Error when connecting iPad to computer
Whenever I connect my iPad to the computer, I get this error. Anyone know why this is happening?
Take a look at the suggestions in this kb article.
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
Similar Messages
-
Unknown error when connecting ipod to computer. Always worked before. Any ideas?
I'm getting and "unknown error" when I connect my Ipod to my computer. I have always used this computer and it has always worked. Any ideas?
Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
"device timed out" when connecting ipad to computer
i have a mac book pro from 2013 and an ipad 3rd generation (as what it was labeled) from 2012 (i just got). I plug the ipad into the computer and itunes pops up and says that the device timed out and it can't connect to the computer. I have updated my mac and there are no updates for the ipad. i have tried different cords. i'm not the most tech savy, however. please help!?
This support article might be of some help.
iTunes: Resolve USB-related alerts - Apple Support
The the first thing that I always try when I have any issues connecting my iPad to my MacBook Pro is to eject my iPad, quit iTunes, reboot the Mac, reset the iPad and then try again.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons and let the iPad start up. No data is lost when you reset an iOS device.
After doing all of that, try connecting again. -
Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
When I connect ipad to computer, itunes does not show ipad on left side of page. winzip appears and says need pro version. i have apple id, etc. and have dowmloaded music to ipad previously. What do I need to do to get it to recognize ipad?
Did you set the iPad up on a Mac? I set mine up on windows and my Mac wouldn't read it so I started over. Just a thought though, not sure if that's your problem.
-
Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.
Just wondered if anyone had any other suggestions.
-
IPad 1,1 won't respond when connected to any computer, except 1
[IPad 1,1 won't respond when connected to any computer, except 1]
Symptoms:
-iPad shows no sign of recognition of being plugged into computers
-screen does not light up, if sleeping
-ipad will not turn on if turned off
-ipad does NOT say "not charging"
-ipad does NOT have lightning bolt in battery
-does not sync
-computer does not see it
-computer does not see in itunes
-windows device manerger does not see it
-If VM IS turned in mac osx the "connect to mac or windows" dialog box DOESNT appear
-iPad WILL charge IF plugged into wall using ANY cable.
-iPad will connect and act completely normal with PCG-R505DL
stats:
iPad1,1 -(warranty expired over a year ago)
-works with:
-PCG-R505DL(broken?)(old)(638MB RAM)(1GHz processor)(runs windows 7)(designed for windows xp)
-doesnt work with:
-MacbookPro9,2(8GB RAM)(2.9GHz i7 Processor)(turbo boost to 3.7GHz)(osx 10.9, windows 7 Bootcamp)
-IBM Thinkpad(1.6GHz Pentium M Processor)(single core)(1GB Ram)(runs windows 7)(designed for windows xp)
i have:
-imported the HDD from PCG-R505DL to IBM Thinkpad and installed the required drivers(didnt work)so i moved it back
-installed new copies of windows to bootcamp and other two computers(same results)
-updated all computers itunes, checked firewall, no virus software installed
-used 5 USB cables, all from apple, all work with other iDevices
-tried to restore(sucessfull on working computer), no effect on the others
-tried it on my friends new macbookpro (no effect)
-neither my iPod1,1, my iPod3,1, nor my dads iPad2,1 have any issueswith this(or other) problems
(the "1" computer menchioned in the description)(PCG-R505DL)
-is exibiting signs if imnent failure, ex. hdd cable going bad, ethernet not working, wifi card going out, CD Drive Useless, freezing, rebot doesnt work, crashing (none of these issues are present if HDD is plugged into other computer, so not a virus)
i have been having problems with this for about a year now, and ANY help is WelcomeiPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Cheers, Tom -
Error when connecting to terminal
Hello,
I have a BB 8100, Desktop manager 4.6.
Synchronization was working correctly 3-4 weeks ago.
Today, when I tried to synchronize, I had this error message:
0 x 80040fb3
I tried to debug this with the procedure of modifying Last name, first name, etc.... with no success
I tried several time to synchronize again but without success.
Now, the situation is even worse!
New message when I connect my BB to my computer. When I launch Desktop manager, I have the following error:
"Error when connecting to terminal. Make sure that your terminal is correctly connected, then try again"
I can not anymore try to synchronize!
This is very strange, it never happened before.
Nevertheless, Desktop Manager recognize my BB, as I can read on the buttom left part of the screen: Terminal connected (code Pin) recognized xxxxxx.
HELLLLP!
Thanks
Solved!
Go to Solution.Hello RianaZaire,
Unfortunately, I still have the same error Message.
I have not been able to solve the situation.
I reinstall twice the software.
I tried to connect my Blackberry to my computer with a new cable.
I still have the same error message.
I don't know what to do.
Maybe somebody will read our messages, and help us!
Maybe this information has a link with my blackberry problem:
I also have a problem with an another device. (a TOMTOM GPS system), which happened almost at the same time.
Usually, when I connect this device, it will directly open the GPS sofware ( where I can download the new updating stuff). But since this Blackberry problem, I can not do it anymore. Impossible to connect the TOMTOM onto it. It is not recognize onto my computer.
For information, I also do synchronization of my adress book between my phone and TOMTOM.
HELP HELP -
My iphone 4s connects and disconnects (repeatedly) when connected to my computer
my iphone 4s connects and disconnects (repeatedly) when connected to my computer, it works perfectly fine when connected to regular chargers, everytime i connect it to my computer it shows the charging symbol and then disconnects and reconnects in less then a second, it will repeat this process forever unless disconnected, sometimes it works perfectly fine and most of the times it does the same thing, I know for a fact its not the wire because i recently bought an ipad mini with retina and its usb is new, it worked with the retina for a day or two and then it kept connecting and disconecting repeatedly, my computer is two months old and i have new hardware in that machine, is it a problem in the usb power fluctuation? i am currently using windows 8.1 and i need solutions, this is super annoying, all my other devices work perfectly fine with the usb ports, all my usbs (2.0 and 3.0) do the connecting and disconnecting sometimes it even works ,what is the problem?
Hello Aqib2024,
Thank you for providing the details of the issue you are experiencing with your iPhone 4s. You have taken some really good steps to isolate the issue. I recommend following the steps in the article below to further isolate and troubleshoot this issue:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50). How do I fix this?
Try restarting everything and then try to sync or reactivate. Quit iTunes, reboot your computer, reboot your iPad and then try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Asks me to connect ipad to computer to download new apps, unable on wifi?
everytime i try and download new apps when connected via wifi, it asks me to connect ipad to computer, can't seem to download new apps straight to ipad?
Not sure how this setting works, but do you have restrictions enabled on your iPad? I don't make use of the setting so I'm not sure if you would see that message in the App Store when you try to download.
Go to your home screen, tap settings, go to general and check restrictions and see if you do have it enabled. If you use a passcode with your IPad you may have restrictions set up. But like I said, I really don't know how restrictions work with reference to what messages you would get on your iPad.
Message was edited by: Demo -
How do I set my iPhone 3G to sync automatically when connected to my computer?
How do I set my iPhone 3G to sync automatically when connected to my computer? The button to "Open iTunes when this iPhone is connected" is checked, and iTunes opens automatically, but it no longer syncs automatically as it did before the last update. Now I have to hit the "Sync" button each time; much less convenient as I have to frequently update my calendar.
On my iTunes at the top menu, in the Edit drop down menu, at the bottom is Preferences, click that, then pick icon Devices. Then in the middle there are check boxes, one has Prevent ipods,iPhones, ipads from syncing automatically. Try to leave this box empty. See if this helps.
-
When connecting ipad to my iPhones personal hotspot via wifi it is showin up as 2 connections when only 1 device is connected. Is someone hacking my phone? I only figured out I had a problem when my partner did the exact same set up and it showed up as only 1 device connected. I have changed the password and turned it off/on and etc. the really weird thing is now when my ipad is turned off and I turn my iphone personal hotspot on it shows up with 1 connection (when I don't have anything connected) for about 5 secs and then goes off and then 1 device connected for about 5 secs and then back off. This just keeps going on and off. What is going on. Could my phone have a bug or be hacked. Please help as it is kinda freaking me out. Thanks.
Hello asrt17,
This may occur if your iPhone is connected to your computer via USB, as it will automatically share the connection via USB.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
When Personal Hotspot is enabled, your iOS device automatically shares your Internet connection with your computer when connected using USB.
Example: When you connect iPhone to your computer to charge or sync with iTunes. To avoid unnecessary data charges, turn off Personal Hotspot when not in use.
Cheers,
Allen -
I forgot iphone 4 passcode and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
my ipod touch 2nd generation is no longer reconized in itunes when connected to my computer. I have tried different ipod cables and nothing works.
Hi Imminnie,
Thanks for using Apple Support Communities. If iTunes doesn't recognize your iPod touch, this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari
Maybe you are looking for
-
Inactive InfoObjects in MultiProvider based on InfoSet after Upgrade NW04s
We are upgrading our sandbox environment from BW 3.5 to NetWeaver 2004s or BI 7.0. We have done a technical upgrade and are currently using the obsolete authorizations. In testing we have discovered that our MultiProviders that are based on InfoSets
-
BI content to install customer Infobjects
Hi Gurus , I want to Create customer sales query , for this I went into bI content to install customer Infobjects , but these infojects are not coming in rsa1 infobjects screen where we create infobjects so that i can transfer standard infoobjects in
-
Can I put a WMV movie in an iWeb page?
Search results on the topic in this forum seemed inconclusive to me. I would like to publish an iWeb site to .Mac with a WMV in one of the pages. I am aware that I can convert WMVs to QuickTime, but that's not my goal. I want a Windows user to be abl
-
HT1212 how to unlock my iPad???
how to unlock my ipad
-
How can I tell if my iPhone 3gs is being bugged?
I'm almost certain my ex has bugged my iphone. How can I be sure and how can I remove it? Thanks!