Error when connect to the Blazeds!

When I connect to the Blazeds server in Flash Builder 4 an error appears：Server Error：RDS Server Information Connection Reset！
What' wrong？
Help！

Hi,
Can you please check your RDS configuration from Windows->Preferences->RDS Configuration?
Please send a snapshot of your RDS configuration and attach your web.xml for us to investigate
Thanks,
Balaji

Similar Messages

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

Error when connecting to the RDSH with WebApps

I have a Server with RDGW, RDCB, RDWA. Then I have an other Server with RDSH installed. I published some Apps from the RDSH. When I logon now, I can see the WebApps on the Website.
If I start a WebApp, I get the connection Information:
Publisher: RDGW
Type: RemoteApp-Programm
Path: Calc
Name: Calculator
Remote Computer: RDSH name (is unknown for the client, But the RDGW knows this server from DNS)
Gatewayserver: RDGW
Then I get an Error:
Disconnected Remote App
All Certificates are trusted (I don't get any certificate error message).
---------------- 10.48.40.36 ------------------------------ 10.253.24.101 ----------
|Windows 7 |-----------------------| RDWA / RDGW /RDCB |------------------------| RDSH |
---------------- 10.57.27.42 ----------------------------- 10.253.24.100 ----------
The Network Adapter 10.253.24.100 is shared, so this can be accessed from the other adapter.

Yes. It's a public trusted CA. I have no Certificates warnings.
If I connect to the "internal" Address (10.253.24.100) then it works perfectly.
I shared the internal interface. But it seems, that I have to enable somthing else. How can I get more detailed logs?

Why is there an error when connecting to the Itunes store?

When I try to connect to my Itunes, it says there is an error and to try back later? I have never had an issue with this and am unsure what to do to fix it. Also, when I try to download the newest version of Itunes it says it can't find the file with the Itunes "installationpackage.msi"? I have never had any issues connecting to my Itunes store or downloading a newer version..

Hi gymtrainger55,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

I'm trying to use the public library to access my icloud email and I keep getting an error message stating icloud is encountered an error when connecting to the server. Please help.

I am trying to access my icloud email via a public library and I keep receiving an error message that icloud is experiencing a problem connecting to the server. Please assist.

How are you trying, using a web browser?

Error when connecting to the itunes store

Okay so everytime i try to get into the itunes store i get the message, "Itunes could not connect to the itunes store. The network connection timed out. Make sure your network settings are correct and your network connection is active, then try again." I've had iTunes for 2 years and have never encountered this problem. Its been doing this for 2 weeks now. Please help!

Hi gymtrainger55,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

SSL Error when connecting to the mail server

Hi,
i started having a wiered SSL error for some of my users on the mail servers when they connect using their mac machines to the mail server telling its the wrong username and password, but the same username and password works from the hand held devices including ipads and iphones. I checked the syslog and the maillog which is showing no errors regarding this. Althou i started getting this error com.apple.launchd[1] (org.dovecot.fts.update): Throttling respawn: Will start in 10 second for the past 1 week. i am using 10.9.1 Maverics. I can provide all the logs of the server if needed.

Make sure you are using right security protocol, for IMAP you need to enable TLS/SSL. Go to email settings> Incoming mail > Security.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

DI:Error when connecting to the Company object

Hi there,
I have come back from my holidays and I have a trouble with a quite trivial code. Here is the code:
                MyComp = new CompanyClass();
          MyComp.language=BoSuppLangs.ln_Spanish;
          MyComp.Server = "(local)";
          MyComp.CompanyDB = "SBODemo_ES";
          MyComp.UserName = "manager";
          MyComp.Password = "manager";
          MyComp.UseTrusted = true;
          int ConOK = MyComp.Connect();
          if (ConOK!=0)
               ViewError(false);
               return;
When I try to connect it gives me -8006 error (it says "Resource Error"). The parameters are OK. I have try the same code on another PC and worked OK. The only diference I have found between both PC´s is the SQL Server language (mine is spanish, the one that worked english).
I have made several tries changing the Languaje and UseTrusted properties without improvements.
My SBO version is 6.5.097 SP: 01 EF:07
Can someone give me any help?
Thanks in advance,
Ibai Peñ

Hi Carlos,
the problem you suggest is caused every time you run windows xp update (from Ms Web site) procedure or install something for OS (eg: Sdk 1.1).
To fix you have to:
1) uninstall DI Server, Server tools, SDK.
2) delete the SM_OBS_DLL directory (in your temp directory c:\documents and settings\"user"\local settings\temp (check show folders and files on options))
3) reinstall DI Server, Server tools, SDK.
That's all.
Fausto

Crystal Report That Uses Stored Procedure Errors when connecting to the DB

We had developed reports a few years ago, including one that calls a Stored Procedure on an iSeries AS400 DB2 database. We upgraded our environments to Crystal Reports 2008 and BO XI 3.1. Now, the existing report that previously ran in the old environment is not running (note that the other SQL-based reports work without a problem, only this one which uses a store procedure is not working). I downloaded the report into my local Crystal Reports designer and tried to run it from there and I got the following error message:
======
Failed to retieve data from the database.
Details: ADO Error Code: 0x
Source Microsoft OLE DB Provider for ODBC Drivers
Description: [IBM][iSeries Access ODBC Driver] Statement violates access rule: Connection is set to read only.
SQL State: 37000
Native Error: [Database Vendor Code: 30186 ]
======
{CALL "<database>"."<library>"."RELEASEDNOTINVOICE"({d '2010-03-01'})}
This call will still work from on a SQL client running on a JDBC connection. Is there some problem with the new verion of BO and Crystal Reports with using the iSeries ODBC driver?

...my issue was resolved by setting the ODBC.INI registry entry for AllowProcCalls from 0 to 1.

When deploy: Wizard error a connection to the deployment share could not be made "check physical connection"

Hello everybody,
yet another issue with deploying a masterdisk. I will give you a short explanation of the situation.
I need to deploy Windows 8.1 PRO x86.
Using: Microsoft Deployment Workbench Microsoft Version: 6.2.5019.0
1. Reference PC: Windows 8.1 PRO x86 is installed on ORACLE Virtual Box.
2. I installed MDT on my workstation Windows 7 x64, where "C:\DeploymentShare\Windows8" is located.
3. To change the Unattended.xml file, I have second ORACLE Virtual Box with
Windows 8.1 PRO x86 with MDT, which connected to the DeploymentShare of Windows 7 x64.
- The reason is because the Reference PC is x86 and the Unattended.xml file can be changed only if MDT is installed on x86 Windows, otherwise it is not possible.
The image capture is successful.
Then I create bootable USB device using rufus-1.4.12.exe. I use: C:\DeploymentShare\Windows8\Boot\LiteTouchPE_x86.iso
I use a real PC (not virtual machine) and when the deployment starts
I see:
1 Welcome screen, where I select: Run the deployment wizard to install a new operating system.
2. The next screen is an error screen where I see the error:
"Wizard error
A connection to the deployment share (\\ComputerName\C\DeployemntShare )could not be made
DHCP Lease was not obtained for any Networking devices!
Possible cause: Check physical connection
I am relatively new with MDT.
Any suggestions are more than welcome.

Nick,
Thank you for the answer!
Yesterday, I figured out that I need to create an offline bootable disk.
The issue is caused, because creating a bootable disk with rufus.exe include only the ISO file and not the WIM file. That is the reason why during OS installation process it asks me for the shared folder...

My iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears someone help!!!

my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help

Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

An error occurred when connecting to the accounting system ID3DEV310

Hi Friends,
We are Implementing collaboration project 4.5 and want to link with project system in ECC 6.0. Both these are in the different servers.
I have done the configuration on both the servers and also maintain the RFC (ID3DEV310) in Object Links.
When I create or open the existing project I get the following error: "An error occurred when connecting to the accounting system ID3DEV310"
Costing Variant taken is PS01 (Project Planning).
Your reply would be highly appreciated.
Aryan

Hi Deepak,
I have assigned the RFC destination and web server to the object type: "0WBSELEMENT" only
Also the same has been done for define Object links for accounting integration "0FIN_INT_ERP_PS"
I have entered these specific to PS objects only.
Aryan

What to do when you have internet connection but go to use an app, you get the Error message, 'An error occurred connecting to the server. Please make sure you have an internet connection' ?

Yesterday, I downloaded the twoignite app. When I went to open the app to use, this error message appeared: An error occurred connecting to the server. Please make sure you have an internet connection. I checked my connection and found I had a solid connection. I have tried closing the app and reopening it; deleting the app and redownloading it (more than once); turning off my iphone and turning it back on. None of these things have worked. Thanks.

Have you already seen this:
http://forums.adobe.com/message/5099439#5099439
Maybe you could also try asking in the kuler forum.

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet Explorer

I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
My OS is Windows Vista and using Internet Explorer

Re: what causes an error "not connected to the internet" when I try and e-mail photos

I'm having the same problem with my PhotosmartC3180. When I try to e-mail photos I get a "not connected to the internet" message despite having a web page open at the same time. I run the Print & Scan Doctor and it says everything is running perfectly. Conversely, I cannot see how to save a photo at e-mail quality and I don't want to cut and paste huge pictures that will slow down the receiver's e-mail. Thanks in advance, Wayne

Hello WayneSchlapkohl,
Welcome to the HP Support Forums!
I understand that you are looking to Email a scanned photo, but do not want the file to be to large. Are you using HP software when you get the error "not connected to the internet" ? If so, What is the Operating System installed, Windows, including version, e.g. Windows 7 or Mac, including version, e.g. 10.8?
Lowering the DPI or resolution will help keep the file size down, if you have an option for that in the software.
Also, what is the Email client are you using, MSN, Gmail, etc?
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Error when connect to the Blazeds!

Similar Messages

Maybe you are looking for