Error when copying files into iTunes

Been trying to copy some video files into iTunes. I have my iTunes library on an external hard drive. Haven't had any problems with this until today when I try copying videos into iTunes it pops up with an error saying:
"Attempting to copy to the disk "OneTouch4" failed. The disk could not be read from or written to."
I have had no problems with this before. I am running the latest version of iTunes. Any ideas?

Hi.
Tried both suggestions that have been made but the video files will still not copy into iTunes. Interestingly, when I copy podcast files into iTunes it works ok but when I tried the video files again they still get the same error.
Any suggestions?
Thanks.

Similar Messages

  • Error when copying files to iTunes

    I recently ripped a few TV show seasons on to my Macbook but had to convert them because they weren't compatible with iTunes.  The conversion went fine, all the files were perfect and worked when opened in Quicktime.  I have iTunes running on an external hard drive.  When I tried copying the first season of the show, iTunes returned with an error saying "Attempting to copy to "My iTunes Library" (my external hard drive) failed. The disk could not be read from or written."  Then I tried copying the second and third seasons and they both worked, and are now in my iTunes library.  But for some reason i cannot copy the first season.  It always comes back with the error message.  I checked my external hard drive, it has enough space, and is functioning properly.  I haven't had problems with running iTunes on an external hard drive before.  Any suggestions or solutions?

    Hi.
    Tried both suggestions that have been made but the video files will still not copy into iTunes. Interestingly, when I copy podcast files into iTunes it works ok but when I tried the video files again they still get the same error.
    Any suggestions?
    Thanks.

  • Permission Error when copy files into cmsdk using NFS with non admin user

    Hi All,
    We are using CMSDK with NFS protocol and we have created different users with ACL to control different access for users.
    When we copy files into cmsdk folders using one of the admin user this works fine, even a multiple copy works fine. But when we use any non admin user , some time copy commands works but some time it throw a permission deny error. and this is happening very intermittently.
    when we use ftp protocol and ftp file it's all works fine for the both admin & non admin user. Is there any limitation in using CMSDK NFS protocol
    Did any one encouter any similar issue. Any pointers would be of great help.
    Thanks in advance
    Regards,
    Navin

    Hi All,
    We are using CMSDK with NFS protocol and we have created different users with ACL to control different access for users.
    When we copy files into cmsdk folders using one of the admin user this works fine, even a multiple copy works fine. But when we use any non admin user , some time copy commands works but some time it throw a permission deny error. and this is happening very intermittently.
    when we use ftp protocol and ftp file it's all works fine for the both admin & non admin user. Is there any limitation in using CMSDK NFS protocol
    Did any one encouter any similar issue. Any pointers would be of great help.
    Thanks in advance
    Regards,
    Navin

  • After downloading music and dragging into iTunes I end up with multiple copies of the album on my hard drive. I do have the "copy files into iTunes library" checked. When I try to erase one of the copies I end up with red ! in iTunes library.

    Please Help!  After downloading an album and dragging it into itunes I end up having multiple copies of the album on my hard drive.  I do have (under Itunes preferences, advanced) copy songs into itunes library "checked".  I'm sure this is the reason for the multiple copies.  When I try to delete one of the copies of the album and go back to itunes and try playing a song, I get a red exclamtion point next to the song with an error message saying itunes cannot locate file. My questions are, Does Itunes literally make a copy of the song? If so , How do you know which file to delete?

    Sony's own entertainment software on the Vaio plays merry **** with iTunes, worse there's no telling when it will kick in.
    First head over to the Sony Vaio site and get the update for the software, that will stop it from messing with the iTunes database/library files when you connect your iPod.
    http://support.apple.com/kb/TS2715
    http://esupport.sony.com/US/perl/swu-download.pl?mdl=VGNP588EQ&updid=4526&osid=28
    With that stopped you can add the music back without fear of this happening again.

  • Error when copying files from SSD to HD

    Build 9926 (clean install  not upgrade)
    When copying file (drag & drop) from either an SSD>> HD or HD>>SSD I get the below error.  This is definetly build specific and not hardware related.  I have re-installed 9926 from an MSDN ISO 3x with the same results.
    Both drives are local.  Both drives have been checked and are ok.
    Any ideas?

    Hi Dyamixx,
    Please consider to run process monitor to further look at this issue:
    Troubleshooting with Process Monitor
    After that, please upload the trace into OneDrive and then post the shared link here.
    Best regards
    Michael Shao
    TechNet Community Support

  • External Hard drive getting errors when copying files?

    When I'm copying files to my hard drive I keep getting errors that the file is in use.  It was originally stopping at around the 167.8MB mark everytime when I try copying files over and giving me that error.  As this is a 1TB HDD I have no way of backing it up until I get to the US (currently studying in Australia).  So just wondering if anyone had ideas.
    Things I've done:
    - Tried using HDD over Firewire/USB and with other Macs still same errors
    - Tried Disk Utility and sometimes it I get no errors with the disk when I do Repair/Verify Disk or I get an error where the disk can't be unmounted
         - I get that error of unmounting when I normally unmount them and I have to unplug the HDD for it to be readable again.
    - I try copying files from it or to it, and sometimes files copy to my Computer entirely even 2GB ones, but other times it stops at random intervals, and it always   stops when copying files to the HDD that never works, usually stops at random times.  :\
    Any suggestions, help, or programs I can use for HDD repair would be great!
    Thanks a lot,
    godzillafan8686

    Wondering if I could bump this up a bit, still having problems with it.

  • Error when copying files to NAS

    Since upgrading to Mavericks, I frequently get errors in the Finder when copying files to my NAS.
    This never happened under Mountain Lion. The error says "The operation can’t be completed because the item “filename” is in use."
    Most of the time, it does copy over after several attempts. I'd like to know if there is a fix for this, or an update in the works.
    I'm currently on 10.9.
    Thanks!

    ...Just FYI my problem occured even though I had updated to 10.9.2.
    Through trial and error I eventually got my files copied. I detailed what I ended up doing in my post which I referred to above: ( https://discussions.apple.com/thread/5944278 )
    Tx..

  • Error when copying file under Cisco vpn client 5 x64

    Hello Everyone,
    My network scenario:
    INTERNET<--->LoadBalacing( 2 Line) <---> Cisco ASA 5510<--> LAN
    In Load Balancing i configured NAT port 500 and 10000 to Cisco ASA 5510 . On my laptop running windows 7 x64, i setup the vpn client v5 x64 and successfully connect to cisco ASA , I can copy file <1MB via VPN connection but have an trouble when copy file about more than 1MB
    After the error occur, i checked the VPN Client status and it is connected . 
    Could you please help !!!!
    I appreciate all your answer .
    Thanks so much

    No one know the error ?

  • -36 error when copying files

    I'm trying to copy files to an OSX server (v.10.4.11) and often get -36 errors. What does this code mean and how can I solve this issue?
    I tried copying from Windows and other 10.4 computers and it seems to work, but when I copy from OS10.5 clients, I always get this error message.
    Is there a list of error codes I can find somewhere in the support section? I find this rather cryptic for an OS known for its user friendliness.

    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command). Rebuild it to the Pictures Folder. This might overcome the -36 issue.
    (This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.)
    Failing that you're into recovering your Originals from the damaged Library and creating a new Library and starting over from scratch.
    Regards
    TD

  • Error when copying files using WebDav web folder

    When copying a large group of files/folder to a 10gAS portal page we are randomly seeing the error: "An error occurred while copying some or all of the selected files" in Windows Explorer. Clicking "ok" will resume the file copy process.
    The only error I see in the Apache log is:
    [Mon Aug  2 18:00:06 2004] [error] OraDAV: Apache/OCI Error -9999/0: ORADAV: LOB was closed with active write operation
    Any suggestions? I couldn't find anything on metalink, though i have logged an iTAR as well.

    My AirPort Extreme card was replaced on my MacBook by Apple. Prior to this, I was getting odd errors like the one outlined above. I do not receive this issue anymore, and I think I can attribute it to the hardware issue with the card.

  • Error when importing file into CS5

    When I tried to import an Illustrator CS5 file into Flash CS5, I got an error from Windows saying that the program "stopped working" and it was searching for solutions to the problem. When it found no solutions, it said that it had to close the program. I've tried three times now and the same thing keeps happening. Has anyone else encountered this and, if so, do you know how to fix it? Please let me know. Thanks!
    *Pooja*

    Hi there,
    I can reproduce the crash. It's seems to be related to Importing all layers to Stage, and selecting the "Place objects at original position" option. All other combinations seem to not crash, so at least it helps isolate what's happening and provides an option for you to import your artwork and continue with your site. I will file a bug and send this to the correct folks for evaluation - I'm not too sure what the conflict is between the AI file and Flash (it's not due to not having AI installed).
    Thanks for posting it!

  • Time Capsule: "Network name no longer available" error when copying files

    Hi!
    I've come upon this error when trying to copy files from my PC to Time Capsule:
    "Network name no longer available".
    This seems to happen only on folders that have image sequences in them (.sgi image sequences).
    I was planning on transferring the content of my PCs hard drive to Time-Machine in order to smooth out the migration from my old PC to my new MBP but I have to say that I'm a little less confident about using TC as a storage space for my valuable files.
    Is there a work around for this? I have tons of folders with .sgi image sequences and it would be a real shame not to be able to transfer them to Time Capsule.
    Please help!

    Hi… I don’t think there should be any such limitation for the file transfer wirelessly. However it can be issue, as you wired is connect at a speed of 100 Mbps and wireless connects to the max at 54 Mbps. Try to upgrade the firmware. Also try reducing Fragmentation Threshold and RTS threshold by 40 each under advance wireless settings on the router. Go to www.speedguide.net, and download the TCP optimizer. Try reducing the MTU of your wireless adapter. Please Revert Back, even if this resolves your issue.

  • Time Capsule - Network Error when copying files

    Hi
    I'm trying to copy files over to my Time Capsule, the drive is recognised and I can access it, and create folders inside it, but as soon as I start copying files, it tries to copy and sometimes copies 1 or 2 files and then an error message pops up saying
    'Network Error
    There is a problem accessing Z:\Backup'
    where Backup is the folder I'm trying to transfer and Z:\ is the TC drive.
    Please can someone help?
    Thanks

    Hi
    I have solved this by rolling back firmware to 7.3.2 Looks like anything later, and I get this problem.........hope Apple fixes this.

  • Error when importing cd into itunes

    when i insert a purchased cd i cannot import it into librbay for trf to ipod.
    I get an error message
    error occurred while converting file - the required folder cannot be found.
    im a mac virgin and have had great fun with my new mini, it blitzes the pc's but is it possible i cannot rip original cds?

    yes i can view the contents of the cd in i tunes but when i press the import button, i see the error blah blah cannot find folder.....
    because i have the itunes librbary pointing to my external drive (which was formated and connected to my windows pc i think there may be a permissions issue because itunes plays the tracks but i cannot write to the drive of change its contents.
    so this may be the reason, and i do not know the solution.
    maybe i should copy he drive contents to the macs hard disk and re format or something the drive with the mac. ... but i do not know how.
    what do you think? or am i missing the point
    thanks

  • File not found error when checking file into SCC

    I am attempting to setup the built in source code control features in Labview 7.0. I set up the master directory and my working directory. I copied the project I was working on into my working directory and opened the top level V.I.. I was able to successfully add it to the SCC. Then I was able to check it out and modify it. However when I check it back in I get the following error:
    Error 7 occurred at Invoke Node in Version Control CIN.vi->SCC Enter Change Comments.vi->Builtin SCC Checkin.vi->Builtin SCC Checkin GUI.vi->Check In.vi
    Possible reason(s):
    LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use
    \ as path separators on Windows, : on Mac OS, and / on UNIX.
    NI-488: Non-existent board.
    The path for my master directory is C:\temp\TestSCC and the path for the working directory is C:\temp\LVWD. I am able to undo check out, but I cannot check it back in with out getting this error.
    I am using Windows 2000 5.00.125
    Can anyone help?
    Josh

    There are some strange things that occur with the SCC. See the following posting and the comment from NI which suggests to clear the revision history.
    http://exchange.ni.com/servlet/ProcessRequest?RHIV​EID=101&RPAGEID=135&HOID=506500000008000000FEE2000​0&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONT​EXT_QUESTION_0=Error+7+SCC&USEARCHCONTEXT_QUESTION​_S=0
    If the link doesn't work search on terms Error 7 and SCC it will be one of the first ones.
    See also DevZone article titled: "LabVIEW 6.1 Source Code Control Doesn't Recognize Local Changes when Revision History is Used"
    I found that the same thing still ccurred in LabVIEW 7. Not sure about LabVIEW 7.1

Maybe you are looking for

  • Delete of master in master-detail-detail doesn't work

    Hi, JDEV 11g, TP4, ADF BC. I have implemented a master-detail-detail page where master is a form layout and the both details are af:tables. On each level there is a delete button (cascading delete). ActionListener of master =onDeleteHead(). Before de

  • HT4101 PC to iPad Photo Transfers

    An SD card created on my camera successfully works using an Apple Connection Kit. When I copy .jpg files from a Windows Vista PC and use the same transfer process, I get a message "No files to import" on the iPad.  Why?

  • Universes over BEx - LOV questions

    In old school BOBJ when we build a LOV for an object you would normally use the ID (or Key) and then add the description into the LOV so when a user selects the long description actually the ID (or Key) is passed into the SQL and therefore would be m

  • Object format with %

    Hello, I've a numeric dimension object with a default format object = 0,00 %. (The format is set in the designer) But when i use this object in a webi report, I get 0.06% in place of 6.3% ! The original value is 0.063 Few months ago, the report displ

  • Can't load Print Layout Designer from Query Manager

    Hi All, I'm facing this issue when I try to load the Print Layout Designer from Query Manager. I define my own query report and I need to change the layout for the report. When I click on the print layout designer button is nothing happen.  I've chec