Error when copying the queries (urgent)

hi sdners,
when i m trying to copy my existing queries it is giving error mesg.
BEx transport requst is not available and suitable.
Request/task not available.
thanku in advance
rajaram.

EDWIN,
thanks for advice,
actually i already created the request,
i forgotten to relogin.
after relogin solved the problem.
i assigned the points t u

Similar Messages

Getting error when copy the SWRB Transaction.

Hi experts,
This is very urgent requirement.
There is a one transaction in CRM 5.0 that is SWRB(Web Request w/o Item) in service process. This transaction doesn't have any item details,but when I copy that transaction it is showing item details also.
I don't know how this is possible. I should get the copyed transaction also without item level details.
Please clarify if any one knows.
Actually I am using this is SWRB transaction for creating service request.
If any body knows any transaction in crm without item details please let me know.
Thanks and regards
Koti
My mail id is : [email protected]

Hi Koti,
When you create new transaction type by copying the transaction type "SWRB", the new transaction type will have the following transaction categories under "Assignment of Business Transaction Categories" in Customization of Transaction Type.
1.Sales
2.Service Process
3.Business Activity
Since "Sales" is the transaction category used in any business transaction to sell any kind of items. This is the reason why you are getting item details in your newly created transaction type.
So Goto the customization of new transaction type that you have created and remove "Sales" transaction category under "Assignment of Business Transaction Categories", then try to create business transaction with that transaction type, you will not get any item details.
<b>Reward points if it helps</b>
Murali

Error when copying the folder Manager Self-Service in the portal

Good Night.
I am implementing Employee Self-Service and Manager Self-Service
For ESS i did the following:
1. I created a new folder for my project.
2. I copied Employee Self-Service folder from the standard part into my folder.
3. I deleted the pages and worksets that not needed
4. I did the config in the backend and put the pcd in the backend config for it to be displaying the content.
And for MSS I wanted to do the same steps:
But the system display the following message of error:
Error
Source object not found. It may have been deleted.
[Error|http://www.freeimagehosting.net/uploads/0524ec1cc5.jpg]
The steps that i did are:
Portal Content==>Content Provided by SAP==>line_manager=>Right Click -->Copy.
And in the new folder --> Right Click -->Paste.
How can solve this issue?
Kind Regards
Edited by: consultor_ess_mss on Jan 29, 2010 3:11 AM

Hi, I solved this issue using the Content Mirroring Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/9eeb41873b45489c02d989a62cb560/content.htm
In this documentation is all the steps.
Kind Regards.

Error when creating the queries with BI Roles.

Hello,
Business Requirement :
We need to see the BI query reports to show up in User Menu.
Action Taken :
I tried to add the BI queries to BI Role on Menu tab with BW report ID/name by clicking other button. But still not showing up in User Menu.
Anything else I should check? Please advise.

Hi Pranav,
The way in which Sap has customized BEx is it won't show the roles which doesn't have Queries.
The roles tab of Bex shows only show the roles which user is assigned, among the assigned roles only the roles which has queries will be displayed.
Hope this helps,
Thanks,
Rakesh.T

Error when generating the report in Production Server

Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
Samriddhi

Samriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks.

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

"Error when interpreting the runtime repository" BSP Component workbench

Hello,
I have enhance the Component BP_HEAD_SEARCH under some enhancement set in my development system. After transporting all my changes to Quality system, when checking the same development in BSP_WD_CMPWB it is showing an error -- "Error when interpreting the runtime repository" for the same component and enhancement set.
I have copied the repository.xml file from the development and again transported it to Quality system, even then the same error is coming.
Could anyone please suggest how to remove it Quality system, the error is not coming in Development system.
Regards,
Shobhit Srivastava

Hi Pankaj,
Try as above said
find the enhancement Z_* bsp application ,compare it with SAP bsp application.
if the XML file lost,
add the xml file toZ_* BSP application..
If it doesnt work leave it as it is.It will not affect your system.In our system also there is a same error .
Have a nice time!!!!!!!!!

Error -5000 and: Error when loading the transcode setting

For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?

My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems

FM 10 - Serious Internal Error When Copying/Pasting

We regularly encounter a serious internal error when copying text from one FM doc to another. We also get the error (occasionally) when we run FrameScript. Does anyone know what could cause this? It appears to happen randomly (i.e. it doesn't appear to be tied to one particular .book or .fm file). We use FM 10, Windows 7, 64-bit OS, and have 4GB of RAM installed. Help please!

We have version 10.0.2.419. There is nothing out of the ordinary with the content except that it is typically in track text edits. We cannot reproduce the crash on demand. It seems to happen randomly and to some users more than others.

How to troubleshoot SQL error when copying cube

I was successful in creating Info Package and running it to copy data frin cube 1 to cube2. However, I get an error when
Running the package. My source cube has 1.9 million rows. However, Info Package only loaded 30,120 records. Looking in monitor logs, it shows me following error stack:
System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
SQL Error 0
Unknown error in SQL Interface
Errors in source system
When I click on long text button for Unknown error in SQL interface:
The SQL interface of the application server (DBSL) has reported an unknown error. This error can be caused by:
- Overflows when aggregated data is read from the database in ABAP. If this occurs, the definition for the corresponding key figure must be changed.
- Internal errors
It seems to be some kind of Overflow error. Is there any way to get more information on the cause
Of this erroru2026.
THANKS A LOT.

I tried SM50, it shows me all processes, but I still cannot figure how to set developer trace. Following is detailed information on what I am doing in copy of cubes and errors I am getting:
Subject: Troubleshoot Copy of Cubes
I have tried to copy several cubes on my BI 7.0 and all of them same error, so I am wondering whether I am doing something fundamentally wrong.
                System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
                SQL Error 0
                Unknown error in SQL Interface
                Errors in source system
After error occurs I get following message in mail:
          The error occurred in Extractor.
           Refer to the error message.
                 Procedure
             How you remove the error depends on the error message.
                 Note
          If the source system is a Client Workstation, then it            is possible that the file that you wanted to load was being edited
at the time of the data request. Make sure that the file is in
the specified directory, that it is not being processed at the
I looked in SM21, system logs, whenever error occurs, I see the u201C
Database selection with invalid cursor &5&5
The database interface was called by a cursor (in a FETCH or CLOSE cursor operation) that is not flagged as opened. This can occur if a COMMIT or ROLLBACK was executed within a SELECT loop (which closes all opened cursors), followed by another attempt to access the cursor (for example, the next time the loop is executed).
I DO NOT UNDERSTAND WHEN I AM COPYING FROM CUBE, WHY SAP BW will generate u201Cinvalid cursoru201D message. Not sure whether it is normal, i.e., not a real error,
My cube copying (from cube 1 to cube 2) is a straightforward procedure:
a.     Select Copy from Cube 1 and create Cube 2.
b.     Create Export Data Source from Cube 1 Menu.
c.     From Cube 2 menu, Create Update rules, In update rules select DataSource as 8Cube1.
d.     Create an Info Package for 8Cube1 under Infosource/DataSource and then run the package.
Certain no of records e.g.. 3248 or so get loaded and then the error messages are generated, why?
Really appreciate any help. I tried SM37, does not give any clue. I also Tried SM50, it shows me the process, but I still cannot figure how to generate developer trace.
Since behavior is same for several cubes I tried, something else also needs to be done, I do not know what???

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

'Error when generating the selection screen "0500"

Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
Sachin

Hi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini

Error when generating the selection screen '0005'of report 'XYZ'

Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
Saurabh

If you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

! Error when copying song from Purchased to IPod play list. How to fix?

! Error when copying song from Purchased to IPod play list. How to fix?

Hi
Try the iPod for windows forum http://discussions.apple.com/forum.jspa?forumID=826
Tony

Error when copying the queries (urgent)

Similar Messages

Maybe you are looking for