Error when conneced over network

Hey guys,
I have been using two basler cameras to perform vision acquisition and has worked fine the last two months while in development, however i have now started to deploy this on two other machines in the workplace and have conected over the network, i can ick up the cameras but i cannot acquire images it tells me the camera did not receive a test packet,the test packet size might be too large for network configuration or firewall is enabled. my test acket size was 4000. I have changed no settings so i am confused as to why now it does not work. The firewall was always disabled. Any suggestions welcome
Damien
Solved!
Go to Solution.

Does it have to be connected through the company network?  There is probably a lot of non-camera data moving around on the company network, so it is probably messing things up.  I always set up my DAQ or vision systems on their own network to avoid the problem.  Vision systems especially send a lot of data over the network, using a large percentage of the bandwidth at full speed.
Are you trying to do continuous, high speed acquisition, or just snapping a frame every now and then?  I would try snapping a single image to see if that works, then work your way up from low speed (1 frame/sec) to whatever you need.
Can you check your percentage of bandwidth use when connected directly?
Bruce
Bruce Ammons
Ammons Engineering

Similar Messages

  • Runtime Error when doing a Network migration

    I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
    termination)
    - It happens when I am doing a network migration (with and without crossover
    connection)
    - The moment I choose Current User or when I choose next after choosing the
    user in Multiple Users
    - It works on other machines, could it be something to do with the user
    account I am trying to migrate?
    Kevin VanSchepen

    Actually it also happens when I don't do a network migration. I choose -
    create - and it errored when I choose Current User.
    >>> Kevin VanSchepen<[email protected]> 3/23/2006 9:37 AM >>>
    I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
    termination)
    - It happens when I am doing a network migration (with and without
    crossover
    connection)
    - The moment I choose Current User or when I choose next after choosing the
    user in Multiple Users
    - It works on other machines, could it be something to do with the user
    account I am trying to migrate?
    Kevin VanSchepen

  • Why does my ibook HD show a different name when accessing over network?

    I am including the details below for some industrious soul to peruse. In a nutshell, I have renamed my old computers internal drive (no problem), but when I connect to it via network from my new computer it still comes up as the old HD name instead of the new name that I gave it.
    Is this normal to have the name of the HD sitting on the desktop not be the same as the name seen when connecting over my LAN? Or am I seeing the beginnings of trouble? Permission repairs don't come up with anything, nor does Disk Utility.
    Thanks for the advise, and here's the details:
    After buying a new iMac, I decided to rename my ibook's drive from Macintosh HD to iBook HD-- so I wouldn't confuse myself when networkign the two together. Seems I have confused the computers, however. After renaming my ibook HD, when I connect to it over my network I see the following under My Network:
    TBB iBook G4
    TBB-ibook-G4
    Thomas Bailey 2's iBook G4 (apparently this comes from an administrator account I temporarily created and then later deleted)
    When I click on the first computer name, I get the Connect to Server dialog Box, where I put in my main admin user login info. I then get a shoice of volumes to mount, which shows my admin user name and the old name of the hard drive (Macintosh HD).

    Hi Thomas!
    Is your iBook hard drive possibly the same name as one of your account names?
    bill
      Mac OS X (10.4.10)   1 GHz Powerbook G4

  • [SOLVED] DBus error when accessing "Windows Network"

    I'm getting an error when trying to access "Windows Network" from Nautilus after last Gnome (2.22 -> 2.24) update:
    Unable to mount location
    DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
    Please tell me if you need me to post any more info/logs.
    Thanks in advance
    Last edited by DingoMD (2008-10-22 08:07:36)

    Are those with a problem using share level security on the samba server?
    Have you tried accessing the share using smbclient? (smbclient //server/share)
    I have been receiving the original dbus error for some time now.
    I am using share level security on the server.
    Using smbclient results in a segfault. Using nautilus also results in an error from libsmbclient which can be seen in one of the log files.
    [mythtv@tvee ~]$ smbclient //sirschmoopy/shared
    Enter mythtv's password:
    Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.1]
    Server not using user level security and no password supplied.
    Segmentation fault
    There is a samba bug which looks similar but it only affects people with ipv6 disabled. I have disabled and enabled ipv6 several times and the errors persist.
    I think it may be related to this bug: https://bugzilla.samba.org/show_bug.cgi?id=7250
    I haven't tried the patch provided yet.

  • Error when looping over list

    Looping over a series of lists created from form fields
    generates an error when one of the fields on the form has been left
    blank. The form is a list of event dates, start times and end
    times. One event can have a number of times.
    When the end time is uncertain, we want to leave it blank.
    However, doing so shortens the list created from #form.endtime# so
    that the lists don't match and there's an error message:
    "Invalid list index 2.
    In function ListGetAt(list, index [, delimiters]), the value
    of index, 2, is not a valid as the first argument (this list has 1
    elements). Valid indexes are in the range 1 through the number of
    elements in the list."
    How do you get around this problem? Tx.

    yoman,
    No need for separate forms. Use a counter to number each
    group of field names
    <input name="EventDateID1" ...>
    <input name="EventDate1" ...>
    <input name="EventDateID2" ...>
    <input name="EventDate2" ...>
    Then loop through the form fields on your action page
    <cfloop from="1" to="#form.maxCounter#"
    index="counter">
    <cfset EventDateID = form["EventDateID#counter#">
    <cfset EventDate = form["EventDate#counter#">
    ... rest of fields
    <cfquery name="UpdateFeatures" datasource="#dsn#">
    UPDATE EventDates
    SET EventDate = '#EventDate#', ....
    WHERE EventDateID = #EventDateID#
    </cfquery>
    </cfloop>
    You should validate the values and/or use cfqueryparam

  • Unknown API error - when hoovering over new DVD's at Redbox

    Loaded Firefox 4 yesterday and this morning when checking out new releases at Redbox I got this error "unknown API error" while hoovering over new releases. If you hoover over a DVD it details what the DVD is about but, instead of the details I got the above error. Prior to Firefox 4 release (earlier versions of Firefox) I did not get this error, and I do not get this error in IE 8 or IE 8 (64-bit edition) - unfortunately.

    Redbox says related to browsers not being updated; I don't think that is the case...must be a problem with Redbox..doesn't happen on any other of the numerous sites I visit...

  • "The system cannot find the path specified" error when installing a network printer running Win 7

    Some of the end users are having issues when trying to install network printers. We have created a portal where they can locate the printer they want to connect to, click connect, and the printer will download with the correct drivers on their PC's. The
    entire company is running Win 7 for their operating system. One end user in particular has had issues installing multiple printers from the portal, when I go to test installing these same printers on my PC, they all install successfully. trying to figure out
    why some end users hav issues with installation and others do not. They will get the error, The system cannot find the specified path. Any help would be great

    Hi JeffWilko,
    What is your current situation?
    To receive better analyzation, please provide more details?
    1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
    2. Check the event viewer and share us the related error log.
    Please take the following steps for troubleshooting:
    1. Ping the printers
    2. Check if there are network firewall to block the access
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Missing files when copying over network

    I've had a good search for people with similar problems on Discussions, and there are a few mentions of similar occurences. Here's my summary though.
    I have 2 Macs, and frequently transfer files from one to the other by sharing drives and using the Finder.
    However, quite often, when transferring lots of files, they are sucessfully copied but do not show in Finder on the receiving machine. The files are there (using Terminal to explore the directory reveals the files in question), but Finder just doesn't acknowledge any existence of the "missing" files.
    This problem can usually be cured by creating a new folder in one of the affected folders - this somehow kicks Finder into refreshing the folder's contents.
    Removing the .DS_Store file(s) (again, via Terminal) in the copied folder also resolves this issue, leading me to believe that the problem lies with the .DS_Store files.
    I cannot believe I am not the only user who frequently finds themselves having to do uneccesary Terminal work to reveal files which appear to be missing after copy over the network.
    Is Apple aware of this problem? Does anyone else have any workarounds?

    I don't think I have experienced that exact problem however, I am such a Unix geek, I typically do my in-network transfers between Mac machines using SCP at the shell prompt in Terminal.
    Finder refresh on the other hand I have experienced before although I cannot provide a situation or example.
    Usually if it needs a refresh, I believe all I ever do is navigate away from the folder, then back to it. Or if it is the Desktop in question, using Exposé to show it, a single click on an empty space there will make the newly copied items appear.
    Beavis2084

  • Error When Printing on Network Printer

    I am trying to connect to a windows network printer through my MacBook Air. I can connect to the printer via the windows network and can send documents to print.
    The document goes through to print but at the last second it says there is an error.
    When looking on the network windows computer, in which the printer is installed, I can see the document has gone through to print using the printer dialogue box for microsoft, but it details there is an error and the document doesn't print.
    It seems that they are connected but there is still an error.
    Both Windows and Mac computers are up to date currently and the printer is a HP Deskjet F4180.
    Appreciate any help.

    The problem is that HP wrote their driver(s) to only use the comm protocol they wanted to support. In your case, bonjour via USB (&/or Wifi?).
    You need a different driver - that can use all the standard comm protocols available in OS X, like Windows printing.
    (remember that I don't have your printer to test this)
    Try the 3-part driver set hpijs from here (it says for 10.8, but others say it works with 10.9):
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx

  • Finder Freezes when Mounting over Network

    I have a network set up and can see the computer I want to access in Network. When clicking to log into the computer, it asks for username/password as usual. Then it asks me what drives I want to mount, so I select the one I want and then a box comes up saying mounting, with a progression bar, but it just sits there and never mounts. The box remains in the foreground so to get rid of it I have to restart the computer. I really want to be able to access the drive over the network. Any ideas?

    Hi Phil, and a warm welcome to the forums!
    One thing to check...
    In finder, select Go menu>Go to Folder, and go to "/volumes".
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1, and reboot.
    You may also have to trash this file & reboot...
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Also, once you do get them to mount...
    Mount that Share once, then once the Globe Icon shows up on the Desktop, drag that Globe Icon to the right side of the Dock between Applications & Trash. You now have a Dynamic Mount, a quick click on the Icon in the Dock will connect you.
    On the multiple Shortcuts...
    Mount them all, when show up on the Desktop, then create a new Folder maybe named Shares on/in the Desktop, drag all those Shares shown on the Desktop to that Folder, (you can even rename them once there, if you wish), drag that Folder to the right side of the Dock between Applications & Trash, this should give you a popup menu to select from.:-)

  • Error when hoovering over charts

    Hi, <o:p></o:p>
    I have problem with a Power Bi report I have created. The report contains 8 Power View report which contains tables and charts. I have
    the latest Silverlight version installed on my computer. When I hoover over a chart I get the following error:<o:p></o:p>
    MS.Internal.WrappedException: [Arg_COMException]
    Arguments: 
    Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30514.00&File=mscorlib.dll&Key=Arg_COMException --->
    System.Exception: [Arg_COMException]
    Arguments: 
    Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30514.00&File=mscorlib.dll&Key=Arg_COMException
       at MS.Internal.XcpImports.FrameworkElement_MeasureOverride(FrameworkElement element, Size availableSize)
       at System.Windows.FrameworkElement.MeasureOverride(Size availableSize)
       at System.Windows.FrameworkElement.MeasureOverride(IntPtr nativeTarget, Single inWidth, Single inHeight, Single& outWidth, Single& outHeight)
       --- End of inner exception stack trace ---<o:p></o:p>
    Anyone who have experienced something similar and have solved the problem?
    <o:p>Regards</o:p>
    <o:p>Cecilia</o:p>

    HI,
    try changing in your OS the settings Formats in "Region and Language" with those English (USA).
    Regards.
    Gianluca Pinelli

  • Memory error when selecting a network printer in print dialogue

    Hello,
    I have the following situation:
    Adobe Acrobat 9.0 was installed with a 30-days trial together with Adobe Reader 9.1.3
    Worked perfectly
    I uninstalled the trial and got Adobe Acrobat Pro 9.0 installed.
    From this point on, whenever I open the print dialogue and select a network printer, the application crashes with an memory violation
    The instruction at x referenced at y. The memory could not be read.
    This happens in Acrobat Pro as well as Adobe Reader.
    If the trial worked and the Pro does not, do I have to clean the system somehow before installing the full version?
    Thank you

    Hi JeffWilko,
    What is your current situation?
    To receive better analyzation, please provide more details?
    1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
    2. Check the event viewer and share us the related error log.
    Please take the following steps for troubleshooting:
    1. Ping the printers
    2. Check if there are network firewall to block the access
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • JScript Error when mouse over active session chart.

    Whenever I mouse over the chart to change the vertical box indicating the time slice you're dealing with I get an error.
    It says:
    'tipBoxNode' is null or not an object
    line: 153, column 11
    Not sure what to say. I have the latest SVG installed. I'm using IE7
    The OEM version says:
    Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0

    'tipBoxNode' is null or not an object
    line: 153, column 11Getting "'tipboxnode' is null" message from 10.2.0.4 Grid Control
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=565594.1
    Top Activity Chart Errors: 'TIPBOXNODE IS NULL OR NOT AN OBJECT' ERROR IN TOP ACTIVITY PAGE
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=737052.1

  • Anyone still experiencing errors when syncing over WiFi?

      I have upgraded to the latest version of iTunes and I still get this error... "An (iPhone/iPad) has been detected, but it could not be identified properly. Please disconnect and reconnect the iPhone, and try again."  There are less errors than with the previous version of iTunes, but this error is still very annoying and causes the sync to pause until dismissed.  Anyone have a solution?

    Greetings,
    That be normal, my friend. You can use the cable that came with the iPhone, or use WiFi, either way works fine.
    Cheers,
    M.

  • Clips fall off sync when transferred over network.

    We've had the same network for almost 2 years now. Since we updated one of the computers the clips fall off sync, as if the machine is magically taking the slip/slide tool and using it itself. We updated the other mac to 6.0.1 as well, but still same problem. Can anyone help please?

    Project files are just copied from one machine to the other, we never work on the same file at the same time
    Where does your media live? If I had to guess I would say that you are trying to edit across the network. This means that your media lives on one machine and you try to edit it on the other. Is this what's happening?
    If this is what you are doing then you will continue to have difficulties. Networks are just not fast enough to handle media this way. Count your blessings that you did not have any trouble for two years. Now is the time to rethink your workflow.
    K

Maybe you are looking for