Error when connecting Portal to ECC system

I am trying to connect Portal system to our ECC system.
We are on Portal 7.00 ECC 6.0. Portal is on SP 18
I performed following activities:
1. Created certificates on both sides and imported them
2. Created the ECC system in Portal with followin values
1) Connector:
     Application Host : pos_bmt.com:8000
     SAP Client:100
     SAP System: REC
     Port: 3200
     System type: SAP_R3
   2) Web AS:
     Web AS Host Name: pos_bmt.com:8000
     Web AS Path: /sap/bc/bsp/sap
     Protocol : http
   3) ITS
     ITS Host Name: pos_bmt.com:8000
     ITS Path: /sap/bc/gui/sap/its/webgui/
     Protocol : http
   4) User management
     Authentication: SAP Logon Ticket
     Logon Method: SAPLOGONTICKET
     User Mapping Type: admin, user
3. Crearted Alias and did connection test
   1) SAP Web AS Connection was successful
   2) ITS Connection was successful
   3) Connection Test for Connectors was successfu;
After then, I created an iview, but I was promted to login with an error : u201CSSO logon not possible; cookies must be activated in the browseru201D. So I performed a test on the support desk, SAP GUI for windows was successful, but SAP GUI for html was failed with the same error message, u201CSSO logon not possible; cookies must be activated in the browseru201D]
Any feedback would be greatly appreciated.
Justin
Edited by: Juhan Kim on Jul 9, 2009 10:53 AM

Hi Justin,
SSO logon not possible; logon tickets not activated on the server
Please check your WAS Profile Parameters in RZ11:
For enabled SSO,WAS should have the possibility to create and accept SSO-Tickets. For that the Profile Parameters should be:
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
Regards,

Similar Messages

An error occurred when connecting to the accounting system ID3DEV310

Hi Friends,
We are Implementing collaboration project 4.5 and want to link with project system in ECC 6.0. Both these are in the different servers.
I have done the configuration on both the servers and also maintain the RFC (ID3DEV310) in Object Links.
When I create or open the existing project I get the following error: "An error occurred when connecting to the accounting system ID3DEV310"
Costing Variant taken is PS01 (Project Planning).
Your reply would be highly appreciated.
Aryan

Hi Deepak,
I have assigned the RFC destination and web server to the object type: "0WBSELEMENT" only
Also the same has been done for define Object links for accounting integration "0FIN_INT_ERP_PS"
I have entered these specific to PS objects only.
Aryan

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Error when connecting to system

Hi,
I have been off topic for quite a while and when I wanted to pick up today, I couldn't connect to the HANA server anymore. I haven't changed any settings since last setup, all I get is the "Error when connecting to system" in the Quick Lauch of the infornation modeler.
Any suggestions?
THX
Markus

Hello,
did you connect since upgrade to SP03?
You might be looking for this thread.
SAP In-Memory Developer Center - planned downtime 2011-11-15, 10-11am PST
Tomas

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

SSL error when connecting in SAP HANA Cloud Portal tutorial

Hi,
I'm going through the tutorial for SAP HANA Cloud Portal - SAP HANA Cloud Portal Developers Tutorial
Unfortuanatelly I have problems with deploying public destinations (page 9).
When I try to deploy the destination for the CRM back from the command console using neo command with relevant parameters and entering my password I get the following error:
ERROR; SSL error when connecting to https://configapi.hanatrial.onedemand.com/configuraiton/api/rest; server certificate might be invalid or untrusted.
Logfiles.
Session log
2014-08-18 15:53:59,579 DEBUG [main] org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager$1: Get connection: HttpRoute[{s}->https://configapi.hanatrial.onedemand.com], timeout = 0 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]] total kept alive: 0, total issued: 0, total allocated: 0 out of 20 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: No free connections [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Available capacity: 2 out of 2 [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:53:59,582 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Creating new connection [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]] 2014-08-18 15:53:59,729 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnectionOperator: Connecting to configapi.hanatrial.onedemand.com/216.128.6.149:443 2014-08-18 15:54:00,035 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnection: Connection closed 2014-08-18 15:54:00,035 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnection: Connection shut down 2014-08-18 15:54:00,036 DEBUG [main] org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager: Released connection is not reusable. 2014-08-18 15:54:00,036 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Releasing connection [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:54:00,037 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Notifying no-one, there are no waiting threads
Console log
2014-08-18 15:53:56,080 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Starting execution of command [get-destination] 2014-08-18 15:53:56,086 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Command [get-destination] init() finished for [1] ms 2014-08-18 15:54:00,038 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Command [get-destination] cleanup() finished for [0] ms 2014-08-18 15:54:00,046 FATAL [main] com.sap.jpaas.infrastructure.console.ConsoleClient: (!) ERROR; SSL error when connecting to https://configapi.hanatrial.onedemand.com/configuration/api/rest; server certificate might be invalid or untrusted com.sap.jpaas.infrastructure.console.exception.ValidationException at com.sap.jpaas.infrastructure.console.command.RemoteCommand.getHttpClient(RemoteCommand.java:97) at com.sap.jpaas.infrastructure.console.command.UnsecuredRemoteCommand.getHttpClient(UnsecuredRemoteCommand.java:57) at com.sap.core.connectivity.config.cmd.ConfigurationConsoleCommand.createHttpClient(ConfigurationConsoleCommand.java:254) at com.sap.core.connectivity.config.cmd.GetAction.download(GetAction.java:79) at com.sap.core.connectivity.config.cmd.GetAction.run(GetAction.java:52) at com.sap.jpaas.infrastructure.console.CommandManager.run(CommandManager.java:295) at com.sap.jpaas.infrastructure.console.CommandManager.run(CommandManager.java:260) at com.sap.jpaas.infrastructure.console.ConsoleClient.run(ConsoleClient.java:235) at com.sap.jpaas.infrastructure.console.ConsoleClient.main(ConsoleClient.java:85) Caused by: com.sap.core.utils.infrastructure.validation.HostValidationException: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated at com.sap.core.utils.infrastructure.validation.LandscapeHostValidator.getHttpClient(LandscapeHostValidator.java:304) at com.sap.jpaas.infrastructure.console.command.RemoteCommand.getHttpClient(RemoteCommand.java:95) ... 8 more Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397) at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128) at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:390) at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:148) at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:149) at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:121) at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:561) at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:415) at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:820) at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:776) at com.sap.core.utils.infrastructure.validation.LandscapeHostValidator.getHttpClient(LandscapeHostValidator.java:284) ... 9 more
BR
Beata

Hi Beata,
The CRM scenario is working again. We had to re install the Connector and deploy a new proxy app.
Therefore you would need to download the code from the GitHub repository again. The changes you need to do on your side:
1. Redeploy the new crm__public destination file - the updated destination now points to the new location of the proxy application
2. Update the code of the registration form scripts (form.js and form.spec.xml).
Regards,
Ido

Error when jumping to the OLTP system

Hi Gurus,
Some data loads are failed, when our BI consultant tries to analyse the issue, he getting the error " error when jumping to the OLTP system " " Screen output without connection to user"
We are using BI and ECC 5.0 as back end system.
Please let us know how to resolve the issu.
Thanks in advance
VJ

Hello,
I have changed user to Dialog user but still the the same issue.
Please guide me how to go ahead.
VJ

Error when connecting to terminal

Hello,
I have a BB 8100, Desktop manager 4.6.
Synchronization was working correctly 3-4 weeks ago.
Today, when I tried to synchronize, I had this error message:
0 x 80040fb3
I tried to debug this with the procedure of modifying Last name, first name, etc.... with no success
I tried several time to synchronize again but without success.
Now, the situation is even worse!
New message when I connect my BB to my computer. When I launch Desktop manager, I have the following error:
"Error when connecting to terminal. Make sure that your terminal is correctly connected, then try again"
I can not anymore try to synchronize!
This is very strange, it never happened before.
Nevertheless, Desktop Manager recognize my BB, as I can read on the buttom left part of the screen: Terminal connected (code Pin) recognized xxxxxx.
HELLLLP!
Thanks
Solved!
Go to Solution.

Hello RianaZaire,
Unfortunately, I still have the same error Message.
I have not been able to solve the situation.
I reinstall twice the software.
I tried to connect my Blackberry to my computer with a new cable.
I still have the same error message.
I don't know what to do.
Maybe somebody will read our messages, and help us!
Maybe this information has a link with my blackberry problem:
I also have a problem with an another device. (a TOMTOM GPS system), which happened almost at the same time.
Usually, when I connect this device, it will directly open the GPS sofware ( where I can download the new updating stuff). But since this Blackberry problem, I can not do it anymore. Impossible to connect the TOMTOM onto it. It is not recognize onto my computer.
For information, I also do synchronization of my adress book between my phone and TOMTOM.
HELP HELP

Error When connecting proxy

Hi,
When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
            System.setProperty("ProxySet", "true");
            SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
            proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
URL u = new URL(url);
URLConnection uu=u.openConnection(ScrapperInterface.proxy);
try
                URI uuu = uu.getURL().toURI();
                List l=ProxySelector.getDefault().select(uuu);
                for (Iterator iter = l.iterator(); iter.hasNext(); )
                     Proxy proxy = (Proxy) iter.next();
                     System.out.println("proxy hostname : " +proxy.type());
                     InetSocketAddress add = (InetSocketAddress)proxy.address();
                     if(add == null)
                         System.out.println("No Proxy");
                     else
                         System.out.println("proxy hostname : " +add.getHostName());
                         System.out.println("proxy port : " +add.getPort());
catch (URISyntaxException ex)
                Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
}Output is:
proxy hostname : DIRECT
No Proxy

Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
What you should be doing here is using the URLConnection you have already created. Not testing an address.

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies

Dear Experts
I am currently facing an issue when I want to connected multiple PI instances to one ECC client for
ABAP Proxy purposes.
In transaction 'SPROXY', in the Enterprise Service Brower, only one PI instance is shown and accessable.
Can this setting be changed to allow multiple PI systems in this Enterprise Service Browser?
Thanks for your ideas.
Mathias

Hi,
Check these replies.
R/3 connected to multiple XI instances
'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies
Multiple XI Instances
Multiple XI instances or multiple app server
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 11:43 AM

"no ocijdbc11 in java.library.path" error when connecting a TNS database co

Hi
"no ocijdbc11 in java.library.path" error when connecting a TNS database connection
I have the same problem 'error code' when testing the connection to a database although I have an APEX db that connects without a problem.
I have re downloaded jre & SQL Developer just to ensure all files are where they should be with no luck.
I've also tried most of the suggestions in various threads.
Does anyone know what exactly causes this error?
eg; should I be looking for a file called 'ocijdbc11' & put it into the 'java.library.path' path?
Can anyone explain to a newbie at db connections what I should do?
I'm using the 'thin' client as the checkbox is clear & I don't know what path to enter into the correct file to make this work??
This is & needs to connect as a TNS connection & was working fine until recently, the only change I can think of is a move of files from the 'C' drive but I thought redownloading SQL Developer would slove this.
Thanks

When you reinstalled SQL Developer, did you install into a new directory (ie rename or delete the old directory first)?
I don't know if system setup contains directory references (which might be invalid after moving the location of SQL Developer). Does renaming your system2.1.1.64.45 directory (in C:\Documents and Settings\username\Application Data\SQL Developer) help? Note that your connections are in the connections.xml file in the o.jdeveloper.db.connection.11.1.1.2.36.55.30 subdirectory of system2.1.1.64.45 - you will either need to export connections before renaming and then import again after or copy this file to test if you can connect.
Finally, the TNS Names directory preference is just a way of telling SQL Developer where to look for the tnsnames.ora file, rather than just assuming it will pick the right one. If you go to create a new connection, do you get the right list of TNS aliases? If not, then set this preference to the directory where the right tnsnames.ora file lives.
theFurryOne

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

Not all car systems are compatible with the iPod touch. Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

IMac 10.6.8, Snow Leopard with iTunes 11.0.1. loss of wifi speed when connecting a Bose Sound System via bluetooth

Hello, I have an iMac 10.6.8, Snow Leopard with iTunes 11.0.1. When connecting my Bose Sound System via bluetooth the wifi downloadspeed goes from snappy to a crawl, disconnecting the bluetooth connection, the downloadspeed goes up again. Don't have this problems with the Sound System when connecting it to my iPad. I like to mention too, that the downloadspeed of my iPad is always better than of my iMac. Are there any experiences concerning this problem? Thank you in advance.

UPDATE - PROBLEM SOLVED!!!!!!
You can thank me later - after an hour on the phone, I finally got through to a Senior Engineer.
Apperently the issues lies with GRID VIEW.
Open your Itunes, Click on TV SHOWS, then quickly change your view from GRID VIEW (Defaults to this) to List View and Viola!
We tested it out on the phone just minutes ago, my problem is solved and I suspect if you guys try this yours will be too.

Error when connecting to MDM from different lan

Hi,
I got "Image Server Login Error" when connecting with client to server from different LAN, server is up, and i can connect to it when i in the same LAN. Ports 20003, 20004, 20005 for MDM server discovering and repository port 2345 is accessible through router. Running SP2 5.5.24.06.
Rem: it's not a port problem, when port 2345 is closed i got "WinSock error on connect"
PS: When I used MDM SP1 i connected to him properly in the same case.

Hi Dmitry,
If your repository is set to port 2345, then 4 subsequent ports should be openned also, i.e. 2346-2349.
Regards, Lev

Error when connecting Portal to ECC system

Similar Messages

Maybe you are looking for