Error when connect huawei e220 on macbook pro

any one can help me...does e220 compatible with macbook pro ?

I wrote a howto that applies to t-mobile in the UK however it can be adapted to be used with any provider. you just need to know your providers APN, dial string and username and password (a username and password is not always necessary)
I have the HUAWEI mobile E220.
Using the drivers that came with my T-mobile webnwalk pack it worked first time in leopard.
You can get the drivers from my dot mac space
http://homepage.mac.com/timhaigh/E220_Drivers.zip
Once installed you can use the HuaweiDataCardApp to set your APN.
I don't require anyother 3rd party software to make the conneciton.
I went to SystemPreferences-->Network-->Location -->Edit Locations
click the +
I added HSDPA as my location name.
Then I chose add configuration
I called it 'T-Mobile'
I used *99# as the telephone number
my provider does not require me to use a username and password so I left that blank.
I checked 'show modem status in menubar'
Then click Advanced.
click the modem tab
Vendor:Other
Model: Huawi Mobile Connect
I have enabled error correction checked
Dial mode 'ignore dial when dialing'
Then click the PPP tab
Settings:configuration
uncheck 'send PPP echopackets'
Then click ok
then Apply
Now to engage the connection I plug in the usb modem wait for the green or blue light to flash.
I goto the menubar modem icon and choose Connect HuawaiMobile
This works.
Now to monitor my modem signal, usage etc I use cheetahwatch
http://m.ac.nz/cheetahwatch/
Good luck

Similar Messages

  • Iphone 4s error when syncing with iPhoto on Macbook Pro

    Hello everyone,
    The screen on my wife's iPhone 4s went out so I am trying to sync the pictures to iPhoto on our Macbook Pro.  She has 6,000+ pictures on the iPhone but when syncing to the computer iPhoto is able to read them all.  The problem is that when I hit the sync button or Import button it only reads about 200 or so photos then gives an error saying there was a problem with one of the pictures on the device so it can't sync at all.  The photos are the only thing that is important to us on the device so any help would be appreciated.  Thank you in advance to anyone who can help.  Also if anyone can recommend a different way or app or system to get them off using the Macbook Pro since the iPhone 4s screen is out i'm open to suggestions.  Thank you again.

    Image Capture (in the Applications Folder)?

  • Fixing display when connecting HP monitor to Macbook pro

    Hi There, I'm trying to connect a HP Monitor to my macbook pro but the display on the HP monitor is all weird, any advice on how to fix? I'm using the screen adaptor that the apple store sold me, so not sure if another adopter is needed.

    Hello, Framed Kanga. 
    The article below will walk you through some troubleshooting steps when experiencing issues with external displays. 
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Cheers,
    Jason H. 

  • My external monitor will no longer stay on when connected to my '10 MacBook Pro.

    When I plug it in, it comes on for about 5 seconds and turns off. I've tried two separate adapters and it just finds the monitor, it turns on, then it sleeps. . . permanently.
    Something changed in the sytem a while back that allowed the system to choose the best resolution for the monitor. It seems like it stopped working after that.

    Simplest thing to try is a PRAM reset.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Excerpt from http://support.apple.com/kb/ht1379

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • I have a 3rd gen Ipod touch and when i connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I connect this older iPod to my iTunes?

    I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?

    Hi ChristianHelpplz,
    Thanks for visiting Apple Support Communities.
    It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
    I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
    Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable.
    Restart your device
    Restart your iOS device or reset your iPod.
    Restart your Mac
    Turn your Mac off and back on.
    Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software.
    From:
    If you don't see your connected device in iTunes for Mac - Apple Support
    If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    Jeremy

  • Recently when I connect Iphone 4s and MacBook Pro my computer stopped see new photos on Dropbox.

    Recently when I connect Iphone 4s and MacBook Pro my computer stopped see new photos on Dropbox.  I have changed iCloud password on Mac and Iphone, nothing.  Deleted some pictures of iPhone, didn't help.  Any ideas what I did to mess this up?

    I cannot deleted.  Computer keep telling that my dropbox is open.  Don't see how to shot it off.  Do I need to delete all pictures from dropbox first and delete application after.  Will I loose all these pictures? Usually, I copy all photos to iphoto app.

  • Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor

    Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor.
    On SOUND preferences, I don't have the option for chosing HDMI on the OUTPUT sound.

    Do you have another HDMI port that you can switch to on the TV? Is the tv source on the matching HDMI port with the volume up? After checking those try the following:
    PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
    SMC Reset: http://support.apple.com/kb/HT3964

  • I recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

    i recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

    So it is cutting off the end at 59 minutes?  How large is the file that is being exported?  You may be running up against a file size limitation.

  • Disconnect or connect the bluetooth makes MacBook Pro restart.

    I have a MacBook Pro 13 inch, mid 2010, running OS X 10.9.2.
    Everytime (well, most of everytime) when the bluetooth disconnects from my wireless device,
    Such as:
    *Out of bluetooth distance
    *Manually turn off bluetooth connection on macbook pro
    *Switching off bluetooth on mouse (means connection dropped with the mac's bluetooth)
    *Bluetooth device out of batteries (means connection dropped with the mac's bluetooth)
    *Connecting bluetooth mouse to macbook pro
    *Turning on bluetooth (and then when its auto trying to connect to bluetooth device)
    From all the incident above, not all at a time, but time to time, performing one of the event above will cause my MacBook Pro to restart / force restart it self.
    Sometimes it comes with an white error note screen after restart, asking press anybutton to continue. Anything related to bluetooth disconnecting and connecting makes mbp restart and it's really getting me annoyed and frustrating.
    My macbook pro just out of the service center less than six month ago, replaced / fixed / tested all the parts for the best condition as it should, no problem at time. Just found or realise this bluetooth issue last two months. Been looking some websites seems like no issue arround similar to this, so here I am with this thread.
    I wonder anyone else suffer from this, or some expert will have some magic advise to fix this issue? Software or hardware problem? I hope it is not hardware as I just literally have all brand new hardware since last service. The problem should not come this soon.

    did you try to Browse Device on Mac Bluetooth at the top-right corner? I faced the same problem but it was worked after I made macbook find my phone bluetooth.

  • Can't connect external projector to MacBook Pro running Windows7. Any suggestions?

    Can't connect external projector to MacBook Pro running Windows7. Any suggestions?

    Did you try a cable? The point is you did not provide any information about: what projector, how you are trying to connect, what happens when you try, error messages if any, does an external monitor work, what computer you have, what OS, etc.

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

  • At the Apple WWDC 2012 when they announced the new MacBook Pro, the used something to rotate it. What was it?

    At the Apple WWDC 2012 when they announced the new MacBook Pro, the used something to rotate it. What was it?

    Hello Sam,
    strangely enough, it went away by itself, and until now, it did not come back. I also believe it must be soms sort of graphic card connection failure or something like that, it`s very strange though. I also did let it know to the apple store, and explained it, and they were willing to repair it, but now everything is ok, so it has no meaning to go to the apple store, maybe for a checkup, that would be interesting maybe.
    So, I would suggest to keep on using your computer for a couple of days, and shut it down and restart it as often as possible. And when it has not dissapeared after 3 or 4 days, then it`s good I think to go to the apple store.
    If you can post here how it goes or how it went, would be nice, and if there is anything more I can help you with, let me know, kindly, Steven

  • IPad keeps connecting and reconnecting on Macbook Pro using USB.

    For the past month or so my iPad hasn't been able to connect to my 2013 Macbook Pro. I've tried solutions such as reinstalling iTunes and updating software but nothing has worked. I can connect to my PC fine but when I try to connect to the Macbook, it keeps quickly connecting and reconnecting. When I connect to the Macbook it gives me the message "iTunes could not connect to this iPhone. This device is no longer connected.". This seems to be a problem with the Macbook instead of the iPad. I haven't enabled it to connect over Wifi also.
    I've tried looking up solutions for people who have had similar problems but I haven't yet found a solution that worked for me. Any help is much appreciated.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for