numCols are all helper methods that just return values.
The error is '.class' expected in the line which says Matrix addedMatrix = new Matrix(temp[][]); I checked for extra brackets but there dont seem to be any.
Any help would be appreciated. Thanks.

I think you just needMatrix addedMatrix = new Matrix(temp);

Error when loggong on for external ID "": Error during SAML 2.0 logon

Hi,
I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
N SAML20 SP (client 400): Incoming Response
N SAML20 Binding:          POST
N SAML20 IdP Name:         http://xxxxxx/adfs/services/trust
N SAML20 Status Code:      urn:oasis:names:tc:SAML:2.0:status:Responder
N SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
N SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
N *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c       16519]
N {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
N *** ERROR => SAML-Trace: Returncode = 222 [sign.c       16519]
N *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c       16519]
N *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c       16519]
I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
I have added the identity provider through transaction SAML2, but it does not seem to be working.
Here is a decrypted SAML assertion:
<samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
Version="2.0"
IssueInstant="2015-04-02T00:21:06.477Z"
Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
>
<Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
<ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
<ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>xxxxxxx</ds:SignatureValue>
<KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
<ds:X509Data>
<ds:X509Certificate>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</ds:X509Certificate>
</ds:X509Data>
</KeyInfo>
</ds:Signature>
<samlp:Status>
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
</samlp:StatusCode>
</samlp:Status>
</samlp:Response>

Hi Brian,
I am not sure but you could check below thread and couple of sap note.
Single Sign On - Sharepoint 2010 to SAP using ADFS
1799402 - Automatic account creation for SAML 2.0 SP
1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
It may help you to resolve / identify the cause of the issue.
BR
AKJ

Error in compiling swf for Flex 2 application

Hello experts!
After applying SPS 7 for EHP1 7.0 I am receiving the following error when deploying my model.
Error in compiling swf for Flex 2 application. The log is appended below.
I realized the error only occurs when I use value help.
Can anybody advise please.
Thanks,
Ibrahim
Error in compiling Flex application: /usr/sap/QJB/JC01/j2ee/cluster/server0/GUIMachine_Business_Packages/[xxx]MyModels.QM.Tab_test/FLEX_COMPILATION_FOLDER/AAD3KX_P.mxml(17): col: 145 Error: Element type "vc:LabeledDropDown" must be followed by either attribute specifications, ">" or "/>".
<vc:LabeledDropDown comboHeight="16" width="200" labelField="text" selectedIndex="{VC.getEnumIndex(AXCWV1, AAA3L21.Current.SELOP_TYPE || "BT", 'value')}" valueProperty="SELOP_TYPE" valueObject="{(AAA3L21.Current)}" id="ACA3L21_DropDown1" dataProvider="" comboComponent_y="40" prompt="" label="{(Languser1.BhlfcdeBHckjkGcInkHE)}" comboY="40" visible="{DE.NOT(false)}" creationComplete="AXCWV1.addEventListener(InfosetEvent.DATA_REFILLED, selectDefaultACA3L21_DropDown1)" component_x="88" x="8"/>
Edited by: Ibrahim Ibrahim on Apr 15, 2011 1:19 PM

We have solved this by applying note: 1510453 - Certain default values in list-based controls causes error

Error when compiling invalid object XLA_00555_AAD_C_011117_PKG

Hello folks,
i am getting error when compiling the following object.
XLA_00555_AAD_C_011117_PKG
here i have mentioned below is what i have done for that invalid object.
SQL> select owner,object_name,object_type
2 from dba_objects
3 where status='INVALID';
OWNER
OBJECT_NAME
OBJECT_TYPE
APPS
XLA_00555_AAD_C_011117_PKG
PACKAGE BODY
SQL> connect apps/apps
Connected.
SQL> alter package XLA_00555_AAD_C_011117_PKG compile body;
Warning: Package Body altered with compilation errors.
SQL> show errors;
Errors for PACKAGE BODY XLA_00555_AAD_C_011117_PKG:
LINE/COL ERROR
32209/1 PLS-00103: Encountered the symbol "NVL" when expecting one of the
following:
* & - + / at mod remainder rem then <an exponent (**)> and or
|| multiset
The symbol "*" was substituted for "NVL" to continue.
32209/23 PLS-00103: Encountered the symbol "=" when expecting one of the
following:
. ( * % & - + / at mod remainder rem then <an exponent (**)>
and or ||
The symbol "* was inserted before "=" to continue.
LINE/COL ERROR
Please Provide me solution as soon as possible
Regards,
Farook

Not exactly a custom object.
XLA%AAD%PKG packages will be built dynamically by the XLA's AAD compiler. This will be used while generating the accounting entries.
This error may occur due to two reasons:
a) missing source, which is used in the setup
SELECT *
FROM xla_conditions xc
WHERE application_id = &appl_id
AND xc.source_code IS NOT NULL
AND NOT EXISTS (SELECT 1
FROM xla_sources_b xsb
WHERE xc.source_application_id = xsb.application_id
AND xc.source_type_code = xsb.source_type_code
AND xc.source_code = xsb.source_code);
b) wrong conditions in setup
SELECT application_id,amb_context_code,entity_code,event_class_code
,accounting_line_type_code,accounting_line_code
,segment_rule_detail_id,description_prio_id
FROM xla_conditions xc
WHERE application_id = &appl_id
GROUP BY application_id,amb_context_code,entity_code,event_class_code
,accounting_line_type_code,accounting_line_code
,segment_rule_detail_id,description_prio_id
HAVING COUNT(*) > 1
AND SUM(NVL2(source_code,1,0)) <> SUM(NVL2(logical_operator_code,1,0)) + 1;
For (a) check any patch available for the missing source. Otherwise contact Oracle Support.
For (b) check the condition of the JLT / JED / ADR, whether anything is wrongly entered.
By
Vamsi

Error when compiling code for crio 9068 using LV 2014 SP1

Similar Messages

Maybe you are looking for