Error when Copying and Changing Area Menu S000
Hi Guys,
I have copied the area menu S000 to Z000 and I have been able to add my own menus there. However, there are some unnecesary menus on that area menu and I am trying to remove them. I have been able to remove the children of these menus, but am not able to remove the roots. Whenever I try to remove them, it gives the error:
"Delete only nodes with enhancement ID '' (node ID:'CAMPUS')", for example.
The menu items are:
Student Lifecycle Management,Hospital, Clinical System, Insurance, Telecommunications, and Utilities Industry.
Also, the added menus are put at the top of the area menu, is there a way of putting them at the bottom?
Regards
HI - I too have the same / similar problem. I have copied S000 to Z000 ... but now if I set Z000 as default menu then it shows Hospital and Campus Management etc. But these dont show when using S000.
I either need to prevent them showing (in the same way as they dont show in S000) or delete them from Z000 but deleting them is also a problem for me becuase of the error message described above "Delete only nodes with enhancement ID"
Any ideas appreciated
Thx
Similar Messages
-
Keep receiving error when trying to change device on my verizon. Unfortunately, none of the lines on your account are eligible to receive the Online Authorization Code.
Unable to change device on account.That would be great if they weren't 2 different size SIM cards.
The code is a security feature and I realize this. It is to prevent someone from hacking your account and changing your devices without your knowledge. However, I am the account owner and I know exactly what is going on with my account at all times. I check data usage AT LEAST 2 times daily and I log into my account at least once daily. I would very quickly discover any issues. This feature is more of a (removed)
Edited as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator -
My keyboard loses functionality when I try to leave comments on Facebook.
Delete, backspace, apostrophe and cut, copy and paste are disabled. This only happens in comments, no functionality is lost in messaging or status updates.
I have disabled all my add-ons and restarted Firefox and the issue persists. I have updated add-ons, restarted Firefox and the issue persists.
I have updated Firefox and that made no difference.
I have cleared cookies and cache and still no luck.
SOLUTION: I disabled the Grammarly Lite add-on and this seems to have resolved the issue.
I have informed Facebook of the issue. I cannot find any information about this problem in Facebook's troubleshooting.
I cannot replicate this issue in Internet Explorer. All the functions work fine.
I have the same issue on a different device that runs Windows 7 Starter and on a laptop that runs Windows 8.1.Hello oysterchick, see a similar report :
https://addons.mozilla.org/en-us/firefox/addon/grammarly/reviews/587040/
thank you -
I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?
DavidThis is a duplicate thread - see here
-
Error when inserting or changing in a sorted table
Hi Experts,
When i am executing a webdynpro application it says Error when inserting or changing in a sorted table. Can any one help for this.
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_COMPONENTCONTROLLER~GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
in ST22
Object Definition
DATA: lo_node TYPE REF TO if_wd_context_node,
lo_node_info TYPE REF TO if_wd_context_node_info,
lo_element TYPE REF TO if_wd_context_element.
Additional Data declarations
DATA: lv_key TYPE string.
Get context node.
lo_node = wd_context->get_child_node( name = 'DROPDOWNLISTS' ).
lo_node_info = lo_node->get_node_info( ).
Call method to fetch the categories.
CALL METHOD cl_hap_wd_start_page_ui=>category_get_list
EXPORTING
add_on_application = add_on_application
IMPORTING
t_categories = lt_categories.
Append Default selection entry 'All'.
lw_category-category_id = '00000000'.
lw_category-category_name = 'All'.
APPEND lw_category TO lt_categories.
Sort table after appending the new entry.
SORT lt_categories ASCENDING.
Loop through the category list and populate key(category_id) value(category_name) pair for
LOOP AT lt_categories INTO lw_category.
lw_key_value-key = lw_category-category_id.
625 lw_key_value-value = lw_category-category_name.
>>>>> APPEND lw_key_value TO lt_key_values.------>Here it throws an error
627 CLEAR: lw_key_value, lw_category.
628 ENDLOOP.
629
630 * Bind the category key-value pair to the context attribute.
631 CALL METHOD lo_node_info->set_attribute_value_set
632 EXPORTING
633 name = 'CATEGORY_LIST'
634 value_set = lt_key_values.
635
636 * Make the entry 'All' as default selected.
637 CALL METHOD lo_node->set_attribute
638 EXPORTING
639 value = '00000000'
640 name = 'CATEGORY_LIST'.
641
642 ENDMETHOD.
643
644 method GET_EMPLOYEES.
645Hello Durga,
from the error what I understood is lt_key_values is a sorted table and you are trying append a new line to it. Incase of sorted table you need to use the INSERT statement and not the APPEND statement.
INSERT lw_key_value INTO table lt_key_values.
BR, Saravanan -
Black page when copying and scanning
Hi,
I have a HP Laserjet 1536dnf MFP, all was working fine until I changed the ink cartridge two days ago. Printing is fine but when I go to copy or scan I get a solid black page printed. I've checked the light goes across when copying and scanning, tried switching off printer and on again, plugged it straight in to wall and updated all HP software. Any ideas?
Many thanks
DaniHi @Dani77 ,
I see by your post that you are getting a black page when copying and scanning from the printer. You can print fine and you updated the HP software, the printer is connected directly to a wall outlet and you have the same results.
I would really like to be able to help you resolve this issue.
I wasn't sure whether you just updated the printer software on the printer or the firmware.
If you haven't already, please update the printer's firmware. HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
Disconnect the USB or Ethernet cable from the printer.
Make sure the printer is still connected directly to a 3 prong wall outlet.
Try making a copy with a blank sheet.
If the output is blank, then try and copy a text document.
I will send you another step to try in a private message.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet)
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
System error: Error when copying parameter function group CR01
Dear friends
I am getting the above error while doing the Backflushing in REM.
It occurs when backflushed quantity is issued ,and while confirming the
ACTUAL ACTIVITES above error occurs..........
We have upgrade the system from SAP 4.7 to ECC6.0.
It is giving some error in CRM system but we don't have CRM system.......
Message displayed is as below..................
System error: Error when copying parameter function group CR01
Message no. CR085
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your ERP
System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the
error cannot be corrected, call the SAP Hotline directly. Describe which
steps preceeded the error.
Thanks& Regards
Sandeep
Message was edited by:
Sandeep BhowmickHi Sandeep
Standard R/3 does not allow backflush without any operation. You need to have an operation to do a backflush.Error message CR 085 is issued because there is no operation in the routing of the material backflushed. System should issue an error when no operations are found in routing. Although, error message CR 085 is not correct, more appropriate message RM 824 for this a program correction is requried check note (691161).
Regards
Prasad
Reward if useful -
'Blank user name' error when trying to change email password
My password on our mail server changed, when I tried to change the password on my Storm 9500 I get 'Blank user name' error when trying to change, but I have typed in a user name!!!!
BLOODY frustrating because now I am not receiving any mails at all, so my business out of the office has come to a standstill!!!!
Vicky
Solved!
Go to Solution.Try changing the email password on your PC, if you are having problems doing so from your device.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Error when copying update rules!!!
Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNKHi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK -
C5280 prints black page when copying and scanning
Can anybody help please.
C5280 prints a black page when I want to copy or scan but it prints ok from the computer. The light seems to be working on it. I am unable to reinstall with the disc as the CD drive is not working now. Does it need to be reinstalled.
Thanks for any help possible.Hi @Dani77 ,
I see by your post that you are getting a black page when copying and scanning from the printer. You can print fine and you updated the HP software, the printer is connected directly to a wall outlet and you have the same results.
I would really like to be able to help you resolve this issue.
I wasn't sure whether you just updated the printer software on the printer or the firmware.
If you haven't already, please update the printer's firmware. HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
Disconnect the USB or Ethernet cable from the printer.
Make sure the printer is still connected directly to a 3 prong wall outlet.
Try making a copy with a blank sheet.
If the output is blank, then try and copy a text document.
I will send you another step to try in a private message.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet)
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
FM 10 - Serious Internal Error When Copying/Pasting
We regularly encounter a serious internal error when copying text from one FM doc to another. We also get the error (occasionally) when we run FrameScript. Does anyone know what could cause this? It appears to happen randomly (i.e. it doesn't appear to be tied to one particular .book or .fm file). We use FM 10, Windows 7, 64-bit OS, and have 4GB of RAM installed. Help please!
We have version 10.0.2.419. There is nothing out of the ordinary with the content except that it is typically in track text edits. We cannot reproduce the crash on demand. It seems to happen randomly and to some users more than others.
-
Demo Error when creating or changing configuration objects
Hi All,
I am trying to "Generate the Configuration Objects" for Demo: CheckFlightAvailability.
But in the GenerationLog I got the error under "Generation Statistic" saying that "Error when creating or changing configuration objects".
I can any one tell me what went wrong?
Regards,
Nagarjuna.Did you ever solve this issue? We are experiencing the same errors, but with ZCM 11. Server configurstion is Windows Server 2008R2, database is MS SQL 2005.
Every time we try to create or change a (Windows) bundle or policy there's an error message in ZCC. The error is:
com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: org.hibernate.exception.ConstraintViolationExcepti on: could not insert collection: [com.novell.zenworks.datamodel.objects.assignableco ntent.AssignableContentObject.ContentServers
...followed by a different GUID(?) every time.
We've placed a SR but haven't had any suggestions from Novell yet - we're soon going from calm to panic as we are planning to move from test to production in two weeks...
Cheers,
Peter -
Error when login and authorizing my new computor
error when login and authorizing my new computor
Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever. -
Premiere Pro CC(2014) crashing when copying and pasting clips
Has anyone found Premiere to hang when copy and pasting clips from one sequence to another, or even within the same sequence.
Sometimes, it hangs then comes back to life. Other time I just have to force quit.
ThanksI don't recall reports of such a problem. We'll need more info to attempt to troubleshoot the issue. Start with the prompts on this page: FAQ: What information should I provide when asking a question on this forum? Especially the details on your computer.
Also, please report the following:
the types of content in your sequence, particularly in segments you're pasting. The source(s) of the content, the codec(s), the duration of copied segments?
where the content is stored?
whether either sequence was imported from a third-party program via XML or the like?
the sequence settings of both sequences?
what effects & transitions are in use, particularly in the segments you're pasting?
what is resource usage before and during the copy/paste operation? Is a CPU getting pegged? Does memory usage spike precipitously? -
Error when ECO and BOM creation using IDoc
Hi experts,
now i am doing an interface about ECO/BOM creation and changing using IDoc.The idoc type is ECMMAS02 ans BOMMAT04.
since i know a little about ECO/BOM, can anyone provide some good materials for me?
and i don't know which fields are mandatory in idoc segment, so i go to tansaction BD30 to run a BOM changing. i input a change number but the idoc log shows that change number does not exist. what is the change number using? where i can implement the changes, e.g, change the quantity? should the change number be used when creation and changing? how can i get this change number?
thanks a lot in advance!Hi experts,
now i am doing an interface about ECO/BOM creation and changing using IDoc.The idoc type is ECMMAS02 ans BOMMAT04.
since i know a little about ECO/BOM, can anyone provide some good materials for me?
and i don't know which fields are mandatory in idoc segment, so i go to tansaction BD30 to run a BOM changing. i input a change number but the idoc log shows that change number does not exist. what is the change number using? where i can implement the changes, e.g, change the quantity? should the change number be used when creation and changing? how can i get this change number?
thanks a lot in advance!
Maybe you are looking for
-
Adobe Flash Player - Uninstall problem
I have a new HP Pavilion f0010 laptop. Was having problems with videos being "green". Did some online researching and somehow accidentally uninstalled Adobe Flash Player from control panel. How do I reinstall this to original installation? Thanks
-
Why my apps can't be installed.
First: my english is bad, so I hope you can understand just a little bit. Well, I purchased an iPhone 3gS and today i tried to install some apps. Everything was ok but when I sync with the phone and when says that "the app is successfully installed"
-
PLEASE Help on two network cards in server
Hi all, (Sorry my spelling Im danish) We have a 10.4.5 server with 2 network cards in it. How does I get the server to route betwin the two networks so that mac's on net 1 (en0) can see mac's and printers on net 2 (en1) and visa versa The mac's on ne
-
Ichat screen share: a way to limit to screen watching, not control?
hi - using Snow Leopard 10.6.8 on Workstations; is there a way to limit the screen share option so invited chat members can only observe the live screen of another member, as opposed to also having control of the other member's desktop?
-
Which channel do i use on my airport express
what is the best channel for my airport express?