Error when copying files from SSD to HD

Build 9926 (clean install not upgrade)
When copying file (drag & drop) from either an SSD>> HD or HD>>SSD I get the below error. This is definetly build specific and not hardware related. I have re-installed 9926 from an MSDN ISO 3x with the same results.
Both drives are local. Both drives have been checked and are ok.
Any ideas?

Hi Dyamixx,
Please consider to run process monitor to further look at this issue:
Troubleshooting with Process Monitor
After that, please upload the trace into OneDrive and then post the shared link here.
Best regards
Michael Shao
TechNet Community Support

Similar Messages

! Error when copying song from Purchased to IPod play list. How to fix?

! Error when copying song from Purchased to IPod play list. How to fix?

Hi
Try the iPod for windows forum http://discussions.apple.com/forum.jspa?forumID=826
Tony

Retaining date/time stamp when copying files from a backup network drive

How do I retain the date/time stamp when copying files from a backup such as a external drive or a network drive?

i don't trust MA at all. known to create a lot of problems.
instead, see the green box in this user tip.

Error-36 and Error-42 when copying files from SD card

Hello!
I recently switched from a PC user to a mac user! Everything is great, but ever since I got the computer (refurbished 15in macbook pro) ive had problems with copying files from my SD card to my computer!! It so frustrating! Ive tried everything! I even called apple support, and after 30 minutes of calling came to no solution! I keep getting error-36 error-43 and sometimes error-8058 !!! I tried formatting with no success, because my computer cant read the disk! It is a PNY professtional 32gb sd card. Im not sure if this problem is happening due to the fact that I previousley used this same SD on my PC, but im going to return this computer if it doesnt fix! Ive also tried doing to terminal commands but it doesn't work! Please help!!
- from a distressed youtuber

I'm having similar problems and I'm using a 1Tb HDD ( USB connection) which has 3 partitions. I have discovered that after some time (not clear what triggers it) I start being unable to use one partition for backups. When I checked further I discovered that I cannot write any file no matter what size to it. The problem has normally disappeared for a while when I restart my computer. I've done disk verifies and things are fine. The other two partitions are Ok ... I use one for TimeMachine and the other for SuperDuper. This partition is primarily used for ChronoSync backups so I suspect that the problem is related to how ChronoSync backs up but I have yet to convince their tech support of that.

External Hard drive getting errors when copying files?

When I'm copying files to my hard drive I keep getting errors that the file is in use. It was originally stopping at around the 167.8MB mark everytime when I try copying files over and giving me that error. As this is a 1TB HDD I have no way of backing it up until I get to the US (currently studying in Australia). So just wondering if anyone had ideas.
Things I've done:
- Tried using HDD over Firewire/USB and with other Macs still same errors
- Tried Disk Utility and sometimes it I get no errors with the disk when I do Repair/Verify Disk or I get an error where the disk can't be unmounted
- I get that error of unmounting when I normally unmount them and I have to unplug the HDD for it to be readable again.
- I try copying files from it or to it, and sometimes files copy to my Computer entirely even 2GB ones, but other times it stops at random intervals, and it always stops when copying files to the HDD that never works, usually stops at random times. :\
Any suggestions, help, or programs I can use for HDD repair would be great!
Thanks a lot,
godzillafan8686

Wondering if I could bump this up a bit, still having problems with it.

Time Capsule: "Network name no longer available" error when copying files

Hi!
I've come upon this error when trying to copy files from my PC to Time Capsule:
"Network name no longer available".
This seems to happen only on folders that have image sequences in them (.sgi image sequences).
I was planning on transferring the content of my PCs hard drive to Time-Machine in order to smooth out the migration from my old PC to my new MBP but I have to say that I'm a little less confident about using TC as a storage space for my valuable files.
Is there a work around for this? I have tons of folders with .sgi image sequences and it would be a real shame not to be able to transfer them to Time Capsule.
Please help!

Hi… I don’t think there should be any such limitation for the file transfer wirelessly. However it can be issue, as you wired is connect at a speed of 100 Mbps and wireless connects to the max at 54 Mbps. Try to upgrade the firmware. Also try reducing Fragmentation Threshold and RTS threshold by 40 each under advance wireless settings on the router. Go to www.speedguide.net, and download the TCP optimizer. Try reducing the MTU of your wireless adapter. Please Revert Back, even if this resolves your issue.

CPU Jul-09 Installation - Error Cannot copy file from 'libjox10.so' to

Hi All, I received this error while I was installing the last CPU on a 10.2.0.4 Oracle Instance running on a HP-UX Itanium System:
Patch 8568398:
Copy Action: Desctination File "/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writeable.
'oracle.rdbms, 10.2.0.4.0': Cannot copy file from 'libjox10.so' to '/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'
I checked metalink' site with no similar results found.
Could anybody help me?
Should I run /usr/sbin/slibclean and remove the last patch (Patch 8568398) and then try again?
This is the complete log...
$ opatch version
Invoking OPatch 10.2.0.4.7
OPatch Version: 10.2.0.4.7
OPatch succeeded.
$ sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Jul 17 16:29:29 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
$ lsnrctl stop
LSNRCTL for HPUX: Version 10.2.0.4.0 - Production on 17-JUL-2009 16:32:29
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=Hostname)(PORT=1521)))
The command completed successfully
$ emctl stop dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://hostname:1158/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
... Stopped.
$unzip p8534387_10204_HPUX-IA64.zip
<...>
$ cd 8534387
$ opatch napply -skip_subset -skip_duplicate
Invoking OPatch 10.2.0.4.7
Oracle Interim Patch Installer version 10.2.0.4.7
Copyright (c) 2009, Oracle Corporation. All rights reserved.
UTIL session
Oracle Home : /u02/app/oracle/product/10.2/Db_1
Central Inventory : /u02/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.4.7
OUI version : 10.2.0.4.0
OUI location : /u02/app/oracle/product/10.2/Db_1/oui
Log file location : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2 009-07-17_16-38-05PM.log
Patch history file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_ history.txt
Invoking utility "napply"
Checking conflict among patches...
Checking if Oracle Home has components required by patches...
Checking skip_duplicate
Checking skip_subset
Checking conflicts against Oracle Home...
OPatch continues with these patches: 7155248 7155249 7155250 7155251 7155252 7155253 7155254 7197583 7375611 7375613 7375617 7609057 7609058 8309587 8309592 8309623 8309632 8309637 8309642 8534387 8568395 8568397 8568398 8568402 8568404 8568405
Do you want to proceed? y
y
User Responded with: Y
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 8568398:
Copy Action: Desctination File "/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writeable.
'oracle.rdbms, 10.2.0.4.0': Cannot copy file from 'libjox10.so' to '/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'
UtilSession failed: Prerequisite check "CheckApplicable" failed.
$ opatch lsinventory -detail
Invoking OPatch 10.2.0.4.7
Oracle Interim Patch Installer version 10.2.0.4.7
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : /u02/app/oracle/product/10.2/Db_1
Central Inventory : /u02/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.4.7
OUI version : 10.2.0.4.0
OUI location : /u02/app/oracle/product/10.2/Db_1/oui
Log file location : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log
Patch history file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt
Lsinventory Output file location : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/lsinv/lsinventory2009-07-17_17-53-30PM.txt
Installed Top-level Products (2):
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
There are 2 products installed in this Oracle Home.
Installed Products (190):
Agent Required Support Files 10.2.0.1.0
Agent Required Support Files Patch 10.2.0.4.0
Assistant Common Files 10.2.0.1.0
Assistant Common Files Patch 10.2.0.4.0
Bali Share 1.1.18.0.0
Buildtools Common Files 10.2.0.1.0
Character Set Migration Utility 10.2.0.1.0
Character Set Migration Utility Patch 10.2.0.4.0
Database Configuration and Upgrade Assistants 10.2.0.1.0
Database Configuration and Upgrade Assistants Patch 10.2.0.4.0
Database SQL Scripts 10.2.0.1.0
Database SQL Scripts Patch 10.2.0.4.0
Database Workspace Manager 10.2.0.1.0
Database Workspace Manager 10.2.0.4.0
DBJAVA Required Support Files 10.2.0.1.0
DBJAVA Required Support Files Patch 10.2.0.4.0
Enterprise Edition Options 10.2.0.1.0
Enterprise Manager Agent Core 10.2.0.1.0
Enterprise Manager Agent Core Patch 10.2.0.4.0a
Enterprise Manager Agent DB 10.2.0.1.0
Enterprise Manager Agent DB 10.2.0.4.0
Enterprise Manager Baseline 10.2.0.1.0
Enterprise Manager Baseline 10.2.0.4.0
Enterprise Manager Common Core Patch 10.2.0.4.0a
Enterprise Manager Common Files 10.2.0.1.0
Enterprise Manager Minimal Integration 10.2.0.1.0
Enterprise Manager plugin Common Files 10.2.0.1.0
Enterprise Manager plugin Common Files 10.2.0.1.0
Enterprise Manager plugin Common Files Patch 10.2.0.4.0
Enterprise Manager Repository Core 10.2.0.1.0
Enterprise Manager Repository Core patch 10.2.0.4.0a
Enterprise Manager Repository DB 10.2.0.1.0
Enterprise Manager Repository DB 10.2.0.4.0
Generic Connectivity Common Files 10.2.0.1.0
Generic Connectivity Common Files Patch 10.2.0.4.0
HAS Common Files 10.2.0.1.0
HAS Common Files Patch 10.2.0.4.0
HAS Files for DB 10.2.0.1.0
HAS Files for DB Patch 10.2.0.4.0
Installation Common Files 10.2.0.1.0
Installation Common Files Patch 10.2.0.4.0
Installer SDK Component 10.2.0.4.0
iSQL*Plus 10.2.0.1.0
iSQL*Plus 10.2.0.4.0
Java Runtime Environment 1.4.2.14.0
JDBC Common Files 10.2.0.1.0
JDBC Common Files 10.2.0.4.0
LDAP Required Support Files 10.2.0.1.0
LDAP Required Support Files Patch 10.2.0.4.0
OLAP SQL Scripts 10.2.0.1.0
OLAP SQL Scripts Patch 10.2.0.4.0
Oracle Advanced Security 10.2.0.1.0
Oracle Advanced Security Patch 10.2.0.4.0
Oracle Call Interface (OCI) 10.2.0.1.0
Oracle Call Interface (OCI) Patch 10.2.0.4.0
Oracle Clusterware RDBMS Files 10.2.0.1.0
Oracle Clusterware RDBMS Files Patch 10.2.0.4.0
Oracle Code Editor 1.2.1.0.0I
Oracle Configuration Manager 10.2.7.1.0
Oracle Containers for Java 10.2.0.1.0
Oracle Containers for Java 10.2.0.4.0
Oracle Core Required Support Files 10.2.0.1.0
Oracle Core Required Support Files Patch 10.2.0.4.0
Oracle Data Mining RDBMS Files 10.2.0.1.0
Oracle Data Mining RDBMS Files Patch 10.2.0.4.0
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g 10.2.0.1.0
Oracle Database 10G 32 bit 10.1.0.2.0
Oracle Database 10g interMedia Files 10.2.0.1.0
Oracle Database 10g interMedia Files Patch 10.2.0.4.0
Oracle Database 10g Patch 10.2.0.4.0
Oracle Database 10g Patch 10.2.0.4.0
Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
Oracle Database User Interface 2.2.13.0.0
Oracle Database Utilities 10.2.0.1.0
Oracle Database Utilities Patch 10.2.0.4.0
Oracle Display Fonts 9.0.2.0.0
Oracle Enterprise Manager Console DB 10.2.0.1.0
Oracle Enterprise Manager Console DB 10.2.0.4.0
Oracle Extended Windowing Toolkit 3.4.38.0.0
Oracle Globalization Support 10.2.0.1.0
Oracle Globalization Support Patch 10.2.0.4.0
Oracle Help For Java 4.2.6.1.0
Oracle Help for the Web 1.1.10.0.0
Oracle Ice Browser 5.2.3.6.0
Oracle interMedia 10.2.0.1.0
Oracle interMedia Annotator 10.2.0.1.0
Oracle interMedia Client Option 10.2.0.1.0
Oracle interMedia Client Option Patch 10.2.0.4.0
Oracle interMedia Java Advanced Imaging 10.2.0.1.0
Oracle interMedia Java Advanced Imaging Patch 10.2.0.4.0
Oracle interMedia Locator 10.2.0.1.0
Oracle interMedia Locator Patch 10.2.0.4.0
Oracle interMedia Locator RDBMS Files 10.2.0.1.0
Oracle interMedia Locator RDBMS Files Patch 10.2.0.4.0
Oracle interMedia Patch 10.2.0.4.0
Oracle Internet Directory Client 10.2.0.1.0
Oracle Internet Directory Client Patch 10.2.0.4.0
Oracle Java Client 10.2.0.1.0
Oracle Java Client Patch 10.2.0.4.0
Oracle JDBC Thin Driver for JDK 1.2 10.2.0.1.0
Oracle JDBC Thin Driver for JDK 1.2 Patch 10.2.0.4.0
Oracle JDBC Thin Driver for JDK 1.4 10.2.0.1.0
Oracle JDBC Thin Driver for JDK 1.4 Patch 10.2.0.4.0
Oracle JDBC/OCI Instant Client 10.2.0.1.0
Oracle JDBC/OCI Instant Client Patch 10.2.0.4.0
Oracle JFC Extended Windowing Toolkit 4.2.33.0.0
Oracle JVM 10.2.0.1.0
Oracle JVM Patch 10.2.0.4.0
Oracle LDAP administration 10.2.0.1.0
Oracle LDAP administration patch 10.2.0.4.0
Oracle Locale Builder 10.2.0.1.0
Oracle Message Gateway Common Files 10.2.0.1.0
Oracle Message Gateway Common Files Patch 10.2.0.4.0
Oracle Net 10.2.0.1.0
Oracle Net Listener 10.2.0.1.0
Oracle Net Listener Patch 10.2.0.4.0
Oracle Net Patch 10.2.0.4.0
Oracle Net Required Support Files 10.2.0.1.0
Oracle Net Required Support Files Patch 10.2.0.4.0
Oracle Net Services 10.2.0.1.0
Oracle Notification Service 9.0.4.0.0
Oracle Notification Service Patch 10.2.0.4.0
Oracle OLAP 10.2.0.1.0
Oracle OLAP API 10.2.0.1.0
Oracle OLAP API Patch 10.2.0.4.0
Oracle OLAP Patch 10.2.0.4.0
Oracle OLAP RDBMS Files 10.2.0.1.0
Oracle OLAP RDBMS Files Patch 10.2.0.4.0
Oracle One-Off Patch Installer 10.2.0.4.0
Oracle Partitioning 10.2.0.1.0
Oracle Partitioning Patch 10.2.0.4.0
Oracle Programmer 10.2.0.1.0
Oracle RAC Required Support Files-HAS 10.2.0.1.0
Oracle RAC Required Support Files-HAS Patch 10.2.0.4.0
Oracle Real Application Testing 10.2.0.4.0
Oracle Recovery Manager 10.2.0.1.0
Oracle Recovery Manager Patch 10.2.0.4.0
Oracle Required Support Files 32 bit 10.2.0.0.0
Oracle Required Support Files 32 bit Patch 10.2.0.4.0
Oracle Spatial 10.2.0.1.0
Oracle Starter Database 10.2.0.1.0
Oracle Starter Database Patch 10.2.0.4.0
Oracle Text 10.2.0.1.0
Oracle Text Patch 10.2.0.4.0
Oracle UIX 2.1.22.0.0
Oracle Universal Installer 10.2.0.4.0
Oracle Wallet Manager 10.2.0.1.0
Oracle Wallet Manager Patch 10.2.0.4.0
Oracle XML Development Kit 10.2.0.1.0
Oracle XML Development Kit Patch 10.2.0.4.0
Parser Generator Required Support Files 10.2.0.1.0
Perl Interpreter 5.8.3.0.1
Perl Interpreter Patch 5.8.3.0.1a
PL/SQL 10.2.0.1.0
PL/SQL 10.2.0.4.0
PL/SQL Embedded Gateway 10.2.0.1.0
PL/SQL Embedded Gateway Patch 10.2.0.4.0
Platform Required Support Files 10.2.0.1.0
Platform Required Support Files 10.2.0.4.0
Precompiler Common Files 10.2.0.1.0
Precompiler Common Files Patch 10.2.0.4.0
Precompiler Required Support Files 10.2.0.1.0
Precompiler Required Support Files Patch 10.2.0.4.0
RDBMS Required Support Files 10.2.0.1.0
RDBMS Required Support Files for Instant Client 10.2.0.1.0
RDBMS Required Support Files for Instant Client Patch 10.2.0.4.0
RDBMS Required Support Files Patch 10.2.0.4.0
regexp 2.1.9.0.0
Required Support Files 10.2.0.1.0
Sample Schema Data 10.2.0.1.0
Sample Schema Data Patch 10.2.0.4.0
Secure Socket Layer 10.2.0.1.0
Secure Socket Layer Patch 10.2.0.4.0
SQL*Plus 10.2.0.1.0
SQL*Plus 10.2.0.4.0
SQL*Plus Required Support Files 10.2.0.1.0
SQL*Plus Required Support Files Patch 10.2.0.4.0
SQLJ Runtime 10.2.0.1.0
SQLJ Runtime Patch 10.2.0.4.0
SSL Required Support Files for InstantClient 10.2.0.1.0
SSL Required Support Files for InstantClient Patch 10.2.0.4.0
Sun JDK 1.4.2.17.0
Sun JDK extensions 9.2.0.1.0
XDK Required Support Files 10.2.0.1.0
XDK Required Support Files Patch 10.2.0.4.0
XML Parser for Java 10.2.0.1.0
XML Parser for Java Patch 10.2.0.4.0
XML Parser for Oracle JVM 10.2.0.1.0
XML Parser for Oracle JVM Patch 10.2.0.4.0
There are 190 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
$
$ more /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt
Date & Time : Fri Jul 17 16:02:17 GMT-03:00 2009
Oracle Home : /u02/app/oracle/product/10.2/Db_1
OPatch Ver. : 10.2.0.4.7
Current Dir : /u02/app/oracle/product/10.2/Db_1
Command : -v
Log File : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-02-17PM.log
Date & Time : Fri Jul 17 16:38:05 GMT-03:00 2009
Oracle Home : /u02/app/oracle/product/10.2/Db_1
OPatch Ver. : 10.2.0.4.7
Current Dir : /home/ora10g/8534387
Command : napply -skip_subset -skip_duplicate
Log File : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-38-05PM.log
Date & Time : Fri Jul 17 17:53:30 GMT-03:00 2009
Oracle Home : /u02/app/oracle/product/10.2/Db_1
OPatch Ver. : 10.2.0.4.7
Current Dir : /home/ora10g/8534387
Command : lsinventory -detail
Log File : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log
$
Please let me know if you need more info.
Regards, and thanks in advance!
Martin

You were right. It was a permissions issue:
hostname:/root# ls -ltr /u02/app/oracle/product/10.2/Db_1/lib/libjox10.so
-r-xr-xr-x 1 ora10g oinstall 20041728 Apr 23 2008 /u02/app/oracle/product/10.2/Db_1/lib/libjox10.so
Thanks.
damorgan wrote:
"is not writeable." means one of two things.
1. It does not exist.
2. Permissions are not set correctly.
Determining which it is ... that is the first step.

Error when exporting file from LR5.2 - file created

After updating to LR5.2, I receive an error when exporting files to another disk drive. a file is created, but a warning appears "Unable to Export: "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute". I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application. I tried removing the program and reinstalling through CC, with no change in this behavior.

The answer is in the thread:
http://forums.adobe.com/thread/1303578?tstart=0

Error when copying files to NAS

Since upgrading to Mavericks, I frequently get errors in the Finder when copying files to my NAS.
This never happened under Mountain Lion. The error says "The operation can’t be completed because the item “filename” is in use."
Most of the time, it does copy over after several attempts. I'd like to know if there is a fix for this, or an update in the works.
I'm currently on 10.9.
Thanks!

...Just FYI my problem occured even though I had updated to 10.9.2.
Through trial and error I eventually got my files copied. I detailed what I ended up doing in my post which I referred to above: ( https://discussions.apple.com/thread/5944278 )
Tx..

Time capsule crash when copying files from it

Hi, I'm trying to copy files from a time capsule to a windows 7 pc. When I do that the time capsule crashes. I can copy files from the windows 7 pc to the time capsule without problems. Has anybody got a clue? I just bought the time capsule, so it has the latest versions.

What do you see that you interpret as a Time Capsule crash? You can use AirPort Utility to look at the log file of the Time Capsule. Go into "Manual Setup", then invoke Base Station > Logs and Statistics. There might be a message in the log that helps explain the problem.

Error when copying file under Cisco vpn client 5 x64

Hello Everyone,
My network scenario:
INTERNET<--->LoadBalacing( 2 Line) <---> Cisco ASA 5510<--> LAN
In Load Balancing i configured NAT port 500 and 10000 to Cisco ASA 5510 . On my laptop running windows 7 x64, i setup the vpn client v5 x64 and successfully connect to cisco ASA , I can copy file <1MB via VPN connection but have an trouble when copy file about more than 1MB
After the error occur, i checked the VPN Client status and it is connected .
Could you please help !!!!
I appreciate all your answer .
Thanks so much

No one know the error ?

Utl_file gives error when coping file from windows to linux

Red Hat Enterprise Linux Server release 5.7 (Tikanga)
Oracle 11.1
Hi there,
I can't copy a file with utl_file.fcopy after copying file with samba from winodws to linux. Only after I open the file on linux and save it, can I copy it :
1.) Copy file from windows (drag and drop)
2.)
SQL> exec utl_file.fcopy('XXMS_DATA_IMPORTS', 'Project_62.csv','XXMS_DATA_IMPORTS', 'xxms_pa_tasks_master.csv');
BEGIN utl_file.fcopy('XXMS_DATA_IMPORTS', 'Project_62.csv','XXMS_DATA_IMPORTS', 'xxms_pa_tasks_master.csv'); END;
ERROR at line 1:
ORA-29284: file read error
ORA-06512: at "SYS.UTL_FILE", line 270
ORA-06512: at "SYS.UTL_FILE", line 1243
ORA-06512: at line 1
3.)su to root
4.)open file and save it with vi, without changing anything
5.)
SQL> exec utl_file.fcopy('XXMS_DATA_IMPORTS', 'Project_62.csv','XXMS_DATA_IMPORTS', 'xxms_pa_tasks_master.csv');
PL/SQL procedure successfully completed.
How can I copy from windows to linux with samba, so this doesn't happen?
Please help

After the file is initially created in Linux:
What are the owner and group for the directory in which the file resides?
What are the directory permissions?
What are the owner and group for the file?
What are the file permissions?
What is the OS name of the oracle user?
After root vi's and resaves the file:
What are the owner and group for the file?
What are the file permissions?

-36 error when copying files

I'm trying to copy files to an OSX server (v.10.4.11) and often get -36 errors. What does this code mean and how can I solve this issue?
I tried copying from Windows and other 10.4 computers and it seems to work, but when I copy from OS10.5 clients, I always get this error message.
Is there a list of error codes I can find somewhere in the support section? I find this rather cryptic for an OS known for its user friendliness.

Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command). Rebuild it to the Pictures Folder. This might overcome the -36 issue.
(This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.)
Failing that you're into recovering your Originals from the damaged Library and creating a new Library and starting over from scratch.
Regards
TD

Errors when copying files to external HDs

I'm going to try to make this as uncomplicated as possible, so please bear with me.
I have two WD Elements external HDs. I use a Belkin powered 2-port USB hub to connect them to my Airport Extreme (used as a server). I started out with one of them, a 1.5 TB, and purchased the second one when the first started to get really full. I use them exclusively for storing music files. My plan was to move files from the nearly full drive to the new one. I began moving files, folder by folder (a painstaking and time-consuming process) from the one drive to the other.
The first problem that popped up was this: in the process of copying a folder to the new drive, an error message appeared saying that the "operation could not be completed because you do not have access to some of the items." I in fact have full custom access to both drives, and am the only one who uses them. Another message I would sometimes get would be, "[file name] could not be moved because its name contains too many characters."
I found this annoying but bearable until it started happening more frequently. What's more, when a folder failed to copy completely, that would leave me with an identically named but incomplete folder in the second location. An attempt to delete it would be met by another error message, "[folder name] could not be deleted because [folder or file name] is in use.
I hope this is all clear enough. Any help would be appreciated.

Simplify the system. You have a lot of components right now and it is hard to know where the error lies. If this is a one-time major transfer of files personally I could connect them directly to the computer, get it done, then reconnect to the spaghetti of wi-fi, hubs, etc..
What format drives? Are you really running a server with intervening firmware or software, or are these simply external drives?

Parameter Error when Transferring Files from ipod to laptop

Hi,
I have posted this topic previously but didnt respond fast enough and I think the system locked it down as I had too long of a delay.
I have recently set up iTunes on a laptop and want to start using this as my default iTunes for syncing etc. Unfortunately I no longer have access to the desktop that housed my original iTunes so I have followed the instructions to use my ipod as an external disc and transfer the files this way.
These are the instructions I have followed http://lifehacker.com/105256/how-to-copy-songs-from-your-ipod-to-your-pc
There are two issues I see. (1) the ipod control folder is allowing me to see what is housed in the folder but it is slightly greyed out compared to the other folders in the same location.
(2) when I try and copy the music folder to my desktop etc I get a parameter error.
So for example the error I have when transferring to my desktop I get
"Cannot copy OUTO (the file): The parameter is incorrect.
Hopefully someone has seen this before.
thx

No idea on your specific question but if it is of any help here are some articles and links about moving files from the ipod to the computer...
Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=1300144
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
http://discussions.apple.com/thread.jspa?threadID=809624&tstart=0
Also these somewhat dated but still useful internet articles...
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
Good luck!
Patrick

Error when copying files from SSD to HD

Similar Messages

Maybe you are looking for